Kindle Fire HD brick - 7" Kindle Fire HD Q&A, Help & Troubleshooting

Hello,
my Kindle (Tate-PVT-08) starts with the yellow kindle logo and then switches to the fastboot screen. Without any action the screen gets black again and it's in a loop. ( the PC always gets a signal as it is coneccted with a usb device). It is possible to install recovery.img, system2.img and boot.img with the fastboot comands -i 0x1949 flash ...
but however after flashing the fiels the kindle goes back in the same mode as described at the beginnning.
Can anyboy help me to recover my device?
Thanks a lot

Related

trying to fix

I have a fire hd 7", that I messed up.
It is stuck on the "Kindle Fire System Recovery" screen.
I got a fastboot cable & when I plug it in I see the fastboot logo.
I am not sure how to procede.
I am still quite new at this & I am using a mac.
One problem I think I am having is that adb does not recognize the device.
You use fastboot commands in fastboot mode.

Boot into Fastboot mode und screen turned black

Hey,
i booted my Kindle with FireFlash into Fastboot Mode. After that i wasn't able to boot normaly. The Device always boote into Fastboot.
Then I tryed to reboot with the command fastboot -i 0x1949 reboot.
Now i have the problem that the Kindle boot into Fastboot for 2 Seconds. Then the screen turned black. Windows loose and get the connection in turns.
Any Idea? :/
I'm guessing your kernel needs to be reflashed if it's going into fastboot repeatedly, though I was a bit confused from the typo the rest of what happened.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
i just solved the Problem with the Fastboot... Now i see the Kindle Fire boot logo und than the device turns off and on and off and on...theres nothing i can do x.X
OK I'm guessing you need a fastboot cable to fix it at this point so you can attempt to reflash it again.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

[Q] Kindle fire HD 7 tate fastboot loop

Hello to everybody, I'm new to this forum. thanks foe the useful informations I've been abler to gather on this website.
Yesterday arrived the fastboot cable I ordered.Pluggin it it it turned the kindle to fastboot mode.
Fastboot on my pc recognised the devide in cmd window.
After a couple of fastboot instructions attempting to reload bootloader and TWRP recovery without success, the kindle started to plug and unplug itself every second.
on the screen either if you use a normal usb calbe or the fastboot cable it appears the kindle logo, then the fastboot logo for 1 second then everything desappear and with the black screen starts endelessy to plug and unplug.
It seems fastboot doesn't find any device whine on program amanger it is correclty recognised by the system.
Any help would be very appreceated.
Thanks in advance, Stef
Just unplug the fast boot cable while the screen is black also could you pm me a video of your predicament? That could help

Kindle Fire HD 7 (2012) Boot loop

I was attempting to fix an issue with a family members stock Kindle Fire HD 7 (2012). Since I wasn't having any luck with the stock reset I was attempting to load TWRP so I could just load the latest amazon stock ROM that way. I followed the instructions from CMs website but at the end instead of booting to recovery I did a fastboot -i 0x1949 reboot. Now I'm stuck at the yellow Kindle Fire screen and it just loops over and over. I have a motorola fastboot cable but I've issued the fastboot -i 0x1949 getvar product and it just says waiting for device.
What are my next steps to get out of the bootloop?
Now that the battery has died I now can't even get the device to boot. Any ideas?

Kindle hd7 Tate 2nd gen

My Kindle Fire HD& Tate 2nd gen is stuck in a fastboot bootloop. When I turn on kindle I get Kindle fire logo for a second then immediately get fastboot kindle fire logo then screen goes black and when I connect normal usb lead I can hear kindle connecting and disconnecting to pc this goes on and on with black screen.
I used kindle fire utility to check fastboot status with option 4 then I connect fastboot cable and on pc it says waiting for device >product: Tate-PVT-08 finished. total time: 0.109s Fastboot is enabled.Press any key to continue . . .But I can not get it out of the fastboot bootloop.....I have tried this in command prompt fastboot -i 0x1949 reboot then sats waiting for device then I connect normal usb lead and it says rebooting but then just comes back to the Kindle fire logo for a second then immediately then fastboot kindle fire logo and once again goes through connecting and disconnecting issue...
I have also tried disconnecting battery for a few minutes and get same result,also tried a couple of times each holding power for 20,30,40,50,60 seconds then let go wait a couple of seconds then press power again,but with all of them it still goes back to Kindle fire logo then fastboot kindle fire logo and once again goes through connecting and disconnecting issue...any help appreciated as to how to get it out of this fastboot loop
update on this I managed to restore using cmd prompt and Kindle_fire_HD_7(backup 7.2.3+root).zip...
Happy again
Update even better news I have now managed to install twrp recovery and Cyanogenmod 12.1 on it and its running smooth...

Categories

Resources