Vehicle.apk - MTCB Android Head Units General

Hey guys.
I just discovered that inside the JY Android there is an app called simply "Vehicle". Appears to take out car info via can bus and display it, but only when you start the app. Plus the "settings" tab inside it appears to be inactive. Anyone know where does this app come from? Can't find it on Google Play and it doesn't appear to have any widgets to go with it, though it would be very useful to have some of those informations permanently displayed.

Really.. I haven't seen that..
So you are saying it is actually taped in to the ECU onboard computer and is grabbing information from it directly with out any need of the Bluetooth adapter that others are using?..
If that is the case that opens up a whole range of possibilities..
Not the least the one that is.. If this is running that and you are on the internet, in theory the car unit can be hacked and a third party can take control of it..
Especially in newer cars..
Hum... Interestingly...
I am thinking a little more into this as I run a chipped diesel engine..
We drop a chip into it to boast performance and it is getting plugged into the engine via one of the auto testing ports..
So in theory, if this unit is directly tapped into the ECU we might be able to control this chip via an app... Food for thought..
Sent from my TF300T using Tapatalk

dgcruzing said:
Really.. I haven't seen that..
So you are saying it is actually taped in to the ECU onboard computer and is grabbing information from it directly with out any need of the Bluetooth adapter that others are using?..
If that is the case that opens up a whole range of possibilities..
Not the least the one that is.. If this is running that and you are on the internet, in theory the car unit can be hacked and a third party can take control of it..
Especially in newer cars..
Hum... Interestingly...
I am thinking a little more into this as I run a chipped diesel engine..
We drop a chip into it to boast performance and it is getting plugged into the engine via one of the auto testing ports..
So in theory, if this unit is directly tapped into the ECU we might be able to control this chip via an app... Food for thought..
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
Yeap, it does grab them, as you say, but as far as I saw, it has nothing but one-way read-only possibilities. And the info appears to be the one that you can normaly access on your mfd, nothing more, except that it's all there in one single column. But for instance, the fuel quantity is displayed in real terms, in liters, the battery voltage is there aswell... and so on. I don't know how accurate the information is, but it would sure be useful to be able to have a widget on the unit's screen, based on that app, to display some or all of that info permanently. However, the fact that the unit grabs info from the car's computer without any OBD, Bluetooth or otherwise, is obvious... how else would it be able to show info like parking sensors, park trajectory, climatronic, an so on if it weren't able to do that. But my guess is that all that info is available though the can bus only, and you can only read it, not tamper with it.

Sasha0574 said:
Yeap, it does grab them, as you say, but as far as I saw, it has nothing but one-way read-only possibilities. And the info appears to be the one that you can normaly access on your mfd, nothing more, except that it's all there in one single column. But for instance, the fuel quantity is displayed in real terms, in liters, the battery voltage is there aswell... and so on. I don't know how accurate the information is, but it would sure be useful to be able to have a widget on the unit's screen, based on that app, to display some or all of that info permanently. However, the fact that the unit grabs info from the car's computer without any OBD, Bluetooth or otherwise, is obvious... how else would it be able to show info like parking sensors, park trajectory, climatronic, an so on if it weren't able to do that. But my guess is that all that info is available though the can bus only, and you can only read it, not tamper with it.
Click to expand...
Click to collapse
In fact, all these data are from the canbus decoder. I have a VW and also this application

Nova8316 said:
In fact, all these data are from the canbus decoder. I have a VW and also this application
Click to expand...
Click to collapse
Exactly... what I am looking for is the source of this app and a way to turn it into a widget, so I can have that info on the screen.

Sasha0574 said:
Exactly... what I am looking for is the source of this app and a way to turn it into a widget, so I can have that info on the screen.
Click to expand...
Click to collapse
Simpliest way will be to dissassemble MTCVehicle.apk and look at the code.

Nova8316 said:
Simpliest way will be to dissassemble MTCVehicle.apk and look at the code.
Click to expand...
Click to collapse
Umm... yeah.. if I knew how to do that... unfortunately I'm PR not IT

Sasha0574 said:
Exactly... what I am looking for is the source of this app and a way to turn it into a widget, so I can have that info on the screen.
Click to expand...
Click to collapse
I also have this installed on my head unit, but it does not seem to work with the CANBUS in my VW...

Hein3G said:
I also have this installed on my head unit, but it does not seem to work with the CANBUS in my VW...
Click to expand...
Click to collapse
Could you be more specific about the VW? As in year and type?

Sasha0574 said:
Could you be more specific about the VW? As in year and type?
Click to expand...
Click to collapse
Sure, I have a 2011 Jetta V 1.4TSI Comfortline DSG. CANBUS decoder model is VW-RZ-07 for a Erisin ES9401A KGL Head Unit.

Hein3G said:
Sure, I have a 2011 Jetta V 1.4TSI Comfortline DSG. CANBUS decoder model is VW-RZ-07 for a Erisin ES9401A KGL Head Unit.
Click to expand...
Click to collapse
The car is good. Must be the canbus decoder. Either that or it has an old software. Just to make sure... you push "Vehicle" app, then you get a black screen with nothing but Vehicle writing there, you push that... and nothing happens?

