Related
hi ive searched for a few hours and tried so many different sequences her eon the forums and for some reason i cant get odin3 1.78 to recognize my captivate... otherwise i would have an awesome Cyanogenmod 7 on it.
i rooted it and installed clockwork from the thread "how to install roms" under the dev threads (the big sticky) then attempted to install a custom rom through clockwork and it failed. now my original rom is messed up. i can load into it but android.phone continuously closes...i cant get odin to see my phone thus i cant reflash the original firmware....
yes i have drivers installed.
yes i have the AIO toolbox.
now for some reason i cannot get Odin to recognize my phone AT ALL (download/recovery/loaded). ive literally tried everything i can think of and to be honest i hope someone here can make me look stupid and help me fix it . ive flashed roms before back in the day with my tilt and cliq. but ive been out of the game for a very long time and lemme tell you im completely lost feeling.
im on windows 7 ultimate x86 fully updated.
ill be glad to donate a little bit for some success on just getting odin to recognize because i have everything. its just that stopping me..
in the meantime my phone is just useless
It might be problems with usb port. Try different ports and/or a totally different computer. Make sure you have drivers according to your computer (32-bit /64). I don't really know why it isn't working.
im sure if he got cwm copied to the phone the USB works...
i have never heard of odin3 1.78
only 1.0 1.3 1.5 1.7 1.81 and 1.82
and some odins only work with some phones..
did this odin ever work for you? or never?
try this one...
no i used my laptop MicroSD then transfered into my root folder of my phone.
ive tried it on 4 computers in my house so far all windows 7 32 bit.
installed the drivers from the AIO and even KIE after seeing no results. ive tried different ports as well and thats the exact odin im using ;(
i also attempted XP compatability mode seeing on another thread windows XP worked for another user in a somewhat situation so im debating whether or not to dual boot XP just to fix my phone lol
so your computer doesnt even see it when you mount usb to copy files? not just odin? did it ever work?
i run windows 7 64 bit no probs.
EDIT... i just re-read your first post....
ODIN ONLY sees the phone in download mode. ONLY
no it doesnt see it at all i think im goin to uninstall drivers and reboot.
now it makes the sound that windows found it but i cant access it or visually see it as a mass storage device even when i specify the settings (disabling debug/enabling mass storage) and under download mode it just doesnt see it at all.
i think im going to get organized and correclty reinstall anything i might think may be an issue
also installing xp on a virtual box on my linux machine to my right
virtual machines and odin dont mix well
with linux use heimdall instead of odin. but the machine still needs to see the device.
and try the drivers from samsung.
USE THE ORIGINAL SAMSUNG CABLE!!!!!!!
some cheap cables, like the one for my bluetooth headset are power only usb cables. the other 2 data pins dont connect end to end!!!!!!!!
ahh maybe thats the problem, i happened to pick up my captivate from someone on criraglist just yesterday and it was just phone and charger. how can i tell if i have an original or not? and yea i tried the drivers from samsung for the galaxy S as well. i was so irritated earlier lol i took a break and came back to it
if windows doesnt beep when pluggin in, then the cable is probably no good...
or try the cable with another phone/ usb hard drive / some data device that takes that input....? or go to radio hack and pick up a new cable. if that doesnt work return it to the hack for your$$ back.. if it does work its worth the 15-20$...
or maybe the phone has a dead usb port... that has happened to some people
okay i found a cord that gives me "usb device not recognized" when im loaded into my phone fully and select mass storage. this is after i installed the samsung driver exe 32 bit for my 32 bit windows 7.
looks like windows 7 attempts to install drivers for "mass storage device" and it fails.
my windows will fail on phone boot a few times because the phone cycles thru different modes.. adb and download mode work on different drivers...
remember to mount to see sd card on pc...
but at least you are getting something now... maybe now is the time to try other pcs..
just throwing out some ideas its getting late.... lol
lol yea thanks man ill reinstall android sdk and java se and see if i can get the adb to be seen and try different drivers for now. thanks for helping me ill donate to you in the end even if we cant get it but man my phone is wacked, all the services are force cosing on it. its so useless right now
ConnectionStatus: FailedEnumeration
Current Config Value: 0x00 -> Device Bus Speed: Low
Device Address: 0x00
Open Pipes: 0
*!*ERROR: No open pipes!
