HTC One (M7) won't update using RUU. - One (M7) Q&A, Help & Troubleshooting

Hello!
I have an Asian HTC One m7 that doesnt want to use 4G, and I live in europe. How can I ''convert'' the htc one from asian to european?
Can I do it using a .exe RUU or is there a better method?
Thanks alot for the help!

BLoveA said:
Hello!
I have an Asian HTC One m7 that doesnt want to use 4G, and I live in europe. How can I ''convert'' the htc one from asian to european?
Can I do it using a .exe RUU or is there a better method?
Thanks alot for the help!
Click to expand...
Click to collapse
Post a "fastboot getvar all" but remove your serial no and IMEI. That way we'll be able to tell what can be done to help you

donkeykong1 said:
Post a "fastboot getvar all" but remove your serial no and IMEI. That way we'll be able to tell what can be done to help you
Click to expand...
Click to collapse
Here you go!
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.30
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s

Well, you already have European firmware and radio. Go to settings/mobile data/prefered network, and see if 2g/3g/4g is enabled. And remove your IMEI and serial no from your post. You don't want those two to be widely known [emoji6]

donkeykong1 said:
Well, you already have European firmware and radio. Go to settings/mobile data/prefered network, and see if 2g/3g/4g is enabled. And remove your IMEI and serial no from your post. You don't want those two to be widely known [emoji6]
Click to expand...
Click to collapse
I have checked the 4G, and tried force using 4G, but that didnt work either
Sendt fra min HTC One via Tapatalk

BLoveA said:
I have checked the 4G, and tried force using 4G, but that didnt work either
Sendt fra min HTC One via Tapatalk
Click to expand...
Click to collapse
Maybe your sim card doesn't support 4G. Can you try it in another phone and see if 4G works?

donkeykong1 said:
Maybe your sim card doesn't support 4G. Can you try it in another phone and see if 4G works?
Click to expand...
Click to collapse
Yes, the simcard does support 4G, works on my other phones
Sent from my iPhone using Tapatalk

BLoveA said:
Yes, the simcard does support 4G, works on my other phones
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Does 3G work? Or any data network? If it does, maybe you should ask your service provider for 4G settings for your phone

donkeykong1 said:
Does 3G work? Or any data network? If it does, maybe you should ask your service provider for 4G settings for your phone
Click to expand...
Click to collapse
Yes, E, 3G, H and H+ works, only 4G that doesn´t work! But I will check with the service provider tomorrow and ask

donkeykong1 said:
Well, you already have European firmware and radio. Go to settings/mobile data/prefered network, and see if 2g/3g/4g is enabled. And remove your IMEI and serial no from your post. You don't want those two to be widely known [emoji6]
Click to expand...
Click to collapse
Hi!
have bought a used HTC One (M7) that is AT&T unlocked. Now I live in Tunisia (North Africa) and i can't update my software version "4.18.502.7".
This is my bootloader status:
***RELOCKED***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.56.000
RADIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
I tried to install the following RUU: "RUU_M7_UL_L50_SENSE60_MR_BrightstarUS_WWE_7.17.15 40.7_Radio_4T.35.3218.16_10.33Q.1718.01L_release_4 20191_signed_2"
I had changed my cid to match that of Brightstar (BS_US001, or sth like it) but didn't work. I kept encountering "error 155".
I just want to find a compatible RUU and to be able to update (getting rid of AT&T bloatware would be a plus).
Please help!
Thank you!

akskizo said:
Hi!
have bought a used HTC One (M7) that is AT&T unlocked. Now I live in Tunisia (North Africa) and i can't update my software version "4.18.502.7".
This is my bootloader status:
***RELOCKED***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.56.000
RADIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
I tried to install the following RUU: "RUU_M7_UL_L50_SENSE60_MR_BrightstarUS_WWE_7.17.15 40.7_Radio_4T.35.3218.16_10.33Q.1718.01L_release_4 20191_signed_2"
I had changed my cid to match that of Brightstar (BS_US001, or sth like it) but didn't work. I kept encountering "error 155".
I just want to find a compatible RUU and to be able to update (getting rid of AT&T bloatware would be a plus).
Please help!
Thank you!
Click to expand...
Click to collapse
You must be connected to the at&t network to receive ota update for the at&t version. If you want to convert to the Brightstar version using that RUU you'll first need to update your firmware to at least 6.xx.1540.x. Look in my dev edition thread (link in my signature) you'll find all the dev edition files.

