I am trying to update my firmware so that I can get the new Viperone 9.0.0 rom. I keep getting the error when I try to flash it 41 Wrong Model ID
I researched the error and I have to rename my CID. I rooted and s-off my phone via the Hasoon2000 tool. There was a command that seems automatic which reads rename CID. I select it, a prompt appears asking me to input the CID I want. As a test I type in 3 random numbers and press Ok, then I get the error Invalid CID. What should I type in?
Archangel22 said:
I am trying to update my firmware so that I can get the new Viperone 9.0.0 rom. I keep getting the error when I try to flash it 41 Wrong Model ID
I researched the error and I have to rename my CID. I rooted and s-off my phone via the Hasoon2000 tool. There was a command that seems automatic which reads rename CID. I select it, a prompt appears asking me to input the CID I want. As a test I type in 3 random numbers and press Ok, then I get the error Invalid CID. What should I type in?
Click to expand...
Click to collapse
post the output of "fastboot getvar all"
what firmware file are you trying to flash
Wrong Model ID = wrong MID not CID....
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3250.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.708.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4121mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
As for firmware Im trying to use either of these from the link attached
fw_7.19.401.30-NoRed_NoWipe
fw_7.19.401.51-NoRed_NoWipe
http://forum.xda-developers.com/htc...e-htc-one-m7-red-warning-wipe-t2965090/page24
I posted on the Viperone 9.0.0 section here at xda and someone said that the first one above should be fine. I used Hasoon2000s tool to change my CID, did I do that correctly or have I botched it and should change it to something else? Or do I need another firmware? Im not sure which one exactly is suitable for Viperone 9.0.0 if I can install a later one or if I need a specific one. I believe I just have to flash the firmware first and then go into Recovery and extract the Viper 9.0 zip file and that should be it right?
Archangel22 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3250.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.708.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4121mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
As for firmware Im trying to use either of these from the link attached
fw_7.19.401.30-NoRed_NoWipe
fw_7.19.401.51-NoRed_NoWipe
http://forum.xda-developers.com/htc...e-htc-one-m7-red-warning-wipe-t2965090/page24
I posted on the Viperone 9.0.0 section here at xda and someone said that the first one above should be fine. I used Hasoon2000s tool to change my CID, did I do that correctly or have I botched it and should change it to something else? Or do I need another firmware? Im not sure which one exactly is suitable for Viperone 9.0.0 if I can install a later one or if I need a specific one. I believe I just have to flash the firmware first and then go into Recovery and extract the Viper 9.0 zip file and that should be it right?
Click to expand...
Click to collapse
Change your phone MID to PN0710000
Code:
adb shell
su
echo -ne '\x50\x00\x4e\x00\x30\x00\x37\x00\x31\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p6 bs=1 seek=16384
exit
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip fw_7.19.401.51-NoRed_NoWipe
fastboot flash zip fw_7.19.401.51-NoRed_NoWipe
fastboot reboot-bootloader
or change the MID listed in the android-info.txt file inside the fimrware.zip to to PN0714000
Related
hi guys
my htc one hboot = 1.56
os- 4.06.1540.3
radio- 4A.22.32.63.14
and i want to flash..
"RUU Zip M7 UL JB 50 HTC Europe 1.29.401.16 R Radio 4A.14.3250.13 10.33.1150.01 Release 318486 Signed 2 4 Decrypted"
its okay or not?
if not, why ?,and how to correct?
Bilal_alnima said:
hi guys
my htc one hboot = 1.56
os- 4.06.1540.3
radio- 4A.22.32.63.14
and i want to flash..
"RUU Zip M7 UL JB 50 HTC Europe 1.29.401.16 R Radio 4A.14.3250.13 10.33.1150.01 Release 318486 Signed 2 4 Decrypted"
its okay or not?
if not, why ?,and how to correct?
Click to expand...
Click to collapse
how about you post a "fastboot getvar all" (without IMEI and s/n); the above info doesn't say much.
nkk71 said:
how about you post a "fastboot getvar all" (without IMEI and s/n); the above info doesn't say much.
Click to expand...
Click to collapse
my question about hboot.
i think ruu has hboot old than mine, so if i flash it, any problem will occurs or its okay?
Bilal_alnima said:
my question about hboot.
i think ruu has hboot old than mine, so if i flash it, any problem will occurs or its okay?
