Database Develop

Relock your Xperia Pro MK16a/i post bootloader unlock and SEUS update fail

Hi all,
So you have unlocked the bootloader of your Xperia Pro MK16a/i and rooted it too.. You got a notification for a newer software to be available and you downloaded an over the air update, installed it, the phone says that it needs a reboot and to your surprise the phone doesn't turn on.
The symptoms for this problem are:
1. The phone vibrates for half a second when you press the power button and does that in a never ending loop
2. The green led keeps blinking when you press the power button.
This is not some method that i had developed but i just found a thread in a Japanese website and after struggling with the google/microsoft translation, i thought it would be better to help all the other users and not face all the struggles that i went through.
How to bring your phone back to life without the help of a Sony Ericsson service center? Keep reading.
Things that you need to have/check before beginning the process.
1. An Xperia Pro MK16a/i with the symptoms mentioned above
2. A USB cable
3. Flashtool
4. SEUS Software (which has been used for at least once for your phone)
5. Patience
First off, just rush to the SEUS installation folder in your PC to this path
C:\Program Files\Sony Ericsson\Update Service\db\13740270\blob_fs
Look for a file named FILE_278020564 in that folder.
If yes, continue reading.
If no, i'm not sure if the files from other users work. Experts need to help regarding this matter.
Copy the file FILE_278020564 to any location that you wish
Download the software ConvertTool and copy and place the file FILE_278020564 into the ConvertTool folder and then drag and drop the file onto the file SeusDecrypt.bat
A .tgz archive of the FILE_278020564 will be made in the same folder. Now extract the .tgz archive created (Use 7zip archiver to extract the file)
A .tar file will be created now. Now rename that file as loader.sin
Now Extract the file Xperia Pro Relock bootloader.zip to another location and copy and replace the loader.sin file in the folder with the loader.sin that you just renamed.
Now its time to repackage the file so that it can be flashed onto your phone.
Download and install Flashtool software (you can easily find it, just Google it) and in the software go to Advanced>Bundle creation
Now select the folder Xperia Pro Relock bootloader, you'll be able to view the two files (loader.sin and preset.ta) in the folder list of Flashtool software.
Select each file and then click on the -> to move the files into Firmware Content, type in the details in the tabs above.
Device: MK16a (or) i [whichever phone yours is]
Version: 4.0
Branding: A.2.335 [Don't ask me why we need to type in these details because i do not know, experts can help if its not mandatory]
Click on Ok in the flashtool software and a .ftf file would now be created in the path shown below
C:\Flashtool\firmwares
Example: MK16a_4.0_A.2.335.ftf
Now Open the Flashtool software once again and click on the Flash icon and enter into Flashmode and the software lists out the firmwares in the firmwares folder of its installation. Select the file MK16a_4.0_A.2.335.ftf and then leave everything as default and press OK.
Do as the software asks you to do.
1. Unplug the device
2. Power off the device
3. Press the back button and hold it
4. Plug the USB cable.
The software shall recognize the phone and flash the relocked bootloader into the phone file system. The phone would not work now.
For the phone to work, you need to update your phone normally using SEUS and it would let you do an update without any The phone software has been modified and cannot be updated error. (I would prefer a Factory settings+Update mode of update)
Note: In case the flashtool doesn't detect your phone, you need to install PC companion software in your PC. Hopefully it installs the USB drivers necessary to detect your phone.
After the update is done, restart the phone and it should normally boot like it was in the box when you bought. Happy Ending..
This method is not mine and all credits goes to Mydroidn. I'm just translating for the benefit of others. Thanks for your help bro. You're awesome!

Or you can use this and enable OTA updates with unlocked bootloader without brick the device
http://forum.xda-developers.com/showthread.php?t=1385725

gracias me funciono genial

Relocking xperia Pro
hey i found this on internet and want to know if it is working or not ???
http://www.sonyericsson-world.com/t...l-xperia-qsd8250-msm7227-msm8255-smartphones/
please help i want my sony firmware back xD

Unable to reboot

my acer liquid s100 is unable to reboot this was happen when i was updating my phone to 2.2 froyo, unfortunately there was sudden power cut and it is not rebooting, is there any solution regarding this please let me know.

