I was flashing Xposed 5.1.1 onto my CM12.1 in TWRP. It didn't have any errors and I rebooted. Half an hour later my phone is still trying to boot into CM. I restarted into bootloader mode and tried recovery. Recovery starts booting and shows the teamwin sign. Then it restarts into CM. I tried reflashing TWRP and it succeeded but TWRP still restarts my phone.
tl;dr: my phone boots into bootloader; fastboot working twrp broken.
Any help would be much appreciated
Related
I upgraded TWRP 2.2.0 to TWRP 2.3.0 via GooManager. I try to test it by flashing a rom (via GooManager). The TP reboot and the TWRP home screen displayed then stuck (did not respond to any touch commands) then after 15-30 seconds, the unit reboot itself to Moboot screen. I selected to boot into CyanogenMod, the screen stayed at "loading..." but nothing happened. I reboot the unit (Power+Home) and tried TWRP again and same thing happened. I can't get the TWRP to work nor boot into CM. Boot into WebOS is working.
Any idea how to fix this issue?
Thank you.
So I was using my One as usual, and I opened up the facebook app. The phone's screen went black a second later, and started to reboot. It rebooted, and stayed on for about a minute before rebooting again, and again. I then tried to boot into recovery mode, but I was only able to make it to the TWRP Logo before it enters the reboots again. I then tried to switch the recovery to CWM, and make a backup. It finished about half of the backup before it rebooted again. But this time, the boot did not complete. After attempting to backup with CWM, my phone entered a bootloop. I tried booting into TWRP again, and again, but no luck. I am was running ViperOne 6.2.1 with Elemental X 14.12, HBOOT 1.56, and S-ON. Any ideas on how to fix this problem? I just went through the process of wiping, and rebuilding my phone less than a month ago, and I don't wanna do it again. So I'd prefer not to wipe the internal storage.
Hi everyone, I'm having a weird issue since this morning and could not solve it yet, maybe someone can help me.
Basically I tried to dirty flash the new nightly of CM12.1 using TWRP 2.8.6.0 and it got stuck. After rebooting the device I could not get to twrp anymore (strangely) and then I tried to reflash it (two different versions) with no success.
With my device being in this state (without booting into OS and with no recovery access) I had to download the stock 5.0.2 for the XT1068 and flash it using fastboot. It can now boot up normally into stock ROM and restored the stock recovery, but now any custom recovery I flash it does not work. I had two different results on two versions of twrp:
2.8.5.0 - After flashing it and trying to access it the device shows the "unlocked bootloader" screen and then reboots itself and goes to the ROM without even getting into TWRP.
2.8.6.0 - After flashing it and trying to access it the device goes to the "unlocked bootloader" screen and freezes there. I have then to hold the power button for a long time (about 1,5 min) and then the device boots the stock ROM.
Anyone can give any idea of what I can do? I even tried to lock and unlock the bootloader again, flash CWM, flash TWRP and nothing. At least the device is booting, so it is not a urgency, but any help is appreciated!
----------------------------
I got it, a stupid reason for all issues I was having. The issue was with my router, that was set to use a internal firewall which was screwing up a lot of my downloads, and the ROM and TWRP files just got into this issue.
After reconfiguring my router everything worked out, which make me fell stupid for not thinking about this before hahaha, but at least it is fixed
Thanks for everyone who took a time to read this and sorry for any inconvenience!
SOLUTION: Turns out I was still able to boot into eRecovery. From there I could reboot normally into the system. I then went into fastboot and flashed Blackball's TWRP 3.2.1-0 build for Oreo. Everything boots smoothly now.
Hello,
today I decided to try and flash the ResurrectionRemix-GSI to my Huawei P10 (EMUI 8.0) which was successful at first. I unlocked the bootloader, flashed TWRP via fastboot (First Link to TWRP in this thread). From TWRP I did a complete backup and wipe and installed ResurrectionRemix (ARM64 A-only from this thread). The system booted up just fine and everything seemed to work like a charm. I then went on to boot into recovery again, because I wanted to install the pico package from OpenGApps.
The problem now is that I'm stuck on the splash screen of TWRP. When I try to turn off the phone by holing the power button, it just reboots to recovery, which greets me with the everlasting splash screen. I have also tried rebooting the phone via adb -> same result. And to make it even better: When I try to get into fastboot mode via "adb reboot bootloader", I get thrown back into recovery as well.
My current "strategy" is to just drain the battery and hope for the best (well... I can't even turn the phone off anyway). I've read that other people have waited up to 6 min for TWRP's splash screen to dissapear. I'm waiting for roughly an hour now, so I'm pretty positive, that it's stuck.
Hope someone can help.
UPDATE: The battery has drained now. When I connected the phone to its charger, it went straight into recovery and is stuck again. Fastboot still doesn't work.
Huawei phones do not seem to go along very well with TWRP for installing GSIs. The original recovery is required to do a factory reset, before you can boot into system. Can you reboot in fastboot mode? If yes I would flash the original recovery and system from fastboot. It is clearly explained on the Openkirin.net website. I can also recommend flashing one of their GSIs, since they include the Huawei camera and nano Gapps.
M1chiel said:
Huawei phones do not seem to go along very well with TWRP for installing GSIs. The original recovery is required to do a factory reset, before you can boot into system. Can you reboot in fastboot mode? If yes I would flash the original recovery and system from fastboot. It is clearly explained on the Openkirin.net website. I can also recommend flashing one of their GSIs, since they include the Huawei camera and nano Gapps.
Click to expand...
Click to collapse
No, I can't boot into fastboot mode, at least not via adb (only method I know of). When I run "adb reboot bootloader" it just throws me back into recovery mode with the splash-screen stuck.
So I successfully rooted my lg k8 2018 (lg aristo 2). I decided to install gravitybox and turned on some things. I rebooted my phone and now it's stuck on the boot logo. I can't boot into recovery because I get the bootloader is unlocked message. (Not possible to re-lock it w/o putting my phone into a boot loop). I can get into fastboot by holding down and plugging in my phone. What should I do?
Update: I need to be able to get into recovery to flash xposed uninstaller. However, because I get the bootloader is unlocked message, I cant. I tried at least a thousand times. I also tried the button combination to disable xposed on startup. That didn't work. It was running android 7.X (I think 7.1 or 7.2)