Click to expand...
Click to collapse
post your ''fastboot getvar all'' as said before.
Bilal_alnima said:
my question about hboot.
i think ruu has hboot old than mine, so if i flash it, any problem will occurs or its okay?
Click to expand...
Click to collapse
yes ruu (you mentioned) has hboot 1.44, but if you are s-off, then you are able to downgrade (you may need to downgrade hboot first)
but without a "fastboot getvar all" (removing IMEI and s/n), i can't say if that ruu is for your phone or not
alray said:
post your ''fastboot getvar all'' as said before.
Click to expand...
Click to collapse
nkk71 said:
yes ruu (you mentioned) has hboot 1.44, but if you are s-off, then you are able to downgrade (you may need to downgrade hboot first)
but without a "fastboot getvar all" (removing IMEI and s/n), i can't say if that ruu is for your phone or not
Click to expand...
Click to collapse
ruu not for my phone but i will change cid & mid
about hboot, so i *must* downgrade first?
here is my phone info..
=== === ===
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: Removed
(bootloader) imei: Removed
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3817mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.082s
=== === ===
bilal_alnima said:
ruu not for my phone but i will change cid & mid :d
about hboot, so i *must* downgrade first?
Here is my phone info..
=== === ===
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4a.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.3
(bootloader) version-misc: Pvt ship s-off
(bootloader) serialno: remove
(bootloader) imei: remove
(bootloader) meid: 00000000000000
(bootloader) product: M7_u
(bootloader) platform: Hboot-8064
(bootloader) modelid: Pn0712000
(bootloader) cidnum: Bs_us001
(bootloader) battery-status: Good
(bootloader) battery-voltage: 3817mv
(bootloader) partition-layout: Generic
(bootloader) security: Off
(bootloader) build-mode: Ship
(bootloader) boot-mode: Fastboot
(bootloader) commitno-bootloader: Dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Finished. Total time: 0.082s
=== === ===
Click to expand...
Click to collapse
dont post imei and sn!
Bilal_alnima said:
ruu not for my phone but i will change cid & mid
about hboot, so i *must* downgrade first?
here is my phone info..
=== === ===
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_u
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
all: Done!
finished. total time: 0.082s
=== === ===
Click to expand...
Click to collapse
as mentioned by @alray, remove IMEI and s/n
change MID using: http://forum.xda-developers.com/showthread.php?t=2535365 to PN0711000 <- consistent with M7_U
change CID to HTC__J15:
fastboot oem writecid HTC__J15 <- consistent with WWE GCC (which is what I assume you want)
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes twice, make sure it's successful
fastboot reboot-bootloader
i know a RUU.EXE (downgrade) will fail with hboot 1.55+ but not sure about fastboot ruu mode zip flash, it will probably work just fine (i think). (first flash should downgrade hboot and say "flush again immediately", second flash should downgrade everything)
IF above flash zip gives error then downgrade hboot first:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot reboot-bootloader
then flash ruu.zip
stay s-off
nkk71 said:
as mentioned by @alray, remove IMEI and s/n
change MID using: http://forum.xda-developers.com/showthread.php?t=2535365 to PN0711000 <- consistent with M7_U
change CID to HTC__J15:
fastboot oem writecid HTC__J15 <- consistent with WWE GCC (which is what I assume you want)
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes twice, make sure it's successful
fastboot reboot-bootloader
i know a RUU.EXE (downgrade) will fail with hboot 1.55+ but not sure about fastboot ruu mode zip flash, it will probably work just fine (i think). (first flash should downgrade hboot and say "flush again immediately", second flash should downgrade everything)
IF above flash zip gives error then downgrade hboot first:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot reboot-bootloader
then flash ruu.zip
stay s-off
Click to expand...
Click to collapse
Ok, thank you for everything
How do i proceed whit this!
Hi. i am noob whit this kind of stuff, Rootting flashing etc.. But yes i manage to unlock my hboot and install a customrecovery. My question is now what i can do now, and how i can do it. how i proceed whit this. i'd like to upgrade my HTC one to google play edition (Android revolution hd) or is there a better? I am now running Android 4.4.2 whit sense 5.5
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:---
(bootloader) imei: --
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4089mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So what i must do to make my phone shine Thanks allready !
i don't know if this is not in a right place
nkk71 said:
i know a RUU.EXE (downgrade) will fail with hboot 1.55+ but not sure about fastboot ruu mode zip flash, it will probably work just fine (i think). (first flash should downgrade hboot and say "flush again immediately", second flash should downgrade everything)
Click to expand...