Sasha0574 said:
The car is good. Must be the canbus decoder. Either that or it has an old software. Just to make sure... you push "Vehicle" app, then you get a black screen with nothing but Vehicle writing there, you push that... and nothing happens?
Click to expand...
Click to collapse
I can open the app and select "Vehicle", it then shows a list of items like fuel level, distance from start but values are blank and not read from the CANBUS.
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
Hein3G said:
I can open the app and select "Vehicle", it then shows a list of items like fuel level, distance from start but values are blank and not read from the CANBUS.
Click to expand...
Click to collapse
I have tried to find out if a different decoder model might work but no luck.
Some info on a other method i'm considering: http://forum.xda-developers.com/android-auto/mtcb-android-head-units-qa/swc-command-repeat-issue-vw-bus-t3247109

Hein3G said:
I can open the app and select "Vehicle", it then shows a list of items like fuel level, distance from start but values are blank and not read from the CANBUS.
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
I have tried to find out if a different decoder model might work but no luck.
Click to expand...
Click to collapse
It must be the decoder, however, if it's hardware or software issue I dunno. My first unit was as blind as a bat to the canbus, but my new unit came with a newer version of canbus decoder and software (from 1.01 to 1.07) and this one sees everything but the climatronic (odd enough). And you might want to track down the manufacturer for that...

Here's some winter news... the damn app doesn't recognise negative temperatures... outside was -7 (Celsius) and it was showing +6594:laugh::laugh::laugh: I must have landed on the sun's surface:silly:

I have one of these head units based on an RK3188 chip in my mini, and only today realised it was setup wrongly and the canbus type was set to BMW and not MINI.
WHat this means now is that suddenly it's on the CANBUS and my steering wheel volume etc are working as they should.
However...
I deleted the vehicle app when I was playing around with it, can an of you grab the apk and send me a copy of this?? Now I have the CANBUS working (i initialy thought I'd wired it incorrectly) the app should work and gve me fuel levels and MPG etc as the original head unit did.
Any help appreciated, I can't find this APK anywhere on the unit itself, and there doesn't seem to be anything on the play store like this.
Cheers

graigchq said:
I have one of these head units based on an RK3188 chip in my mini, and only today realised it was setup wrongly and the canbus type was set to BMW and not MINI.
WHat this means now is that suddenly it's on the CANBUS and my steering wheel volume etc are working as they should.
However...
I deleted the vehicle app when I was playing around with it, can an of you grab the apk and send me a copy of this?? Now I have the CANBUS working (i initialy thought I'd wired it incorrectly) the app should work and gve me fuel levels and MPG etc as the original head unit did.
Any help appreciated, I can't find this APK anywhere on the unit itself, and there doesn't seem to be anything on the play store like this.
Cheers
Click to expand...
Click to collapse
That is the problem with it... noone seems to know where did that app come from and who made it...

can't it be backed up to .apk from a working unit?

igorski said:
can't it be backed up to .apk from a working unit?
Click to expand...
Click to collapse
And where would the use be in that if you get the same old version?

Sasha0574 said:
And where would the use be in that if you get the same old version?
Click to expand...
Click to collapse
Well, the use would be in the fact it seems fairly discontinued, but is a useful app.
I downloaded and installed a newer version of the stock firmware, and this app wasn't included. I would like to put it back on, so if anyone can extract it and pass it my way, there's a bit of paypal kudos on the way...

graigchq said:
Well, the use would be in the fact it seems fairly discontinued, but is a useful app.
I downloaded and installed a newer version of the stock firmware, and this app wasn't included. I would like to put it back on, so if anyone can extract it and pass it my way, there's a bit of paypal kudos on the way...
Click to expand...
Click to collapse
Mine also has the latest update and the app is there. I don't think it's discontinued, just some chinese homebrew that doesn't appear on Gplay.

Related

[Q] Bluetooth audio in your car, is song info being displayed?

