Database Develop

[Q]

Hi everybody,
I got a big problem. First of all, i'm not english, but it dont matter.
Next, i've recently ( october ) Root and Flash my phone, and installed the SGSIII Rom. My roommate have take my phone and have put the wrong code 55 times(genius) and now i can't turn on my phone ! It's locked on the " S III " screen .. So i need your help. I'm a noob, like says the video
And I don't nknow what to do. I think i should use a " recovery " but i'm not sure of the meaning of " recovery " so I'm stucked..
Really need your help guys
EDIT : I forget one thing, i just want to back up my phone to the normal version .. No root, no flash, i got blackmart alpha so whyr oot ? x)
Exen

Switch off ur phone. Now, press HOME+POWER buttons together. The screen you will see after that is known as "Recovery".
However, if you want your phone normal as before (no root) then, firstly, you need STOCK FIRMWARE of YOUR COUNTRY. Also, be careful... if your phone has 'i' or some alphabet after model name (such as: Galaxy Ace 5830i) then you need 5830i firmware.
REMEMBER:- 5830i is not same as 5830(without 'i').
Sent Via XDA™ Premium

Thank you for your answer.
I've found a stockfirmware of Europe ( i'm french so i hope it's ok ) for android 2.3.3 ( my version of android ) called S5830XWKPO.
What should I do ?

If you remember your (previous) stock firmware version & you are sure that now you have the correct firmware for your specific device model, then search on GOOGLE for firmware flashing methods for your model. You may also find plently of them here on XDA too. You can also find as many video tutorials on youtube.
Firmwares are generally of two types:- full package(contains 4 files) & one package(contains two files). You can extract the downloaded firmware file to ensure whether it is "full" or "one package". You need Odin.exe to flash firmware & an "ops" file.
... & PC (ofcourse...)
& By the way... what was that "wrong code" you are referring to??
Sent Via XDA™ Premium

I've find the correct version firmware for my phone, that is ok. But, i put it on my SD Card and my phone can't detect it .. When i turn it up with HOME + POWER buttons, i go on " install .zip from SD card " and i can't see the file .. I'm a bit stucked.
Ok, to make that my phone back to factory leaving ( excuse for bad english xD ) i must Re-flash it ? Like a normal flash, but with this firmware ? And after, must I unroot it ?
EDIT : Ok, i've put the .zip file on my SD card, and i select : " install zip from sdcard " , after " choose zip from sdcard " and at least i select th S5830XWKPO file and i push home. it launch the installation and says :
-- Installing: /sdcard/S5830XWKPO.zip
Finding update package...
Opening update package...
Installing update
Installation aborted
And i dont now why it aborts.. Maybe because it's the wrong file ? I really need help i'm a bit lost in all of those firmwares, continents and all of that x')
Thanks for help dude

Read the tutorials, to flash a firmware you need a pc and odin.
Recovery is for installing custom roms.

exen29 said:
I've find the correct version firmware for my phone, that is ok. But, i put it on my SD Card and my phone can't detect it .. When i turn it up with HOME + POWER buttons, i go on " install .zip from SD card " and i can't see the file .. I'm a bit stucked.
Ok, to make that my phone back to factory leaving ( excuse for bad english xD ) i must Re-flash it ? Like a normal flash, but with this firmware ? And after, must I unroot it ?
EDIT : Ok, i've put the .zip file on my SD card, and i select : " install zip from sdcard " , after " choose zip from sdcard " and at least i select th S5830XWKPO file and i push home. it launch the installation and says :
-- Installing: /sdcard/S5830XWKPO.zip
Finding update package...
Opening update package...
Installing update
Installation aborted
And i dont now why it aborts.. Maybe because it's the wrong file ? I really need help i'm a bit lost in all of those firmwares, continents and all of that x')
Thanks for help dude
Click to expand...
Click to collapse
No No Bro!!... You can't flash it from your phone. Transfer that S5830...zip file to computer & extract it. Then open Odin.exe & place appropriate files in the concerned fields.
For one package f/w installation, tick the option "one package" in odin screen, then place that single ".tar.md5" file under One Package field.
However, if you got full package, you need to place those files in appropriate fields.
(Just search about flashing processes on google.com to know how exactly it's done.)
[]*Remember:- To flash stock firmwares you need to have pc & phone drivers & only custom roms can be flashed through CWM recovery(via phone)*[]
Hope this helps...!!!
Sent Via XDA™ Premium