===>Device Descriptor<===
*!*ERROR: bLength of 0 incorrect, should be 18
bLength: 0x00
bDescriptorType: 0x00
bcdUSB: 0x0000
bDeviceClass: 0x00
*!*ERROR: Device enumeration failure
thats what im getting in every port on my laptop.
okay man i got it.. i rebooted my pc after uninstalling EVERYTHING (java sdk,eclipse, android sdk, AIO Captivate toolbox, all drivers known to man that dealt with the phone) then logged back in, i downloaded and loaded up UVCView.x86 and tried my phone on every single usb port on my laptop while disconnecting ANY other device thats including my mouse and for some reason my captivate only worked on 1 usb port that was on the side of my laptop (left side) and would only make a (ding dong) sound if my external was detached from my laptop (weird) but wouldnt install drivers still. reinstalled the set of drivers needed and installed AIO captivate toolbox, nothing happened. so i put my phone in download mode and i went into the Compatibility options for the AIO toolbox and set to run as windows xp SP3 + checkboxed run in 256 color, Disable visual themes, Disable desktop composition, Disable scaling on high DPI settings and run as Administrator Then doubled clicked/loaded it up. sure looked like utter crap but my phone was seen by windows and sure enough it had 2 drivers it installed. i went into flash to stock and COM 3 came right up i cried with happiness and i flashed faster than my eyes blink while on a cup of sugar. then i went ahead and tested the com 3 detectability under Odin (i set odin with the EXACT same compatibility mode settings as the AIO - i used odin by itself just for testing) and COM 3 was instantly seen. after flashing to stock and making sure eveyrthing was okay, i went ahead and installed the speedmod kernel and yet again windows 7 x86 recgonized the device and it installed about 7 different drivers! i should be okay from here im not totally noobed feeling now.
Thanks for stickin by my side for the information and support TRusselo ill donate to you for that.
PS : i think im going to research for a week or two on getting what i ned for my linux box in the near future lol
congrats!!!!
yep yep, got cyanogenmod 7 running great, sure is a battery killer though, seriously im afraid of leaving the house with this lmao. my next paycheck be sure to see a donate from dahrat
Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.
rahbert said:
Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.
Click to expand...
Click to collapse
Have you tried with a different USB cable?
No because i connected succesfully my friends galaxy fit with it, so the cable is not the problem.
thry manualy installing galaxy s drivers on pc?
Uninstall and reinstall the drivers.
Try different drivers.
Make sure you're using a Samsung wrong with the Samsung drivers.
Use a different PC.
Keep trying!
I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.
rahbert said:
I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.
Click to expand...
Click to collapse
To try using different drivers you would need to uninstall the current driver.
And just to be sure, you didn't flash to CM7/MIUI recently, not realizing Samsung drivers won't recognize your phone anymore, right? Nexus S drivers for those ROMs.
Its on the original ROM i think. Recently bought it second hand, 1 year old.
I couldn't find different drivers...except 32 bit and 64bit, but they all are the same version. Maybe post a link or something. Mine are 1.4.4.
Firmware version: 2.3.3
Baseband version i9000XXJVO
Kernel Version: 2.6.35.7-i9000xwjvh - CL184813 [email protected] #Dark_core_2.4 Mon May 16 15:02:38 EEST 2011
Build Number: DarkyRom JVH v10.1
SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!
rahbert said:
SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!
Click to expand...
Click to collapse
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.
upichie said:
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.
Click to expand...
Click to collapse
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx
rahbert said:
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1347899
upichie said:
http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.
rahbert said:
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.
Click to expand...
Click to collapse
Throw it against the wall then. You ask us for help, disregard all of it, and then update us on what the service desk told you. If you will only listen to them, then don't ask us, kay? Appreciated.
Hi, there.
Actully, the rahbert's question is not bad. How can i use Mobile Odin if i can't root the device?
Or, how can I root without PC? Is it possible? I have exactly the same problem:
Nexus S (I9020), ICS 4.0.4(stock). When I plug the device: the error is reported(Code 43).
Should I try wipe data/factory reset? I really don't want to do this, because there is another good question: How can I fully backup my data(Titanium and so on) without root access? Can you suggest me something? Thanks.
Herman76 said:
Have you tried with a different USB cable?
Click to expand...
Click to collapse
Changing the USB cable worked for me. Thanks!!
I just wanted to relay my experience for anyone who might run across the same problem. There are so many solutions (some good, some bad) that I thought I'd try and help someone else out that was in one of these situations. Keep in mind, the solutions are all here at XDA, I just had to dig and try a few things.