When connected to my car's bluetooth and using Google Music, artist/title/album info isn't being sent to my car's display, anyone else having the same problem? It works fine on my Nexus5 so I assume the Google Music app isn't the problem. What happens is it will usually correctly display the song info when I first launch the player but then it never updates. Could the Z3c be using an older bluetooth a2dp profile than the Nexus 5, anyone know how to check?
Track info displays and updates correctly in in my car.
I use Spotify and Google Play Music
ikon8 said:
When connected to my car's bluetooth and using Google Music, artist/title/album info isn't being sent to my car's display, anyone else having the same problem? It works fine on my Nexus5 so I assume the Google Music app isn't the problem. What happens is it will usually correctly display the song info when I first launch the player but then it never updates. Could the Z3c be using an older bluetooth a2dp profile than the Nexus 5, anyone know how to check?
Click to expand...
Click to collapse
Works flawlessly here.
Strange, I wonder why it would work flawlessly on my Nexus5 and not at all on z3c.
After some more digging around I found in Sony's Z3 Compact white paper, it lists bluetooth AVRCP profile version 1.3, whereas the Nexus 5 uses version 1.4, I think this might be the problem. I also found threads elsewhere on xda where people with phones running AVCRP 1.3 had the same issues in their car. I also tried using Spotify and the Walkman app and none of them work.
ikon8 said:
After some more digging around I found in Sony's Z3 Compact white paper, it lists bluetooth AVRCP profile version 1.3, whereas the Nexus 5 uses version 1.4, I think this might be the problem. I also found threads elsewhere on xda where people with phones running AVCRP 1.3 had the same issues in their car. I also tried using Spotify and the Walkman app and none of them work.
Click to expand...
Click to collapse
Worked with mine yesterday. So i doubt it is an issue with Revision numbers, try unpairing and Repairing
NRG1975 said:
Worked with mine yesterday. So i doubt it is an issue with Revision numbers, try unpairing and Repairing
Click to expand...
Click to collapse
I've tried everything already. AVCRP is the profile responsible for the car controlling the phone and getting the display info, the Sony is using an old version. Lots of people have reported problems with their car not getting display info on phones running the bluetooth AVCRP 1.3 profile.
ikon8 said:
I've tried everything already. AVCRP is the profile responsible for the car controlling the phone and getting the display info, the Sony is using an old version. Lots of people have reported problems with their car not getting display info on phones running the bluetooth AVCRP 1.3 profile.
Click to expand...
Click to collapse
Lots of people are reporting it as working, I am not sure that a newer version would fix the issue, as it is backward compatible.
It's not working, at all, for me.
I have a Sony XAV-601BT stereo in my car, and this worked fine with Samsung phones, Blackberrys, and iPhones. Even the Xperia ZL worked for AVRCP.
This one isn't. I can skip tracks and pause and play, but I get no song info through any app.
Very, very frustrated about this.
duraaraa said:
It's not working, at all, for me.
I have a Sony XAV-601BT stereo in my car, and this worked fine with Samsung phones, Blackberrys, and iPhones. Even the Xperia ZL worked for AVRCP.
This one isn't. I can skip tracks and pause and play, but I get no song info through any app.
Very, very frustrated about this.
Click to expand...
Click to collapse
I can follow up on this by saying that I took my phone to an electronics store with multiple radios on demonstration. It didn't work on any of them. I'm going to try completely resetting the phone to see if it helps.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
duraaraa said:
I can follow up on this by saying that I took my phone to an electronics store with multiple radios on demonstration. It didn't work on any of them. I'm going to try completely resetting the phone to see if it helps.
Click to expand...
Click to collapse
I'm starting to think it may be a regional/ROM based issue. Mine is on 23.0.A.2.93 and says there are no updates, so I'll see what I can find to make this work.
duraaraa said:
I can follow up on this by saying that I took my phone to an electronics store with multiple radios on demonstration. It didn't work on any of them. I'm going to try completely resetting the phone to see if it helps.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
I'm starting to think it may be a regional/ROM based issue. Mine is on 23.0.A.2.93 and says there are no updates, so I'll see what I can find to make this work.
Click to expand...
Click to collapse
Interesting, let me know what happens, that's the same exact problem I'm having. Also, I ordered my phone from the UK but I'm in the US, my phone is running 23.0.A.2.105. I see that there is a US firmware that some people are installing so I'm going to try installing that to see if anything changes.
ikon8 said:
Interesting, let me know what happens, that's the same exact problem I'm having. Also, I ordered my phone from the UK but I'm in the US, my phone is running 23.0.A.2.105. I see that there is a US firmware that some people are installing so I'm going to try installing that to see if anything changes.
Click to expand...
Click to collapse
Ugh. I wish I had known that. I just spent the last hour updating to the exact firmware you are on, and trying it, again with failure.
If you have more energy than I do, please go ahead and try the other various FTFs available
Just to save you guys a bit of time. I don't think your problem is region based either. I'm in Canada and I also imported my Z3C from UK and my track info displays perfectly fine over Bluetooth. My phone is bone stock.
Have you guys tried contacting Sony?
Eclypz said:
Just to save you guys a bit of time. I don't think your problem is region based either. I'm in Canada and I also imported my Z3C from UK and my track info displays perfectly fine over Bluetooth. My phone is bone stock.
Have you guys tried contacting Sony?
Click to expand...
Click to collapse
Could you be so kind as to let me know what head unit or other device you're using that it's displaying on?
Worst case scenario is I guess I have to throw some money at a new head unit.
The odd thing is I couldn't find any that worked at a local store. I tried quite a few.
duraaraa said:
Could you be so kind as to let me know what head unit or other device you're using that it's displaying on?
Worst case scenario is I guess I have to throw some money at a new head unit.
The odd thing is I couldn't find any that worked at a local store. I tried quite a few.
Click to expand...
Click to collapse
I'm using my factory head unit. 2013 Land Rover
I wanted to let you guys know that I heard from Sony about this issue. They acknowledged the bug and claim it will be fixed in the Android L update.
I no longer have this phone (because AVRCP didn't work, and it's kind of important to me) but for those of you who suffer from this, hopefully Sony will fix it.
Here's verbatim from Sony:
According to our internal teams, the issue should be fixed in the Android L release for the Z3 Compact.
Best regards,
Joe from Developer World
It worked fine for me. I also got the Sony Head Unit in my car (XAV-BT602).
What's really confusing me is that it worked fine even with displaying track titles and so on but somehow (and I really can't figure out what I could have changed) it doesn't work anymore. If someone finds a solution for this I would very appreciate his help.
duraaraa said:
I wanted to let you guys know that I heard from Sony about this issue. They acknowledged the bug and claim it will be fixed in the Android L update.
I no longer have this phone (because AVRCP didn't work, and it's kind of important to me) but for those of you who suffer from this, hopefully Sony will fix it.
Here's verbatim from Sony:
According to our internal teams, the issue should be fixed in the Android L release for the Z3 Compact.
Best regards,
Joe from Developer World
Click to expand...
Click to collapse
I suffer from the same Issue that the song information are not transmitted regularly. Only after a reconnect the songinformation is transferred once. I posted this issue in the support forum, but there is no reply up to now So i have left a remark about the support forum's quality ... Let's see
THX for your post
Rhonin
Rhonin86 said:
I suffer from the same Issue that the song information are not transmitted regularly. Only after a reconnect the songinformation is transferred once. I posted this issue in the support forum, but there is no reply up to now So i have left a remark about the support forum's quality ... Let's see
THX for your post
Rhonin
Click to expand...
Click to collapse
I also posted there to get you some support in the forum. I also contacted the support and I'll keep you informed if I know anything new.
At least I can confirm that audio info via bluetooth works in BMWs, Minis and Kias...

