everytime i flash a custom recovery all i get is the same samsung stock recovery (note 5 sm-n920c)
and i don't know why , and by the way when i flash the custom recovery odin tells that everything is completed without of errors !! , but still getting the stock recovery !
here is what appears in odin when i flash it
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
please help guys :crying:
abodi40400 said:
everytime i flash a custom recovery all i get is the same samsung stock recovery (note 5 sm-n920c)
and i don't know why , and by the way when i flash the custom recovery odin tells that everything is completed without of errors !! , but still getting the stock recovery !
here is what appears in odin when i flash it
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
please help guys :crying:
Click to expand...
Click to collapse
Did you enable OEM UNLOCK under developer options ?
abodi40400 said:
everytime i flash a custom recovery all i get is the same samsung stock recovery (note 5 sm-n920c)
and i don't know why , and by the way when i flash the custom recovery odin tells that everything is completed without of errors !!
Click to expand...
Click to collapse
Flash the recovery with Auto Reboot unchecked.
Related
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
knorki said:
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
Click to expand...
Click to collapse
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
omarainea said:
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
Click to expand...
Click to collapse
thx full wipe and flash again worked
Hi,
I need help to install the stock ROM for my S4 Active I9592.
When I try to flash it with ODIN (v3.07) it tells me: FAIL!(AUTH)
I have searched for an answer but have'nt found any.
Does anyone know what I can do?
PS: I currently have Darkmans custom rom installed.
Thanks,
Frozzt
Flash the CSC and cp files only
Sent from my SGH-I537 rooted, running GPE 4.4.4 ROM
Thanks,
I'll try it!
I can't seem to fin the files...stupid me.-.
The name of the file I'm trying to flash is named: I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5
Since I'm a new member I can't post links yet..
Thanks,
Frozzt
Perhaps you can find the firmware here
This is the message I get when trying to flash this file: I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5
And it is the file for my country.
Message from ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius
Hello all, I have looked everywhere and no one seems to be having the same problem as I have here.
So here is the problem: My note 4 keeps going into recovery and is giving me a few messages.
1) In the stock Android recovery that it boots into, on the bottom it displays "dm-verity verification failed..."
2) When clicking on "apply update from external storage", it gives me "Update from external storage is disabled"
Background:
In a previous post, I was trying to install Xposed framework and had an issue where it would not install. A friendly user suggested I install a different APK and flash a zip file through TWRP. I then installed TWRP through a play store app and booted into it. I installed the zip file, wiped data (including Dalvik) and the problem started.
So I tried flashing original N910T Rom through Odin and this is the log I got
BTW I am still able to access TWRP through holding Volume Up:Homeower but when phone boots up it goes into Android Recovery mode automatically, no bootloop. I tried clearing Data but that didnt help. Should I clear "System" through TWRP and reflash?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Superdudekk said:
So I tried flashing original N910T Rom through Odin and this is the log I got
BTW I am still able to access TWRP through holding Volume Up:Homeower but when phone boots up it goes into Android Recovery mode automatically, no bootloop. I tried clearing Data but that didnt help. Should I clear "System" through TWRP and reflash?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you may need this
http://forum.xda-developers.com/not...f-g-c-t-w8-t3282641/post64569392#post64569392
Unfortunately I tried that but I found a solution! A helpful youtube video showed that with these new Samsung Phones, you can connect to Kie3 or Smart Switch and click "Emergency Software Recovery and Initialization", enter your model and serial number and the program will automatically wipe and flash OEM Samsung ROM onto the phone. Only bad thing is that you have to re-root the phone. Great solution for soft bricks.
I have the SM-G920T S6 and I recently tried to install twrp and root using this guide: http://forum.xda-developers.com/tmo...l/how-to-flash-marshmallow-update-sm-t3362983. I have always used a nexus device so I am not familiar with odin, but I thought I had it figured out. In odin it says the recovery flash was successful and gave me a PASS message. Once I tried rebooting to recovery it was still the stock recovery and no twrp. I have gone back over the instructions, but I still get the same results. I have checked and my system is now marked as custom but Knox is not tripped. Any help would be appreciated.
You are really close. I had similar trouble flashing twrp o. My G920T. I got it to work flash with Odin using twrp by idlekernel. Here is the link download the version to flash with odin under AP or PDA.
I hope this helps.
RedZaton said:
You are really close. I had similar trouble flashing twrp o. My G920T. I got it to work flash with Odin using twrp by idlekernel. Here is the link download the version to flash with odin under AP or PDA.
I hope this helps.
Click to expand...
Click to collapse
Thank you. Which of those md5 files should I download?
I installed "twrp-3.0.2-2-zeroflte.tar.md5" via Odin.
RedZaton said:
I installed "twrp-3.0.2-2-zeroflte.tar.md5" via Odin.
Click to expand...
Click to collapse
I tried it again and it still does not do anything. I unchecked auto reboot and noticed that it still had the download bar up like it did not finish but even after 15 min the bar stayed.
Odin says this when I flash the image:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
trixter29 said:
I tried it again and it still does not do anything. I unchecked auto reboot and noticed that it still had the download bar up like it did not finish but even after 15 min the bar stayed.
Odin says this when I flash the image:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Make sure auto reboot is unchecked in Odin, flash Twrp and boot directly into it after flash. It should work just fine with MM.