Hi,
I need help to install the stock ROM for my S4 Active I9592.
When I try to flash it with ODIN (v3.07) it tells me: FAIL!(AUTH)
I have searched for an answer but have'nt found any.
Does anyone know what I can do?
PS: I currently have Darkmans custom rom installed.
Thanks,
Frozzt
Flash the CSC and cp files only
Sent from my SGH-I537 rooted, running GPE 4.4.4 ROM
Thanks,
I'll try it!
I can't seem to fin the files...stupid me.-.
The name of the file I'm trying to flash is named: I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5
Since I'm a new member I can't post links yet..
Thanks,
Frozzt
Perhaps you can find the firmware here
This is the message I get when trying to flash this file: I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5
And it is the file for my country.
Message from ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Related
When i setup Rom Stock 4.1.2 I9305TDVBME2_I9305TTELBME1_TEL by Odin, i have problem. I can't setup to my phone, allway FAIR z :
in Odin :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305TDVBME2_I9305TTELBME1_I9305TDVBME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
in phone :
Unsupported Version
I think may be i setup wrong Rom
Plz help me, thanks
Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius
everytime i flash a custom recovery all i get is the same samsung stock recovery (note 5 sm-n920c)
and i don't know why , and by the way when i flash the custom recovery odin tells that everything is completed without of errors !! , but still getting the stock recovery !
here is what appears in odin when i flash it
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
please help guys :crying:
abodi40400 said:
everytime i flash a custom recovery all i get is the same samsung stock recovery (note 5 sm-n920c)
and i don't know why , and by the way when i flash the custom recovery odin tells that everything is completed without of errors !! , but still getting the stock recovery !
here is what appears in odin when i flash it
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
please help guys :crying:
Click to expand...
Click to collapse
Did you enable OEM UNLOCK under developer options ?
abodi40400 said:
everytime i flash a custom recovery all i get is the same samsung stock recovery (note 5 sm-n920c)
and i don't know why , and by the way when i flash the custom recovery odin tells that everything is completed without of errors !!
Click to expand...
Click to collapse
Flash the recovery with Auto Reboot unchecked.
Hello all, I have looked everywhere and no one seems to be having the same problem as I have here.
So here is the problem: My note 4 keeps going into recovery and is giving me a few messages.
1) In the stock Android recovery that it boots into, on the bottom it displays "dm-verity verification failed..."
2) When clicking on "apply update from external storage", it gives me "Update from external storage is disabled"
Background:
In a previous post, I was trying to install Xposed framework and had an issue where it would not install. A friendly user suggested I install a different APK and flash a zip file through TWRP. I then installed TWRP through a play store app and booted into it. I installed the zip file, wiped data (including Dalvik) and the problem started.
So I tried flashing original N910T Rom through Odin and this is the log I got
BTW I am still able to access TWRP through holding Volume Up:Homeower but when phone boots up it goes into Android Recovery mode automatically, no bootloop. I tried clearing Data but that didnt help. Should I clear "System" through TWRP and reflash?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Superdudekk said:
So I tried flashing original N910T Rom through Odin and this is the log I got
BTW I am still able to access TWRP through holding Volume Up:Homeower but when phone boots up it goes into Android Recovery mode automatically, no bootloop. I tried clearing Data but that didnt help. Should I clear "System" through TWRP and reflash?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you may need this
http://forum.xda-developers.com/not...f-g-c-t-w8-t3282641/post64569392#post64569392
Unfortunately I tried that but I found a solution! A helpful youtube video showed that with these new Samsung Phones, you can connect to Kie3 or Smart Switch and click "Emergency Software Recovery and Initialization", enter your model and serial number and the program will automatically wipe and flash OEM Samsung ROM onto the phone. Only bad thing is that you have to re-root the phone. Great solution for soft bricks.
New to using Odin, Note 5 crashed and try to fix it by flashing with Odin. Downloaded the MD5 file and every time I try to flash it I get a big "FAIL" at modem.bin. Thoughts?
This is what I get. Please help!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920VVRS3BPI1_N920VVZW3BPI1_N920VVRS3BPI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you solve this yet? Same issue here!
what version odin you using?
What firmware you want to flash?downgrade or upgrade?