alray said:
You must be connected to the at&t network to receive ota update for the at&t version. If you want to convert to the Brightstar version using that RUU you'll first need to update your firmware to at least 6.xx.1540.x. Look in my dev edition thread (link in my signature) you'll find all the dev edition files.
Click to expand...
Click to collapse
Thanks, man! I will try that

akskizo said:
Thanks, man! I will try that
Click to expand...
Click to collapse
make sure you use a full firmware and not a firmware patch (ota firmware).
The 6.07.1540.2 should work fine

alray said:
make sure you use a full firmware and not a firmware patch (ota firmware).
The 6.07.1540.2 should work fine
Click to expand...
Click to collapse
Thanks! Can I install the version you sent me (Brighstar) without changing the "cid" into "BS_US001" ?
(mine is CID-11111111)

akskizo said:
Thanks! Can I install the version you sent me (Brighstar) without changing the "cid" into "BS_US001" ?
(mine is CID-11111111)
Click to expand...
Click to collapse
yes, supercid is fine.

alray said:
yes, supercid is fine.
Click to expand...
Click to collapse
Thank you, mate! I just can't say it enough.
Flashed the firmware, then applied the RUU. Worked like a charm. Now I'm updating OTA

akskizo said:
Thank you, mate! I just can't say it enough.
Flashed the firmware, then applied the RUU. Worked like a charm. Now I'm updating OTA
Click to expand...
Click to collapse
you're welcome :good:

Related

[Q] revone error code 1 when trying to s-off

hi, I am trying to s-off my htc one according to these instructions http://forum.xda-developers.com/showthread.php?t=2365506
When it comes to entering the command "./revone -P" I receive error code 1 (note: not -1).
Rebooting and going through the steps does not help. I've searched everywhere and cannot find a resolution in regards to this error code. Any help would be super appreciated. Thanks
Are you rooted & running the commands in 'su' mode?
Sent from my HTC One using xda premium
mattjcl said:
hi, I am trying to s-off my htc one according to these instructions http://forum.xda-developers.com/showthread.php?t=2365506
When it comes to entering the command "./revone -P" I receive error code 1 (note: not -1).
Rebooting and going through the steps does not help. I've searched everywhere and cannot find a resolution in regards to this error code. Any help would be super appreciated. Thanks
Click to expand...
Click to collapse
Which hboot version do you have?
redbull123 said:
Which hboot version do you have?
Click to expand...
Click to collapse
hboot version 1.44. phone is rooted :s
mattjcl said:
hboot version 1.44. phone is rooted :s
Click to expand...
Click to collapse
I'm running into the same problem. Nothing I've seen seems to help. Rooted, and on hboot version 1.44 as well.
Try, try, and try some more. Its a developers preview of an exploit. It doesn't work every time and sometimes take multiple attempts. Just keep trying.
AT&T HTC One
Baadnewz's InsertCoin 3.0-14
Flar2's Bulletproof 4.3
Nothing I've tried is working for me. In my searching though I did find that T-Mobile phones are suspected to have had an update that patches the exploit. It doesn't bump the hboot number, but seems to prevent the current version of revone from working. Apparently it was an OTA update but new phones seem to be shipping with it.
For now I'll keep trying periodically, and hope someone discovers a workaround.
old:The sam Issue here with HBoot-1.44.0000 | revone v0.2.1
Originally Posted by designgears View Post
You need to be on a stock sense rom. Just make sure you don't flash an RUU with 1.54.
Click to expand...
Click to collapse
That's correct. With Stock 4.3 revone -P will bring Error code = 1
just flashed back too this http://forum.xda-developers.com/show....php?t=2183023 and now revone works fine.
http://forum.xda-developers.com/showthread.php?p=45094440#post45094440
sr20vet said:
Nothing I've tried is working for me. In my searching though I did find that T-Mobile phones are suspected to have had an update that patches the exploit. It doesn't bump the hboot number, but seems to prevent the current version of revone from working. Apparently it was an OTA update but new phones seem to be shipping with it.
For now I'll keep trying periodically, and hope someone discovers a workaround.
Click to expand...
Click to collapse
If you're on T-Mobile, you could try the following downgrade: http://forum.xda-developers.com/showpost.php?p=45053094&postcount=5219
Seems to have worked for quite a few.
nkk71 said:
If you're on T-Mobile, you could try the following downgrade: http://forum.xda-developers.com/showpost.php?p=45053094&postcount=5219
Seems to have worked for quite a few.
Click to expand...
Click to collapse
Worked for me too, just successfully got s-off with revone. Thanks a lot! Counter to the instructions I did have to run the downgrader from fastboot not the home screen.
sr20vet said:
Worked for me too, just successfully got s-off with revone. Thanks a lot! Counter to the instructions I did have to run the downgrader from fastboot not the home screen.
Click to expand...
Click to collapse
:thumbup:
Sent from my HTC One using xda app-developers app
I had the exact same error, I think it's to do with trying revone on 4.3. I'm in the process of downloading the downgrader and will report back to see if I can get revone to run!
EDIT: The way I solved it was to avoid a 4.3 rom, so I went back and reflashed Android Revolution 13.3 and then tried the steps and it worked absolutely fine, then reflashed the latest Android Revolution 20 4.3 rom and everything was fine, hope that helps anyone else!
Follow the steps in this link http://www.youtube.com/watch?v=J4BWxtjaamM
mattjcl said:
hi, I am trying to s-off my htc one according to these instructions http://forum.xda-developers.com/showthread.php?t=2365506
When it comes to entering the command "./revone -P" I receive error code 1 (note: not -1).
Rebooting and going through the steps does not help. I've searched everywhere and cannot find a resolution in regards to this error code. Any help would be super appreciated. Thanks
Click to expand...
Click to collapse
I am having the same problem... Please help me out someont. Thanks in advance...
dipal_roy said:
I am having the same problem... Please help me out someont. Thanks in advance...
Click to expand...
Click to collapse
wha tis the output of "fastboot getvar all" ?
alray said:
wha tis the output of "fastboot getvar all" ?
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.24.21331147A1.09G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT452WM03802
imei: xxxxxxxxxxxxxxx
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B65000
cidnum: HTC__038
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 3aa067db
hbootpreupdate: 11
gencheckpt: 0
I just need to s-off my device............. Thats all. Thanks in advance
dipal_roy said:
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.24.21331147A1.09G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT452WM03802
imei: xxxxxxxxxxxxxxx
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B65000
cidnum: HTC__038
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 3aa067db
hbootpreupdate: 11
gencheckpt: 0
I just need to s-off my device............. Thats all. Thanks in advance
Click to expand...
Click to collapse
Revone is for htc one M7 hboot 1.44
Your phone isn't a M7..
sunshine is what you need
and M8 forum here

