[please help] [ROOT PROBLEM] [NEED SYSTEMUI.APK] Navigational Keys Gone - G 2014 Q&A, Help & Troubleshooting

Yesterday, I downloaded the app softkeyz and used it to change my Navigational Keys to something different.
But after I rebooted, instead I saw that my status bar was gone and that my keys are gone. I also couldn't change my wallpaper.
So, After comprehensive searching on XDA, I figured out it was a SYSTEMUI.apk problem. But I couldn't find a moto G 2014 systemui.apk to install.
So now I'm looking for advice, a moto G systemuiapk I'm also wondering if flashing a theme will help. Thanks in Advance!

Current Rom ?
Try flashing some different rom.

@ArtRahul
I have never really flashed a rom. But I have TWRP, what rom do I flash?

MotorolaMadMan said:
@ArtRahul
I have never really flashed a rom. But I have TWRP, what rom do I flash?
Click to expand...
Click to collapse
Whichever you want, pal. Try with Cyanogenmod to begin. Peek over here: http://forum.xda-developers.com/moto-g-2014/development if you want
***Find tutorials before if you're not sure of what to do***

MotorolaMadMan said:
@ArtRahul
I have never really flashed a rom. But I have TWRP, what rom do I flash?
Click to expand...
Click to collapse
Yup, just go download any custom rom with their respective gapps (CynogenMod 12.1 is recommended though), and then
Steps :
1. Backup your current rom setup,(helps if something goes wrong )
2. Wipe Dalvik Cache, Cache, System and Data, from wipe [Do NOT wipe internal/external storage].
3. Install(flash) the rom zip and gapps.
4. Again wipe cache and dalvik cache.
5. You are ready to reboot to system.
:good:

Well, flashing a custom rom isn't the exact solution @op if you haven't fixed this problem yet and don't wish to flash a custom rom, what firmware were you using?

Vatsal said:
Well, flashing a custom rom isn't the exact solution @op if you haven't fixed this problem yet and don't wish to flash a custom rom, what firmware were you using?
Click to expand...
Click to collapse
Do you mean build number?
It is : LXB22.99-24.12

MotorolaMadMan said:
Do you mean build number?
It is : LXB22.99-24.12
Click to expand...
Click to collapse
Reflash the firmware and root it again
Or simply push SystemUI.apk to system via adb and give it right permissions.
Sent from my Moto G 2014 using Tapatalk

Vatsal said:
Reflash the firmware and root it again
Or simply push SystemUI.apk to system via adb and give it right permissions.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
I can't find the systemui. Apk

MotorolaMadMan said:
I can't find the systemui. Apk
Click to expand...
Click to collapse
Reflash the firmware and root it once again
Good luck!