Guide To DAB For MTCB/MTCC Head Units

There are several DAB options for MTCB head units :
1)The RTL type DVB-T/FM dongle and the Wavesink app, see this thread in the hardware mod section: http://forum.xda-developers.com/and...development/adding-dab-functionality-t3208344
2) Use DVB-T card or module specifically for MTCB head units and use the "radio" function. These can be bought with the head unit or purchased separately. Some manufacturers like KGL/HuiFei use and add on box, others like Klyde, use cards mounted inside the unit. In factory settings, at the last count, there were about 12 different types of TV tuner that can be selected.
3) Or use general Android USB DVB-T dongle and use the "radio" setting on its accompanying app. If this method is chosen, obviously you dont need to go into factory settings and pick a tuner, as these settings are only for DVB-T tuners bought with/for MTCB head units.
(Radio through a DVB-T card IS digital (using either MPG2 or MPG4 depending on the type of DVB-T tuner you have) but it is not DAB. Its also dependant on what radio channels your country chooses to transmit over DVB-T, for instance in the UK in my local area, none of the local stations are transmitted and not all of the national ones are either.)
4), 5) & 6) Dension sell 3 Android DAB products, one that uses BT to connect (which may prove a problem with the BT implementation on MTCB head units, edit: May 2016, the BT type seems to no longer be available), one that connects via USB and 1 that uses FM modulation (which means station names/info displayed via RDS in the FM/AM radio app, but a separate controller for the DAB for changing channels is needed) see here : http://www.dension.com/products#dab-radio-solutions
7) Navall sell a DAB module for their units, they sell both KGL (Hui Fei) units and also the Ownice head unit (the Ownice is NOT an MTCB type unit) see here : http://navallstore.com/Options/DAB -DAB-plus(Digital-Audio-Broadcasting)
8) Joying sell an add on DAB box (its not L band compatible though) : https://www.carjoying.com/joying-di...iversal-android-car-auto-radio-head-unit.html
9) FIAMM make a DAB antenna with built in tuner and BT, so youd simply install the antenna and use BT on your head unit to connect to BT (there is an app available), how it would work with the BT on MTCB head units, however, is unknown :
http://www.smartantenna.it/en/page-product.php
https://play.google.com/store/apps/details?id=com.fiamm.sm2&hl=en
10) And finally Klyde sell a DAB module specifically for their units (I ve just bought a new Klyde head unit with it). They use a DAB module made by Shinwa who also supply DAB modules to Blaupunkt, Pure and Philips. I m told it is not retro fittable as modifications are needed to the board, I ve tried to make it work on my non DAB Klyde unit. but I ve had no luck, so far at least. Its a separate module, but its quite small (approx 10cmx4cmx5cm). Its small enough to be mounted inside the unit, something I intend to do with mine. It uses the DAB app that started appearing in ROMs from June (2015), although they have recently updated it. I ve added pictures of the module and the new app. It works quite well, although I m not over keen on the interface of the app personally, but it can be modded like any other MTC app. As the DAB app appears in ROMs since June, its been developed by MTCB (who develop ALL the software for ALL the MTCB type headunit, which is why they are so similar and have interchangeable software, WHICHEVER manufacturer version you have) this may mean that the other manufacturers will have OEM DAB options soon - I m sure MTCB have not developed the DAB app just for Klyde. So far at least, Klyde is the only company selling DAB units that use this app, AFAIK Navall use a different app and set up.
Sweet! I may replace my current hu in the near future then; quad core and dab+ would be worth it
Does the app not give you channel list? Only next/prev?
Brendo said:
Sweet! I may replace my current hu in the near future then; quad core and dab+ would be worth it
Does the app not give you channel list? Only next/prev?
Click to expand...
Click to collapse
Soz for delay, I m not getting emails when my posts get replies, for some reason.
Yeah, there is a channel list, you press the menu button on the top left I think, its hard to tell cos I using it with horizontally mounted DVB-T antennas so I only get that channel currently, I need to get a proper DAB antenna !
I ll change this thread to a general "DAB for MTCB Headunits" thread soon and list all the DAB/digital radio options - basically the Navall DAB module, RTL DVB-T tuners with Wavesink, this DAB module from Klyde and using a DVB-T card/module/usb TV dongle to receive digital radio through digital tv).
FYI, there's already a DAB thread started in the hardware section:
http://forum.xda-developers.com/and...development/adding-dab-functionality-t3208344
typos1 said:
Soz for delay, I m not getting emails when my posts get replies, for some reason.
Click to expand...
Click to collapse
Did you check that you are subscribed to the thread?
robertut said:
FYI, there's already a DAB thread started in the hardware section:
http://forum.xda-developers.com/and...development/adding-dab-functionality-t3208344
Click to expand...
Click to collapse
I've also been thinking about merging this into the other one. What do you, @typos1, think about that? As this is a new thread it would work...