[Q] M7_ul no imei

Hello,
I have a M7_UL that a friend flashed onedroid and ended up with no imei.
the device is s-offed and super cid.
Now every rom I try to flash the devices just reboots after a min or so.(custom,stock,nand backups, guru restet zip and google roms)
When I try
Code:
fastboot getvar all
I can see the imei .
what can I do ?
deadwolf666 said:
Hello,
I have a M7_UL that a friend flashed onedroid and ended up with no imei.
the device is s-offed and super cid.
Now every rom I try to flash the devices just reboots after a min or so.(custom,stock,nand backups, guru restet zip and google roms)
When I try
Code:
fastboot getvar all
I can see the imei .
what can I do ?
Click to expand...
Click to collapse
Not a good sign
have you tried a different radio? http://forum.xda-developers.com/showthread.php?t=2419699
nkk71 said:
Not a good sign
have you tried a different radio? http://forum.xda-developers.com/showthread.php?t=2419699
Click to expand...
Click to collapse
Not working :\
cant find any firmware that will stay stable all I try restarts after 1 min (data partitipon is OK)
deadwolf666 said:
Not working :\
cant find any firmware that will stay stable all I try restarts after 1 min (data partitipon is OK)
Click to expand...
Click to collapse
do you have the original RUU that come with the phone ?
clsA said:
do you have the original RUU that come with the phone ?
Click to expand...
Click to collapse
I dont know what is the original RUU and I cant find out :\
deadwolf666 said:
I dont know what is the original RUU and I cant find out :\
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000 this is your hboot
(bootloader) version-baseband: 4A.19.3263.13 this is your radio
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.10.502.2 this is your firmware version
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000 this is your MID
(bootloader) cidnum: CWS__001 this is your CID
(bootloader) battery-status: good
(bootloader) battery-voltage: 4260mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
Click to expand...
Click to collapse
from the above information you can get you phones RUU
here>> http://www.htc1guru.com/downloads or here >> http://forum.xda-developers.com/showthread.php?t=2428276
Brightstar = developer edition = firmware x.xx.1540.x
cingular = AT&T = x.xx.502.x
Asia - europe and others are self explanatory
clsA said:
from the above information you can get you phones RUU
here>> http://www.htc1guru.com/downloads or here >> http://forum.xda-developers.com/showthread.php?t=2428276
Brightstar = developer edition = firmware x.xx.1540.x
cingular = AT&T = x.xx.502.x
Asia - europe and others are self explanatory
Click to expand...
Click to collapse
as I said the device is s-offed and I tried few RUUs so there is no why to know what was the original version. typing getvar all will only show me the last version I tried to flash
deadwolf666 said:
as I said the device is s-offed and I tried few RUUs so there is no why to know what was the original version. typing getvar all will only show me the last version I tried to flash
Click to expand...
Click to collapse
so you don't know what you phone was originally ?
clsA said:
so you don't know what you phone was originally ?
Click to expand...
Click to collapse
unfortunately not
deadwolf666 said:
unfortunately not
Click to expand...
Click to collapse
what sim card is in the phone
clsA said:
what sim card is in the phone
Click to expand...
Click to collapse
None,
My friend bought it in the local store, in my country this phone is brought from all over the world so no way to know by the simcard
Why don't you bring it back to the store
dicecuber said:
Why don't you bring it back to the store
Click to expand...
Click to collapse
They give no warranty after changing software (or unlocking bootloader)
Any way I prefer to solve it my self also for the knowledge
deadwolf666 said:
They give no warranty after changing software (or unlocking bootloader)
Any way I prefer to solve it my self also for the knowledge
Click to expand...
Click to collapse
well with no iemi and no information on the origins of the phone I guess you have an expensive mp3 player.
clsA said:
well with no iemi and no information on the origins of the phone I guess you have an expensive mp3 player.
Click to expand...
Click to collapse
when checking getvar all I can see the imei so its there, what could make the software not read it ?
deadwolf666 said:
when checking getvar all I can see the imei so its there, what could make the software not read it ?
Click to expand...
Click to collapse
no sim card is my guess
Flash the ROM with a different recovery. What recovery are you currently having? would suggest TWRP
pradeepvizz said:
Flash the ROM with a different recovery. What recovery are you currently having? would suggest TWRP
Click to expand...
Click to collapse
Tryed CWM and TWRP 3 last version each

