Hai guys.here im posting a video tutorial how to install custom rom in karbonn titanium s5..hope u guys follow it for perfect installation
video link: http://youtu.be/zBBZYOZnY_M
here i showed the rom installation of nemesis which include gapps installation.if ur rom does not contain gapps installation then u can skip that part.bye.tkcr
And a small thing to tell.whenever u want to install any mod from recovery never forget to mount system in mount/storage
Manual Installation Procedure
Procedure
1.Turn off ur mobile
2.Press and hold volume up +power button at a time and release them when u see red screen
3.now cwm recovery is opened.---(Navigation up=volume up;navigation down=volume down;Selection=power button)
4.go to Backup and Storage and open it
6.click backup---(This backup's ur current rom and stores it in ur sd-card which can be used to restore ur os if necessary)
7.After backup completes go to main menu
8.click on wipe data/factory reset nad then yes
9.now go to main menu and click advanced.u will notice wipe dalvik cache.click it and yes
10.now go to mount/stoarage in main menu and format system.---(Be carefull at this step.never click sys_boot format at any time)
11.now in the same menu u notice mount data and mount system.so mount both data and system.
12.go back to main main.now go to install zip from sd-card
13.select ht ecustom rom rar file and click yes.
14.(read this line completely then press)After completiton of rom installation click reboot system now.if u r installaing any gapps then dnt press reboot(specially for nemesis rom).Goto mount and storage after rom installation.again press mount system.go to main menu.select install zip from sd-card.select ur gapps and intall and reboot now.
Thats it.now ur new rom takes some time to boot up..any queries regarding flashing reply me.hit thanks if helped.encourage all devs.Bye
download link
deepa2119 said:
Procedure
1.Turn off ur mobile
2.Press and hold volume up +power button at a time and release them when u see red screen
3.now cwm recovery is opened.---(Navigation up=volume up;navigation down=volume down;Selection=power button)
4.go to Backup and Storage and open it
6.click backup---(This backup's ur current rom and stores it in ur sd-card which can be used to restore ur os if necessary)
7.After backup completes go to main menu
8.click on wipe data/factory reset nad then yes
9.now go to main menu and click advanced.u will notice wipe dalvik cache.click it and yes
10.now go to mount/stoarage in main menu and format system.---(Be carefull at this step.never click sys_boot format at any time)
11.now in the same menu u notice mount data and mount system.so mount both data and system.
12.go back to main main.now go to install zip from sd-card
13.select ht ecustom rom rar file and click yes.
14.(read this line completely then press)After completiton of rom installation click reboot system now.if u r installaing any gapps then dnt press reboot(specially for nemesis rom).Goto mount and storage after rom installation.again press mount system.go to main menu.select install zip from sd-card.select ur gapps and intall and reboot now.
Thats it.now ur new rom takes some time to boot up..any queries regarding flashing reply me.hit thanks if helped.encourage all devs.Bye
Click to expand...
Click to collapse
download link plzz!! for custome rome.
usanrai said:
download link plzz!! for custome rome.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2235153..here u can find the roms which are available for titanium s5(Credits zeyaan)
thank u
:good:
deepa2119 said:
http://forum.xda-developers.com/showthread.php?t=2235153..here u can find the roms which are available for titanium s5(Credits zeyaan)
Click to expand...
Click to collapse
thanks man!
deepa2119 said:
Procedure
1.Turn off ur mobile
2.Press and hold volume up +power button at a time and release them when u see red screen
3.now cwm recovery is opened.---(Navigation up=volume up;navigation down=volume down;Selection=power button)
4.go to Backup and Storage and open it
6.click backup---(This backup's ur current rom and stores it in ur sd-card which can be used to restore ur os if necessary)
7.After backup completes go to main menu
8.click on wipe data/factory reset nad then yes
9.now go to main menu and click advanced.u will notice wipe dalvik cache.click it and yes
10.now go to mount/stoarage in main menu and format system.---(Be carefull at this step.never click sys_boot format at any time)
11.now in the same menu u notice mount data and mount system.so mount both data and system.
12.go back to main main.now go to install zip from sd-card
13.select ht ecustom rom rar file and click yes.
14.(read this line completely then press)After completiton of rom installation click reboot system now.if u r installaing any gapps then dnt press reboot(specially for nemesis rom).Goto mount and storage after rom installation.again press mount system.go to main menu.select install zip from sd-card.select ur gapps and intall and reboot now.
Thats it.now ur new rom takes some time to boot up..any queries regarding flashing reply me.hit thanks if helped.encourage all devs.Bye
Click to expand...