[Q] Dear friend please help me

yesterday i got micromax a250 canvas for update 4.4 . according to below method i flashed the phone successfully. everything ok no errors. after update phone wont power on. sometimes only charging no power. once it was on when logo appear become freezed. i am in big trouble now ? please explain me to solve this problem.
a) You need to download Rom and SP Tool from above link.
b) Download AND Install MTK Drivers.
c) Reboot your PC.
d) Unrar S9311_MP_IN_MMX_15_flasher_user.rar and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder S9311_MP_IN_MMX_15_flasher_user and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch off Your Phone. Make sure you have sufficient battery charged or use laptop to do this. (Do NOT connect phone to PC)
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder S9311_MP_IN_MMX_15_flasher_user.
i) Wait file to be added into Flash Tool.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmware download.
m) Now connect phone.
n) Software start downloading.
o) After few minutes you will see big green circle.
p) Done. Boot your phone.

wasimbai said:
yesterday i got micromax a250 canvas for update 4.4 . according to below method i flashed the phone successfully. everything ok no errors. after update phone wont power on. sometimes only charging no power. once it was on when logo appear become freezed. i am in big trouble now ? please explain me to solve this problem.
a) You need to download Rom and SP Tool from above link.
b) Download AND Install MTK Drivers.
c) Reboot your PC.
d) Unrar S9311_MP_IN_MMX_15_flasher_user.rar and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder S9311_MP_IN_MMX_15_flasher_user and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch off Your Phone. Make sure you have sufficient battery charged or use laptop to do this. (Do NOT connect phone to PC)
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder S9311_MP_IN_MMX_15_flasher_user.
i) Wait file to be added into Flash Tool.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmware download.
m) Now connect phone.
n) Software start downloading.
o) After few minutes you will see big green circle.
p) Done. Boot your phone.
Click to expand...
Click to collapse
Update 4.4 ?? You mean Android 4.4 KitKat for your Canvas Turbo ?? Do you mean that ?? Please let me know in detail from where you downloaded those Flash tool and all other files for your Canvas Turbo.

how to increase more performance in it.....because i am getting hang in im phone..

Android 4.4 update is not available yet for any Micromax phone...

[Q&A] [MOD] Extend Phone Storage Micromax Canvas Turbo A250

Q&A for [MOD] Extend Phone Storage Micromax Canvas Turbo A250
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Unable to do any thing with Flash tool
Unable to do any thing with flash tool
giving error "EBR1 checked without path"
having
1) C:\Users\abc\Downloads\SP_Flash_Tool_exe_v3.1312.0.139\SP_Flash_Tool_v3.1312.0.139\MTK_AllInOne_DA download agent
2) MT6589_Android_scatter_emmc.txt on desktop path
Also installed Mobistel_Cynus_T1_Drivers_x86.exe
Steps followed
1) Shut down phone
2) Connect the phone while it is off
3) Selected Download agent as MTK_ALL_IN_ONE... DA.bin
4) Selected MT6589_Android_scatter_emmc.txt as scatter-loading file
5) check EBR1 and Press download .. error recieved "[Hint] EBR1is checked, but without path!"
how to proceed pls help.
Regards,
Ajit

AjitSBakshi said:
Unable to do any thing with flash tool
giving error "EBR1 checked without path"
having
1) C:\Users\abc\Downloads\SP_Flash_Tool_exe_v3.1312.0.139\SP_Flash_Tool_v3.1312.0.139\MTK_AllInOne_DA download agent
2) MT6589_Android_scatter_emmc.txt on desktop path
Also installed Mobistel_Cynus_T1_Drivers_x86.exe
Ajit
Click to expand...
Click to collapse
Steps followed
1) Shut down phone
2) Connect the phone while it is off
3) Selected Download agent as MTK_ALL_IN_ONE... DA.bin
4) Selected MT6589_Android_scatter_emmc.txt as scatter-loading file
5) Uncheck all options less EBR1 and EBR2
6) Set path to EBR1 and EBR2
7) check EBR1 and Press download .. error recieved "[Hint] EBR1is checked, but without path!"
how to proceed pls help.
8) Connect phone to USB
8) Wait for the green circle

drivers requirement
Any drivers required because it shows on searching and searching for long time and nothing happens

