Database Develop

[Q] PC Not Recognizing Cappy

I'll try to keep this as short as possible. After installing Perception 9.5 on my phone my PCs started to fail to recognize the device. I was never able to get it to work with Odin but I was able to connect it to install Perception 10.2 hoping that might fix the issue (10.2 goes back to 897 whereas 9.5 was based off some Samsung 959 ROM). Unfortunately, it did not and I can't connect the device to any of the three PCs I have.
Either nothing happens or the PC says "usb device not recognized". Things I have tried:
Switched usb debugging on and off
Switched from kies to mass storage to media player
Removed and reinstalled drivers on all 3 PCs (2 32-bit Vista, 1 64-bit Win7). The drivers used were the ones in the FAQ thread.
Tried a different micro usb cable
I'm at a loss as to what else to try. I never had this issue before trying to flash Odin with Perception 9.5 on my device. Any suggestions?

Have you tried a different USB port on your computer? I was using one on the front of my computer for months and then lately it wouldn't connect and I went through the things you did and nothing worked. I am now using a USB port from the back of my computer and it is working fine. If you have wifi you could also look into an app called SwiFTP. It will allow you to transfer files between your phone and computer using your wifi instead of USB cable. Good luck, hope you get it figured out.

Tman42 said:
Have you tried a different USB port on your computer? I was using one on the front of my computer for months and then lately it wouldn't connect and I went through the things you did and nothing worked. I am now using a USB port from the back of my computer and it is working fine. If you have wifi you could also look into an app called SwiFTP. It will allow you to transfer files between your phone and computer using your wifi instead of USB cable. Good luck, hope you get it figured out.
Click to expand...
Click to collapse
Yep, I have tried a total of 14 usb ports on 3 PCs, lol. I have Doubletwist and Dropbox so I'm not worried about moving files and whatnot, but I do like testing out other ROMs so I need to be able to connect in order to use Odin. I also want to sell this phone soon and pick up an Inspire so I kind of need to get it back to stock.

Update: I tried installing the Vibrant drivers (since that's what Perception 9.5 was based off of) and I did a hard reset of the phone. PC is still unable to recognize the device. Is there a zip file out there that would allow me to revert back to stock?

There its the jh7 ota that design gears put out a while back, but you are taking a risk flashing anything without knowing you can use odin.
If you are going to try it, make sure you disable lag fix first

did u try adb?
did u try different USB cable?
can u get it into download mode?

tzabka said:
did u try adb?
did u try different USB cable?
can u get it into download mode?
Click to expand...
Click to collapse
Do not know what ADB is, I'll do some homework. Tried a different cable. Can get it into download mode.
@mcord, thank you, I'll google that. I'm not sure what else to try.

http://www.ponack.net/designgears/JH7_OTA.zip

mcord11758 said:
http://www.ponack.net/designgears/JH7_OTA.zip
Click to expand...
Click to collapse
Thank you, before I try that I want to go down the ADB route. Is this what I'm looking for or is there something more updated?
http://forum.xda-developers.com/showthread.php?t=502010

That is what you are looking for but I am not sure it will do you any good if your pc does not recognize your phone

i m oso having same problem. it charge but just won't connect to my pc. tried all but fail. same worries

Phone not recognized by pc

Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App

donk232 said:
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989

Make sure you are using the oem usb cable. I had the same problem, changed cables and it worked

some cheap cables are for charging ... bt headsets and other stuff the data cables dont connect, its just for power.

koreancanuck said:
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.

donks232 said:
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
Click to expand...
Click to collapse
You gotta make sure that your usb port is directly connected to your motherboard (usually back of your computer).

same usb port that has always worked. ive tried them all by now anyway

now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.

donks232 said:
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
Click to expand...
Click to collapse
lolol
Duno what happened but I'm glad it worked out for you

I'm having the same problem with my captivate after flashing REDROM. It won't recognize it if I have USB debugging turned on...