Click to collapse
thank you i v flashed kitkat one n galxy a4 one by this methodn it worked....:good:
does this methode workes on stoke rome too????
if nt then plz discribe the process plz!
want to flash the old rom.... old iz gold :laugh:
usanrai said:
thank you i v flashed kitkat one n galxy a4 one by this methodn it worked....:good:
does this methode workes on stoke rome too????
if nt then plz discribe the process plz!
want to flash the old rom.... old iz gold :laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=28719715
here universal flasher is provided.follow those instructions.if u got any problem.reply.
deepa2119 said:
http://forum.xda-developers.com/showthread.php?p=28719715
here universal flasher is provided.follow those instructions.if u got any problem.reply.
Click to expand...
Click to collapse
hi, can you provide stock rom for karbonn titanium s2
Karbonn A9* (star) ROM of xperia or micromax or any other which work great
i have karbonn A9* (star) ...and i really pissed of this phone .... i bought karbonn A15 7 month ago but it was not working well so i approached to service center they gave me A9* after 3 month and it is also not working well its hangs all the time restart unnecessarily again n again ....so please please please help to to install some better ROM of any good mobile which will work well ...even of Micomax or XOLO ..any but please help
Im having issues with it not wanting to mount system and data, is there a solution to this? =/
vaibmails1 said:
i have karbonn A9* (star) ...and i really pissed of this phone .... i bought karbonn A15 7 month ago but it was not working well so i approached to service center they gave me A9* after 3 month and it is also not working well its hangs all the time restart unnecessarily again n again ....so please please please help to to install some better ROM of any good mobile which will work well ...even of Micomax or XOLO ..any but please help
Click to expand...
Click to collapse
First; Wrong phone. Learn to use Google.
Second; Every ROM is tailor made for a phone. You can't just install a MMX or a Xolo ROM on your phone.
Third; This user probably doesn't have this phone. She wouldn't be able to help you any more than you can help yourself.
Lastly, I don't want to seem like a rude guy, but please use proper english. It helps with the readability of your post.
I can tell that you are new, so,
Welcome to the community of xda!
Restart your phone
otakurave said:
Im having issues with it not wanting to mount system and data, is there a solution to this? =/
Click to expand...
Click to collapse
You have to restart your phone in case needed you can restore to default rom and then try to install this rom
great thank you
Unlock simlock ! possible?
deepa2119 said:
Hai guys.here im posting a video tutorial how to install custom rom in karbonn titanium s5..hope u guys follow it for perfect installation
video link: http://youtu.be/zBBZYOZnY_M
here i showed the rom installation of nemesis which include gapps installation.if ur rom does not contain gapps installation then u can skip that part.bye.tkcr
And a small thing to tell.whenever u want to install any mod from recovery never forget to mount system in mount/storage
Click to expand...
Click to collapse
Hi...
I have two clone that is truemove beyond 3g which is sim-locked. I bought each 75$ but they did not told me if the phone was sim-locked
is it possible to unlock the phone?
also they made one of sim-slots useless.
please help! can do a sim-unlock? possible flash modem/radio ?
I flashed a stock karbonn rom works fine still sim-locked.
The Gionee M2 has a MT6582 Mediatek chipset.
Follow the Gionee guide on their site for upgrading to KitKat, before you start the process, replace the recovery.img file in the ROM file you downloaded and extracted and replace it with a CWM or Carliv touch recovery file that works for the JB versions, this will give you a custom recovery (power button + up key when booting)
The 800Mb+ KitKat ROM update file has about 300mb of pure bloatware, unknown games etc.
ROOT:
Enable USB debugging
Download SuperSU from the playstore (we will use it to replace the chinese SU file later)
Download RootMaster (google it), this is an apk file probably made by the same chinese dev's who made Vroot
Make sure wifi is on, run RootMaster, all text is chinese, but the press to root button is english, it works, if it doesnt the first time try again (dont press anything else, it has a ton of crapware)
It should prompt that your phone is rooted, give it some time, it actually downloads a chinese version of SU
Now run SuperSU, it will replace the chinese version with the familiar english SuperSU ( although the chinese SU app with the lion emblem and chinese text will still be on your phone)
I recommend doing a full factory reset at this stage and using a root uninstaller app to remove all traces of this chinese RootMaster SU
Xposed Framework:
The amigo system resources interferes with Xposed you can still get it to install the framework by first installing the Xposed apk and then going to the settings of the Xposed installer and checking the box "Disable resources API", this will mean GravityBox WILL fail.