Of course you need drivers
Driver download links:
If you are using 32 bit- http://click.xda-developers.com/api...ww.mediafire.com/download/hl...rivers_x86.exe
If you are using 64 bit- http://click.xda-developers.com/api...xplay.ru/download/firmware/m...honeDriver.rar
Sent from my Micromax Canvas Turbo A250 using XDA Premium App

it works..thank you XDA

I too followed all ur steps..... The internal sd card became corrupt.... then i did factory reset... but still the phone memory is same as b4...

warranty will void
Hello Nrupesh,
Will after extending internal memory space warranty will void or not . . . and i have to reinstall jelly bean

How to start Micromax A250 in Recovery Mode
Hi,
I am trying to increase app memory of my A250 to 4GB. Process says to start phone in recovery mode. Can someone pls guide me how to do this as I am new to this area.

The phone isnt being detected.
Hey ,
I was trying to extend the phone storage like you said , but the other files are not being detected like the figure shows . I tried switching the phone on and off but its still not getting detected. Can you please point me to the right direction ?
Big thank you !

Thank you !
FSadino said:
Steps followed
1) Shut down phone
2) Connect the phone while it is off
3) Selected Download agent as MTK_ALL_IN_ONE... DA.bin
4) Selected MT6589_Android_scatter_emmc.txt as scatter-loading file
5) Uncheck all options less EBR1 and EBR2
6) Set path to EBR1 and EBR2
7) check EBR1 and Press download .. error recieved "[Hint] EBR1is checked, but without path!"
how to proceed pls help.
8) Connect phone to USB
8) Wait for the green circle
Click to expand...
Click to collapse
Thank you ! I was able to extend the phone storage thanks to you !

Can't take backup of my system
The thread to extend internal storage is excellent. I have some problems following the steps however.
I use micromax canvas turbo A250
1. I have problems backing up my system via CWM recovery. (problem - can't mount /data) - because I have encrypted my internal storage
2. Can I proceed with S.P. Flash tools to extend storage without taking this backup? If yes then how?
Please explain. I'm a real noob.

Download isn't started at all
i have done all the steps mentioned but nothing happened after download button selected.
Can you help me on this, Do i need to root the phone to make it working?

HC185040 said:
i have done all the steps mentioned but nothing happened after download button selected.
Can you help me on this, Do i need to root the phone to make it working?
Click to expand...
Click to collapse
You need to install drivers first

Download isn't started at all.
Tried by installing the drivers as well but no difference, can you please share the required drivers for WIN 8 So that i can try with those if anything to with drivers which i have installed.

help
S9311_MP_IN_MMX_15_flasher_user folder/zip links has been removed
plz help me by providing another link
i really need to increase my phone's internal memory.

Steps not working
Hi I have followed all the steps but after connecting the phone in switched off mode it is not recognizing and starts charging the phone.
on the sp tool it gets stuck on searching..... please help.
drivers have already been installed....
phone is already rooted....

Micromax turbo
Hey,
Thanks for the post.But I struggled a lot for getting scatter file for micromax turbo A250.I would be very grateful to someone who can provide me that?

To get sactter-file, download any stock rom from here
http://forum.xda-developers.com/can...-darkfull-turbo-a250-explay-dream-05-t2896624

Not downloading
I've Micromax Canvas Turbo A250... I want to expand my internal storage...I've done all the steps mentioned but the ebr files are not at all downloading...I'm a new user to this flash tool... But it doesnt show the location of all files as given in the same pic...Its not getting downloaded too...Please explain this task in detail...