dark alex said:
Did you check that you are subscribed to the thread?
Click to expand...
Click to collapse
Lol, I AM subscribed because I started it ! Still I got an email for your reply, I think t may be to do with the changes at XDA recently.
dark alex said:
I've also been thinking about merging this into the other one. What do you, @typos1, think about that? As this is a new thread it would work...
Click to expand...
Click to collapse
robertut said:
FYI, there's already a DAB thread started in the hardware section:
http://forum.xda-developers.com/and...development/adding-dab-functionality-t3208344
Click to expand...
Click to collapse
I saw the other thread, but that was specifically for using the Wavesink app with RTL dongles, which is technically a hardware "mod" as you are adding hardware, whereas this was meant to be a general DAB/digital radio guide, hence putting it in the "general" section, also, if you buy a unit with DAB already, its not a "mod". I ve added a link to the Wavesink DAB thread. Maybe you could re-name that thread "Using Wavesink for DAB" or something ? I think you d have to re-name this one as well, as I dont think threads can be re-named by non mods (take it youre a mod now Alex ?!), can you re-name it "Guide to DAB on MTCB headunits" ? And if there are threads about DVB-T dongles, the Dension DAB options and DVB-T tuner supplied with MTCB head units (I know all have been discussed in the original thread) I can add links to them in this thread also.
(Need to reply to your pms BTW Alex, I will do soon)
@dark alex - I found out how to edit the thread title - double click to the right of it before you go into the thread, changed title !
is there somewhere to get an updated apk for the DAB app for the pumpkin headunit, the one on it at the minute is dross....it wont store stations and if you switch screen views it dumps all it had 2 seconds before
Hi sorry for my english.
I'm italian. Dab is not diffuse.
My problem is mct radio because the AF not work. So i think to buy an external FM USB receiver.
Aswers:
1 Which i must buy?
2 can i connect car antenna directly to usb receiver?
Inviato dal mio SM-G920F utilizzando Tapatalk
@typos1 - would you please share your Klyde DAB apk ? From the picture it seems you have some newer version than I do. Thanks.
Sure its on the fileserver in the "apps" section.
Volume
has anyone using the new DAB app found out how to lower the volume so you can hear the navigation voices? the volume seems too loud and all other sounds are quiet?
This Klyde DAB+ unit sounds through Android or just you can control over Android and sounds trough MCU like the FM radio?
peti007 said:
This Klyde DAB+ unit sounds through Android or just you can control over Android and sounds trough MCU like the FM radio?
Click to expand...
Click to collapse
It should be MCU controlled like the FM/AM radio app.
@typos1 , have you had any luck on using the DAB module from Klyde with your other headunit?
It would not be that the module are using a usb port along with an analog input??
It wont fit on my JY unit because it lacks the 2 sockets on the back that KLD units have. Theres no usb on it, just those 2 plugs and an SMA for the antenna.
DAB App
Is the DAB App Version from the Fileserver the only one you have? It has to work with the DAB+ Module from Klyde. Does anyone know, how to use the app? At the first start I found national stations (like ENERGY) AND local stations (like hr). I'm living in Germany, so sorry for my bad english. After a factory reset, I only get the national stations, either with L-Band turned on or off. What can I do to get all stations?
masterhacka said:
Is the DAB App Version from the Fileserver the only one you have? It has to work with the DAB+ Module from Klyde. Does anyone know, how to use the app? At the first start I found national stations (like ENERGY) AND local stations (like hr). I'm living in Germany, so sorry for my bad english. After a factory reset, I only get the national stations, either with L-Band turned on or off. What can I do to get all stations?
Click to expand...
Click to collapse
I had the same problem, but got a new DAB.apk from the seller . Where could I upload it?
nordream said:
I had the same problem, but got a new DAB.apk from the seller . Where could I upload it?
Click to expand...
Click to collapse
Whats it called ? I got DAB (2) app from Klyde. PM me and I ll send you my email address then I ll upload it to the fileserver.
masterhacka said:
Is the DAB App Version from the Fileserver the only one you have? It has to work with the DAB+ Module from Klyde. Does anyone know, how to use the app? At the first start I found national stations (like ENERGY) AND local stations (like hr). I'm living in Germany, so sorry for my bad english. After a factory reset, I only get the national stations, either with L-Band turned on or off. What can I do to get all stations?
Click to expand...
Click to collapse
I just have the DAB app that appeared in "OEM" app in June and the DAB (2) app that I put on the fileserver, just go through all the settings and play about with it. Are you sure its not the signal ? Do you have a boosted antenna ?
I have tested all settings with no luck. I don't think that it is the antenna because I am using the stock antenna wich is delivered with the DAB+ module.
In your Fileserver I can only find the dab(2).apk. Where can I find the oem version of the app?