Related

[ROM] 98.30.1 Stock, Vzw Removal, Flashable Recoveries

*removed*
batakang ftp is down permanently.
link to my razr m stuff: https://drive.google.com/folderview?id=0B-53iD-71B3iX0dXU2FTYjRjN3M&usp=sharing
link to my razr hd stuff: https://drive.google.com/folderview?id=0B-53iD-71B3iZmRMT0x6dTlUU1k&usp=sharing
How to install your ROM? Instructions please.
BastaS said:
How to install your ROM? Instructions please.
Click to expand...
Click to collapse
How to flash a rom:
rooted:
install safestrap
open safestrap and install recovery
reboot and enter recovery (select recovery on safestrap splash screen)
make a backup (optional, recommended)
create a rom slot
wipe everything except internal and external storage
install rom
bootloader unlocked:
install custom recovery (twrp recommended)
reboot and enter recovery (press and hold volume up + power hard keys while booting)
make a backup (optional, recommended)
wipe everything except internal and external storage
mount system
install rom
can i flash it to the stock rom slot?
BastaS said:
can i flash it to the stock rom slot?
Click to expand...
Click to collapse
no
Q9Nap said:
no
Click to expand...
Click to collapse
Can someone tell me which files I should flash? Are any of these files full ROM zips or do I have to flash multiple zips? Or are these only for locked bootloaders? I'm unlocked.
Duckie1217 said:
Can someone tell me which files I should flash? Are any of these files full ROM zips or do I have to flash multiple zips? Or are these only for locked bootloaders? I'm unlocked.
Click to expand...
Click to collapse
you can flash any of the zips with "system" in the name; the names are self explanatory.
it isn't necessary to flash boot (but doesn't hurt) unless you are upgrading from an earlier stock build or coming from an aosp/cm/cm-variant build.
it isn't necessary to flash radio (but doesn't hurt) unless you are upgrading from an earlier stock build or have done the gsm hack and want to undo it.
Q9Nap said:
you can flash any of the zips with "system" in the name; the names are self explanatory.
it isn't necessary to flash boot (but doesn't hurt) unless you are upgrading from an earlier stock build or coming from an aosp/cm/cm-variant build.
it isn't necessary to flash radio (but doesn't hurt) unless you are upgrading from an earlier stock build or have done the gsm hack and want to undo it.
Click to expand...
Click to collapse
I tried one earlier but my device would just power back off after rebooting. I'll try another package.
Duckie1217 said:
I tried one earlier but my device would just power back off after rebooting. I'll try another package.
Click to expand...
Click to collapse
remember to mount system before installing the zip when using twrp/cwm.
Q9Nap said:
remember to mount system before installing the zip when using twrp/cwm.
Click to expand...
Click to collapse
I mounted the system. The screen keeps flashing over and over again. No boot animation. Kernel issue?
Duckie1217 said:
I mounted the system. The screen keeps flashing over and over again. No boot animation. Kernel issue?
Click to expand...
Click to collapse
what did you have installed before trying to flash? as i mentioned, if you're coming from a stock build prior to 98.30.1 or from aosp/cm, you need to flash the boot image. if you're not even getting to the bootanimation, this is likely the issue. if you're coming from an earlier stock build, you should also flash the radio. if you boot loop on the animation, you need to wipe data, cache, and dalvik cache.
Q9Nap said:
what did you have installed before trying to flash? as i mentioned, if you're coming from a stock build prior to 98.30.1 or from aosp/cm, you need to flash the boot image. if you're not even getting to the bootanimation, this is likely the issue. if you're coming from an earlier stock build, you should also flash the radio. if you boot loop on the animation, you need to wipe data, cache, and dalvik cache.
Click to expand...
Click to collapse
Oh, of course. Sorry about that. I'll update here.
Duckie1217 said:
Oh, of course. Sorry about that. I'll update here.
Click to expand...
Click to collapse
Did you have any Luck ?
I am having the same issues, coming from dhacker KK.
Gonna got back to clean stock and try again tomorrow.
Germanese said:
Did you have any Luck ?
I am having the same issues, coming from dhacker KK.
Gonna got back to clean stock and try again tomorrow.
Click to expand...
Click to collapse
Oh, yeah. I got it running. Works well. Just gotta follow those instructions. Not like a typical flash.
Germanese said:
Did you have any Luck ?
I am having the same issues, coming from dhacker KK.
Gonna got back to clean stock and try again tomorrow.
Click to expand...
Click to collapse
instructions added to op, hope this helps.
This rom hasn't massage app ?
And how i recive massage ?
kiba99 said:
This rom hasn't massage app ?
And how i recive massage ?
Click to expand...
Click to collapse
Handsent on play.
kiba99 said:
This rom hasn't massage app ?
And how i recive massage ?
Click to expand...
Click to collapse
if you know of a good massage app, i'd like to know what it is, especially if it gives happy endings lol.
if you mean "message" which i imagine you do, there are various messaging apps available on the play store, the most notable being google hangouts which now has sms integration.
the purpose of this rom is to remove all unnecessary apps that can be downloaded from the play store, so you're not stuck with a bunch of bloat that you don't want or need. there are replacements for the phone, contacts, camera, and gallery as well...
Just before I flash this, does Wifi Tether work? Has anyone tried it?
Thanks!
---------- Post added at 10:00 PM ---------- Previous post was at 09:10 PM ----------
Wi-Fi won't turn on for me after a clean install. Weird.
Sent from my Nexus 7 using xda app-developers app
Coronado is dead said:
Just before I flash this, does Wifi Tether work? Has anyone tried it?
Thanks!
---------- Post added at 10:00 PM ---------- Previous post was at 09:10 PM ----------
Wi-Fi won't turn on for me after a clean install. Weird.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
yes, wifi tether is unlocked, as mentioned in the op.
as for wifi, there's no reason it shouldn't work, as i didn't modify anything that has to do with it. i'd recommend wiping everything except internal and external storage, then flashing boot, system, and radio to ensure a clean install. please post if you still have issues after doing that.