Unbrick lg lte 2 f160 lsk qhsusb_dload no recovery no download mode

I brick my lg f160k while flashing wrong kdz on it. It was in no download no recovery mode. Pc was showing qhsusb_dloade 9008. I searched alot over the internet to unbrick it but found nothing except a thread on veitnam site by a veitnamis developer. Thanks to him for this useful thread. With the help of this i unbrick my cell. It was very difficult to understand the thread while in Vietnam's language but i managed to do so with the help of google translator. I thought i should must share it on xda to English community for easy umderstading. Hit thanks if you get your phone back. And many thanks to veitnamis developer too....
1. Download the qualcom drivers and install it from given link.
https://app.box.com/s/5n42md550n4oxne04xttfz788cp0i4i3
Open device manager and ensure that you have correctly installed qualcom 9008 drivers. Remember the com port
2. Download and unzip this folder
https://app.box.com/s/zvvj2v87csuwmv93k7ztzevuiytyd0fi
You shall have a tool Boar Diag v3.99c folder and two folder named S and L.
3.IMPORTANT. You will have to choose folder S For F160K and S and for F160L and LV choose Folder L.
4. Now run the tool.
Check the 2 points on tool
1.Ap check
2.Emmc Test
In Ap chipset choose board
For F160s and F160k
D1L(MSM8960 SKDA)
FOR 160L
D1L(MSM8960 LV)
Select Com Port shown in device manager of your computer.
In TARGET DIR Choose the Folder of Named S or L according to your modal, As i told you earlier in step 3
Rest all should be unchecked
PRESS START
https://app.box.com/s/hr8y0cmzcond0jciemprl5jzr4rllggn
Now test will start and will take 10 seconds to complete
If this test run successfully AP and EMMC should show pass on tool window
5. In this step Now only uncheck
Emmc Test and then check the
Boot Image Restore and select ABOOT from drop down menu.
Only w points Checked.
Ap Check
Boot Img Restor
Rest all should be uncheck the same as in previous step.
PRESS START
https://app.box.com/s/w1r560py2bm2wwlbtch9bn7kh1bski2u
Now it will Test the AP CHECK and will write Boot image to your mobile.
It will take 10 to 15 seconds.
After successfully completion of this test you ll see download mode on your mobile. Or you may see an LG logo with a secure boot massege.
Important...
STEP 6 was not mentioned in orignal thread. I did this at my own and got my result.
6. If you dont see download mode or LG logo after completing step 5 even successfully completion shown ion tool, As in mine case on F160k. Then try step 5 with AP CHIPSET with D1L(MSM8960 RR&G)
rest same selection.
AND PRESS START.
I hope this will resolve your issue. As i did.
7. NOW ITS TIME TO FLASH LATEST KDZ FIRMWARE ACCORDING TO YOUR MoBILE Phone.
.
THATS ALL WHAT I HAVE FOR MY FRIENDS.
IF I HELPED YOU THEN PLZ PRAY FOR ME. THANKS ALOT

Thank you for providing the files! I have a bricked LG LTE2 F160K, which mode should I put the phone be?
My phone can still access download mode, and when I try to start up the tool, it just says "Failed during loading flash programmer"

bro if your download mode is working then you will have to flash kdz of your modal for f160k I think its 20k. you can find the latest kdz many sites. google it lg firmware you can find it on vietnam site lgviet.com

this programe is only for qhsusb_delod mode. no download no recovery state. if you have download mode then kdz is the way to unbrick

Help! "device was not found in dload trying flash programmer" i get this error

What kind of brick you have? Its qhsusb bulk mode. Then this guide will help you

what is "ion took"??
there are no "D1L(MSM8960 RR&G)" in the selection

muzammil457 said:
What kind of brick you have? Its qhsusb bulk mode. Then this guide will help you
Click to expand...
Click to collapse
test completed but my phone didn't enter to download mode
the driver name when i connect my LG is"QHSUSB_QLOAD"

why yu no reply??