Tyre Pressure Monitoring System (TPMS) For MTCB Head Units

TPMS has beenn mentioned a few times in the original thread, but AFAIK no one has managed to find out how/if any TPMS modules will work. I bought a TPMS module from Klyde, it comes with 4 valve caps and a strange mini USB thing that I assume allows you to plug another mini USB device into the unit at the same time.
Unfortunately I cant get it to work with the built in TPMS app that started appearing in ROMs from June either on my old unit or my new one, I ve tried searching for the device in the BT app and the BT in settings but I get nothing, I m awaiting a response from Klyde.
If anyone has any ideas on how to get it to work then let me know, but its good to see TPMS hardware available for these devices - even if its not working . . yet !
Can you share link from TPMS module?
My brain is stuck what is TPMS? I am sure I should know but i don't get it
Guess youre talking about Tire Pressure Metering Sensor?
would you probably add a hint to your OP and title so others know what you mean? Remeber the non-english-speakers here
Yes this is it (Tire Pressure Metering Sensor).
dark alex said:
My brain is stuck what is TPMS? I am sure I should know but i don't get it
Guess youre talking about Tire Pressure Metering Sensor?
would you probably add a hint to your OP and title so others know what you mean? Remeber the non-english-speakers here
Click to expand...
Click to collapse
Yes, its Tyre Pressure Monitoring System, sorry @dark alex.
Billkaza said:
Can you share link from TPMS module?
Click to expand...
Click to collapse
I simply bought it from Klyde, there was no link, I guess you have to ask them.
It turns out it cant be used with DAB, which is why I cant get it to work - the cable to attach it is the same as the DAB module they sent me.
I m not sure if its BT or maybe NFC or something. I ll report back with results when I get it to to work
Does anybody try this TPMS solution with his HU?
http://www.aliexpress.com/item/Smar...77_80_61,searchweb201644_5,searchweb201560_10
Does the app work in landscape mode?
Can the app start with background mode?
Does the external (valve cap) sensor show accurate value?
I have been using this TPMS system in Volkswagen Polo and my MTCB head unit since 3 months now and couldn't be happier with it.
It activates when you press the button because it invokes the reverse camera display source every time you call it into action.
http://www.aliexpress.com/item/Stee...1644_2_79_78_77_82_80_62_81,searchweb201560_6
I have tried these two models purchased at Amazon and they work perfectly. I have them installed on my cars.
The only drawback is that you need Bluetooth 4.0 and HuiFei radio does not have it. I have commissioned an RX USB Bluetooth for Android on Deal Extreme, to see if it works.
So far I'm seeing it in my S5 Galaxy.
All the links:
http://www.amazon.es/Sensores-Inter...2?ie=UTF8&qid=1448974215&sr=8-2&keywords=tpms
http://www.amazon.es/Sistema-Sensor...?ie=UTF8&qid=1448974381&sr=8-67&keywords=tpms
http://www.dx.com/es/p/v40-usb-2-0-...s-android-os-black-silver-250228#.VoqxKORgnDc
http://android.myapp.com/myapp/detail.htm?apkName=com.eckom.tpms
Turns out you need a special lead that I wasnt sent orignally, it plugs into one of the sockets on the back of the unit, theyre sending me one, I ll post again when I get it.
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Dont know, ask the seller.
But in any case if it works with a Joyous unit it will work with ANY MTCB head unit. There is no such thing as a "Joying" head unit - Joying/CarJoying are simply re-sellers of Shenzhen Joyous head units.
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Yes I think.
It looks made specifically for these HUs. So I supposed they tested them.
And screens look like built-in TPMS app that I got preinstaled on my HU (KGL). So I supposed it should work.
But I would preffer ecternal sensors, not ibternal ones. I have 4x4 which reqiires regular tire rotation and ibternal sensors are not suitable as I would need to remove and refit them on every tire rotation.
Is there external versio? I couldnt find it on AlliExpress.
The one I mentioned in my first post has valve mounted sensors and obviously works with MTCB head units
pa.ko said:
Yes I think.
I would need to remove and refit them on every tire rotation.
Click to expand...
Click to collapse
Why? Sure, if they are somehow hard coded to location its sort of funny when they might not match the picture, but you only have 4 tires. Its pretty easy to check them when they are low.
You want internal sensors for TPMS. Less chance for losing them.
http://www.ebay.com/itm/Cable-Bueto...Tire-Pressure-Monitoring-System-/271315933336
I understand the point about tire rotation and internal sensors. Would it be possible to make the same rotation in the app, since all sensors are doing the same thing anyway? Eg. If you rotate your right front to right rear, make the same in the app to correspond with the sensor location?
Sent from my Mi-4c using xda premium
Yes, mapping is possible. Depends on product.
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Hi All,
I have also interest for this. Somebody could give some information ? It works, or any other bluetooth type, using with external attached bluetooth 4.0 dongle ?
Well, I found out most of the connections for the TPMS as Klyde didnt send me a lead - power and ground were easy same as the DAB box, then, as its just a mini usb connection its just data + and data -, I know where the one of those wires goes, and narrowed it down to 2 pins for the other, I ve tried both pins and several versions of the TPMS app, but cant get anything. I ve tried looking for BT devices on my phone I thought I found 1 but my phone wouldnt connect and the headunit's BT wouldnt see it, my phone wouldnt connect and after removing all the batteries on the TPMS it still showed up so it couldnt be that. Totally stumped, just cant get it to work.
TPMS-Type
Let me inform you that for some time I'm trying to find a TPMS system that works well with Android auto MTCB-C I have made several purchases and placements from various vendors I will mention my experience to help future stakeholders.
For GS, KD, and JY machines, the following set works very well:
https://www.aliexpress.com/item/TPMS-for-SilverStrong-Android-CAR-DVD-Car-Tire-Pressure-Monitoring-System-4-Sensors-Alarm-Tire-Temperature/32803916037.html?spm=2114.13010608.0.0.IU13AC
It has its own very friendly app and it works with automatic start-up in the background and immediately informs if something goes wrong with the tires of the car, I recommend it for the above!
But last time I discovered another type with external valves that works very well with a Klyde machine and that's it:
https://www.aliexpress.com/item/Car-Tire-Pressure-System-TPMS-Only-for-Klyde-Brabd-Car-DVD-Radio-display-the-tempreature-and/32806152062.html?spm=2114.13010308.0.0.pPlup1
OR
https://www.aliexpress.com/item/TPMS-Tyre-Pressure-Monitoring-System-For-Car-Android-DVD-GPS-Radio-Player-Car-Stereo/32808928613.html?spm=2114.13010308.0.0.OJcJUk
I believe I helped my friends.
spirosme said:
Let me inform you that for some time I'm trying to find a TPMS system that works well with Android auto MTCB-C I have made several purchases and placements from various vendors I will mention my experience to help future stakeholders.
For GS, KD, and JY machines, the following set works very well:
https://www.aliexpress.com/item/TPMS-for-SilverStrong-Android-CAR-DVD-Car-Tire-Pressure-Monitoring-System-4-Sensors-Alarm-Tire-Temperature/32803916037.html?spm=2114.13010608.0.0.IU13AC
It has its own very friendly app and it works with automatic start-up in the background and immediately informs if something goes wrong with the tires of the car, I recommend it for the above!
But last time I discovered another type with external valves that works very well with a Klyde machine and that's it:
https://www.aliexpress.com/item/Car-Tire-Pressure-System-TPMS-Only-for-Klyde-Brabd-Car-DVD-Radio-display-the-tempreature-and/32806152062.html?spm=2114.13010308.0.0.pPlup1
OR
https://www.aliexpress.com/item/TPMS-Tyre-Pressure-Monitoring-System-For-Car-Android-DVD-GPS-Radio-Player-Car-Stereo/32808928613.html?spm=2114.13010308.0.0.OJcJUk
I believe I helped my friends.
Click to expand...
Click to collapse
Thanks for your post - I have the Last type, Klyde themselves supplied me with it, but they did not send me the lead and they did not reply to me when I asked for it, so I had to make one, but I still cannot get it to work, could you post a picture of the lead (the end that plugs into the head unit) so I can see which wires go where (I have seen the picture in your 3rd link before, but I cannot see where all the wires go) ?

