Following this guide:
http://forum.xda-developers.com/ver...s980-resources-bootstacks-unofficial-t3050777
when I try to download : https://pvzwmdmcdn.vzw.motive.com/firmware/LG_VS980_27A_TO_28A.bin nothing happens,
As as always thanks in advance
Related
my acer liquid s100 is unable to reboot this was happen when i was updating my phone to 2.2 froyo, unfortunately there was sudden power cut and it is not rebooting, is there any solution regarding this please let me know.
worry not..
use the ACER a1 dl tool and flash latest .BIN file tht is found on modaco.com !
link for acer a1 dl tool : uploading.com/files/e696bc64/A1_DL_Tool3.1_j%2540y.rar/
here is the link for .BIN file : hotfile.com/dl/80920716/d4ef8d0/4.002.08_EMEA-GEN1_05.01.05_A1_PASS_MdB.zip.html
make sure u have installed all the drivers (found in cd provided along with phone, or get from :loadbalancing.modaco.com/download.p...deaga2n2d0pn68v )
1. extract the a1 dl tool and run the application as 'run as administrator'
2. connect ur phone to the pc.
3.after opening, click on browse and select the .BIN file that u have downloaded (hotfile link,dnt ask were is the bin file, extract the .zip file to find it )
4.and finally, click start & grab a cup of coffee/tea
last step : HIT THANKS
CHEERS !
find me here for further help : facebook.com/jaykrishna94
hi jay. krishna how are you
how to rebook my phone it's dead complete then how can i boot with out on the phone please help me
thank you
So, i rooted my original galaxy tab p1000 with odin3-v1.8, but when im in clockwork mod, and i want to install roms or WHATEVER thing i choose, i get an error similar to E: can't mount. Whether i try to clear cache or reset, it says this and i have no choice. It seems like a brick....ANYONE Help me, Much will be appreciated.
It seems like it was not rooted correctly. Did you run titanium backup after rooted?
Can u tell us what was the latest working firmware u had? FROYO,,GB? 2.2, 2.3.3, 2.3.6?
Anyways, Follow these steps carefully to fix almost all kind of softbrick:
1a. Download Fus Check Downloader 2.1 on your computer from url]http://fus.nanzen.se/[/url] , start it up and and downloaded a Firmware for your region. It will automatically decode the .enc2 file to.zip file
1b. Download this pitfile from following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
1c. Download this dbdata from the following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
2. Extract the .zip file generated from decoding file to a folder and I got tar.md 5 file.
3. Start Odin - put the .md5 to PDA
Put the pitfile from step 1b to the PIT
Check repartition. Leave everything else as is.
4. Go to download mode on the G-tab, connect to ur computer
and click start on Odin. It takes about 6 to 7 minutes to do the flashing.Once done flashing it will reboot but mostlikely you still have problems with your tab.
5. on your Odin, put the dbdata file from step 1c to PDA, leave everything else as is.
Reboot your tab to download mode, connect to computer, and click start on Odin.
6. Once done, reboot to recovery mode, do a factory reset wipe, and data cache wipe.
Reboot again, wait for about 5 minutes for the tab to boot, you should be all set.
Thx
yappoe said:
It seems like it was not rooted correctly. Did you run titanium backup after rooted?
Can u tell us what was the latest working firmware u had? FROYO,,GB? 2.2, 2.3.3, 2.3.6?
Anyways, Follow these steps carefully to fix almost all kind of softbrick:
1a. Download Fus Check Downloader 2.1 on your computer from url]http://fus.nanzen.se/[/url] , start it up and and downloaded a Firmware for your region. It will automatically decode the .enc2 file to.zip file
1b. Download this pitfile from following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
1c. Download this dbdata from the following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
2. Extract the .zip file generated from decoding file to a folder and I got tar.md 5 file.
3. Start Odin - put the .md5 to PDA
Put the pitfile from step 1b to the PIT
Check repartition. Leave everything else as is.
4. Go to download mode on the G-tab, connect to ur computer
and click start on Odin. It takes about 6 to 7 minutes to do the flashing.Once done flashing it will reboot but mostlikely you still have problems with your tab.
5. on your Odin, put the dbdata file from step 1c to PDA, leave everything else as is.
Reboot your tab to download mode, connect to computer, and click start on Odin.
6. Once done, reboot to recovery mode, do a factory reset wipe, and data cache wipe.
Reboot again, wait for about 5 minutes for the tab to boot, you should be all set.
Click to expand...
Click to collapse
Seems like the problem for me was resolved by following these instructions:
http://www.thegalaxytabforum.com/in...gingerbread-p1000xxjq1-p1000xxjq1-p1000xxjpz/
Thank you for your help too,
i have seen people on xda with bricked galaxy ace in which they cannot factory reset, they cannot flash successfully with odin and iether /system or /data is corrupted. they cannot factory reset properly without errors. I think this may be a universal solution for gt-s5830i (do not flash with s5380) other variants may work but i cannot garentee:
requirements:
usb cable
windows 7
galaxy ace
samsung usb drivers
ability to get into recovery and odin
step 1:
download files below
step 2:
enter download mode and plug your phone in
step 3:
download attached odin and run as admin
step 4:
download and extract http://www.mediafire.com/?903oq9l7qbmkir4 (firmware) passcode: Mod2extreme.com
OR
download all attatchments at the bottom of this post
step 5:
run odin as administrator
step 6:
attach files extracted from step 4 IN THIS ORDER!