Click to collapse
flashed successfully, didn't need to downgrade.. :good:
Superpulla said:
Hi. i am noob whit this kind of stuff, Rootting flashing etc.. But yes i manage to unlock my hboot and install a customrecovery. My question is now what i can do now, and how i can do it. how i proceed whit this. i'd like to upgrade my HTC one to google play edition (Android revolution hd) or is there a better? I am now running Android 4.4.2 whit sense 5.5
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:---
(bootloader) imei: --
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4089mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So what i must do to make my phone shine Thanks allready !
i don't know if this is not in a right place
Click to expand...
Click to collapse
go to http://download.cyanogenmod.org/?device=m7ul&type=snapshot
download the cm-11-20140104-SNAPSHOT-M2-m7ul.zip
transfer it to the internal storage of ur One.
go 2 ur custom recovery(I would recommend TWRP, but CWM will work fine)
wipe data
install-scroll down and choose cm-11-20140104-SNAPSHOT-M2-m7ul.zip
flash it
reboot
once ur phone boots up fine, u will notice that the google apps are not there. go the following link on ur pc:
http://wiki.cyanogenmod.org/w/Google_Apps
choose version CM11
again copy the zip 2 ur internal storage nd install- scroll down nd choose the zip which u just downloaded
flash it
ur done
Hello to all XDA members. I am having the same problem as the OP I would like to run this RUU (Sprint_HTC_One_m7wls_1.29.651.10_RUU)
can someone give me some instructions on how to complete this task?
THANK YOU VERY MUCH
P.S I just hangs on the black htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid:
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085sC:\android-sdk-windows\platform-tools>
I would like to achieve the same downgrade if someone can direct we as well.
THANK YOU VER MUCH
acuraman73 said:
Hello to all XDA members. I would like to achieve the downgrade if you can direct we as well THANK YOU VER MUCH
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid:
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
Click to expand...
Click to collapse
why did you censored modelid? we need that info. only censor IMEI and serialno. Your device is s-off so you can use this decrypted ruu.zip here, you have to flash it in ruu mode.
Sorry about that.
Sprint_HTC_One_m7wls_1.29.651.10_RUU
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
acuraman73 said:
Sorry about that.
Sprint_HTC_One_m7wls_1.29.651.10_RUU
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Make sure your ruu.zip is in the adb/fastboot folder
reboot phone to bootloader, select fastboot then connect usb cable
open a cmd prompt from your adb/fastboot folder
Code:
fastboot oem rebootRUU
your phone will reboot in ruu mode, you will see a black screen with HTC logo
Code:
fastboot flash zip <name_of_your_ruu_file>.zip
fastboot flash zip <name_of_your_ruu_file>.zip <------- yes, again!
fastboot reboot-bootloader
done
Thank you:d
I have an HTC One AT&T M7. I flashed a custom rom to try and get sense 6 but fell into a bootloop, long story short I desided to try and restore back to what I had before. So I downloaded RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe, but when I run it it get stuck at "(1/6) Sending.....". I have let is sit for an hour with no progress. Anyone know what's wrong? If not, is there any other method I can try and restore my phone?
One thing I see asked a lot is if usb debugging is enabled. I do not know, and can not check as I can not boot at the moment.
RedHatter271 said:
I have an HTC One AT&T M7. I flashed a custom rom to try and get sense 6 but fell into a bootloop, long story short I desided to try and restore back to what I had before. So I downloaded RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe, but when I run it it get stuck at "(1/6) Sending.....". I have let is sit for an hour with no progress. Anyone know what's wrong? If not, is there any other method I can try and restore my phone?
One thing I see asked a lot is if usb debugging is enabled. I do not know, and can not check as I can not boot at the moment.
Click to expand...
Click to collapse
what rom were you trying to flash
what is your custom recovery and what is the version #?
post the output of "fastboot getvar all" except imei and serialno.
alray said:
what rom were you trying to flash
Click to expand...
Click to collapse
AT&T 4.4.2/4.4.3 Debloated Sense 6 ROM/VVM Integrated Release 8-13-2014
alray said:
what is your custom recovery and what is the version #?