-------------------------------------------------------
Framaroot Doesn't work anymore
The best way to root this is to use Framaroot, Barahir exploit.
Although the Framaroot page on XDA does not list this as a compatible device (yet) it works really well.
All credits for Framaroot go to alephzain : here
------------------
This still works
BACKUP ROM WITH MTKTOOLS:
Download the awesome MTK Droid Root & Tools by rua1 from here
There are many detailed tutorials for using the actual tool ( I used v2.5.3) with detailed pictures etc., I wont reproduce them here, but before you read and follow the tutorials, make sure, your phone is rooted, you have the ADB drivers for your MT6582 chipset and the microsd card you put inside your phone is formatted inside the phone otherwise the backup will throw an error
Create & Install CWM:
Dev rua1's MTKTOOLS can also create a CWM image automatically from the boot.img that is created in the above step. There are detailed tutorials already available on many sites that show step by step how to do this. Installing CWM is up to you, either via Mobile Uncle Tools from the playstore (recommended) and the freshly minted CWM image or via SP Flash Tools using the Backup of ROM created with MTKTOOLS
Getting to Recovery - Hardware Keys
Getting directly to CWM when the phone is shutdown requires the following key press combination:
For KitKat:
Power button + UP volume button gets you to a custom recovery (should you have one)
Power button + down volume button gets you into Factory Mode (Gionee Factory Mode)
For JB:
Press Volume Keys UP/DOWN and Power button simultaneously
Let go once you reach a screen that shows 3 options, here choose recovery, it will then boot directly to CWM
Can u provide M2 Stock Rom Link ???
Sent from my M2 using XDA Premium 4 mobile app
---------- Post added at 06:34 PM ---------- Previous post was at 06:10 PM ----------
MTK droid tool 2.5.3
http://www.mediafire.com/?6z9acf5um65cuj2
Sent from my M2 using XDA Premium 4 mobile app
Want rom for m2
i want custom rom for my gionee m2
Xposed Framework & Stock / Custom ROM's
Xposed Framework works fine on the rooted Gionee M2.
While several modules (like Xprivacy) work, GravityBox via Xposed download fc's, use the GravityBox Apk instead
As for M2 Stock ROM, I suggest take a backup of your own phone ROM, there is little chance that Gionee will make stock ROM's available for M2 (a very new device) anytime soon.
For other Gionee ROM's (stock) external sites like androidXDA have a few ROM's for download but none for M2
There are no custom ROM's for M2, if you want a smoother/cleaner experience try uninstalling some bloatware and change the DPI using an Xposed module.
Request
Hey, it would be nice if you could customize the backing up ROM and re flashing tutorials for the for the m2. It would be quite helpful, you know which set of options to choose etc... beginners like me could make a mistakes with regards to those, since you have already done these procedures your experience could prove valuable. also do you know if the bootloader is unlocked on this phone? and how to check that?
rjspark89 said:
Hey, it would be nice if you could customize the backing up ROM and re flashing tutorials for the for the m2. It would be quite helpful, you know which set of options to choose etc... beginners like me could make a mistakes with regards to those, since you have already done these procedures your experience could prove valuable. also do you know if the bootloader is unlocked on this phone? and how to check that?
Click to expand...
Click to collapse
Being a long time lurker on XDA, I've not managed to rack up enough posts to link to external sites, I tend to find most answers by lurking
But here goes (credits go to the original tuts on other sites): Warning, you may brick your device. This will void your warranty. You should know the risks.
Pre-requisite Steps:
Enable debugging mode on your phone. From your homescreen, tap the Menu button > Settings > Development. Tap 'Debug Mode' and make sure it's checked
Root your M2 using Framaroot, use Barahir exploit
Install Busybox from the Playstore on M2
Download MTK Droid Tools v2.5.3 from XDA, chrome tags this as malware (its not), if your AV detects this as malware then dont worry, its a false positive , disable your Anti Virus tool for good measure for the remainder of your backup job, unzip the MTK tools you downloaded
Make sure the microsd card you put inside your phone is formatted inside the phone otherwise the backup will throw an error - this step is impt.
Connect M2 via USB cable to your PC,Download the ADB drivers for M2, use PDANet (google it) and run it, ADB drivers should get automatically installed; this step is critical, so make sure it works
BACKUP ROM WITH MTKTOOLS:
Go into the extracted MTK Droid Tools folder and right-click on 'MTKdroidTools.exe'. Select 'Run as administrator'.
