the solution of this error is simple.
just install proper qualcomm drivers from latest qpst setup . cause it includes the drivers too.
now just short the name of firmware folder to short form.
now open qpst or qfil, select firmware folder and select
rawprog_emmc_ufs_firehose_Sdm660_ddr.elf
then rawprogram unspare no nfc no fsg.xml '
then patch0. xml file
after that this is the main thing.
press vol + and vol- buttons together and put it into edl mode
and now connect it to the pc with cable . don't do anything till qpst or qfil not recognize it byself.
it took 30 sec to recogniz for my time.
it will take more for you may be. now download button will become available .
just click on it and now flashing will start without any error .
i was getting this error cause i was putting the device edl mode and connecting it to pc before opening of qfil or qpst.
you had to connect it after opening the qfil or qpst then you will not get any shara errror.
and have to wait at least 30 sec don't do anything till then . and after that windows will sound of connecting and that's it.
start flashing without shara error.
another solution:-
Copy firmware folder (imges) into
cdrive/programmer files/qualcomm/QPST/bin
2- Than open QFIl Select Programme Files .mbn
then both .xml Files From Cdrive where U copy
3- Now Close QFIL
4- Now Connect Handset Into Quacomm Mode (hs-usb , edl , download etc )
5- Open QFIL Again
Already Post Selected
6- Now Press Download
SUCCESS
latest qpst download from this site:-https://androidmtk.com/download-qpst-flash-tool
also try this in offline mode like remove all internet connection or wifi disable or enable airplane mode on your pc or lapto
Can post a link of QPST that you used
DJ AJB said:
Can post a link of QPST that you used
Click to expand...
Click to collapse
still getting shara error which version of winodws you using
if using windows 10 disable driver signature enforcement first then install qualcomm drivers perfectly included in qpst
after that open qfil or qpst now select all files and after that boot device in edl mode and connect it now to the pc rember dont connect with pc before qfill or qpst open now with usb cable wait for atleast 40 sec if it get recognize . download button will become available ,just click on it and start flashing
Thanks a lot it has successfully finished
When I do this I always receive:
2021-07-13 14:27:51.932 Download Fail:FireHose Fail:FHLoader Fail: process fail
Can someone give me any advice?
I also included my log.file
I waited for long, i had to selec the port as it says
im lost
Hello!
2 pcs P20 Pro (now servicing). Tested 10 and 9 version, not read OTG (in system or in recovery).
Now offline (not PC) update from SD available only... this phone not support SD-Card! Only OTG-SD.
-Attached 3 other USB-OTG converter cable (1pcs new, 1pcs 20x used)
-Attached pendrive (exFAT, FAT32, NTFS)
-Attached SD (exFAT, FAT32) in Kingston USB-SD converter
Pendrive LED not on: not readed.
Tested OTG cable to other USB device, 5V ok, Data line voltage ok: USB all 4 pin ok!
Tested OTG cables other older droid 5.1 phone, all working, SD readed with converter, pendrive readed correctly.
One P20 Pro bricked. Bootloader locked, fastboot mode available only (screen blank), Multi-Tool flasher/unbricker "stock service flash" downloaded to phone and failed (no write permission). Hisuite not support this phone recovery. No other method to unbrick, only SD-update. How to working this port?
Live system not read OTG and bricked system not read OTG.
Live system developer mode settings (*#*#2846579#*#*) changed to default, Manufactture, Hisuite, same. Developer software upgrade: 1. Memory card, 2. APK standalone, not available OTG/USB. Connected to PC: Photo mode, File mode and Charging mode available only (not available reverse charge).
USB port measurement: not powered live system, booting, recovery "update OTG mode" not powered the USB port!
1 phone= inside cable USB to mainboard bad? 2 phone= 2 cable bad??? Not real!
Charging ok. PC connection ok.
What is a problem???
Hey Looking Forward To Help You..
1.Go To "SETTINGS"
2.Search For "OTG"
3.Some Phones Like Eg.Oneplus Have OTG Option In the Status Bar Customisation Tab..
4.Use An Prober Cable [OR] See If It Works On The Other Phone..
5.Important The Drive/SD You're Using Doesn't Have Any Hardware Issues!
6.Best Thing Is Two Option.
A.Software Update.
B.Factory Reset - Data Loss [Not Recommended]
7.Or It Must Be an Hardware Issue Please Reach Out To The Nearest Mobile Service Centre.
Alwaya XDA Peace
Hello!
I'm writed: NEED TO BRICKED PHONE = no settings, no menu, no system. (1-2-3 point not relevant)
4-5 writed: tested other type phone with cable, SD, pen, all working. P20 Pro not powered OTG (no 5V out)!
6: not available
7. Display changed, back changed, not original phone, not free (guarantee) service. Service + old unrooted, locked bootloader phone, ... too
I'm used IDT to flash. Only have CLT-AL00A-BD_1.0.0.46 Board Software firmware. Flashed in testpoint mode. All upload ok. After power on:
Imei: 000000000000...
Model: unknown
EMUI: 3.1
Droid: 5.1
Only have test softwares this firmware. No browser, etc.
How to update normal version?
*#*#2846579#*#* menu, update sd (read to available dload/update.app), restart, read SD 1-2s, Update failed!