1. bootloader
2.pda
3. phone
4. csc
5. pit file from odin package
step 7: making sure keis is not running, flash and dont touch anything!!!
step 8: if reboot with sound you should be fine if not reboot pc and try again
all credit goes to feetsonfire for providing files! hope this helped, if not the problem may not be the same!!
Have you search on development or general section ? There is no need of this thread. Everyone knows this. Next time search and then post.
Hit thanks if I help
Sent from cooperve.
Hi!
Unfortunately, this thread is useless! When I saw it i thought it was an alternate fix.
There are several threads about restoring a frimware via ODIN. Please search before you post.
Also, you are kindly requested to read the Forum Rules.
Thanks,
Teddy
This is for those who tried to flash Tizen via Odin when you had Null rom installed like me.
If this sounds like you too, then follow this guide and you should be ok.
Very important to remember.
You had to have been Running Null ROM when you attempted to install Tizen through odin.
If not I am not sure how to fix the issue or if this guide will work for you or not.
DOWNLOAD THE ATTACHED FILES AT THE END OF THIS POST FIRST
THE LINKS BELOW IS TO GIVE CREDIT TO THE OP AND THEIR AUTHORS
#####################################################
# Guide/Tutorial by: Roketteere from www.XDA-Developers.com #
# #
#####################################################
ORIGINAL FILE/S CREDIT TO THE FOLLOWING XDA MEMBERS:
::: ijonhyuni :::
- Downgrade Files (Step 1 and 2)
Original Link:
http://forum.xda-developers.com/showthread.php?t=2776157
::: radekklamzynski7 :::
- Tizen Update (Step 3 MD5)
Original Link:
http://forum.xda-developers.com/showthread.php?t=2767465
--------------------------------------------------------
Intructions (FOLLOW THEM!!!)
This is for those who have/had Null ROM and soft bricked their
galaxy gear one V700
It may work for any other kinds of issues but I only tested this
on my device.
I installed Null and tried to update to Tizen using Odin and the
update tar/md5. I ended up with a pain in the [email protected]#%[email protected]#^ soft brick.
Here we go!
(!!!)
Step 1 - Open odin from odin folder
Step 2 - Uncheck "Auto Reboot" from odin and select the pit button. Go into step one and select the pit 1 file.
Step 3 - Select the AP button and go into step 1 and open the
step 1 tar file.
Now your Device should be stuck on download mode if you are
having the same issues as I did.
If you are not in download mode then you will not be able to
follow this guide. If your device is just rebooting or something
other than stuck on download mode, then I would look somewhere
else for help. Sorry :/
Step 4 - Make sure you plug your device using the cradle, then
hit start.
Once it finishes, let it completely power on. it will look weird
and you may or may not think its back up and working and try
to stop reading my help guide here. DONT DO IT!!! JUST KEEP READING AND BE PATIENT!!!
Now AGAIN this guide was for those who had Null and tried flashing
Tizen via odin to update and failed like me.
I say this again because if you didnt have Null I am not sure you will be able to get ADB Debugging to work. If you do please post
it so we know you twig.
Step 5 - Open the Oopsiiieess Folder and open the file called
"CommandPrompt.bat"
That should open up command prompt. If not open command prompt
and the type "cd" without quotes, then hit the spacebar then go the where the folder "Null ROM To Tizen..." is and open that up. Then drag and drop the "Oopsiiieess" folder into command prompt and hit enter.
You can test that you did this right by typing:
adb devices
as long as you did this right you should now see your gear serial
and at the end of that it should say recovery.
As long as it does continue. If not Then you don't have access to
adb and you have done all of the following for nothing...Sorry good luck to you my friend!
Ouch mean!
Or check to make sure your device is properly connected.
Now
Step 6 - :
Type
adb reboot download
Step 7 - (as long as it rebooted to download)
hit the reset button in the button of the Odin app.
Then select the pit from part 2, then select AP and select the tar
from part 2.
Step 8 - Hit start on odin
When thats finished go ahead and let it reboot and do the same thing as step 6 again. Not step 7.
Once in download mode again....
Step 9 - Hit reset again in odin
- Hit the AP button, select the file from Step 3.
Hit start and wait for it to finish. This may take a way so go
use the bathroom, let the dogs out, or just sit there and wait...
I did, sit there and wait...My dogs did not like that...
um thats it. You should now have a working Tizen Gear One...
-The END!!!
Download Files Are Here
Click the link to download the files
DOWNLOAD
Hi,
do you know how to exit download mode please?
thank you
edit : it's done now : same thing as entering in download mode