i have a theory... were you on a GB or other i9000 based rom/kernel???

well, im still having a problem getting my computer to recognize the phone, i have to mess with it for a a while to get it to work. i really want to flash anew 2.3.3 rom but without being able to get everything working right im stuck in 2.1
is this a problem with my cord or the connection on my phone? or something weird with my phone after flashing it a lot. its currently back to odin stock, i have been trying to master clear it with no luck

TRusselo said:
i have a theory... were you on a GB or other i9000 based rom/kernel???
Click to expand...
Click to collapse
continiuum miui and cyanogen mod are the only things ive tried to flash

well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB

Guys, this problem while connecting to the PC body is stupidly charging .... Even in the download mode Odin does not see a body that could be? Connect other Cappy-all OK.

donks232 said:
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Click to expand...
Click to collapse
it must be a powered usb hub, on my buddies laptop only 1 out of 4 usb ports saw his phone.
if you can get into download mode you arent bricked.
try installing i9000 drivers, or try another computer.

I came up with this a while back. Could very well be the same issue.
Let me start by saying I'm flash happy, and everyone that knows me personally, tells me to just quit jacking with my phone. NOT A CHANCE! I'm on my 3rd Cappy and shouldn't have ever exchange it again. I only had to in the beginning, because I was a newbie and had not know enough, but to get me in trouble.
I presume that this should work on all Windows OS's. I personally am running Vista Enterprise x86.
My symptoms:
Plug in phone to the usb and it there was about a 15% chance off being able to mount to usb, and Windows recognizing as a mass storage device. I tried un-installing drivers and re-installing and it would work some of the time, until the point came when parts of the driver install would fail. Then to the point when it was just completely unrecognizable. I thought I had it fixed because it seemed intermittent. In the middle of flashing to stock, something interrupted communication between the pc and my phone. Restarted the phone and attempted the flash again. Got a little farther and froze again. I had to use another pc that I had never connected my phone to before and I was able to use my jig to trigger download mode, because no buttons combinations would allow it into download mode.
This got me thinking that it was specific to my pc and not my cable or my phone.
My resolution:
I went straight to the registry and went to find. I deleted every entry that came up for "i897" and "i9000" excluding what was listed in the system volume information, as I didn't have permissions to remove any keys. I didn't keep count, but I probably deleted 300-400 registry keys that pointed to my phone. It seems as if with each developers rom that I had flashed, there was an entry for a different device. Don't quote me on that, because it is just my personal consensus. I also un-installed the samsung drivers, the unknown device driver, kies software, and anything associated with samsung. I noticed that next to all of the i9000 instances, the hex key for me started with 1000ee. So I also searched for the first part of that key trying to ensure that all instances of the device. Lastly, I deleted the samsung folder from program files.
I installed the samsung drivers package commonly listed in all of the other threads for x86 operating systems. I plugged in my phone and watched as each and every driver installed successfully. Keep in mind different drivers are installed depending on if you have usb debugging on/off, and the options for if the preferences on you phone are set to media, storage, or kies. I have multiple usb ports, however testing has shown me that, for me and my setup, I can plug into the port that I used when installing the drivers the final time, I am able to connect consistently. Earlier today, I tried to plug into a different usb port and it was an unknown device. I am led to believe, this is because I didn't un-install the unknown device on this particular port.
If you intend to work in the registry, please remember to always back it up first. You can always restore.
Hopefully my findings can help you as they did me. Happy flashing and I would like to thank the community for the dedication to assisting each other and the developers, for making flashing, better than crack cocaine. Flashing rom's doesn't make you twitch near as much as a crackhead.

Well since you can't use your phone you should sell it to me
Sent from my GT-I9000 using XDA Premium App

I didn't even install drivers, ubuntu got them for me
Sent from my SGH-I897 using XDA Premium App

Problem making pc to recognize phone.

Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.

rahbert said:
Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.
Click to expand...
Click to collapse
Have you tried with a different USB cable?

No because i connected succesfully my friends galaxy fit with it, so the cable is not the problem.

thry manualy installing galaxy s drivers on pc?

Uninstall and reinstall the drivers.
Try different drivers.
Make sure you're using a Samsung wrong with the Samsung drivers.
Use a different PC.
Keep trying!

I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.

rahbert said:
I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.
Click to expand...
Click to collapse
To try using different drivers you would need to uninstall the current driver.
And just to be sure, you didn't flash to CM7/MIUI recently, not realizing Samsung drivers won't recognize your phone anymore, right? Nexus S drivers for those ROMs.

Its on the original ROM i think. Recently bought it second hand, 1 year old.
I couldn't find different drivers...except 32 bit and 64bit, but they all are the same version. Maybe post a link or something. Mine are 1.4.4.
Firmware version: 2.3.3
Baseband version i9000XXJVO
Kernel Version: 2.6.35.7-i9000xwjvh - CL184813 [email protected] #Dark_core_2.4 Mon May 16 15:02:38 EEST 2011
Build Number: DarkyRom JVH v10.1

SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!

rahbert said:
SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!
Click to expand...
Click to collapse
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.

upichie said:
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.
Click to expand...
Click to collapse
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx

rahbert said:
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1347899

upichie said:
http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.

rahbert said:
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.
Click to expand...
Click to collapse
Throw it against the wall then. You ask us for help, disregard all of it, and then update us on what the service desk told you. If you will only listen to them, then don't ask us, kay? Appreciated.

Hi, there.
Actully, the rahbert's question is not bad. How can i use Mobile Odin if i can't root the device?
Or, how can I root without PC? Is it possible? I have exactly the same problem:
Nexus S (I9020), ICS 4.0.4(stock). When I plug the device: the error is reported(Code 43).
Should I try wipe data/factory reset? I really don't want to do this, because there is another good question: How can I fully backup my data(Titanium and so on) without root access? Can you suggest me something? Thanks.

Herman76 said:
Have you tried with a different USB cable?
Click to expand...
Click to collapse
Changing the USB cable worked for me. Thanks!!

Samsung galaxy s 'usb brick'

Hi, to all.
I'm not sure i am the only one who has this problem on i9000,(i suppose not),
in any case i haven't found any thread related for our phone.So i thought it would be a good idea to start one,and if others have same problem, post here, so we can gather as much info we can.And maybe find a solution.
ANY HELP IS VERY APPRECIATED.
From what I've read on forum it's defined as: ''when a phone perfectly works but it is unable to make its usb micro port work in any way''.(Except charging).To precise, i mean make phone visible in download mode or able to enter in download mode,usb drivers install, transferring files to/from computer to internal memory and sdcard.
The only threads i found are for HTC devices,with no clear solution.
User Bejda gently gave me a link on a French forum with a similar problem.
It has alot of interesting info and personal opinions about the problem.
http://galaxys-team.fr/viewtopic.php?f=6&t=20841
Another link is this one referring to a program that can unbrick and make functional the usb port.
http://galaxys-team.fr/viewtopic.php?f=6&t=22257
POSSIBLE SOLUTIONS:
1)GOOGLE DRIVERS (As i use cm7) --Didnt work in my case
2)Other cm7 version or other kernel from CWM --Didnt work in my case
3)Other pc usb port --Didnt work in my case
4)Other pc or format --Didnt work in my case
5)Other usb cable --Didnt work in my case
6)Mobile Odin --Cant use that to put stock firmware as i need to repartition and pit, and these options are disabled.Can they be enabled??
7)Clean Usb port/Check if it is ok --Didnt work in my case
8)Use Jig -- Didn't work either.
9)Use the program from the above forum??
10)Heimdall --Finds uknown device with 0000 ids etc,and fails to install device.Does work.Tried latest version.
11)Tried toggling BT--Didnt work.
12)Having the phone connected to notebook and then turning the notebook on -- Didnt work in my case
12)APPLYING CM9 ICS! -- YES THIS SOLVED MY PROBLEM!!USB DISCS WORKING SO AS ODIN ON DL MODE!!!!!THANK GOD!
Can't think something more..
About my case:
The phone works perfect but i cant manage my pc to 'see' my phone.Charging works.
The 2 discs of the phone
or even odin cant be seen.I tried different pc's,usb ports,usb drivers/controllers,cables,download or not mode,usb debbugging on/off , samsung and google drivers.
Other cm7 versions or kernel versions.Formatting the pc also.Whereas my friends phone on pc works perfectly,mine 8 out of 10 times is not recognised ,or found as uknown device.
Discs (internal and sd) also not shown on my computer.
On 3-4 days of trying i only managed to get it shown for 1 minute(only discs) ,didnt have time to try odin,as it disconnected (without me touching anything).After that it did the same before(not recognized etc).
I also dissembled my phone and i can say usb port seems perfect.
I was thinking if i manage to make odin work i can repartion and (update bootloader????) also put stock firmware/kernel that may fix it ,or not???
Or at least with stock i can try samsung's warranty.
Anyway for now i use My phone Explorer (via wifi) that can access eveything (contacts,sms,calendar,both disks on root folders etc,and its free)
because ftp apks dont work for me.