Wait while MTK Droid Tools communicates with your phone. You'll eventually see the main screen come up with all of your phone's information. Look in the bottom left hand corner of the main window, you should see a green square (if it's yellow, click the 'root' button in MTK Droid Tools, this may trigger SuperSU on your phone to ask you for granting it root, grant it)
In the main menu of MTK Droid Tools select the 'Root, Backup, Recovery' tab
Click the 'Backup' button. MTK Droid Tools will start to read all the data from your phone - this takes a long long time, the log is shown on screen, (if it hangs for very very long time (>45mins) on some step (like backup of system.img) you can pull the USB cable out of the phone and restart it)
After it's finished reading back the ROM, another window will pop up asking you if you'd like to compress the image. Select 'Yes'. This will pack it up into a zip and then let you know it's finished.
CREATE YOUR CWM & INSTALL:
Go to the playstore and download Mobileuncle MTK Tools
Connect the phone to PC via USB (if not connected already) and run the MTKDroidTool as administrator
Go to 'root, backup, recovery' tab
Tick the 'To choose the boot.img file' option - the boot.img got created when you took the backup of your ROM, all files from the ROM backup process are saved inside the MTK Tools folder
Click the 'Recovery and Boot' button
Look for the 'boot.img' file and then open it
You will be asked whether to create the CWM recovery automatically, select 'yes'
MTKDroidTools will prompt you whether to install patched files to the phone, say 'No, then it will prompt you if you want to install the CWM recovery that was created, say "No" - we will use MobileUncle Tools for this, its much cleaner
The process fill be finished, and you can now quit MTKDroidTools
In MTKDroidTools folder, you will see a new folder named 'recovery', and in the folder, you will see two .img files; one with the prefix 'boot' in it, and another one with the prefix 'recovery' in it, copy just the .img file with the prefix 'recovery' to the root of your microSD card
Start MobileUncle Tools in your phone, give it root, its a chinese app, but has english title names as well, select the 'Recovery Update' option, select the recovery .img file you have copied to the root of your microSD card, it will prompt you if you really want this, say 'OK'
The flashing process will run, and then you will be asked whether to boot into recovery mode, say yes and you will boot to CWM, you can now take a nandroid backup as well
Like I mentioned earlier, I'm a lurker on XDA, not a dev, so I may not be able to help beyond this
I have problem in CWM whenever I tried to mount Usb storage it gives error as :
"E:unable to open ums lunfile(no such file or directory)"
I have tried to port Cannibal Open touch recovery as well as Carliv but I think in our phone mout points are conflicting with default CWM mount points. If anyone have any solution most welcome for solution I am ready with Custom Roms for our Phone Gionee M2 but strucked in CWM ,if CWM will not work than we will be not able to flash any ROM.
Re:EDIT
ALL PROBLEM SOLVED!!!!!!
New Touch Based Carliv Recovery
Click HERE
NEW ROM LINKS ADDED
CLICK HERE
OR
CLICK HERE
Shivam Bhalla said:
New Touch Based Carliv Recovery
Click HERE
Click to expand...
Click to collapse
Successfully flashed this Carliv recovery img, in my Gionee m2. want to try new OS:laugh:
Guys check out Miui ported by Arnab
http://forum.xda-developers.com/showthread.php?t=2711816
OP plz mention these 3 roms in the first post! i hope more development is seen for Gionee M2
very good
very good thread helped me alot
rishiandri said:
Guys check out Miui ported by Arnab
http://forum.xda-developers.com/showthread.php?t=2711816
OP plz mention these 3 roms in the first post! i hope more development is seen for Gionee M2
Click to expand...
Click to collapse
installed today but reverted back to ASOP Rom, this rom needs some updates and bugfixs,
Scatter File of Gionee M2
Can anyone please give me scatter file of Gionee M2...
Kalpesh Sharma said:
Can anyone please give me scatter file of Gionee M2...
Click to expand...
Click to collapse
enjoy
Thanks for the scatter file.....
Anyone plz. port SamFlare V5 to gionee m2
Here is the link for the ROM
http://forum.xda-developers.com/showthread.php?t=2530755
Error with borohir with frama 1.9.2 su
Sent from my M2 using XDA Premium 4 mobile app
Try with Framaroot 1.9.0 "barahir".. I rooted my phone with this version and also rooted 3 more with same.
Sent from my Gionee M2.
Use Framaroot 1.9.2 And Click Barahir to root your gionee m2....
Hit THANKS if i helped u....
