Database Develop

Unable to find device in RSDLite

Hi guys, I'm using Motorola Milestone and my bootloader is 90.78. I opened RSDLite and plug in the phone in bootloader mode but my RSDLite is unable to detect my device.
I have already installed the motorola drivers. Anyone has any ideas?

bryant_16 said:
Hi guys, I'm using Motorola Milestone and my bootloader is 90.78. I opened RSDLite and plug in the phone in bootloader mode but my RSDLite is unable to detect my device.
I have already installed the motorola drivers. Anyone has any ideas?
Click to expand...
Click to collapse
Same issue here. I have bootloader 90.74. On my Windows 7 there's no way...
Drivers 4.1 and 4.6 tested...but no way...

Anyone has any ideas about this issue?

Weird problem :s Works fine on my Win 7 VM. You could maybe try to uninstall and reinstall the driver :/

Some people have issues with RSDLite on Windows 7 64 bits.
I used to have the same problem and finally I had to install it on my netbook which has W7 32 bits and it worked fine.
Did you managed to install it in an other computer ?

The latest RSDLite versions didn't worked for either but version 4.5.3 works good under Windows 7 for me!

I found a solution
Like the rest, I too had the same problem. Then I found out how to make it work by accident.
I am using RSDlite version 4.5.7 on Windows 7 (32-bit version).
This is what you must do.
Step 1:
Download Open Recovery Version 1.46 for Milestone from http://www.modmymobile.com/forums/downloads.php?do=file&id=28089
Step 2:
It is a rar file, so use any free software to extract out the contents of this OpenRecovery_v1_46_SHOLS.rar file to a new folder on your desktop.
After u have extracted it, look for a file called vulnerable_recovery.sbf. Copy out this vulnerable_recovery.sbf file to somewhere on your pc for example to the root of your C drive on your PC.
Step 3:
Download from this script to disable the recovery check for signed recovery menu (so that we can apply update.zip later) from
http://modmymobile.com/forums/attac...le-recovery-disable_recovery_check_by_ota.zip.
Unzip the file and there should be a file called Disable_recovery_check_by_OTA.sh
Step 4:
Copy the Disable_recovery_check_by_OTA.sh file to a sub folder called scripts that is within the OpenRecovery folder (which we have already extracted earlier) (eg. OpenRecovery\scripts).
Step 5:
Boot up the phone as per normal and then connect the phone to PC via USB cable
Step 6:
Change the USB Connection to Memory Card Accessl
Step 7:
Go to the desktop of your PC and open up the folder where the contents of the extracted OpenRecovery_v1_46_SHOLS.rar file is. You should then copy the update.zip to the root of your phone's SD card (eg. SDcard\update.zip).
Also copy the whole OpenRecovery folder also to the root level of your SD card (eg. SDcard\OpenRecovery)
Step 8:
Change the USB Connection to Portal & Tool. This is the trick that will allow RSDLite to detect your phone.
Step 9:
Launch RSDLite ver.4.5.7
Step 10:
It will take a few seconds for your phone to appear in the device list of RSDLite
Step 11:
Click on the "..." button and locate and open the vulnerable_recovery.sbf file which we have extracted earlier and had copied out to somewhere (eg. root of C drive).
Step 12:
Click on the "Start" button.
Step 13:
Immediately you would see something in the status progress of RSDlite. RSDlite will switch your phone to the Bootloader mode by itself.
Step 14: - Very Important Step
Pay attention to the status of the Bootloader on your phone. Halfway thru the progress of flashing the vulnerable_recovery.sbf, RSDlite will initiate a reboot of your phone.
When that happens, you must prevent the phone from rebooting into the normal Android mode and get it to boot into the Bootloader mode by quickly pressing & holding up on your D-pad in horizontal (landscape) position.
I would suggest that b4 RSDlite initiate the reboot, you should be prepared for it by sliding out the keyboard first and hold it in the horizontal (landscape) position and get ready to press up on the D-Pad.
by quickly turning your phone to the horizontal position (landscape) and press and hold up on the D-Pad of your phone. Hold the up key of your D-pad for about 3 to 4 seconds before release it and it should be now back in the bootloader mode.
Do not do anything yet. You will know when the flashing of the vulnerable_recovery.sbf is completed and successful when the result in RSDLite device list window says "PASS".
Step 15: - Also very important step
Once the flashing of the vulnerable_recovery.sbf is complete (after you see "PASS" in RSDlite), you may close RSDlite and then unplug the phone from the USB cable.
The phone is still in the bootloader mode. Now be prepared to boot into the recovery mode. This is very important. If you fail to boot into the recovery mode then you will have to repeat from Step 8
The technique that I use on my Motorola Milestone to boot into the recovery mode is by using the 3 button technique. I press the "x" key + power button + camera button together at the same time and hold it until the recovery mode icon appears which is a an exclamation mark within a triangle.
Step 16:
While in the recovery mode, slide the keyboard back in. Then press and hold the volume up button first and then press the camera button once and when you see the recovery menu you can quickly release the volume up button.
Step 17:
Slide the keyboard out. Use the D-pad to navigate. If you are holding the phone in vertical position, then to navigate up and down the recovery menu, just press up or down on the D-pad. To confirm your selection, press down on the middle of your D-Pad.
Using your D-Pad, scroll down to the part it says "apply sdcard:update.zip" and press the middle of your D-Pad to select it.
You should see something packages being downloaded to your phone which is part of the installation process of the Motorola Milestone Open Recovery Menu which is not the stock Recovery Menu.
Step 18:
Once you are in the Motorola Milestone Open Recovery Menu, scroll down to the option that says "Run Script". Select that option.
Step 19:
Then you should be able to see a list of scripts and one of them should be "Disable_recovery_check_by_OTA.sh". Select that script.
Step 20:
Once that "Disable_recovery_check_by_OTA.sh" has been applied, the phone will no longer check for signed recovery menus like this Motorola Milestone Open Recovery Menu when ever you go into the stock recovery menu to "apply sdcard:update.zip". This means you can install different types of "Open Recovery Menu" for different custom roms for Motorola Milestone.
Besides using this Motorola Milestone Open Recovery Menu, I have also tried the following 2 "Open Recovery Menu" on my Milestone:
1) Androidiani OpenRecovery 3.3 - http://forum.xda-developers.com/showthread.php?t=796679
2) G.O.T OpenRecovery (for installing G.O.T custom FROYO rom) - http://groupoften.wordpress.com/g-o-t-s-openrecovery/
Important Note:
Before you start to install custom roms please do a Nandroid back up of your phone in case something goes wrong during the installation of the custom rom, you can restore your phone back to stock rom.
The Nandroid back up and restore option is available within all 3 "Open Recovery Menu" mentioned above.