I ran into the same problem a few weeks ago, tested it all that you write about, but eventually I gave up and sent it to Samsung, they changed the circuit board on the warranty and now it's on its way back from service.
I said I tried to update the phone in Kies and that something went wrong ....
If you have a custom ROM on your phone, see if you can "destroy the software" so that they can not get into the phone and find that you have broken the warranty.

Thanks for your answer.
Well,you were on custom firmware/kernel?
I don't know if this can be done as i am on cm7 and i use a non stock kernel.

if you are on a custom rom you could try odin for mobile to flash a stock rom and send it to samsung (if you are still under waranty) for repairs/checks

gigeaky said:
if you are on a custom rom you could try odin for mobile to flash a stock rom and send it to samsung (if you are still under waranty) for repairs/checks
Click to expand...
Click to collapse
Hi,thanks for the answer.
As i said odin cant be used because phone is not recognised by the pc in any way

For me toggling bluetooth helpt ...

I had same issues, repaired by replacing micro usb port.
Sent from my GT-I9100 using Tapatalk

fobas001 said:
I had same issues, repaired by replacing micro usb port.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
you replaced it alone?
sent it somewhere??
In anycase today arrived my JIG .
Even when i enter in download mode with Jig,i cant make Odin see it in anyway/or install drivers.
Tried also BT toggling as stated,but nothing.

magosmagos said:
you replaced it alone?
sent it somewhere??
In anycase today arrived my JIG .
Even when i enter in download mode with Jig,i cant make Odin see it in anyway/or install drivers.
Tried also BT toggling as stated,but nothing.
Click to expand...
Click to collapse
I did sent to rma, but I have done for my friend, because he was out of warranty, not so difficult if you have proper soldering tools. Well its not cheap to get them, Im working with pc's motherboards, and soldering components is my job.
Sent from my GT-I9100 using Tapatalk

magosmagos said:
Hi,thanks for the answer.
As i said odin cant be used because phone is not recognised by the pc in any way
Click to expand...
Click to collapse
i hope you understood that i was referring to this

i had this problem so many times even with my ex-galaxy spica.
My solution is very weird/unimaginable : One day, my spica remained plugged in my pc portable turned off. When i booted my pc portable,in my bios screen, my phone said it was connected in USB. It was the better day of my life
Precision : my pc portable is very old ( compaq presario R3200 )
From that momment, every USBrick was just matter of time