[Q] No service, but data working

Hi
Since I flashed wiped the entire phone, by mistake.. and flashed another ROM (4.4) my GSM won't work again.. only data (3G) would work.
I already try flashing this RUU http://forum.xda-developers.com/showthread.php?t=2358781
But it's the same.. I've also tried to update my firmware.. to 4A.17.3250.14
Hope somebody can give me a hand.
Thanks!!
Stranyer said:
Hi
Since I flashed wiped the entire phone, by mistake.. and flashed another ROM (4.4) my GSM won't work again.. only data (3G) would work.
I already try flashing this RUU http://forum.xda-developers.com/showthread.php?t=2358781
But it's the same.. I've also tried to update my firmware.. to 4A.17.3250.14
Hope somebody can give me a hand.
Thanks!!
Click to expand...
Click to collapse
Which version of one do you have?
And post here a getvar all from fastboot hiding imei and serial number of your phone
Stranyer said:
Hi
Since I flashed wiped the entire phone, by mistake.. and flashed another ROM (4.4) my GSM won't work again.. only data (3G) would work.
I already try flashing this RUU http://forum.xda-developers.com/showthread.php?t=2358781
But it's the same.. I've also tried to update my firmware.. to 4A.17.3250.14
Hope somebody can give me a hand.
Thanks!!
Click to expand...
Click to collapse
Are you able to provide more info?
Which ROM were you on before and now (4.4)? Stock? Custom?
If it is possible, please provide info from using this command: fastboot getvar all
Remember to remove or mask out the serial & IMEI part of info.
BCocoPop said:
Are you able to provide more info?
Which ROM were you on before and now (4.4)? Stock? Custom?
If it is possible, please provide info from using this command: fastboot getvar all
Remember to remove or mask out the serial & IMEI part of info.
Click to expand...
Click to collapse
Sure, sorry.
I was using SkyDragon.. and it was working fine until I tried to use this one http://forum.xda-developers.com/showthread.php?t=2183023
Since I installed that ROM, I can't get GSM connection.
I can't use adb... it keeps saying "ERROR: device not found"
Please, anybody?
Thanks in advance!!!
Blacklisted/? What carrier are you with? Any other sim card work?
SaHiLzZ said:
Blacklisted/? What carrier are you with? Any other sim card work?
Click to expand...
Click to collapse
Hi! thanks for answer
I don't think so, and I'm using Movistar (Argentina). My SIM works just fine in another phone..
Stranyer said:
Hi! thanks for answer
I don't think so, and I'm using Movistar (Argentina). My SIM works just fine in another phone..
Click to expand...
Click to collapse
Does any other sim card work in this phone?
SaHiLzZ said:
Does any other sim card work in this phone?
Click to expand...
Click to collapse
No, I've tried other sim's but nothing
Pay your phone bill
Sent from my HTC One using Tapatalk
xcrazydx said:
Pay your phone bill
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
What are you talking about? What part of Ive tried other SIM cards and they wont work either. My SIm work just fine in another phobe.
Gotta pay your bills bro!
Sent from my HTC One using Tapatalk
xcrazydx said:
Gotta pay your bills bro!
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Are you dumb or what? that is not the issue! my sim work just fine in another phone... *sigh*
Please! I need my phone... anyone can give me a hand?
Thanks!!!
este es el getvar
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.20.3263.30
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.57.401.500
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: HT3xxxxxxx
INFOimei: 354xxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4108mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6cad6811
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Stranyer said:
este es el getvar
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.20.3263.30
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.57.401.500
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: HT3xxxxxxx
INFOimei: 354xxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4108mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6cad6811
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Click to expand...
Click to collapse
use this guide and return to stock
http://forum.xda-developers.com/showthread.php?t=2541082
your already s-off it should be easy
clsA said:
use this guide and return to stock
http://forum.xda-developers.com/showthread.php?t=2541082
your already s-off it should be easy
Click to expand...
Click to collapse
Thanks for answer!
I tried that, but it didn't work.. now I don't have signal at all... it's says "No Service"... I tried with 4 sim cards.
Going to say it again, I am leaning towards your device imei blacklisted
SaHiLzZ said:
Going to say it again, I am leaning towards your device imei blacklisted
Click to expand...
Click to collapse
But 3G was just working until I installed the stock rom. I was able to use facebook, whastapp, skype, etc.. but not SMS or Phone calls
Stranyer said:
But 3G was just working until I installed the stock rom. I was able to use facebook, whastapp, skype, etc.. but not SMS or Phone calls
Click to expand...
Click to collapse
Well I managed to get working 3G (data) again.. but still says "No Service" and it won't make calls or send sms.
Thanks!