I have Windows 7 Ultimate 64-bit and I use Motorola USB Drivers 4.7.1 and RSD Lite 4.9. So it would be good to download these versions, which are the latest. If this wont work, do a factory reset on your Milestone.

Solution for HIDEN.IMG error at Lollipop in 910H

Step One
- Download script zip file from http://forum.xda-developers.com/showthread.php?t=2446269
-Unzip the zip file in a folder
Step Two
-Extract recovery.img file from Lollipop firmware N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar and copy recovery.img to folder made in Step One. (How to: See Post 5) Thanks @picaboodre for your graphical tutorial.
Step Three
- Open folder made in Step One and launch the "ImgToTar.MD5.bat". CMD window will open in computer and after sometime CMD window will close automatically. After then there must be recovery file with tar.md5 extension
Step Four
- After getting HIDEN.IMG fail error, disconnect phone from computer and pull out battery from phone for 5 second
- Insert the battery in the phone and go to download mode manually (Volume Down+Home+Power)
- Connect phone to computer and launch Odin 3.09
- After detecting phone by Odin, put the recovery file which made in Step Three in AP/PDA
- Ensure that Repartition is not Checked
- Press Start in Odin
- After successful flashing of recovery, phone tends to restart, promptly press Volume UP+Home button and phone goes to Stock Recovery. Do Wipe Cache Partition and Restart the phone.
- That’s it. Enjoy Lollipop

It worked
Thank you, It really worked and now I've lollipop in my note 4 (original CSC TPA)

Having this same error and following your steps. Can you explain in a little more detail how to perform STEP 2 please. Thanks in advance.