Click to expand...
Click to collapse
I had TWRP (not sure the version) but the attemped RUU looks like it wiped it.
alray said:
post the output of "fastboot getvar all" except imei and serialno.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.037s
RedHatter271 said:
AT&T 4.4.2/4.4.3 Debloated Sense 6 ROM/VVM Integrated Release 8-13-2014
I had TWRP (not sure the version) but the attemped RUU looks like it wiped it.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.037s
Click to expand...
Click to collapse
I have had lots of issue with running the 4.x RUUs. Your other option will be to push a rom to the sdcard using TWRP/adb sideload. Try this: http://forum.xda-developers.com/showthread.php?t=2676986
RedHatter271 said:
AT&T 4.4.2/4.4.3 Debloated Sense 6 ROM/VVM Integrated Release 8-13-2014 - This rom Requires S-off and a special firmware and TWRP installed
I had TWRP (not sure the version) but the attemped RUU looks like it wiped it.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON You need s-off
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.037s
Click to expand...
Click to collapse
Couple things ...when you pick a rom read the install instructions 2-3 times till you understand them.
For now you need to start over and follow this
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse
Now try and get S-Off with firewater, after that you can use the firmware and recovery in the file you have above
SaHiLzZ said:
I have had lots of issue with running the 4.x RUUs. Your other option will be to push a rom to the sdcard using TWRP/adb sideload. Try this: http://forum.xda-developers.com/showthread.php?t=2676986
Click to expand...
Click to collapse
I tired to sideload before I tried the RUU and it didn't work, but I thought I'd try again. I flashed TWRP and sideloaded CyanogenMod (I already had it downloaded). It worked. I don't know what the problem was before.
hi,
i got htc one m7ul phone. it was s-off but with locked bootloader.
so i unlocked it successfully n then i tried to flash latest firmware. 6.09.401.5
after successful flashing i reboot phone and ended up with htc logo and 4 triangles at each corner.
i cant access my phone.
cant boot into bootloader however i can use basic adb commands
here is info regarding the phone
C:\Users\Dell-Win 7\Desktop\toolkit>fastboot get
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.708.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ********
(bootloader) imei: ************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4228mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
what can be done??
can i install ruu directly n get to stock??
please guide me what i did wrong?
i want to install arhd 81
with modified hboot with no red warning thank u
chdpiyush said:
hi,
i got htc one m7ul phone. it was s-off but with locked bootloader.
so i unlocked it successfully n then i tried to flash latest firmware. 6.09.401.5
after successful flashing i reboot phone and ended up with htc logo and 4 triangles at each corner.
i cant access my phone.
cant boot into bootloader however i can use basic adb commands
here is info regarding the phone
C:\Users\Dell-Win 7\Desktop\toolkit>fastboot get
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.708.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ********
(bootloader) imei: ************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4228mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
what can be done??
can i install ruu directly n get to stock??
please guide me what i did wrong?
i want to install arhd 81
with modified hboot with no red warning thank u
Click to expand...
Click to collapse
umm... fastboot is working try to get in flashRUU mode!
1: fastboot oem rebootRUU
2: if working flash RUU zip that you prefer but not 6.X.X because this is only update, don't exist a full stock ruu of 6.x.x (i think). the comand is: fastboot flash zip xxx.zip
when i do step 1 i end up with htc logo and 4 triangles at each corner
now i m downloading ruu.exe and changed cid to d required cid for the ruu
will try to flash n check what happens
Godric8 said:
umm... fastboot is working try to get in flashRUU mode!
1: fastboot oem rebootRUU
2: if working flash RUU zip that you prefer but not 6.X.X because this is only update, don't exist a full stock ruu of 6.x.x (i think). the comand is: fastboot flash zip xxx.zip
Click to expand...
Click to collapse
i think i can do ruu.exe as its s-0ff or any suggestion u want to give?
chdpiyush said:
i think i can do ruu.exe as its s-0ff or any suggestion u want to give?
Click to expand...
Click to collapse
find a decrypted RUU you want and edit the android_info.txt to match your MID / CID Flash in fastboot oem rebootRUU
if your goal is to get OTA updates you should choose the International Version and change your MID and CID to match one of those then use the .401 RUU
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
This should update to 6.xx.401.x
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
Problem solved. Phone was stuck in ruu mode with HTC logo n 4 triangles on each corner. It solved after I flashed firmware which came with 4.3 version. N fixed. May b something to do with firmware flash. Phone was on stock 4.3 before unlocking boot loader n flashing latest 4.4.3 firmware.