[Q] Not getting any signal

Hi, I have been reading this forum for 2 days straight trying everything and most of the things helped but now I am stuck.
My problem: I am trying to use the phone on Bell network. No signal, GSM status : Emergency Call Only. When I select Bell from network list it tells me that the SIM does not support the Network. If I put the same SIM in another phone it works and gets network.
My phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.06.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Preffered Network Type : CDMA/EvDo/GSM/WCDMA/LTE auto
CWM: M7 TWRP Nandroid Backup CID BM___001 1.29.666.5
What I did:
1) Tried the tape method in case SIM card was not making proper contact with phone pins. (Than I realized that was nonesense since the phone was detecting my contacts...)
2) Flashed new firmware (6.06.401.1 came with radios nothing changed)
3) Installed the Bell Mobility Nandroid Backup (still nothing except I can now install the Bell applications from my SIM card)
I am looking for suggestions, ideas and possibly solutions. Any help is welcome!
Finxster
finxster said:
Hi, I have been reading this forum for 2 days straight trying everything and most of the things helped but now I am stuck.
My problem: I am trying to use the phone on Bell network. No signal, GSM status : Emergency Call Only. When I select Bell from network list it tells me that the SIM does not support the Network. If I put the same SIM in another phone it works and gets network.
My phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.06.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Preffered Network Type : CDMA/EvDo/GSM/WCDMA/LTE auto
CWM: M7 TWRP Nandroid Backup CID BM___001 1.29.666.5
What I did:
1) Tried the tape method in case SIM card was not making proper contact with phone pins. (Than I realized that was nonesense since the phone was detecting my contacts...)
2) Flashed new firmware (6.06.401.1 came with radios nothing changed)
3) Installed the Bell Mobility Nandroid Backup (still nothing except I can now install the Bell applications from my SIM card)
I am looking for suggestions, ideas and possibly solutions. Any help is welcome!
Finxster
Click to expand...
Click to collapse
have you tried another sim in the HTC connected to a GSM network, I have a suspicious feeling you have a GSM phone there and Bell requires a CDMA phone, completely different partition layout.
Seanie280672 said:
have you tried another sim in the HTC connected to a GSM network, I have a suspicious feeling you have a GSM phone there and Bell requires a CDMA phone, completely different partition layout.
Click to expand...
Click to collapse
I tried Rogers SIM and it worked one shot.
finxster said:
I tried Rogers SIM and it worked one shot.
Click to expand...
Click to collapse
also, another thing ive noticed, is the firmware you flashed is a 401 firmware, thats WWE Europe, not 100% sure if that maybe at fault
I believe someone recently had success flashing developer edition firmware and RUU on their device and they were on Bell.
I'll see if I can find the thread, EDIT: http://forum.xda-developers.com/htc-one/help/dpes-developers-edition-canada-t2851008
Its got to worth a try, and easy to do as your s-off.
Seanie280672 said:
also, another thing ive noticed, is the firmware you flashed is a 401 firmware, thats WWE Europe, not 100% sure if that maybe at fault
I believe someone recently had success flashing developer edition firmware and RUU on their device and they were on Bell.
I'll see if I can find the thread, EDIT: http://forum.xda-developers.com/htc-one/help/dpes-developers-edition-canada-t2851008
Its got to worth a try, and easy to do as your s-off.
Click to expand...
Click to collapse
Oh dayum that was fast. I am going to try it now and get back to you with results.
Crossing fingers, toes and everything else....
dam harf to ttpe lije ths...
uncrossing fingers....
BRB
EDIT: Changed CID, MID is the same... downloading firmware
EDIT2: Flashed firmware downloading RUU
sidequestion: the RUU name is RUU M7 UL K44 SENSE55 MR BrightstarUS WWE 4.19.1540.9 Radio 4A.23.3263.28 10.38r.1157.04L Release 353887 Signed 3... wouldn't that also be Europe specific @Seanie280672?
Also, I see my HBOOT is now 1.56...
finxster said:
Oh dayum that was fast. I am going to try it now and get back to you with results.
Crossing fingers, toes and everything else....
dam harf to ttpe lije ths...
uncrossing fingers....
BRB
EDIT: Changed CID, MID is the same... downloading firmware
EDIT2: Flashed firmware downloading RUU
Click to expand...
Click to collapse
be sure to check the MD5 and file size of the RUU before flashing, and if the download is a little slow, you can try this link instead, same RUU:
http://androidruu.com/getdownload.p...8_10.38r.1157.04L_release_353887_signed_3.exe
no, WWE means world wide English.
Seanie280672 said:
be sure to check the MD5 and file size of the RUU before flashing
Click to expand...
Click to collapse
File size is 1.5 gb.... How do I check MD5?
finxster said:
File size is 1.5 gb.... How do I check MD5?
Click to expand...
Click to collapse
MD5 Check http://forum.xda-developers.com/showthread.php?t=1135620
i'll keep my fingers crossed for you :fingers-crossed:
Seanie280672 said:
i'll keep my fingers crossed for you :fingers-crossed:
Click to expand...
Click to collapse
They match!
noob question here... What is the command for fastboot to run an exe?
Nvm... >.> figured it out...
finxster said:
They match!
noob question here... What is the command for fastboot to run an exe?
Click to expand...
Click to collapse
there isn't one.
plug your phone into the computer and make sure it says fastboot USB on the screen, then double click the RUU.exe file and it will launch, follow the on screen instructions, flashing takes quite a while, about 10 mins I think mine took, and at points it will look like its stuck, not very reassuring I know, it got stuck at 5% for me and then suddenly jumped to 95%, then seemed to sit there forever until it finally completed.
EDIT: is your Bell sim still in the phone ?
@Seanie280672 Yep bell sim still in phone. Installing now
finxster said:
@Seanie280672 Yep bell sim still in phone. Installing now
Click to expand...
Click to collapse
good, because during set-up it should detect your sim and ask you to select your operator, im hoping Bell is in the list.
Seanie280672 said:
good, because during set-up it should detect your sim and ask you to select your operator, im hoping Bell is in the list.
Click to expand...
Click to collapse
It prepared installation and when I agreed and clicked next... it closed... I was running it as admin....
finxster said:
It prepared installation and when I agreed and clicked next... it closed... I was running it as admin....
Click to expand...
Click to collapse
damn, I had that problem once, its not the RUU at fault, its your computer, this is how I fixed it, its a bit long winded and you have to restart your computer after each installation, you need to install all of them one at a time, or you can try another computer if you have one available.
http://forums.androidcentral.com/ht...tall-4-3-ruu-windows-7-8-1-a.html#post3466555
I want to take a minute and thank you @Seanie280672!!! I am going to go ahead and try it... I do however have another pc next to me so I will try running the RUU from that one in the meanwhile.
finxster said:
I want to take a minute and thank you @Seanie280672!!! I am going to go ahead and try it... I do however have another pc next to me so I will try running the RUU from that one in the meanwhile.
Click to expand...
Click to collapse
your welcome, but don't thank me yet, its not worked yet, im just sharing my knowledge which ive learned from others on this great forum.
Seanie280672 said:
damn, I had that problem once, its not the RUU at fault, its your computer, this is how I fixed it, its a bit long winded and you have to restart your computer after each installation, you need to install all of them one at a time, or you can try another computer if you have one available.
http://forums.androidcentral.com/ht...tall-4-3-ruu-windows-7-8-1-a.html#post3466555
Click to expand...
Click to collapse
So, I got it to run on my main PC but there is a dialog box that makes me skip all the steps... will try on the laptop
Same on my laptop... ARUWizard Click here to next dialog... and I can't do anything else... clicking ok until the program is killed
finxster said:
So, I got it to run on my main PC but there is a dialog box that makes me skip all the steps... will try on the laptop
Same on my laptop... ARUWizard Click here to next dialog... and I can't do anything else... clicking ok until the program is killed
Click to expand...
Click to collapse
ive never seen that error before, but this would maybe explain it: http://www.solvusoft.com/en/files/e...windows/htc/rom-update-utility/aruwizard-exe/
http://forum.xda-developers.com/showthread.php?t=2666090
He has the same issue, however I am in bootloader fastboot usb mode... and still nothing... should I try RUU mode?
@Seanie280672
finxster said:
http://forum.xda-developers.com/showthread.php?t=2666090
He has the same issue, however I am in bootloader fastboot usb mode... and still nothing... should I try RUU mode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=50739768&postcount=4

RUU is not working for my M7.