[Help] X-Reality Android Upgrading

I installed the ported x-reality from z2 into my xperia sp c5303 12.1.A.1.205
and now its always android upgrading every boot ,., anyone know how to fix this? its just very annoying everytime i reboot or boot android is upgrading xD ,., the x-reality works,,., the only problem is the android upgrading
kenjan16 said:
I installed the ported x-reality from z2 into my xperia sp c5303 12.1.A.1.205
and now its always android upgrading every boot ,., anyone know how to fix this? its just very annoying everytime i reboot or boot android is upgrading xD ,., the x-reality works,,., the only problem is the android upgrading
Click to expand...
Click to collapse
Boot in to recovery and do a wipe of cache and dalvik cache. This could resolve problem. :good:
kelumsd said:
Boot in to recovery and do a wipe of cache and dalvik cache. This could resolve problem. :good:
Click to expand...
Click to collapse
i tried it,.,flash the x-reality in cwm then wipe it like you said,., problem persist,.,
should i reflash the x-reality then wipe,., or wipe then reflash?
kenjan16 said:
i tried it,.,flash the x-reality in cwm then wipe it like you said,., problem persist,.,
should i reflash the x-reality then wipe,., or wipe then reflash?
Click to expand...
Click to collapse
Bro, can you uninstall it? Then I can give step by step instructions again to resolve this problem.
kelumsd said:
Bro, can you uninstall it? Then I can give step by step instructions again to resolve this problem.
Click to expand...
Click to collapse
Currently im charging it,.,now 12%,., when it's half or full charge i will try to uninstall it by flashing the stock rom
kenjan16 said:
Currently im charging it,.,now 12%,., when it's half or full charge i will try to uninstall it by flashing the stock rom
Click to expand...
Click to collapse
No. You dont need to flash stock rom. Do you have Stock Settings.apk? If yes I'll learn to you. If not I can upload it for you. Can I know what firmware version you are running? .205 or .207?
kelumsd said:
No. You dont need to flash stock rom. Do you have Stock Settings.apk? If yes I'll learn to you. If not I can upload it for you. Can I know what firmware version you are running? .205 or .207?
Click to expand...
Click to collapse
i dont have the stock settings.apk ,., im running .205,., and also just for information ,., i have a x-reality on/off at the settings
kenjan16 said:
i dont have the stock settings.apk ,., im running .205,., and also just for information ,., i have a x-reality on/off at the settings
Click to expand...
Click to collapse
First of all, open your build.prop file and fine for these lines.
ro.service.swiqi3.supported=true
persist.service.swiqi3.enable=1
then delete these lines and save. DON'T reboot.
Now push attached Settings.apk to system/app and set permissions as rw--r--r--. Now reboot and check if still showing Android is upgrading.
Please check and confirm.
Don't forget to press Thanks if I helped !
kelumsd said:
First of all, open your build.prop file and fine for these lines.
ro.service.swiqi3.supported=true
persist.service.swiqi3.enable=1
then delete these lines and save. DON'T reboot.
Now push attached Settings.apk to system/app and set permissions as rw--r--r--. Now reboot and check if still showing Android is upgrading.
Please check and confirm.
Don't forget to press Thanks if I helped !
Click to expand...
Click to collapse
still android upgrading ,., why do i have to change my settings.apk?
kenjan16 said:
still android upgrading ,., why do i have to change my settings.apk?
Click to expand...
Click to collapse
Stock settings.apk may not have a point for X-Reality in Display settings. So it must be replaced to a ported version.
If there is still Android is upgrading, you should have to flash stock ftf. Flash if then root it via Towelroot, then inform me. I'll guide you how to get X-Reality option without any problem :laugh: :laugh:
Hey man the problem has nothing to do with the zip itself. Use Rootexplorer or something to go to data/app. There you must search for any .odex files (if you have deodexed ROM). Delete those and go to recovery to wipe dalvik cache again. Now you won't see android upgrading anymore.
kenjan16 said:
I installed the ported x-reality from z2 into my xperia sp c5303 12.1.A.1.205
and now its always android upgrading every boot ,., anyone know how to fix this? its just very annoying everytime i reboot or boot android is upgrading xD ,., the x-reality works,,., the only problem is the android upgrading
Click to expand...
Click to collapse
Do you have lucky patcher installed?
If yes uninstall it and u r good to go.
Hit thanks if I helped
Tech N You said:
Do you have lucky patcher installed?
If yes uninstall it and u r good to go.
Hit thanks if I helped
Click to expand...
Click to collapse
Just uninstalling wont directly work because the ROM still has odex files in data/app
Nanostray said:
Just uninstalling wont directly work because the ROM still has odex files in data/app
Click to expand...
Click to collapse
Can i still use lucky patcher? or if i use lucky patcher the android upgrading will be back again
Make a nandroid backup before using lucky patcher. Now install it and and then reboot into recovery and wipe dalvik cache then uuse lucky patcher.
Sent from my C5302 using XDA Free mobile app
kenjan16 said:
Can i still use lucky patcher? or if i use lucky patcher the android upgrading will be back again
Click to expand...
Click to collapse
Yes of course. If you just delete those .odex files lucky patcher created in data/app and wipe dalvik and reboot, you'll only have to patch your apps again, no data lost
Nanostray said:
Yes of course. If you just delete those .odex files lucky patcher created in data/app and wipe dalvik and reboot, you'll only have to patch your apps again, no data lost
Click to expand...
Click to collapse
I see now that the problem is with Odex files ,., ive deleted them data/app ,., the android upgrading still exist then i look at the system/app there's odex files too,.,(when i flash stock ftf i did not wipe cache appslog and data ) can i delete them,., or if delete them all of my previous data on my cp will be lost ?
Is it possible to make a deodexed version of this port?,., if yes ,.,. Can someone make a deodexed version of this port?
kenjan16 said:
I see now that the problem is with Odex files ,., ive deleted them data/app ,., the android upgrading still exist then i look at the system/app there's odex files too,.,(when i flash stock ftf i did not wipe cache appslog and data ) can i delete them,., or if delete them all of my previous data on my cp will be lost ?
Click to expand...
Click to collapse
You can delete those too if you have a deodexed ROM. Did you patch a system app, or did you use freedom?
Use kamone tool to deodex the ROM aand then push them back or make flashable zipp
Sent from my C5302 using XDA Free mobile app