It is a ported rom by me #shaizada for spice mi 504
1. u have rooted device .,,, if not root through kingo root,iroot software.
2.you have cwm/twrp/philz recovery installed if u dont have any of these recovery ,,,then i gave u my developed recovery through mtk droid tool.... see attachments for recovery.
3.fisrt root your devise then instal mobile uncle tool from playstore then backup your imei and then copy recovery image and pure l.zip file in ur devise then open mobile uncle tool and click on recovery update and choose your recovery.img file.
4.Download patch.zip from from attachments and place in ur sd card
5.then go to ur recovery menu (switch off ur phone then press home+volume up button)
6. Delete wipe data factory reset/wipe cache/wipe davlik cache.
7.open mount and storage format system/data/cache.
8.then go to instal zip from sd card and instal rom then instal patch file.
ALL DONE NOW REBOOT UR PHONE AND ENJOY
keep enjoying its totally bug free
#NOTE: Download mobile uncle tool from attachments......IF YOU LOST YOUR IMEI NO. THEN resotre ur imei no which you backup before....
Download rom from this link https://docs.google.com/file/d/0B0NIHXGf9zR3N2tvZ0JwQ2FSejg/edit?usp=docslist_api
this rom works awesome, no bugs , ive been using it since long , no issues , awesome
:good::laugh:
thanks
Google keyboard is stopping continously even after installing patch.zip pls help me out
iam currently using lenovo a7000 turbo on marshmallow and midway on rooting process as i installed twrp2.8.7 through fastboot....but i cannot use usb otg to make backup. so i want to update twrp to 3.0.2 . how can i update twrp .plz help .iam a beginner and i fear bricking my phone..plz help:crying::crying::crying:
tips:
-download the twrp version that you like in .img format
-there will be an alternative option in the twrp to install image/zip choose image(by default its zip)
-select the recovery that u downloaded and select recovery option when asking which to mount
-thats it.
hit thanks if i helped got any queries,dont hesitate i will help you if i know
cheers,happy flashing
aswinp222 said:
tips:
-download the twrp version that you like in .img format
-there will be an alternative option in the twrp to install image/zip choose image(by default its zip)
-select the recovery that u downloaded and select recovery option when asking which to mount
-thats it.
hit thanks if i helped got any queries,dont hesitate i will help you if i know
cheers,happy flashing
Click to expand...
Click to collapse
will any twrp image work
Yea,sure.it will show error if it's corrupted don't worry
When I put TWRP.img on my sdcard and boot into TWRP. it doesn't show up in TWRP.
Hello... i am a samsung s advance gt-i9070 user .....I want to flash cm 11 or cm12.1 and I have formatted I system ......
I have no backups ....:crying: My kernel is core e refresh r24. ......
Pls help me ...
###I have tried to flash many roms but it still says#### this is for jancie.. GT i9070.... Your device is a " " ####
What do I want to do!!!! My phone is gti9070
PLZ HELP......................................
Try to install this: https://forum.xda-developers.com/showpost.php?p=70844845&postcount=24
I need a zip that can make my phone know that it is gt i9070 in recovery mode while flashing rom
Yes, and you can do it by installing the rom I've linked before: https://forum.xda-developers.com/showpost.php?p=70844845&postcount=24
Glado king said:
Hello... i am a samsung s advance gt-i9070 user .....I want to flash cm 11 or cm12.1 and I have formatted I system ......
I have no backups ....:crying: My kernel is core e refresh r24. ......
Pls help me ...
###I have tried to flash many roms but it still says#### this is for jancie.. GT i9070.... Your device is a " " ####
What do I want to do!!!! My phone is gti9070
PLZ HELP......................................
Click to expand...
Click to collapse
Its bcos the rom could not read your build.prop. as u have formatted system the build.prop file is deleted. Some roms check build prop file to know its the correct device.
.
And our Device id is janice.
U could use odin to flash back to stock rom.
After flash it again.
And clk thks if i helpd u
1. Flash stock ROM via Odin.
2. Once your device boots up, root your phone using Shaaan's method (you'll see that thread in this phone's section).
3. Copy the boot.img file from the ROM's zip that you want to install into internal or external memory.
4. Install X-plore file manager and install Universal Kernel Flasher.
5. Open UKF, grant root access. You have to choose the file that you have copied in the above step. Use X-plore to choose that file. There appears some option of extension or something when you open Xplore while choosing the file. Just untick it and choose the boot.img file.
6. Once done, reboot your phone into recovery mode. Most probably it will boot into TWRP recovery.
7. Flash the ROM.
Hope this will help.