This Captivate was on a Ginger Clone rom (2.2) from about a year ago and I wanted to go to Cyanogenmod. I personally run Cyanogenmod7 (181), and was trying to replicate that.
[Boot-Loop]
I Attempted to clear caches and go straight to Cyanogenmod. This may have been an inexperienced guess that I might be able to do this, but I know a few other folks that manage to do this. I ended up in a boot loop
[Getting to Download mode]
Can be frustrating, but seems to be if you have the usb unplugged, battery out, sim out, put the sim in, battery in, usb in (phone will turn on, so you have to move fairly quickly) and then hit the up and down volume buttons it will go into download mode.
[Go back to Factory]
I tried using the Odin 1 click solution. I believe there are more than 1 versions of this, but it would just get stuck at "Do not turn off target". I decided to try something else. The Java based Hemidal 1.3 aka "SamsungCaptivate-SGHi897-UCKB2-Rooted-One-Click.jar" seems like it is very well written and very easy. It has you update a driver in the mix and it works fantastically.
[Now I'm at Stock 2.2, rooted]
Need to turn on USB debugging, and I was expecting to be able to put
on the rom manager by copying over a file, naming it update.zip but it won't run due to some signing restriction.
[Unable to run any scripts or update.zip]
http://forum.xda-developers.com/showthread.php?t=833423
Basically, you need to turn off signing
[Went off the tracks, bricked the phone]
I decided I would try and apply the Cyanogenmod rom a different way. I went to their wiki and tried to use their Hemidal 1.1.1 update suite and script. I ended up with a brick. I didn't panic, I used the below url and it worked to get me back into download mode. I then used the previously successful Hemidal one click to fix it.
http://www.traemcneely.com/2011/05/...e-possibly-vibrant-kernel-error-black-screen/
I went back to the 3e recovery installer, ran that script, it worked and let me run unsigned code, I installed rom manager via update.zip, and from rom manager I was able to apply Cyanodenmod 7-v181 and then the Google apps and I was happy. Took about 2 1/2 hours to go through all that. Kind-of a pain... happy now.
Rich
Wish I had your kind of luck
I have a Captivate that isn't "bricked" per say but when I plug it into my computer when it's in download mode I only ever get "unknown device". Forcing a driver install causes a code 10 which makes it unusable as well. I have tried 4 different cables and 3 different computers now and tried all of the USB ports on each of the computers I tried at and always get unknown device even with the correct drivers installed. The 3 button trick doesn't work to put it in download mode but using a jig does. I have tried every operating system combo as well heimdall in OSX and Linux says no device connected, and in Windows 7 32 bit and 64 bit I get the unknown device error, also tried Windows XP and get the same error. I have tried 4 different usb cables now as well in each situation with the same unkown device/no device connected error (2 motorola cables, 1 samsung oem cable, and one no-name cable). I was going to gift this to my Dad because he's been missing Android since he gave his HD2 away and went back to a Blackberry.
Ok guys I'm a noob around here. I've had my P990 for about 7 months and I'm ready to throw it against the wall:crying: I've been searching for info on this type of fault and I read that it happens pretty often. I really didn't have the need to plug my phone to my computer, so I never did, until about two days ago I decided I was bored with my stock phone and decided to install the latest version of android, so I downloaded the LG IV suite. Installed it, I'm following the directions, connect my phone and bam, NOTHING I kept getting an error on the LG suite, can't find phone, check connection and try again. At this time I also notices that my phone was charging through the USB cable. So my basic troubleshooting techniques kicked in, and performed the basic steps:
-Made sure Mass storage only box is checked
-Switched USB cable
-Re-installed the driver
-Downloaded the latest driver from LG website
-Downloaded drivers recommended by XDA
-Tried two other computers with two different OS
So none of this worked:crying:
After monkeying around for a couple of hours with my phone, I read somewhere on this forum to take out the battery, connect to USB cable to your computer, hold down the power and volume down buttons at the same time, this would put my phone in some mode, I don't know what that mode is, but decided to do it. My phone powers up, then I see the green android little man with a white box and an arrow coming out of the box. Ok, finish doing it's thing and then it reboots. I go into my phone and find that everything has been erased and the phone was back to it's original state when I received it over the mail.