I have an AT&T M7 flashed with Cyanogenmod 10 that I would like to restock. I've tried the RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2, but that is not working.
I mean it starts to run and then after asking for aproval it desapears.
I also tried the RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2, and this one runs but at the end it says that is not compatible with my phones firmware.
This is the phone info:
M7_UL PVT SHIP S-OFF RH
CID-CWS_001HBOOT-1. 56. 0000
RADIO-4T. 24. 3218. 09
OpenDSP-v32. 120. 274. 0909
OS-4. 18. 502. 7
eMMC-boot 2048MB
Jan 28 2014, 09: 32: 41. 0
What is the simpliest way to go back to stock?
Thanks in advance.
Getvar:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4284mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
chiquito3 said:
I have an AT&T M7 flashed with Cyanogenmod 10 that I would like to restock. I've tried the RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2, but that is not working.
I mean it starts to run and then after asking for aproval it desapears.
I also tried the RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2, and this one runs but at the end it says that is not compatible with my phones firmware.
This is the phone info:
M7_UL PVT SHIP S-OFF RH
CID-CWS_001HBOOT-1. 56. 0000
RADIO-4T. 24. 3218. 09
OpenDSP-v32. 120. 274. 0909
OS-4. 18. 502. 7
eMMC-boot 2048MB
Jan 28 2014, 09: 32: 41. 0
What is the simpliest way to go back to stock?
Thanks in advance.
Getvar:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4284mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
Click to expand...
Click to collapse
you need to downgrade your hboot to 1.44 to flash 1.26.502.12
alray said:
you need to downgrade your hboot to 1.44 to flash 1.26.502.12
Click to expand...
Click to collapse
Thanks a lot for your response! Actually my real intention is not to go back to 1.26.502.12, but to go back to the latest stock available. Is just that the 4.18.502.7 RUU did not work for me.
If downgrading will solvwe my problem where do I get a copy of the 1.44 hboot for AT&T. I do not find one with the 502 identification.
chiquito3 said:
Thanks a lot for your response! Actually my real intention is not to go back to 1.26.502.12, but to go back to the latest stock available. Is just that the 4.18.502.7 RUU did not work for me.
If downgrading will solvwe my problem where do I get a copy of the 1.44 hboot for AT&T. I do not find one with the 502 identification.
Click to expand...
Click to collapse
use the 1.44 hboot from the .401 version.
chiquito3 said:
Thanks a lot for your response! Actually my real intention is not to go back to 1.26.502.12, but to go back to the latest stock available. Is just that the 4.18.502.7 RUU did not work for me.
If downgrading will solvwe my problem where do I get a copy of the 1.44 hboot for AT&T. I do not find one with the 502 identification.
Click to expand...
Click to collapse
Did you check the md5 of the 4.15.502.7 ruu you downloaded?
Also if you have HTCsync installed then uninstall it. Doesn't do any favours when using ruu's :good:
I've downloaded the file from 2 different sources and the resilt is the same.
Sent from my SM-G900T using Tapatalk
chiquito3 said:
I've downloaded the file from 2 different sources and the resilt is the same.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Is the RUU quiting after you accept the license agreement , if so, its a windows error not an RUU error, read and do the fix below:
http://forums.androidcentral.com/htc-evo-4g-lte/363796-can-t-install-4-3-ruu-windows-7-8-1-a.html
post 18 fixed the problem for me, you need to download and install all one at a time with a reboot in-between each one, do not use windows update to update any of them.
Seanie280672 said:
Is the RUU quiting after you accept the license agreement , if so, its a windows error not an RUU error, read and do the fix below:
http://forums.androidcentral.com/htc-evo-4g-lte/363796-can-t-install-4-3-ruu-windows-7-8-1-a.html
post 18 fixed the problem for me, you need to download and install all one at a time with a reboot in-between each one, do not use windows update to update any of them.
Click to expand...
Click to collapse
Seems that you are right. I tried all the suggestions here but none of them worked on my PC. So Idecided to try on my laptop. The thing is that the RUU did run well but unfotunately it ends with an error 170 usb connection error.
The laptop recognizes the phone well so I cant understand the reason for the error.
chiquito3 said:
Seems that you are right. I tried all the suggestions here but none of them worked on my PC. So Idecided to try on my laptop. The thing is that the RUU did run well but unfotunately it ends with an error 170 usb connection error.
The laptop recognizes the phone well so I cant understand the reason for the error.
Click to expand...
Click to collapse