gigeaky said:
i hope you understood that i was referring to this
Click to expand...
Click to collapse
Thanks,
sorry i read too fast.Problem remains also even with Mobile Odin.
I am on modified kernel and cm7.
If i try to use mobile odin to put stock firmware kernel i will soft brick my phone as i need to repartition and pit,and these options on mobile odin are disabled

oxmoss said:
i had this problem so many times even with my ex-galaxy spica.
My solution is very weird/unimaginable : One day, my spica remained plugged in my pc portable turned off. When i booted my pc portable,in my bios screen, my phone said it was connected in USB. It was the better day of my life
Precision : my pc portable is very old ( compaq presario R3200 )
From that momment, every USBrick was just matter of time
Click to expand...
Click to collapse
I'll try that also with my netbook.

I had a similar problem I was using cm7 latest build at the time. I just flashed CM9 ics build a few days ago now window can see my phone sd card and external sd card I have not tried using it with odin etc yet as was too busy will try it this weekend to see if it is completely fixed.

If you want to drop off cm, you can try mobile Odin....
Sent from tam-tam drum

spamtrash said:
If you want to drop off cm, you can try mobile Odin....
Sent from tam-tam drum
Click to expand...
Click to collapse
How?I need to repartiond and pit ,and mobile odin dowsnt do it.

Same thing has happened to mine. Sent it off for repair now though. I was running CM9 at the time.

benwilliams123 said:
Same thing has happened to mine. Sent it off for repair now though. I was running CM9 at the time.
Click to expand...
Click to collapse
Repair to a shop or samsung?
Claimed warranty or not?

i've got this problem to, you've probably got a faulty usb port, look into the port and see if you can find all the copper connectors, just today i tried a brand new usb cable, an that works!!!
only... it works 1 time, the first time the copper connectors aren't pushed into the cable, just look at an used cable and see what i mean, the connectors in the middle are pushed in....
what i think is that if you use a set of tweezers to pull them 1-2 mm out, (so they are lined up with the outer connectors) you can make contact again, make sure you're already in debugging mode, if you have used the cable you have to do it again..
btw, i havent tried the tweezers, i had a noever used cable laying around, but it's probably the same idea, so the same effect.... please reply if it worked or not...
btw^2 you're getting the "unknown usb device" error are you not?

Sorry for being late.These days i was ill
Yes maybe i have a faulty port.
But i can't claim warranty because i have glitch kernel and cm7 kang .
I just want to try 1st everything else possible , before a repair.
Also i don't like alot the fact that i will stay without my phone.
I will also try these days to keep it plugged on my turned off notebook (as oxmoss said)
and also try cm9 with cm9 kernel (as Dopedangel said).
Only sometimes (like 1 out of 10) it gives me unknown usb or usb malfunctioned,and (like 2 out of 1000!) it found the phone correctly.
These days , some times if i try to 'move' the cable near the phone it finds the uknown device
but i cant do nothing more. And sometimes i also hear the sound of the speakers getting 'stacked' when connect the usb..
So it must be the usb...
But the pins seem perfect.Also the ones inside the motherboard...
I tried with tweezers but nothing,as everything seems ok...
Anyway for now i use My phone Explorer (via wifi) that can access eveything (contacts,sms,calendar,both disks on root folders etc,and its free)
because ftp apks dont work for me.
Anyway i will try the above solutions and update these days the thread.
Thanks again

[usb device not recognized] samsung galaxy s plus i9001 (complete guide)