Have you installed qualcm drivers first? If no then do it if yes then in board ap choose msm8960 it will work. But if doesnt then there is 1 more 8960 selection try that

Does this method works for a sony xperia ion which has the same problem????

ahamedlaheer said:
Does this method works for a sony xperia ion which has the same problem????
Click to expand...
Click to collapse
This programe is for qualcom devices. If your experia is qualcom based then it will work. But u need to find the files to flash doe your modalm I have loaded only f160 system files.

muzammil457 said:
Have you installed qualcm drivers first? If no then do it if yes then in board ap choose msm8960 it will work. But if doesnt then there is 1 more 8960 selection try that
Click to expand...
Click to collapse
yes i install it, i tried the other msm8960 but it doesn't work

Test point to force qhsusb-dload in LG F160s
mcycharles said:
Thank you for providing the files! I have a bricked LG LTE2 F160K, which mode should I put the phone be?
My phone can still access download mode, and when I try to start up the tool, it just says "Failed during loading flash programmer"
Click to expand...
Click to collapse
Dear all,
Can some one provide me the details of test points for LG F160s i want to force it, as m phone in dead alsmost,,,
i will b very thankful
Rizwan

Why u need to do that if u r not in hard brick state?

muzammil457 said:
I brick my lg f160k while flashing wrong kdz on it. It was in no download no recovery mode. Pc was showing qhsusb_dloade 9008. I searched alot over the internet to unbrick it but found nothing except a thread on veitnam site by a veitnamis developer. Thanks to him for this useful thread. With the help of this i unbrick my cell. It was very difficult to understand the thread while in Vietnam's language but i managed to do so with the help of google translator. I thought i should must share it on xda to English community for easy umderstading. Hit thanks if you get your phone back. And many thanks to veitnamis developer too....
1. Download the qualcom drivers and install it from given link.
https://app.box.com/s/5n42md550n4oxne04xttfz788cp0i4i3
Open device manager and ensure that you have correctly installed qualcom 9008 drivers. Remember the com port
2. Download and unzip this folder
https://app.box.com/s/zvvj2v87csuwmv93k7ztzevuiytyd0fi
You shall have a tool Boar Diag v3.99c folder and two folder named S and L.
3.IMPORTANT. You will have to choose folder S For F160K and S and for F160L and LV choose Folder L.
4. Now run the tool.
Check the 2 points on tool
1.Ap check
2.Emmc Test
In Ap chipset choose board
For F160s and F160k
D1L(MSM8960 SKDA)
FOR 160L
D1L(MSM8960 LV)
Select Com Port shown in device manager of your computer.
In TARGET DIR Choose the Folder of Named S or L according to your modal, As i told you earlier in step 3
Rest all should be unchecked
PRESS START
https://app.box.com/s/hr8y0cmzcond0jciemprl5jzr4rllggn
Now test will start and will take 10 seconds to complete
If this test run successfully AP and EMMC should show pass on tool window
5. In this step Now only uncheck
Emmc Test and then check the
Boot Image Restore and select ABOOT from drop down menu.
Only w points Checked.
Ap Check
Boot Img Restor
Rest all should be uncheck the same as in previous step.
PRESS START
https://app.box.com/s/w1r560py2bm2wwlbtch9bn7kh1bski2u
Now it will Test the AP CHECK and will write Boot image to your mobile.
It will take 10 to 15 seconds.
After successfully completion of this test you ll see download mode on your mobile. Or you may see an LG logo with a secure boot massege.
Important...
STEP 6 was not mentioned in orignal thread. I did this at my own and got my result.
6. If you dont see download mode or LG logo after completing step 5 even successfully completion shown ion tool, As in mine case on F160k. Then try step 5 with AP CHIPSET with D1L(MSM8960 RR&G)
rest same selection.
AND PRESS START.
I hope this will resolve your issue. As i did.
7. NOW ITS TIME TO FLASH LATEST KDZ FIRMWARE ACCORDING TO YOUR MoBILE Phone.
. THATS ALL WHAT I HAVE FOR MY FRIENDS.
I have F160L.i tried same as u mention,All proceger complete but no download mode no fastboot mode no LG logo.What to do now?still on qualcomm 9008
Click to expand...
Click to collapse

Hello all
If after restore aboot phone not power on
Need restore all this file: about, Backupgpt, boot, dbi, laf, Primarygpt, recovery, rpm, tz, sdl1, sdl2, sdl3 (one by one, not MIX!!!) and after restore last sdl3 power turn on!