Problems creating recovery file
I extract the file downloaded.
Transfer the ROM to the same folder where the file was downloaded.
Launch ImgToTar.MD5.bat
CMD window open.
Create a YES_FILE
**********************************
No recovery file was created. Any assistance will be gladly appreciate it.

SM-910H Hidden.img FAIL Steps
Figured out to how to get this to work, and it works like a charm. For all those like myself who are/were experiencing the Fail at the Hidden.img in odin, follow these steps.
1. Download 7zip and install it.
2. Right click N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar and select "open with" 7zip (you may have to browse for it)
3. Select the recovery.img file
[/IMG]
[/IMG]
4. Press extract
[/IMG]
[/IMG]
5. Browse to a folder you created to place the extracted file.
[/IMG]
[/IMG]
6. Copy extracted recovery.img file
[/IMG]
[/IMG]
7. Paste recovery.img in C:\**************\tar-Tool_Odin3-v3.07_by_mkh.mourad
[/IMG]
[/IMG]
8. Double click ImgtoTar.MD5.bat
[/IMG]
[/IMG]
9. Select the output file recovery.tar.md5 when in ODIN using the AP/PDA button after you get the Hidden error message fail in ODIN
[/IMG]
[/IMG]
---------- Post added at 11:40 PM ---------- Previous post was at 11:34 PM ----------
vijras said:
Step One
- Download script zip file from http://forum.xda-developers.com/showthread.php?t=2446269
-Unzip the zip file in a folder
Step Two
-Extract recovery.img file from Lollipop firmware N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar and copy recovery.img to folder made in Step One.
Step Three
- Open folder made in Step One and launch the "ImgToTar.MD5.bat". CMD window will open in computer and after sometime CMD window will close automatically. After then there must be recovery file with tar.md5 extension
Step Four
- After getting HIDEN.IMG fail error, disconnect phone from computer and pull out battery from phone for 5 second
- Insert the battery in the phone and go to download mode manually (Volume Down+Home+Power)
- Connect phone to computer and launch Odin 3.09
- After detecting phone by Odin, put the recovery file which made in Step Three in AP/PDA
- Ensure that Repartition is not Checked
- Press Start in Odin
- After successful flashing of recovery, phone tends to restart, promptly press Volume UP+Home button and phone goes to Stock Recovery. Do Wipe Cache Partition and Restart the phone.
- That’s it. Enjoy Lollipop
Click to expand...
Click to collapse
Just saying a huge thanks for this once again man. Worked like a charm.

worked great
I love you #nohomo

Hi every one.
I want to know what the information showing on the odin page means.
any one knows?
thank you all

Knox
Hi.
This procedure does not change the Knox ?

help
i did what you did my phone is n910h and no matter which samsung rom i flash it wouldnt work it will show me the logo and reboot and again and again but it boots up well when i flash cm based roms i dont what is the problem? i think that happened after i tried flashing 6.0 custom samsung rom [eRobot_Note4_ROM_6_0_1_V_1_XXU2DPCB_Aroma.zip] coming from cm rom so im stuck on cm :crying::crying::crying: please help

No probs bro

Back to emui 8.0 stock

I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Huawei Multi-tool
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.

Thanks, man. You are really helpful...
---------- Post added at 06:01 PM ---------- Previous post was at 06:00 PM ----------
Could you upload the Huawei multi tool in any other platform. Mega.nz is not responding.

Will this relock the bootloader?

Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting

AnantNigam said:
Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting
Click to expand...
Click to collapse
To lock bootloader.. go to the bootloader tab in multitool and there you can find an option as lock bootloader for that you will need the same unlock code that u used to unlock the bootloader in the first place.. follow the instructions which is given in the app.. its simple

hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.

Praveen Jeykar said:
hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.
Click to expand...
Click to collapse
Just follow every step from my tutorial and you won't have any problem.

How to unroot honor 9i?

sir my honor 9i not working
sknoman1 said:
I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.
Click to expand...
Click to collapse
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number

yogeshyadavv143 said:
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number
Click to expand...
Click to collapse
did you follow the exact procedure?
if you have missed a single part that give you the exact message as no os installed

Hi guys, really sorry to ask, but how do I install Multi Tool on Mac OS? Thanks in advance!

This will work on Nova 2i? As this is same as Honor 9i.