make sure the computer recognises the phone whilst the phone is both booted and in the bootloader with fastbootUSB showing on the phone screen.
Seanie280672 said:
make sure the computer recognises the phone whilst the phone is both booted and in the bootloader with fastbootUSB showing on the phone screen.
Click to expand...
Click to collapse
Ok guys I did it thanks to your help.
Now what is the prefered rooting method and should I take the OTA or not?
chiquito3 said:
Ok guys I did it thanks to your help.
Now what is the prefered rooting method and should I take the OTA or not?
Click to expand...
Click to collapse
yes take the OTA's, if you dont like the new Lollipop you can always just flash the RUU again to get back to the older versions as your s-off.
after you've done the OTA's, to root, just flash twrp recovery: http://dl.twrp.me/m7/twrp-2.8.5.0-m7.img and then flash the superSU zip from within TWRP recovery: http://download.chainfire.eu/696/SuperSU, complete root setup once the phone has started back up by opening superSU from your app drawer.
Seanie280672 said:
yes take the OTA's, if you dont like the new Lollipop you can always just flash the RUU again to get back to the older versions as your s-off.
after you've done the OTA's, to root, just flash twrp recovery: http://dl.twrp.me/m7/twrp-2.8.5.0-m7.img and then flash the superSU zip from within TWRP recovery: http://download.chainfire.eu/696/SuperSU, complete root setup once the phone has started back up by opening superSU from your app drawer.
Click to expand...
Click to collapse
I updated it but it only updated to 4.4.2. There was no Lollipop update. I think that there is no officail AT&T Lollipop update.
chiquito3 said:
I updated it but it only updated to 4.4.2. There was no Lollipop update. I think that there is no officail AT&T Lollipop update.
Click to expand...
Click to collapse
There is no lollipop for at&t yet, should be released soon
http://www.htc.com/us/go/htc-software-updates/#device-content
chiquito3 said:
I updated it but it only updated to 4.4.2. There was no Lollipop update. I think that there is no officail AT&T Lollipop update.
Click to expand...
Click to collapse
alray said:
There is no lollipop for at&t yet, should be released soon
http://www.htc.com/us/go/htc-software-updates/#device-content
Click to expand...
Click to collapse
Yes during the Uh Oh announcement / interview they said they were shooting for an April 1'st update for AT&T M7
clsA said:
Yes during the Uh Oh announcement / interview they said they were shooting for an April 1'st update for AT&T M7
Click to expand...
Click to collapse
And I'm longing for that moment! Thanks again.
Since I did change the stock recovery to TWRP just for rooting the phone, could I still take the OTA upgrade or does it have to be done manually?
I also installed Xposed Framework and some HTC Modules.
chiquito3 said:
And I'm longing for that moment! Thanks again.
Since I did change the stock recovery to TWRP just for rooting the phone, could I still take the OTA upgrade or does it have to be done manually?
I also installed Xposed Framework and some HTC Modules.
Click to expand...
Click to collapse
you will have to return the phone to full stock to take an OTA update
clsA said:
you will have to return the phone to full stock to take an OTA update
Click to expand...
Click to collapse
I did something bad to the phone and would like to go back to stock can I use the RUU again and how? Because I tried and it gives a fastboot error a few seconds after starting. The RUU is actually a downgrade.
I was trying to mod the Weather widget to transparent and I ended without the widget and the phone goes to black and takes too long to come back to light the screen.
the error is htc.fastboot.exe has stopped working
chiquito3 said:
I did something bad to the phone and would like to go back to stock can I use the RUU again and how? Because I tried and it gives a fastboot error a few seconds after starting. The RUU is actually a downgrade.
I was trying to mod the Weather widget to transparent and I ended without the widget and the phone goes to black and takes too long to come back to light the screen.
the error is htc.fastboot.exe has stopped working
Click to expand...
Click to collapse
you can use my Guru_Reset to return to stock 5.x
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
If you want to keep custom recovery choose no to stock recovery during install and yes to Root
clsA said:
you can use my Guru_Reset to return to stock 5.x
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
If you want to keep custom recovery choose no to stock recovery during install and yes to Root
Click to expand...
Click to collapse
Thanks again for your reply!
How do I flash this one? can it be done through costum recovery?
chiquito3 said:
Thanks again for your reply!
How do I flash this one? can it be done through costum recovery?
Click to expand...
Click to collapse
Yes you flash it in TWRP same as a rom

Categories

Resources