Hi everybody,
I finally fixed my phone. It took 1 and a half month to fix my Galaxy S PLUS (I9001). I thought I should share my experience. May be it can help others who are facing same issue.
It all started in end of November. I wasn’t happy with Android 2.3.5. I decided to flash a CUSTOM ROM. First I flashed CM9. It was great. So I decided to flash newer than this one. It was CM10.1 and I was happy with it but there was a problem, Wi-Fi wasn’t working! I was new with Custom ROMS. So I didn’t know that flashing a new Kernel can fix it. So I tried CM12.1. and Yeheee! Everything was working and I was happy to run Android 5 on my S PLUS.
Two days later, my brother was playing CUT THE ROPE HD on my phone. He noticed that game is not running smoothly. So he reset the phone from “Backup and Restore” and it was it!
Phone restarted and it was in boot-loop of TWRP. I tried hundred times to make it work but no progress. I checked YouTube and other forums. The only solution mentioned was, put phone in Download Mode and flash CWMR using ODIN. I already installed Samsung Drivers in my Computer. So there was no need to do it again. I put my phone in Download Mode, Started Odin and when I plugged the cable in my phone. It showed “USB DEVICE IS NOT RECOGNIZED”
I changed THREE USB CABLES, TWO PHONE BATTERIES, THREE ODINs, FOUR SAMSUNG DRIVERS and TWO PCs to make it work but nothing!
I Googled the issue, tried many other things like cleaning window temp files, cleaning drivers, removing battery when connecting to ODIN and constantly pressing volume keys when connecting to ODIN in Download Mode. Nothing worked. Some said it is issue of cable, some said it is phone connector interface problem. clean it with something. I tried that too!
After spending ONE MONTH doing this and that, I give up and went to a phone repairing shop. He said, it is not connecting. I don’t know how to make it work again.
No more hope and phone was in my drawer. After fifteen days I tried all that again but no. but two days ago. I was given an assignment from my University. That was a C++ assignment. My DEVC++ software wasn’t working properly on my WIN 10 EDU (64BIT). I found that, it only works on Win 7 and earlier. So I installed a fresh WIN7 ULTIMATE 32BIT on my second Hard Drive. i installed DevC++ and it worked smoothly. I finished my assignment and my mind clicked that I can try my phone on this OS!
I installed:
MOBOGENIE 3.3.7_10002 (it was for my other phone, not for S PLUS of course!)
Ccleaner506 (Only Cleaned TEMP, registry Untouched)
Samsung Drivers v1.5.53.0
Pray To Allah
Opened ODIN_Multi_Downloader_v4.43
Put my phone in Download Mode and Connected the Cable and IT CONNECTED AND DETECTED BY ODIN SUCCESSFULLY!!!!
Everything was same as before: ODIN, Samsung Drivers, Mobogenie, Phone Battery and Ccleaner but two things were different.
OS: WIN 7 ULT 32BIT (NOW), WIN 10 EDU 64BIT (BEFORE)
USB CABLE:NOKIA ORIGINAL CABLE (NOW)SAMSUNG ORIGINAL CABLE (BEFORE)
The steps I did was, after connecting the phone, I selected “AriesVE.ops” in Select OPS option of ODIN then I checked on “ONE PACKEGE” in ODIN and selected “recovery-clockwork-6.0.1.0-ariesve.tar.md5” by clicking One Package button in ODIN. Then I clicked on START
After some second my phone was ALIVE AGAIN! All files were as they were and it was running CM12.1
Now it is working like before and I am happy to have it back. The reason of describing every single step is that I don’t know what exactly is the reason to make it work! The 32bit WIN7 OS or NOKIA USB CABLE! Or both. So, if you are facing the same problem. Try like I did. I hope it will help you!
Drivers: http://www.mediafire.com/download/wsb5kfqapdsv3w7/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Unbrick tools: http://www.mediafire.com/download/6ymcjpl86fl82j7/Unbrick.rar

So...
So... you say that I need to go back to win7 for the problem to be solved ?

McAlexica said:
So... you say that I need to go back to win7 for the problem to be solved ?
Click to expand...
Click to collapse
That's what i said.. But i think if you have "UP TO DATE" Win 10. Will work too.

imDCStar said:
That's what i said.. But i think if you have "UP TO DATE" Win 10. Will work too.
Click to expand...
Click to collapse
i have win 10 bit will it worrk ?