Since my phone is back to stock, I decided to go the root road. Downloaded SuperOneClick, installed it connect my phone via USB and I'm back to step one. I get nothing!!! So then I decide to go the root flash road. So I downloaded the z4root adk file and put in the flash, pop the flash in my phone and nothing. Can't see my flash card on my phone (never used an SD card on my phone and decided to buy one for this instance). Kept reading on-line and found that I need a file manager application, so I installed Linda Manager on phone, opened the z4root adk file and installed on my phone. So now I'm getting very excited and I'm giggling like a school girl because I'm starting to see light at the end of the tunnel. So I run the z4root application and go with permanent selection, the application start the root, then BAMMMMMMM. The application just stops and my phone takes me to my home page. I decide to restart the z4root application and I can't get the app to run. I re-booted my phone, restarted the app, and keep getting stuck. The app stops and I can't never successfully get a root. I'm out of ideas, I've going at it with my phone for two day and reading on the net.
The two thing I want to accomplish is to be able to use my phone via the USB cable and to root my phone. Can you guys point me in the right direction. At this point I'm willing to try anything on my phone since everything got erased.
by the way here's is what stock I'm running on my phone:
Android version: 2.2.2
Baseband version: 1035.21_20110725
Kernel version: 2.6.32.9
Built number: FRG83G
LGE version: LGP990-V10d
My computer is running Windows Vista, I also tried a Window 7 and a Windows XP computer and still nothing for the USB.
I would appreciate any help guys, throw me a bone over here:laugh:
Same thing happened to my friend. No USB detection (the phone was charging through usb but nothing showed up on the pc). He tried everything then he called me (I have o2x too) , i tried everything you did too. His pc detected my o2x , but when he connected his (on the same cable) ... nothing .
Finally he remembered the phone had warranty and took it to tech suppport. First they reflashed it , but when he tried it home ... nothing . He took it to support again , they kept it for about 10 days and told him they had to change the motherboard.
Phone works now.
He was on stock froyo too , Vodafone Romania version.
Sent from my Optimus 2X using Tapatalk
On another threat I found more similar problems.
kohos said:
Sorry for the bump, but I got some update.
when dialing the above mentioned 1809#*990# in the Port menu, switching from default AP USB to AP/CP UART gave me life signs.
After switching to AP UART I linked the Unknown device driver to lgusbdiag.inf located in C:/ProgramFiles(x86)/LG United Mobile Driver.
Suddenly it started installing it and is now recognized as: LGE Platform Android USB Device.
Once disconnected I lose USB again, I'm able to recreate the first steps though even in default AP USB mode by now.
The only thing I need USB for is for flashing a custom recovery but the only thing I don't have is ADB somehow : / Clockwork telling me: device not found.
Any help on this one?
Click to expand...
Click to collapse
I tried this, but unfortunately it didn't work, I can't even see my device under Manage/Device Manager.
brymarti said:
i tried that but it only charge
theres a weird thing in my cp when i switch to cp uart my o2x says it charging even i dont connect it to my pc or charge it
Click to expand...
Click to collapse
I get the exact same symptom, as soon as I change from AP USB to AP/CP UART, my battery icon on my phone goes to charging, without the being plugged in
Well I'm pretty tired of monkeying around with this phone, but I really like phone and really don't want to change model. So I decided to order a brand new one:laugh:
I should be getting it within the next two week, hopefully that doesn't give me the same problem
I'll keep you guys updated.
Help??
A very good friend of us noobs toying with our O2x's are Paul O'Brien.
I could not get any other flashing tool to root my O2X other than his. Here is link to his guide:
modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/#entry1645587
He also has the tool to completely restore your O2X back to factory standards, and in the O2X forum here you will find all the different stock roms, you need to get your phone back to these factory standards and restore your warranty.
After you flashed your phone and get ready to try all the marvellous ROMs, waiting on the other side, I can only recommend to purchase the PRO version of Clock Work Mod, it really brings out the fun in rooting your phone.
Seeing your description of your troubles, I think you have softwareproblems, more than hardware problems, so a complete flash and maybe restore, will likely solve many if not all of your problems.
Best regards
Mike
And dont forget to show your support to the developers, they do a marvellous job for us!!!
Thanks mike,
I followed the link you provided and did a lot of reading. So decided to try that method. No luck with that, my computer doesn't detect APX mode while holding down both volume keys. I tried it like 10 times every time holding the keys at different intervals. I even tried it on my wife's laptop running windows 7, didn't work either.
I did find a lot of good info on the link you posted.