[ROM][Lollipop 5.0.1]Pure Stock LRX22C

...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror
This flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like TWRP/CWM) prevents me from using a PC,
If these zip flashes also the recovery back to stock, then we cant go back/revert back from Nandroid without a PC..
Just a simple question, but I put mu reasons why.. Heheh.
Thanks by the way for sharing the ROM..
_________________________________________________
Device: Google Nexus 4 (LG-E960) 16GB (MAKO)
ROM: SimpleAOSP-L-ROM (Stable Build 7)
Kernel: Stuxnet v4.5 (3.4.105)
Gapps: PA-Gapps-5.0.1-BETA4 (MINI)
________________________________________________
yethz said:
this flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like twrp/cwm) prevents me from using a pc,
if these zip flashes also the recovery back to stock, then we cant go back/revert back from nandroid without a pc..
Just a simple question, but i put mu reasons why.. Heheh.
Thanks by the way for sharing the rom..
_________________________________________________
device: google nexus 4 (lg-e960) 16gb (mako)
rom: simpleaosp-l-rom (stable build 7)
kernel: stuxnet v4.5 (3.4.105)
gapps: pa-gapps-5.0.1-beta4 (mini)
________________________________________________
Click to expand...
Click to collapse
no, it does not
Can we get a different host? Its asking me to sign in through facebook/twitter/instagram etc if I want to download.
Thanks for the making it flashable though!
aidinvm_ultimate said:
no, it does not
Click to expand...
Click to collapse
I think it is necessary to remove recovery-from-boot.p from system
pincher65 said:
I think it is necessary to remove recovery-from-boot.p from system
Click to expand...
Click to collapse
this is safe to flash rom even without "recovery-from-boot" but all in all this Rom does not rewrite your current recovery
Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?
theo28 said:
Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?
Click to expand...
Click to collapse
Yes, as you said
aidinvm_ultimate said:
...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror
Click to expand...
Click to collapse
Works exactly as mentioned and it took me about 9 minutes to reboot and maybe another 10 to do CF root. Good job!
Can I flash a custom kernel over this?
GorfDroid said:
Can I flash a custom kernel over this?
Click to expand...
Click to collapse
Yeap, you can treat It like any other rom, but for safty always do nandbackup of system before.
Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?
i'm getting battery usage data not available when i check the battery status in notifications
Many thanks
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.
swimma said:
Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?
Click to expand...
Click to collapse
No,there is no radio included, you have to flash it desperately
mynickname said:
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.
Click to expand...
Click to collapse
you're welcome bro
ankuzero said:
i'm getting battery usage data not available when i check the battery status in notifications
Click to expand...
Click to collapse
plz do wipe cache (or even factory reset if you come from custom rom), every thing is Ok here
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?
aidinvm_ultimate said:
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?
Click to expand...
Click to collapse
I tried the other stock Lollipop floating around and had the same issue. Ended up having to pull the image directly from Google. It's good to go now.
No other mods were flashed.
SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
I had the same issue.
I updated to the latest TWRP, I then factory wiped. cleaned cache, and dalvik.
Then installed this stock rom from scratch with the instructions here and it fixed the issue.
Give it another go...
I am trying to remember the exact details. But this was almost 2 weeks ago, and I might be missing a step?
Hope not...

