I had a N9208 , dual sim that I rooted.
After that , the phone ended in boot looping.
When I tried to flash a rom through ODIN, it wasn't responding as it was getting stuck at NAND WRITE.
I took it to someone who repairs phones.
After a lot of tries, he somehow managed to make it boot.
(He used the blue box to fix it)
Now the radio of the phone supports Dual Function but it has the Rom of 920c .
The problem is :
1)Upgrade does not work and it says that the phone has been tampered
2)I am receiving a mesg that says Unathorised actions have been made to your phone all the time
3)I cannot set up TWRP or Philz installed as ODIN again ghets stuck in NAND WRITE
4)Battery is Super draining.
What I want is ideally put the old rom back and set up TWRP in order to flash a new rom.
But again ODIN does not cooperates.
Any ideas of what happened or any help?
Related
hello all
yesterday i wanted to flash a friend tp2
when i flashed it it went to 100% and then it gave a rom code error
i restarted the phone in bootloader to flash a other rom and it wanted to read the image on the sdcard
wich resulted in red serie of digits on top of the screen 00058002
and the phone turned off
i deleted the image from the sdcard and tried it again
i came in bootloader and i saw threu the spl text rom upgrade error
now everytime i enter bootloader it turns off the phone in 5 sec
i managed to run a task 29 one time by resetting the phone multiple times
can some one help me
owww its not fixed
i managed to get stock rom on it again but during the custimizsation the phone turned off:S
and now i have the same problem again
edit: i dont know how but its fixed
Hello,
I have weird problem with my Samsung captivate.
I install a new rom on my device and it work well for several hours buy than it suddenly stop to work.
After a reset my device get stuck on the at&t screen.
I entered the download mode and flashed clean rom with odin (and check the Master Clear option).
But it still get stuck on the at&t screen.
Is this can be hardware problem?
Is there any way to get the log file from the boot to find out what is the problem?
when i reflash my phone via odin to stock rom 4.1.2
all as happen as normal in odin but when my phone reboot i don't get first setup
just boot to lockscreen like it's just reboot not reflash !
(i do that because i'm lost my signal stay no service i'm trying my sim in another phone work normally)
someone can help me ! thank's
I would suggest to do a factory reset then flash your stock ROM. If your phone boots then no startup screen but straight to lock screen, either the flash didn't work properly or leftovers of the old ROM are still there (data).
Sent from my GT-I8190N running SlimKat
Hello everyone.
I had a N9208 , dual sim that I rooted.
After that , the phone ended in boot looping.
When I tried to flash a rom through ODIN, it wasn't responding as it was getting stuck at NAND WRITE.
I took it to someone who repairs phones.
After a lot of tries, he somehow managed to make it boot.
(He used the blue box to fix it)
Now the radio of the phone supports Dual Function but it has the Rom of 920c .
The problem is :
1)Upgrade does not work and it says that the phone has been tampered
2)I am receiving a mesg that says Unathorised actions have been made to your phone all the time
3)I cannot set up TWRP or Philz installed as ODIN again ghets stuck in NAND WRITE
4)Battery is Super draining.
What I want is ideally put the old rom back and set up TWRP in order to flash a new rom.
But again ODIN does not cooperates.
Any ideas of what happened or any help?
Thanks
I have this phone, the thing that happened here is short, i proceed to explain.
I flashed a custom recovery, but for mistake i put the twrp from another device completly different, it was the one from another phone that i have (j2 prime), and when i noticed about it, it was so late, the phone restarted, and say the clasic red text "kernel is not seandroid enforcing" , but.....i wait for more than 5 minutes and the screen stay in the logo of samsung s6 edge plus....and nothing happened, i tryed to enter in recovery mode but it wont work, only works the download mode (lucky it wanst a hard brick), so i try flashing from the original firmware for the SM-G925I (version marshmellow, i think is 6.0.1) extracting the original recovery, then flash it, and the same happened, it wont start, i know if i flash the whole firmware again it will start, but im trying to save the data, cuz i have lots of pictures there....is anyway to fix this or extract the data (ofc the pc doesnt recognice the storage)...? Thanks.
p.d: if i was wrong posting here in the supersu forum , i apologize