Guys, please help me regarding my device, i've recently flashed the PAC rom by nims, my instruction for me of one of xda members, {go to cwm/mount and storage/format data and format system/wiped data and wipe cache partition/and flash} every thing's fine and booted, but when i've change my mind want to go back to my edited rom, i'm just stuck on galaxy ace logo.... but when i flash again PAC rom.. success, others rom wont boot up.. someone help me please
sorry for my english
Try flashing stock
Sent from my GT-S5830 using xda app-developers app
Which other ROM have you tried? And did you follow the same procedure as you did with the PAC ROM?
King ACE said:
Which other ROM have you tried? And did you follow the same procedure as you did with the PAC ROM?
Click to expand...
Click to collapse
THANKS for response guys, i have managed to revive my ACE, i just downloaded a fresh ROM and flash it, i dont know whats happened last night.. maybe its because i've formated the system and data in mounts and storage at CWM..
Hi guys !
I tried to install Sami OS and I had problems after rebooting , I got stuck with the Samsung Galaxy logo. I tried to wipe cache and data after that but didn't work.
Someone can help me ?
Salgii said:
Hi guys !
I tried to install Sami OS and I had problems after rebooting , I got stuck with the Samsung Galaxy logo. I tried to wipe cache and data after that but didn't work.
Someone can help me ?
Click to expand...
Click to collapse
If you come from CM10.2 or CM11 first flash stock firmware with Odin.
You need to install first V1 then V1.1
shut_down said:
If you come from CM10.2 or CM11 first flash stock firmware with Odin.
Click to expand...
Click to collapse
Always remember that I made this just for these things
Inviato dal mio GT-I9070
Salgii said:
Hi guys !
I tried to install Sami OS and I had problems after rebooting , I got stuck with the Samsung Galaxy logo. I tried to wipe cache and data after that but didn't work.
Someone can help me ?
Click to expand...
Click to collapse
What Rom that you come before ?
Give the detail condition of your device before for better solutions
Yes,I come from CM 10.2. Thx guys , I'll try Tesla-MADAL93's guide and I hope it works fine.
Hi I Updated My cm11 to new cm11 update 20140405 and then reboot and boot loop and no enter to recovery menu just enter to downloading mod.
please help my data and app is very important
...same problem for me...
Hey
U can try to use philz recovery..flash via Odin..
Can't guarantee anything but worth a shot..
Best of luck..
Sent from my GT-I9300 using xda app-developers app
This is how I recovered it.
amir_vulture said:
Hi I Updated My cm11 to new cm11 update 20140405 and then reboot and boot loop and no enter to recovery menu just enter to downloading mod.
please help my data and app is very important
Click to expand...
Click to collapse
Exactly had the same problem, followed the instruction here and was able to recover it and 20140405 is up and running again!
Best of Luck!
Mt Everest said:
Exactly had the same problem, ... and was able to recover it and 20140405 is up and running again!
Click to expand...
Click to collapse
Confirmed.
Only flashed Semaphore 3.4.3 with heimdall, as advised in official development thread [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S.
Did the job for me, therefore kudos to the guys over there.
That will teach me to read devel-thread before upgrading, hehe ...
hello guys,
its been about 2 years since i touched my galaxy s advance . unfortunatly i dropped my nexus 4 from 3 stories and its dead . and my back up is s advance so i want to upgrade software its been awhile so i dont know what to do anymore. but for now its running co-core 7 and the rom is aosp vanilla(4.1.2) i guess it is running twrp 2.6.0.0 so i saw new kitkat roms but iam wondering if i need to use 2.7.0.0 twrp inorder to do that and please tell me how if i have to do it and please suggest me active development rom running kitkat and active dev kernel thx in advance.
or if possible refer me to a link please explain me in detail as it isnt nexus to do stuff easy.
sujith1994 said:
hello guys,
its been about 2 years since i touched my galaxy s advance . unfortunatly i dropped my nexus 4 from 3 stories and its dead . and my back up is s advance so i want to upgrade software its been awhile so i dont know what to do anymore. but for now its running co-core 7 and the rom is aosp vanilla(4.1.2) i guess it is running twrp 2.6.0.0 so i saw new kitkat roms but iam wondering if i need to use 2.7.0.0 twrp inorder to do that and please tell me how if i have to do it and please suggest me active development rom running kitkat and active dev kernel thx in advance.
or if possible refer me to a link please explain me in detail as it isnt nexus to do stuff easy.