[ROM] 100% Stock - G920T_PD1_Stock_DeOdexed_ROM

Download:
- G920T_PD1_Stock_DeOdexed_ROM.zip
- G920T_PD1_Stock_DeOdexed_Debloated_ROM.zip (removed Google apps and a few Samsung apps)
Instructions:
1. Update to Official Tmo PD1 6.0 using this: http://forum.xda-developers.com/tmo...20t-android-6-0-1-marshmallow-update-t3356838
2. Download then Flash this version of TWRP via Odin: twrp-3.0.2-1-zeroflte.tar.md5
3. Place the ROM and the latest [BETA][2016.03.30] SuperSU.zip onto your device.
4. Flash the ROM with TWRP then immediately flash the SuperSu.zip (use system-less mode only) and reboot.
5. Once complete the ROM will pause on the T-Mobile splash screen for 10 - 15 mins before completely booting.
6. Done!
Notes:
1. The ROM will automatically wipe System and User Data for a clean install.
2. The ROM uses the stock PD1 kernel with Chainfire's sepolicy patch.
3. Flash SuperSu in "system-less" mode only. The ROM will bootloop if you flash SuperSu in "system" mode.
Cant wait
Sent from my SM-G920T using XDA-Developers mobile app
General_Mayhem said:
Cant wait
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
The link is now live. Enjoy!
muniz_ri said:
The link is now live. Enjoy!
Click to expand...
Click to collapse
Anyway to maybe remove the data wipe? or add two versions? System wipe makes sense obviously lol unless there's no way this would work over stock rooted lollipop
muniz_ri said:
Download:
G920T_PD1_Stock_DeOdexed_ROM.zip
Instructions:
1. Update to Official Tmo PD1 6.0 using this: http://forum.xda-developers.com/tmo...20t-android-6-0-1-marshmallow-update-t3356838
2. Download then Flash this version of TWRP via Odin: twrp-3.0.2-1-zeroflte.tar.md5
3. Place the ROM and the latest [BETA][2016.03.30] SuperSU.zip onto your device.
4. Flash the ROM with TWRP then immediately flash the SuperSu.zip and reboot.
5. Once complete the ROM will pause on the T-Mobile splash screen for 10 - 15 mins before completing booting.
6. Done!
Notes:
1. The ROM will automatically wipe System and User Data for a clean install.
2. The ROM uses the stock PD1 kernel with Chainfire's sepolicy patch.
Click to expand...
Click to collapse
May I ask what you used to Deodex? I have also Deodexed my device, but had to brutally debloat it. Settings.apk didn't function correctly, syscope, smartcardmanager and a couple of others forced closed repeatedly.. I'll take a look at this, but wondering what you used to Deodex this..
Zaphodspeaks said:
May I ask what you used to Deodex? I have also Deodexed my device, but had to brutally debloat it. Settings.apk didn't function correctly, syscope, smartcardmanager and a couple of others forced closed repeatedly.. I'll take a look at this, but wondering what you used to Deodex this..
Click to expand...
Click to collapse
Yes, I used this tool: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
I tried SuperR's Kitchen with no luck. Surprisingly, SVADEV's tool seemed to handle the job in a smarter way at least for this build.
muniz_ri said:
Yes, I used this tool: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
I tried SuperR's Kitchen with no luck. Suprisingly, SVADEV's tool seemed to handle the job in a smarter way at least for this build.
Click to expand...
Click to collapse
Super R was the first thing I tried.. In the Tools folder he has old and new oatdex files.. I tried both with little success.. I had to brutally debloat and lost my finger print scanner.. Setting.apk would force close on security settings..
Thanks for the link.. I'll take a look at it..
I don't have the time to flash the ROM, but I'll install it later on tonite..
Edit: you could copy the oat2dex file from that Deodexer script to Super R, in the Tool/Smali directory.. that should allow proper deodexing in Super R..
anaveragehuman said:
Does this ROM break encryption? Thanks!
Click to expand...
Click to collapse
My guess is that it will break encryption since the zip wipes data (data partition is encrypted)...but if it doesn't, who knows if the phone will boot. You will need a usb-otg to flash from since twrp wont be able to read the SD card partition.
I do know that I could not encrypt my phone with the patched kernel, I had to use the stock kernel. Once encrypted, I was able to flash super su to root the phone, but twrp was all kinds of red because it could not mount the data partition. Since it won't mount, you don't have a way to "nandroid backup" your phone.
Flashfire might be the solution for backing up encrypted phones, I made 2 backups with flashfire, though I haven't tried to restore. I think flashfire works with the encryption because it does not reboot until after its done, and it seems the phone is decrypted when it runs.
Sent from my SM-G925T using Tapatalk
Did a complete wipe, already had the updated bootloader and was previously on Stock 6.01. Did a total wipe in TWRP, flashed the ROM, wiped Dalvik/Art and Cache again to be sure.. Then rebooted.. Sitting on 20 mins and no boot... Stuck in a bootloop..
I got a boot loop when i flashed TWRP
anaveragehuman said:
I could have sworn TWRP had a way to mount encrypted partitions now. Did it ask you for a password when you entered TWRP?
Click to expand...
Click to collapse
it does not
yerimil said:
I got a boot loop when i flashed TWRP
Click to expand...
Click to collapse
Follow directions.
muniz_ri said:
Follow directions.
Click to expand...
Click to collapse
well i did... step 2 say flash TWRP.. step 3 then says download and then place rom on your phone. how can i place it if im in a boot loop.. im just following it in order bruh..
yerimil said:
well i did... step 2 say flash TWRP.. step 3 then says download and then place rom on your phone. how can i place it if im in a boot loop.. im just following it in order bruh..
Click to expand...
Click to collapse
The instructions tell you to use and links to a specific version of TWRP, yet you somehow missed that.
You stated in this post that you used Twrp 3.0 and only used the Twrp version linked in the instructions after you bootlooped, smh: http://forum.xda-developers.com/tmo...stuck-loop-t3360447/post66404317#post66404317
@muniz_ri hey mate good deblaoted rom do u by any chance have a flashable to return the volte files for tmobile thanks in advance
genuine55 said:
@muniz_ri hey mate good deblaoted rom do u by any chance have a flashable to return the volte files for tmobile thanks in advance
Click to expand...
Click to collapse
Thanks but I didn't realize that I removed volte. Can you see if it works with the non-debloated version?
Sent from my SM-G920T using XDA-Developers mobile app
muniz_ri said:
Thanks but I didn't realize that I removed volte. Can you see if it works with the non-debloated version?
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
I will check in a few and report back
Sent from my SM-G920T using Tapatalk