Thanks, just waiting on my new O2x to come in the mail.
Possible solution
Some days ago, I also had a problem connecting my LG Optimus 2X to my PC (Windows 7).
I solved my problem using this instructions I found in the G2X forum, by conspirator_boff user (http://forum.xda-developers.com/showpost.php?p=15899923&postcount=10)
Similar issue. This worked for me on Win 7.
Uninstall the LG Drivers and reinstall the G2x 2.2 package from LG.COM /us/support/mc-support/mobile-phone-support.jsp (I can't post links)
Plug the phone in and go to Device Manager. There should be a USB Composite Device that is not properly installed. Right click it and select Update Driver Software.
Select 'Browse my computer', then 'Let me pick'. Choose have disk, and browse to where the LG Drivers are installed. Likely C:\Program Files\LG Electronics\LG United Mobile Driver\ and select lgbus9x.inf.
Then pick LGE Android Platform Composite USB Device from the list of drivers. Should be the top option. Hit next.
I let it sit for a minute while the drivers installed. Some things registered in device manager right away, the LGE USB Modem for one. But, the drives didn't. Unplugged the phone, plugged it back in, and the drives popped up under Portable Devices.
Click to expand...
Click to collapse
I think it's an issue from the newest LG Drivers because when I first tried to connect it a year ago I had no problems.
Hope it helps.
hurtads said:
Thanks mike,
I followed the link you provided and did a lot of reading. So decided to try that method. No luck with that, my computer doesn't detect APX mode while holding down both volume keys. I tried it like 10 times every time holding the keys at different intervals. I even tried it on my wife's laptop running windows 7, didn't work either.
I did find a lot of good info on the link you posted.
Thanks, just waiting on my new O2x to come in the mail.
Click to expand...
Click to collapse
Good luck and I hope your new phone will behave properly.
Remember Paul also has tools for bringing your phone back to factory standards, so you keep your warranty.:good:
Enough said, good luck and remember our O2X is probably one of the easiest phones to try out different ROMs at and I have never enjoyed this little gadget as much as after I flashed it!!:
BR
Mike
Fixed
Sorry guys for the late update.
I received my new P990 about two weeks ago. As soon I pluged the phone into my computer it started installing the drivers and I was able to use my phone via the USB cable. Another thing I noticed, on this new phone when I pluged the USB cable, I noticed it went in nice and firm, on my old phone the cable seemed to be a little loose. Anyway it was definately a hardware issue with my phone. I'm pretty happy with 2x.
Ever since I built my new PC running Windows 10 64 bit I can't get Odin to work. The phone connects in download mode but will not flash, it just fails with no error other than fail. I have a ASUS ROG STRIX B350-F mainboard with a AMD Ryzen 3 cpu. I know it isn't a windows issue because I can run Odin just fine on the other three Intel PC's running Windows 10 here and the bios. drivers and OS are all current. Oden is 3.13.1. I'm thinking it might be this mainboard but I would like some input before I purchase another. The thing that is puzzling me is the computer runs everything else but Odin just fine and that makes me think it might be a compatibility issue with the Ryzen cpu in general. Hopefully someone here can shed some light on this.
Misterxtc said:
Ever since I built my new PC running Windows 10 64 bit I can't get Odin to work. The phone connects in download mode but will not flash, it just fails with no error other than fail. I have a ASUS ROG STRIX B350-F mainboard with a AMD Ryzen 3 cpu. I know it isn't a windows issue because I can run Odin just fine on the other three Intel PC's running Windows 10 here and the bios. drivers and OS are all current. Oden is 3.13.1. I'm thinking it might be this mainboard but I would like some input before I purchase another. The thing that is puzzling me is the computer runs everything else but Odin just fine and that makes me think it might be a compatibility issue with the Ryzen cpu in general. Hopefully someone here can shed some light on this.
Click to expand...
Click to collapse
Have you tried a different USB port (in the back of your pc) and/or cable?
sefrcoko said:
Have you tried a different USB port (in the back of your pc) and/or cable?
Click to expand...
Click to collapse
Yes, stock cable, aftermarket one and I've tried all the ports, USB 2.0, 3.0 and 3.1. No hubs either, just strait to the computer. I've been trying different things for about a month to no avail. Even Smart Switch works fine.
Misterxtc said:
Yes, stock cable, aftermarket one and I've tried all the ports, USB 2.0, 3.0 and 3.1. No hubs either, just strait to the computer. I've been trying different things for about a month to no avail. Even Smart Switch works fine.