Sent from my HTC One using XDA Free mobile app
I got a HTC ONE M7 O2 UK. I fully unlocked and installed ROM ViperOne.
Today I want to sell my phone and put it back everything where it was or including better. I had bad experience with ViperOne, so I want WWE last ROM.
I went to htc1guru and got the lastest RRU, but everytime I try to upgrade it, it get stuck on "Sending...".
Was thinking thats maybe because I'm trying to downgrade and isnt possible. but when it starts it says 1.9.401.2 or something like that, and the one im trying to installe it seems latest version over the one I have.
So what I should do? I tryed opening the RUU and get the rom.zip from temp folder and put it on the card but it says its corrupted, redownloaded it again and same thing.
Im doing something wrong? Or whats the best thing I can do ?
S-OFF device CID 02 001
os 2.24.206.7
Greetings
Stefanot04 said:
I got a HTC ONE M7 O2 UK. I fully unlocked and installed ROM ViperOne.
Today I want to sell my phone and put it back everything where it was or including better. I had bad experience with ViperOne, so I want WWE last ROM.
I went to htc1guru and got the lastest RRU, but everytime I try to upgrade it, it get stuck on "Sending...".
Was thinking thats maybe because I'm trying to downgrade and isnt possible. but when it starts it says 1.9.401.2 or something like that, and the one im trying to installe it seems latest version over the one I have.
So what I should do? I tryed opening the RUU and get the rom.zip from temp folder and put it on the card but it says its corrupted, redownloaded it again and same thing.
Im doing something wrong? Or whats the best thing I can do ?
S-OFF device CID 02 001
os 2.24.206.7
Greetings
Click to expand...
Click to collapse
Hi, please post the output of "fastboot getvar all" (hide your imei and serialno before posting)
alray said:
Hi, please post the output of "fastboot getvar all" (hide your imei and serialno before posting)
Click to expand...
Click to collapse
I cant, everytime I try i get "waiting for device"
Stefanot04 said:
I cant, everytime I try i get "waiting for device"
Click to expand...
Click to collapse
is your phone in bootloader ---> fastboot usb mode ?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3931mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Stefanot04 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3931mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
1-Change your CID:
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
2-Update your firmware
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
3-Flash the 7.19.401.51 RUU:
Code:
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip
fastboot reboot
4-Sell your phone as an up-to-date WWE M7
* You must use htc_fastboot.exe to flash the ruu (htc_fastboot flash zip ruu.zip). Just save htc_fastboot.exe in the same folder you already have adb.exe and fastboot.exe on your computer.
PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip
M7_UL_Firmware_7.19.401.2.zip
htc_fastboot.exe
DONE, thank you very much.
User will be able to do OTA updates?
Greetings
Stefanot04 said:
DONE, thank you very much.
User will be able to do OTA updates?
Greetings
Click to expand...
Click to collapse
yes
Hi
Hi I'm back, got another HTC One, tried the same and Im getting an error. Cant continue.
After fastboot oem rebootRUU when I try to flash the zip I get error 99 unknown.
getvar info (OF NEW PHONE HERE)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3947mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Click to expand...
Click to collapse
I was trying to S-OFF.
The idea was to put device on s-off, install everything I need, and install:
*PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed
*M7_UL_Firmware_7.19.401.2
Like I did for my old htc one. (this post)
Now Im stuck on HTC One white screen. (every time I do a normal boot I get that screen, cant load phone back after installing super su via TWRP (was trying to s-off it)), only to bootloader menu access.
(Apart from this I tried to Soff it using firewater... i get till adb push firewater... then adb shell.. till there excellent... then.. su enter and it says su not found.. so i jump that step and continue with chmod 755 /data/local/tmp/fire till there ok.. then the next command /data/local/tmp/fire and it says sintax error... while its perfectly fine.. expecting ")"... so well. I cant soff it.. tried all day... neigher doing what it says on the post... only trying to leave the phone on the last firmware update.)
Thanks in advance
Stefanot04 said:
Hi I'm back, got another HTC One, tried the same and Im getting an error. Cant continue.