worry not..
use the ACER a1 dl tool and flash latest .BIN file tht is found on modaco.com !
link for acer a1 dl tool : uploading.com/files/e696bc64/A1_DL_Tool3.1_j%2540y.rar/
here is the link for .BIN file : hotfile.com/dl/80920716/d4ef8d0/4.002.08_EMEA-GEN1_05.01.05_A1_PASS_MdB.zip.html
make sure u have installed all the drivers (found in cd provided along with phone, or get from :loadbalancing.modaco.com/download.p...deaga2n2d0pn68v )
1. extract the a1 dl tool and run the application as 'run as administrator'
2. connect ur phone to the pc.
3.after opening, click on browse and select the .BIN file that u have downloaded (hotfile link,dnt ask were is the bin file, extract the .zip file to find it )
4.and finally, click start & grab a cup of coffee/tea
last step : HIT THANKS
CHEERS !
find me here for further help : facebook.com/jaykrishna94

hi jay. krishna how are you
how to rebook my phone it's dead complete then how can i boot with out on the phone please help me
thank you

Hp salte 7 voicetab sptool flash ok

HI
sorry my bad English
i have share successfully flash hp tab sate 7 voicetab
with sp flash tool
how to flash
Unpack FlashTools, and Click on Flash_tool.exe
Select a the MT6582_Android_scatter.txt in ROM
Wait file to be added into Flash Tool
choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
Turn off your tablet.
"Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear after color purple, yellow.
And green circles display
Finish !
download flash file & flash tool
here flash file
here is tool

needrom asks for premium access, do you have a file saved on google drive ?

Micromax canvas A1 bricked, pls help!!!

hi,
my micromax a1 was runnning marshmallow 6.0.1 when during a security patch update installation got stuck and failed to boot again. now just booting into "dead android with exclamation mark". upon pressing power button and volume up and going into recovery(Android stock recovery) menu , cant wipe partition or data as it throws error "E: failed to mount/ cache" errors..
upon trying to install with any SD card also throws same error.
then i tried to install through ADB, while connecting to PC , PC not detecting mobile in recovery mode but detecting in bootloader mode. with fastboot flash command (for installing TWRP/CWM) in bootloader mode, error coming as "sending recovery failed(unknown status code)" .
Kindly help...

same happened to me yesterday . do you find any solution ??

Hi there !
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
HIT THANKS IF HELPED
if link do not work here properly then just google 'canvas a1 stuck on startup' ... and follow link in associated with xda

Device is dead
My phone is neither switching on, nor charging.
I flashed the stock ROM due to some problem with the rooted device through SP Flash tools. It completed successfully, but the device is not switching on or charging.
KIndly help

[GUIDE][QFIL] FLASHING QFIL IMAGES [YU Yureka Black]

Procedure For Flashing/recovering your Garlic using QFIL/QPST Tool
REQUIREMENTS :
-A working PC.
-Qualcomm Drivers.
-QFIL Tools (I'd prefer and recommend ver2.0.05 as it is much more efficient than the newer ones) *Required .Net Framework 4.5 or higher
-ADB Drivers (just in case if your phone ain't bricked and you don't know how to boot into edl mode)
-N/M Full Firmware files (No the N-Firmware or M-firmware files provided by me).
-Back up your internal storage as this would wipe the internal (I prefer it this way)
-If you are using the QFIL 2.0.05, then you should install the tool.
-Extract the Firmware file and copy it to <directory where you installed qfil>/Qualcomm/bin/ this is to avoid sahara failed error.
-In simple words, keep the extracted firmware files inside the QFIL's folder.
-Connect your phone to PC and type in adb reboot edl in adb terminal to boot into EDL mode, or reboot edl in terminal emulator.
-If you have installed all drivers properly, your phone should be listed under Ports in Device Manager as Qualcomm Diganostic Device xx9008 (note this number, this is important) if your are getting 900E or 9003 (in case of bricked phone) you need to make it boot into 9008 mode using Deep Flash Cable (Guides to this will be provided soon, or you could just refer Google).
PROCEDURE :
-Open QFIL Tool.
-Once the phone is connected in EDL mode, it will show up under the ports (automatically selected, still if for any reason, open up and select port)
-Select Flat Build.
-Select the Programmer Path. It will open up the file browse window, go to the location where you have extracted the firmware and select Programmer_emmec_firehorse file.
-Select Patch File and select raw_unspare.xml file.
Now select Patch.xml.
-Click Download Button and flashing process will begin. Wait till it finishes and hold down your power button to boot your phone.
DOWNLOADS :
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul

pritish1998 said:
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul
Click to expand...
Click to collapse
Can you reupload Stock N Qfil?

Rose in YU YUREK∆ BL∆CK - TINNO p7201 | OFFICIAL
Tap here to view all notes in this chat.
t.me
user74354 said:
Can you reupload Stock N Qfil?
Click to expand...
Click to collapse