Click to expand...
Click to collapse
Ok that's odd I have the exact same issue on Intel board. My laptop cost almost 3k pounds so it's one of the best on the market.
Yesterday I got the new Odin and it don't even show my phone as connected which is wired.
I have been using this phone before with this laptop so I am thinking it's a flawed version of Odin going around.
I haven't yet tried an older version of Odin but it use to work in the past so I can't see why it should fail now but have you tried a previous version of Odin yet ?
Edit :
I use my phone and laptop daily with file transfers and I use PDAnet+ which I have used for years and they all work fine no issues as well so it's most likely Odin version.
I remember wired Chinese writing poping up when I first start the new Odin 3.13.1 so it might be a bugged leaked version.
Do you have the same Chinese text pop up on start ?
Zionator said:
Ok that's odd I have the exact same issue on Intel board. My laptop cost almost 3k pounds so it's one of the best on the market.
Yesterday I got the new Odin and it don't even show my phone as connected which is wired.
I have been using this phone before with this laptop so I am thinking it's a flawed version of Odin going around.
I haven't yet tried an older version of Odin but it use to work in the past so I can't see why it should fail now but have you tried a previous version of Odin yet ?
Edit :
I use my phone and laptop daily with file transfers and I use PDAnet+ which I have used for years and they all work fine no issues as well so it's most likely Odin version.
I remember wired Chinese writing poping up when I first start the new Odin 3.13.1 so it might be a bugged leaked version.
Do you have the same Chinese text pop up on start ?
Click to expand...
Click to collapse
I thought the Chinese text was weird too. I did just try to Odin back to 7.1 with version 3.12.5 and still get the same error. At least it's not confined to AMD I guess.
EDIT: It doesn't even verify the files after the md5 check just before flashing, it just fails.
View attachment 4471540
Zionator said:
Ok that's odd I have the exact same issue on Intel board. My laptop cost almost 3k pounds so it's one of the best on the market.
Yesterday I got the new Odin and it don't even show my phone as connected which is wired.
I have been using this phone before with this laptop so I am thinking it's a flawed version of Odin going around.
I haven't yet tried an older version of Odin but it use to work in the past so I can't see why it should fail now but have you tried a previous version of Odin yet ?
Edit :
I use my phone and laptop daily with file transfers and I use PDAnet+ which I have used for years and they all work fine no issues as well so it's most likely Odin version.
I remember wired Chinese writing poping up when I first start the new Odin 3.13.1 so it might be a bugged leaked version.
Do you have the same Chinese text pop up on start ?
Click to expand...
Click to collapse
Firstly,
i have used the Odin 3.13.1 with the " Chinese writing" pop up. a few times now and again to flash Oreo. No issues, works fine for me.
Secondly,
Just a thought / test.?
Have you tried connecting
to the phone ADB .
If you run ADB cmd "ADB devices"
it will tell you " listed devices etc"
My point is it pc Win 10 recognizes that it sees a Android device, surely the correct version of Odin should also.? If not then you can accept that why Odin
does not see your devices.?
I might be off course but......sorry if but, it's
just a thought.?
Misterxtc said:
I thought the Chinese text was weird too. I did just try to Odin back to 7.1 with version 3.12.5 and still get the same error. At least it's not confined to AMD I guess.
EDIT: It doesn't even verify the files after the md5 check just before flashing, it just fails.
Click to expand...
Click to collapse
Well at least your phone is seen by the software. I don't even get the little green box to show my phone is connected.
Only sign I get from connecting to pc is the sound of connection and the data transfer are available as I can see and surf my sd cards on pc side.
I am a bit busy lately so I'll mess about with it when I get time.
I tried flashing Oreo via Odin, it just didn't work. I saw there was an update (not oreo) for my phone, Ive only just got it back after a month but, when I tried after the ota update Odin worked for me.
Maybe that will resolve ypur issue?
Zionator said:
Well at least your phone is seen by the software. I don't even get the little green box to show my phone is connected.
Only sign I get from connecting to pc is the sound of connection and the data transfer are available as I can see and surf my sd cards on pc side.
I am a bit busy lately so I'll mess about with it when I get time.
Click to expand...
Click to collapse
stonedpsycho said:
I tried flashing Oreo via Odin, it just didn't work. I saw there was an update (not oreo) for my phone, Ive only just got it back after a month but, when I tried after the ota update Odin worked for me.