muzammil457 said:
I brick my lg f160k while flashing wrong kdz on it. It was in no download no recovery mode. Pc was showing qhsusb_dloade 9008. I searched alot over the internet to unbrick it but found nothing except a thread on veitnam site by a veitnamis developer. Thanks to him for this useful thread. With the help of this i unbrick my cell. It was very difficult to understand the thread while in Vietnam's language but i managed to do so with the help of google translator. I thought i should must share it on xda to English community for easy umderstading. Hit thanks if you get your phone back. And many thanks to veitnamis developer too....
1. Download the qualcom drivers and install it from given link.
https://app.box.com/s/5n42md550n4oxne04xttfz788cp0i4i3
Open device manager and ensure that you have correctly installed qualcom 9008 drivers. Remember the com port
2. Download and unzip this folder
https://app.box.com/s/zvvj2v87csuwmv93k7ztzevuiytyd0fi
You shall have a tool Boar Diag v3.99c folder and two folder named S and L.
3.IMPORTANT. You will have to choose folder S For F160K and S and for F160L and LV choose Folder L.
4. Now run the tool.
Check the 2 points on tool
1.Ap check
2.Emmc Test
In Ap chipset choose board
For F160s and F160k
D1L(MSM8960 SKDA)
FOR 160L
D1L(MSM8960 LV)
Select Com Port shown in device manager of your computer.
In TARGET DIR Choose the Folder of Named S or L according to your modal, As i told you earlier in step 3
Rest all should be unchecked
PRESS START
https://app.box.com/s/hr8y0cmzcond0jciemprl5jzr4rllggn
Now test will start and will take 10 seconds to complete
If this test run successfully AP and EMMC should show pass on tool window
5. In this step Now only uncheck
Emmc Test and then check the
Boot Image Restore and select ABOOT from drop down menu.
Only w points Checked.
Ap Check
Boot Img Restor
Rest all should be uncheck the same as in previous step.
PRESS START
https://app.box.com/s/w1r560py2bm2wwlbtch9bn7kh1bski2u
Now it will Test the AP CHECK and will write Boot image to your mobile.
It will take 10 to 15 seconds.
After successfully completion of this test you ll see download mode on your mobile. Or you may see an LG logo with a secure boot massege.
Important...
STEP 6 was not mentioned in orignal thread. I did this at my own and got my result.
6. If you dont see download mode or LG logo after completing step 5 even successfully completion shown ion tool, As in mine case on F160k. Then try step 5 with AP CHIPSET with D1L(MSM8960 RR&G)
rest same selection.
AND PRESS START.
I hope this will resolve your issue. As i did.
7. NOW ITS TIME TO FLASH LATEST KDZ FIRMWARE ACCORDING TO YOUR MoBILE Phone.
.
THATS ALL WHAT I HAVE FOR MY FRIENDS.
IF I HELPED YOU THEN PLZ PRAY FOR ME. THANKS ALOT
Click to expand...
Click to collapse
any other link for qualcomm drivers?

Link is fine. U can download it from google.

Need some Help
My phone goes to Service Mode but not in Download mode.
Should i try this method?
And how i can find out my phone is S OR K OR L originally hardware based
Waiting for your answer .
My phone is dead since 1 month

Micromax canvas A1 bricked, pls help!!!

hi,
my micromax a1 was runnning marshmallow 6.0.1 when during a security patch update installation got stuck and failed to boot again. now just booting into "dead android with exclamation mark". upon pressing power button and volume up and going into recovery(Android stock recovery) menu , cant wipe partition or data as it throws error "E: failed to mount/ cache" errors..
upon trying to install with any SD card also throws same error.
then i tried to install through ADB, while connecting to PC , PC not detecting mobile in recovery mode but detecting in bootloader mode. with fastboot flash command (for installing TWRP/CWM) in bootloader mode, error coming as "sending recovery failed(unknown status code)" .
Kindly help...

same happened to me yesterday . do you find any solution ??

Hi there !
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
HIT THANKS IF HELPED
if link do not work here properly then just google 'canvas a1 stuck on startup' ... and follow link in associated with xda

Device is dead
My phone is neither switching on, nor charging.
I flashed the stock ROM due to some problem with the rooted device through SP Flash tools. It completed successfully, but the device is not switching on or charging.
KIndly help