[GUIDE] How to return to Stock/Flash Images with QFIL

Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download either of the firmware from here
Download the support files (Firehose/rawprogram0.xml/patch0.xml) here
Extract the firmware and support files to the same folder so you can easily access them like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash individual partitions you can edit your rawprogram0.xml to only include the ones you want. (patch0.xml stays the same) I have linked below 2 examples, one of them flashes just a boot.img and one that just flashes the recovery.img. But you aren't limited to those.
Recovery
Boot

Mine just in case

Awesome, thanks for this post! it will really help us in upcoming projects!

Managed to revive my phone using the B12 files but it crashes after completing system.img, I think the problem is userdata.img, my phone boots but I lost the imei and I don't know how to get it back, I'm still trying.

ZTE 971 not recognized by either QPST or QFIL
Thanks for all the detailed instructions. But my ZTE 971 is not visible to either qpst or qfil eventhough the phone shows in windows 8.1. In the Developer Options menu, I noticed Select USB Configuration, RNDIS (USB ethernet) option cannot be enabled. I wonder if this has anything to do with it. OEM unlocking, USB debbugging are already selected. Any suggestions, please? Thanks.
ps. I live in Turkey. I got this phone last year from AT&T and have unlocked the sim.

My PC is not detecting my ZTE MAVEN 3
I have installed all drives but still facing the issue. I am using it on Windows 10.

I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.

Mega says that link for the driver is invalid, but the driver is included in your QPST download anyway.

000Nick said:
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Click to expand...
Click to collapse
solucionaste hermano
Mod edit:
you solved brother
Click to expand...
Click to collapse

it says qhsusb_bulk when I connect the the software is not working in the mobile and it is stuck at bootloader screen but I used the press both buttons to go to edl mode method and it said in the device manager a device connected with name : qhsusb_bulk
help pls

Hello All.
I am not able to get the following files
rawprogram.xml and patch.xml for LG G8x​Please help me to get this files ASAP as i have hard bricked the mobile, all partitions deleted

[GUIDE][QFIL] FLASHING QFIL IMAGES [YU Yureka Black]

Procedure For Flashing/recovering your Garlic using QFIL/QPST Tool
REQUIREMENTS :
-A working PC.
-Qualcomm Drivers.
-QFIL Tools (I'd prefer and recommend ver2.0.05 as it is much more efficient than the newer ones) *Required .Net Framework 4.5 or higher
-ADB Drivers (just in case if your phone ain't bricked and you don't know how to boot into edl mode)
-N/M Full Firmware files (No the N-Firmware or M-firmware files provided by me).
-Back up your internal storage as this would wipe the internal (I prefer it this way)
-If you are using the QFIL 2.0.05, then you should install the tool.
-Extract the Firmware file and copy it to <directory where you installed qfil>/Qualcomm/bin/ this is to avoid sahara failed error.
-In simple words, keep the extracted firmware files inside the QFIL's folder.
-Connect your phone to PC and type in adb reboot edl in adb terminal to boot into EDL mode, or reboot edl in terminal emulator.
-If you have installed all drivers properly, your phone should be listed under Ports in Device Manager as Qualcomm Diganostic Device xx9008 (note this number, this is important) if your are getting 900E or 9003 (in case of bricked phone) you need to make it boot into 9008 mode using Deep Flash Cable (Guides to this will be provided soon, or you could just refer Google).
PROCEDURE :
-Open QFIL Tool.
-Once the phone is connected in EDL mode, it will show up under the ports (automatically selected, still if for any reason, open up and select port)
-Select Flat Build.
-Select the Programmer Path. It will open up the file browse window, go to the location where you have extracted the firmware and select Programmer_emmec_firehorse file.
-Select Patch File and select raw_unspare.xml file.
Now select Patch.xml.
-Click Download Button and flashing process will begin. Wait till it finishes and hold down your power button to boot your phone.
DOWNLOADS :
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul

pritish1998 said:
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul
Click to expand...
Click to collapse
Can you reupload Stock N Qfil?

Rose in YU YUREK∆ BL∆CK - TINNO p7201 | OFFICIAL
Tap here to view all notes in this chat.
t.me
user74354 said:
Can you reupload Stock N Qfil?
Click to expand...
Click to collapse