Maybe that will resolve ypur issue?
Click to expand...
Click to collapse
I ordered a different brand mainboard with a different chipset that will be here tomorrow. Hopefully it fixes the issue. If it dose I'll try to RMA this ASUS board and then sell it. Things were intermittent with the Pixel 2XL I had at the time I built this PC but I brushed it off as a problem with the phone. We will see what happens tomorrow.
Hey guys....i had the "failed" message too and fixed it by changing the com port number to com port 1 in my experience i've seen times where phone software will only work on "low" com port numbers....Try that...the basics of the steps are to open device manager on pc with phone connected in download mode (to see the modem device to change its com port), in device manager locate the modem and click Advanced tab then Advanced Port Settings and change the port number to 1 or 2.
After that reboot both devices Pc and reboot phone to download mode.
Has worked for me with Note 7 and Note 8 when faced with same error in Odin.
Sent from my God Mode 8
louforgiveno said:
Hey guys....i had the "failed" message too and fixed it by changing the com port number to com port 1 in my experience i've seen times where phone software will only work on "low" com port numbers....Try that...the basics of the steps are to open device manager on pc with phone connected in download mode (to see the modem device to change its com port), in device manager locate the modem and click Advanced tab then Advanced Port Settings and change the port number to 1 or 2.
After that reboot both devices Pc and reboot phone to download mode.
Has worked for me with Note 7 and Note 8 when faced with same error in Odin.
Sent from my God Mode 8
Click to expand...
Click to collapse
Thanks for the the tip. I was able to change the port but it still fails. I'm out of ideas at this point. If I do need to use Odin my wife's laptop works fine for now.
I wonder if it's got something to do with one of the bios settings...
Misterxtc said:
Thanks for the the tip. I was able to change the port but it still fails. I'm out of ideas at this point. If I do need to use Odin my wife's laptop works fine for now.
Click to expand...
Click to collapse
Did you restart both devices too?
If so, sorry it didn't work...hoped it would help. Which port # did you select btw?
Sent from my God Mode 8
Zionator said:
Well at least your phone is seen by the software. I don't even get the little green box to show my phone is connected.
Only sign I get from connecting to pc is the sound of connection and the data transfer are available as I can see and surf my sd cards on pc side.
I am a bit busy lately so I'll mess about with it when I get time.
Click to expand...
Click to collapse
sefrcoko said:
I wonder if it's got something to do with one of the bios settings...
Click to expand...
Click to collapse
louforgiveno said:
Did you restart both devices too?
If so, sorry it didn't work...hoped it would help. Which port # did you select btw?
Sent from my God Mode 8
Click to expand...
Click to collapse
First off I was wrong, it was not my mainboard. I did end up replacing it yesterday to no avail so now the new board is on it's way back to Newegg . I tried again this morning with my PC after flashing back to 7.1 and back to Oreo via the laptop. The first time failed with the same cable and files from the laptop. The second time it finally worked on my PC. The thing I tried different was using the USB 3.1 port with a USB 3.0 to USB C from my old Pixel phone. Download mode ended up on com 17 but everything flashed good. The only thing I really did different was try the last cable I had. I already tried the same port along with the many others on this machine with every other cable including the original besides the one that now works. Go figure . Anyway thank you all for the help, I do appreciate it.
Misterxtc said:
First off I was wrong, it was not my mainboard. I did end up replacing it yesterday to no avail so now the new board is on it's way back to Newegg . I tried again this morning with my PC after flashing back to 7.1 and back to Oreo via the laptop. The first time failed with the same cable and files from the laptop. The second time it finally worked on my PC. The thing I tried different was using the USB 3.1 port with a USB 3.0 to USB C from my old Pixel phone. Download mode ended up on com 17 but everything flashed good. The only thing I really did different was try the last cable I had. I already tried the same port along with the many others on this machine with every other cable including the original besides the one that now works. Go figure . Anyway thank you all for the help, I do appreciate it.
Click to expand...
Click to collapse
Hot damn I didn't have the phone drivers installed apparently LMAO.
After installing the drivers it worked fine. :silly:
Zionator said:
Hot damn I didn't have the phone drivers installed apparently LMAO.
After installing the drivers it worked fine. :silly:
Click to expand...
Click to collapse
That's too funny. I'm glad it worked out for you too and it didn't cost you $40. It's all good.
I have that problem with ryzen cpu.