SuperSU problem

I flashed untouched stock lollypop in my moto x ghost...it flashed well,,but the problem is SuperSU is not installing,I tried both ways,via twrp and direct install from playstore,even not worked...without SuperSU,,phone can't be rooted...plz solve my problem..
Spiderman1992 said:
I flashed untouched stock lollypop in my moto x ghost...it flashed well,,but the problem is SuperSU is not installing,I tried both ways,via twrp and direct install from playstore,even not worked...without SuperSU,,phone can't be rooted...plz solve my problem..
Click to expand...
Click to collapse
You must have to reinstall the ROM
Do this
Go to recovery
Make full wipes
Install SuperSU
Install the rom untouched
Install SuperSU again
Wipe cache and dalvik
Reboot
So,before rom installation also,,SuperSU would must be flash??i thought only rom installation after....thanks dude...I will try
Spiderman1992 said:
So,before rom installation also,,SuperSU would must be flash??i thought only rom installation after....thanks dude...I will try
Click to expand...
Click to collapse
Yep, the SU must be installed before in that ROM, is a bug. Usually it must be installed after but in this case not.
Thank you..it worked
YedanyXD said:
Yep, the SU must be installed before in that ROM, is a bug. Usually it must be installed after but in this case not.
Click to expand...
Click to collapse
Thanks bro...it worked..

Categories

Resources