Click to expand...
Click to collapse
SGSA has no seperate recovery. The recovery is in the same partition as the kernel. So you can't replace recovery without replacing kernel.
But you can try to install a custom rom from TWRP 2.6.0.0.
If you want to have TWRP 2.7.1.0 install universal kernel flasher, flash slimkats kernel and reboot to recovery.
But then you have to install a rom because your JB system won't start with a KK kernel.
Hi guys,
just finished building TWRP 3.0.2-0 for the Z5
Download
TWRP-for-CM (folder)
recovery_3.0.2.img (fastboot flashable file)
Source:
https://github.com/omnirom/android_bootable_recovery (TWRP, recovery - place in bootable/recovery-twrp)
https://github.com/CyanogenMod (CyanogenMod source)
https://github.com/Sony-Kitakami (place in .repo/local_manifests )
Build:
Code:
source build/envsetup.sh
lunch cm_sumire-userdebug
mka clobber && mka recoveryimage RECOVERY_VARIANT=twrp
Thanks to @moonbutt74 for bearing with me and all my questions :silly:
Not Working on E6633 , When I power on the device , Sony logo show and the device power off immediately
Edit :
It works Successfully , I had flashed It as a kernel hahaha
Thank You ^_^
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Sh4douw said:
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Click to expand...
Click to collapse
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Sh4douw said:
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Click to expand...
Click to collapse
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Sony guy said:
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Click to expand...
Click to collapse
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Sh4douw said:
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Click to expand...
Click to collapse
Click here to download the rom
http://forum.xda-developers.com/xperia-z5/development/rom-cyanogenmod-13-sony-xperia-z5-t3356163/page11
And Gapps you can find it in the first page of the above thread
Okay, I don't understand why, but for booting on CM, I had to reflash the kernel !
Without it, my device power off one second after the Sony logo
It finally works, thanks you
Hi,
Are you able to make one for the Z5P??
some of us are still stuck at ver 2.8.
also, i have used your root kernel program with the lastest twrp and it can boot into recovery,since i am using a custom kernel, i think it will be nice if there is a flashable img file for the latest twrp.
Many thanks in advance.
Will this work with my new Z5, Android 6.0.1, totally stock?
Nayibmc said:
Will this work with my new Z5, Android 6.0.1, totally stock?
Click to expand...
Click to collapse
No. Just Cm/Aosp
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth?
Sergeyra29 said:
How can amplify the sound in Bluetooth?
Click to expand...
Click to collapse
Faux sound setting in Kernel Adiutor is not working(im on Z5 RR latest build plus Zach's kernel), but it working on Romaur 4.2.0 plus Aur-kernel 4.0.
try "FauxSound app v1.5" from play store, its worked with wired headset, maybe worked with Bluetooth too.
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth mixer_paths?
Sorry wrong reply. XD
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
adize said:
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
Click to expand...
Click to collapse
1 - fastboot flash recovery x.img
2 - I think this recovery is for CM ROM
You can search in the android development section for stock ROM , it works on all firmwares
Hi guys, noob question here: I have twrp old version, can I flash this in recovery?
And also I want to try the xz rom but tried flashing and didn't work, it is my understanding that it was caused by the old twrp and using this I'll be able to use that rom.
Thank you for your help.
Sent from my E6653 using XDA-Developers mobile app
[emoji41]
oh, sorry, wrong thread