After fastboot oem rebootRUU when I try to flash the zip I get error 99 unknown.
getvar info (OF NEW PHONE HERE)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3947mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
I was trying to S-OFF.
The idea was to put device on s-off, install everything I need, and install:
*PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed
*M7_UL_Firmware_7.19.401.2
Like I did for my old htc one. (this post)
Now Im stuck on HTC One white screen. (every time I do a normal boot I get that screen, cant load phone back after installing super su via TWRP (was trying to s-off it)), only to bootloader menu access.
(Apart from this I tried to Soff it using firewater... i get till adb push firewater... then adb shell.. till there excellent... then.. su enter and it says su not found.. so i jump that step and continue with chmod 755 /data/local/tmp/fire till there ok.. then the next command /data/local/tmp/fire and it says sintax error... while its perfectly fine.. expecting ")"... so well. I cant soff it.. tried all day... neigher doing what it says on the post... only trying to leave the phone on the last firmware update.)
Thanks in advance
Click to expand...
Click to collapse
You don't need soff to flash a ruu on this phone. If you absolutely want s-off your must use Sunshine S-off (25$ USD) , firewater is discontinued, will not work even if you have the file, it need online resources that are not available anymore to do its magic. And even if it was still working, you can't just skip some steps like that... Firewater was designed to work when booted in a rooted rom and all steps was required. Relock the bootloader and flash a 7.19.401.x ruu using htc_fastboot.exe.
Sent from my HTC One using XDA Labs
alray said:
You don't need soff to flash a ruu on this phone. If you absolutely want s-off your must use Sunshine S-off (25$ USD) , firewater is discontinued, will not work even if you have the file, it need online resources that are not available anymore to do its magic. And even if it was still working, you can't just skip some steps like that... Firewater was designed to work when booted in a rooted rom and all steps was required. Relock the bootloader and flash a 7.19.401.x ruu using htc_fastboot.exe.
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
open cmd, wrote htc_fastboot zip europe.zip
and got
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>htc_fastboot flas
h zip oficialeurope.zip
sending 'zip'... (50228 KB) OKAY
sending time = 3.078 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 8(s)
Click to expand...
Click to collapse
(already locked bootloader)
Here its a get var.
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>fastboot getvar a
ll
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH34JW906050
(bootloader) imei: 354436055366916
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3835mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
Click to expand...
Click to collapse
Greetings
Stefanot04 said:
open cmd, wrote htc_fastboot zip europe.zip
and got
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>htc_fastboot flas
h zip oficialeurope.zip
sending 'zip'... (50228 KB) OKAY
sending time = 3.078 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 8(s)
(already locked bootloader)
Here its a get var.
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>fastboot getvar a
ll
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH34JW906050
(bootloader) imei: 354436055366916
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3835mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
Greetings
Click to expand...
Click to collapse
Was the phone in ruu mode (black screen + silver htc logo)?
Sent from my HTC One using XDA Labs
alray said:
Was the phone in ruu mode (black screen + silver htc logo)?
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
Done, thanks.
Update in minutes to confirm succesful flash.
Stefanot04 said:
Done, thanks.
Update in minutes to confirm succesful flash.
Click to expand...
Click to collapse
Edit: Perfect. Thanks
Hello everyone .
i have HTC sprint firmware & i want to flash UL firmware & receive OTA
i came by many FAQs , Posts & threads & ended up with even more confusion than i've already had
Phone details :
locked bootloader with stock recovery
S-off
Rooted
Stock firmware
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.02.20.0922
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.03.651.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4020mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.188s
-Do i have to change the MID to PN0710000 using commands in THIS THREAD and run UL RUU directly or what !!
as mentioned :
-HTC_Europe MID:
enter the following:
adb shell
su (if needed to get a # prompt)
echo -ne '\x50\x00\x4e\x00\x30\x00\x37\x00\x31\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p6 bs=1 seek=16384
exit
adb reboot bootloader
fastboot getvar mid (or getvar all)
verify PN0710000 for modelid
fastboot reboot
Click to expand...
Click to collapse
and is it significant to follow upgrade sequence (e.g from 5 to 7 ) do i need to flash 6 or not ? i'm on 5.03.651.3
what are the correct steps to upgrade & to change to UL ?
You cannot change a Sprint device to UL the partitions are different.
You can however flash any rom that has Sprint support.