Recommendations for head unit.

I would like some recommendations for a double din head unit. I wanted to have nav, rear view cam support, aux and 4G/WiFi.
I was going to make my own system with a raspberry pi, but after pricing stuff out I'm gonna be looking at a similar price of $200+. So I would rather just buy an android head unit since that's the OS I want to use anyway and it's still not that smooth on a rasperry pi. Although Google is going to offically suport it soon.
Thanks
Sent from my VS985 4G using Tapatalk
Check on Crutchfield.com. I've only seen one unit that runs wifi(its alot more the $200), and havent seen one that runs cell band
Check out 'Joying'. You will have it in a few days.
If they have a package for your car then she is plug&play. Many of the units are the same but come with different stuff so the price changes. Some have volume knobs - do get that.
Joying... (can't post links so you have to type in)
carjoying-dot-com
I personally got this setup for my Nissan Frontier truck...
and i now have the 5.1 update hardware to update from kitkat. You might want to ask for the 5.1 models.
Yeah after I have been looking around the joying is probably what I'm gonna go with.
Sent from my VS985 4G using Tapatalk
The unit I got was the 'JY-NQ128'.
If you search for it on the joying site you will see it is set up for Nissan cars/trucks meaning they include plug and play cables for that vehicle so it's working in minutes.
That part number also comes with backup camera, gps stuff, etc. It has a volume knob on the top. Some other packages will have the same unit at a different price but come with say an OBD2 dongle and a volume button in the middle or no buttons or no navigation. Some have a DVD player.
A note about navigation... You have to ask for it. They will then send you a link for the 'IGO' software and maps. You install it on the blank SD card they include. IGO is kinda a standard I think but you can also use Google maps, Here, Waze, whatever you like. In settings you just set the nav button to whatever.
You can buy cables, backup camera, etc from their site if they don't have a package for your car.
I have bad ears so can't be trusted on its ability to play music but seems to work fine. I bought it mostly for its backup camera, navigation and of course the powerful Android system. My calendar is on there, email, etc.
Nice unit 1024x600 screen too.
daveEM said:
The unit I got was the 'JY-NQ128'.
If you search for it on the joying site you will see it is set up for Nissan cars/trucks meaning they include plug and play cables for that vehicle so it's working in minutes.
That part number also comes with backup camera, gps stuff, etc. It has a volume knob on the top. Some other packages will have the same unit at a different price but come with say an OBD2 dongle and a volume button in the middle or no buttons or no navigation. Some have a DVD player.
A note about navigation... You have to ask for it. They will then send you a link for the 'IGO' software and maps. You install it on the blank SD card they include. IGO is kinda a standard I think but you can also use Google maps, Here, Waze, whatever you like. In settings you just set the nav button to whatever.
You can buy cables, backup camera, etc from their site if they don't have a package for your car.
I have bad ears so can't be trusted on its ability to play music but seems to work fine. I bought it mostly for its backup camera, navigation and of course the powerful Android system. My calendar is on there, email, etc.
Nice unit 1024x600 screen too.
Click to expand...
Click to collapse
Does your unit have android auto Capabilites?
lbus9168 said:
Does your unit have android auto Capabilites?
Click to expand...
Click to collapse
Not sure. I've not researched Android Auto but I suspect it is totally limited (AA).
My unit is full blown Android. You have to be careful here. For example streaming a movie while driving is possible. It is initially shut off in settings but you can turn it on.
The unit is like a Nexus phone. No limitations.
daveEM said:
Not sure. I've not researched Android Auto but I suspect it is totally limited (AA).
My unit is full blown Android. You have to be careful here. For example streaming a movie while driving is possible. It is initially shut off in settings but you can turn it on.
The unit is like a Nexus phone. No limitations.
Click to expand...
Click to collapse
I think the biggest thing im looking for is a nice driving friendly UI, with good navigation. Android auto ticks all my requirements.
How about “Pumpkin”?
Android 5.1 Lollipop Stereo https://www.amazon.co.uk/Pumpkin-UNIVERSAL-Mirror-link-Bluetooth/dp/B0197X0IKM

Android head unit choice for BMW e90 U.K

Hi Peeps
Really sorry if im in the wrong forum and im here to learn but hope someone can point me in teh correct direction
Im in the U.K and we dont seem to be able to buy Joying head units which seem to be popular in the states.
Im looking at Eonon or Xtrons mainly with the quad core processors and 5.1 Lollipop.
Is there anything i should be looking for or best avoided?
Thanks for any help, i really appreciate it.
Should be able to buy joying in UK they have a warehouse there try Amazon or eBay
Sent from my Nexus 7 using Tapatalk
Thanks, Ive done a search on Amazon and ebay for Joying e90 and get no results, ive also been on the carjoying u.k website and they dont even list the e90 as an available option
Buy from joying direct they will ship via dhl quick
Sent from my A0001 using Tapatalk
I have the xtrons e90 unit in my car. Seems similar to joying ect. One thing that took me ages to figure out as no instructions or guidance was given at all, was that there is two 12v yellow power leads and both need to be plugged in. One needs to go direct into the fusebox or to the battery.
Apparently BMW loses constant 12v power after a certain timer, roughly when the alarm system kicks in. So this means all power is lost to the head unit, including the small amount it needs to keep the MCU memory, which is your radio station presets and stuff. Also causing a much longer boot up. So I had to wire one of the cables into the central locking system fuse. Dead easy but you do need to buy a few bits from amazon for a few quid, otherwise the unit is a ballache.
Hope that helps
Cheers peeps, great advice. I've found auto pumpkin UK now so may order from them. The Xtrons , eonon and pumpkin all look identical so not sure if there is a difference as all seem to come from the same factory?
Should I be looking for the quad core 5.1 versions ?
Cheers all and thanks for the advise.
P.S I'll try and find the central locking fuse and use an add a circuit fuse to it.
Damit17 said:
Buy from joying direct they will ship via dhl quick
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks, I really want to avoid a big hit on import tax to the UK and have somewhere in the uk in case of return
But would joying not show it as a UK sale as they havea warehouse there
Sent from my Nexus 7 using Tapatalk
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Andrea69 said:
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Click to expand...
Click to collapse
Regards to radio presets read what I put above.
Dec64 said:
I have the xtrons e90 unit in my car. Seems similar to joying ect. One thing that took me ages to figure out as no instructions or guidance was given at all, was that there is two 12v yellow power leads and both need to be plugged in. One needs to go direct into the fusebox or to the battery.
Apparently BMW loses constant 12v power after a certain timer, roughly when the alarm system kicks in. So this means all power is lost to the head unit, including the small amount it needs to keep the MCU memory, which is your radio station presets and stuff. Also causing a much longer boot up. So I had to wire one of the cables into the central locking system fuse. Dead easy but you do need to buy a few bits from amazon for a few quid, otherwise the unit is a ballache.
Hope that helps
Click to expand...
Click to collapse
Dec64 said:
Regards to radio presets read what I put above.
Click to expand...
Click to collapse
Thanks a lot!
There are several empty positions in the fusebox. Do you suggest to wire the BATT+ wire directly or to install it with a 10A fuse?
Andrea69 said:
Thanks a lot!
There are several empty positions in the fusebox. Do you suggest to wire the BATT+ wire directly or to install it with a 10A fuse?
Click to expand...
Click to collapse
you could do either apparently.
Personally i just purchased these, https://www.amazon.co.uk/gp/product/B01E3PQWUE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and used one of them in the fuse for the central locking system, as it will always have 12v. Was really simple, tad fidly running the wire that's all.
Andrea69 said:
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Click to expand...
Click to collapse
I am having similar problems myself.
-BMW i-BUS it doesn't detect it at all. I need the CAN file for the unit, but no luck as of yet.
-Home button on the unit doesn't work anymore? Factory restore fix's but it stops again after 2 days!
-Most of the settings are locked from view. I access developer mode and it auto kicks me back to bluetooth phone menu.
- Front camera displays track and theres no option to remove it. So annoying!!
- LED colour APP has gone. This went after I did a MCU upgrade which I was given by seller.
- When I power up Clicker is always set to on. Front camera always resets to normal instead of saving mirroring. Other various settings are forgotten as are radio presets.
- Doesn't detect iPhone via USB only Bluetooth. But does charge... Slowly.
You had any luck with yours? I have a E90.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
maxxoutput said:
Hi Peeps
Really sorry if im in the wrong forum and im here to learn but hope someone can point me in teh correct direction
Im in the U.K and we dont seem to be able to buy Joying head units which seem to be popular in the states.
Im looking at Eonon or Xtrons mainly with the quad core processors and 5.1 Lollipop.
Is there anything i should be looking for or best avoided?
Thanks for any help, i really appreciate it.
Click to expand...
Click to collapse
How you getting on with this? I'm having problems with my e90.
Jay_brown47 said:
I am having similar problems myself.
-BMW i-BUS it doesn't detect it at all. I need the CAN file for the unit, but no luck as of yet.
-Home button on the unit doesn't work anymore? Factory restore fix's but it stops again after 2 days!
-Most of the settings are locked from view. I access developer mode and it auto kicks me back to bluetooth phone menu.
- Front camera displays track and theres no option to remove it. So annoying!!
- LED colour APP has gone. This went after I did a MCU upgrade which I was given by seller.
- When I power up Clicker is always set to on. Front camera always resets to normal instead of saving mirroring. Other various settings are forgotten as are radio presets.
- Doesn't detect iPhone via USB only Bluetooth. But does charge... Slowly.
You had any luck with yours? I have a E90.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
How you getting on with this? I'm having problems with my e90.
Click to expand...
Click to collapse
Hi. Try from AliExpress. Dhl or tnt etc 5 days is here. Yellow cable must ti be connected for the settings memory.

Categories

Resources