What is a good version for SD update? First 8.1 or latest 10?
HiSuite searching update, no update!
Restored phone with PC and USB.
Problem: The TWRP version.
Changed TWRP version to 3.3, OTG working, newer version (3,4, 3.5) unsupported OTG.
More function not work in old version (restore backed up system partition: error, etc.).
Mr. V. said:
Restored phone with PC and USB.
Problem: The TWRP version.
Changed TWRP version to 3.3, OTG working, newer version (3,4, 3.5) unsupported OTG.
More function not work in old version (restore backed up system partition: error, etc.).
Click to expand...
Click to collapse
Hi there,can you please help me out ?I have one Huawei P20 pro, that had a fall and the back was smashed in to pieces,also glass on the back that's covering the camera was broken.I have cleaned it up and replaced the back on it ,now it was really temperamental,as of you tap on it it will just restat itself,apart from that wa ok,soo I was thinking maybe software error,soo done a factory reset and now is stuck in boot loop.Is not powering on the android operating system.I have tried all the restoration methods that you had tried upper but can't make it load the android operating system....I even bought that small and card reader that you can plug in the charger port to try and install the operating system again ,but even of the led light on the card reader is on , doesn't do anything...any guidance?
Thank you!
departe said:
Hi there,can you please help me out ?I have one Huawei P20 pro, that had a fall and the back was smashed in to pieces,also glass on the back that's covering the camera was broken.I have cleaned it up and replaced the back on it ,now it was really temperamental,as of you tap on it it will just restat itself,apart from that wa ok,soo I was thinking maybe software error,soo done a factory reset and now is stuck in boot loop.Is not powering on the android operating system.I have tried all the restoration methods that you had tried upper but can't make it load the android operating system....I even bought that small and card reader that you can plug in the charger port to try and install the operating system again ,but even of the led light on the card reader is on , doesn't do anything...any guidance?
Thank you!
Click to expand...
Click to collapse
If not rooted, use PC with Hisuite official software.
If not communicated to phone, need to reflash manually. This is not free.
In DC-Unlocker site download 2 software + pay 3 day license for this softwares and use.
Bootloop and cracking not related!
Cleared chaches??? Not solve?
Done factory erase,done cache memory erase,done restart and just staying on the Huawei screen where is saying down at the bottom Powered by Android for few minutes and after that goes in to the white meniu where you can select factory reset,updates (tried the WiFi update is not connecting),now I got the firmware and Kiwibird 4 in 1 card reader that you can plug up the "ass " of the phone usingOTG hopefully I can install the firmware from there...I have downloaded the firmware and just putting it on the SD card...have you tried that way?
Firmware install not working "offline" mode.
TWRP and any other not read OTG, only live system.
Another problem: OTG only support FAT/FAT32, not supported NTFS, ExFAT (Live system: need Paragon software). The firmware file more than FAT32 filesize limit (2GB), only stored NTFS or ExFAT = FW file too large for FAT.
Your FW upload only 3 method.
1. Boot to recovery, and set ADB mode, download the FW zip to DLOAD dir (from PC with USB cable + ADB), and install. (NOT TESTED!)
2. Boot to recovery, and set wifi recovery. Connect to wifi AP, download latest downloadable FW and install. (NOT TESTED)
3. Paid method: DC-Unlocker & DC-Phoenix work with standard recovery (limited access) and work own uploaded recovery (self opened bootloader/virtual testpoint).
OTG/SD not option for FW update!
Thanks you for your time,and writing back to me,yes,good point with different types of partitions,I forgot about it...I did try the nr.2 method and is not working,it can't download anything,I have trying different wiFi points,not starting any download,it does connect to the WiFi but can't find anything to be downloaded.
First method is not going to work as I have no access to set ADB mode,only fastboot mode,and is displayed that phone is locked soo, bootloader is locked and can't open it...soo only method to try is theast one...but don't know how much will that cost me.
Also I am thinking of other people said that the battery can have a problem too as my battery is getting empty fast...also something strange maybe..but if you tap the phone on the upper side on the edge it's restarting itself...I am thinking to open it up and try like that as in the past had been dropped soo back glass and camera glass have been replaced,but was working,until I have done factory reset and the process got interrupted in the middle of it and that was it...since.then..Inhave tried reset, factory reset,wipe cache, nothing working.
The softwares for 3 day ~20$. The DC-unlocker site write correct actual price.
If bootloader not opened, only available FW-update in Hisuite Huawei official software.
Test in recovery mode or bootloader mode.
(My recovery is TWRP, not available recovery method. Your available.)
Test connect to phone this software! If yes, but not available firmware, need to use special VPN software. Download offline your phone firmware to PC, or set specified link to VPN soft and Hisuite: update available! (Need Hisuite downgrade for this VPN method.)
If this update not working, purchase 3day license.
Need offline firmware file for your phone.
Soft-bootloader open if not working, use testpoint. (The DC-Phoenix manual write the testpoint position.)
Start the process in PC, Short testpoint to GND and plug USB. (If need, install drivers.)
Started upload unlocked bootloader and unlocked old recovery. After finished, reboot to recovery. (Without accu, work end... after reboot only work with plugged accu.) (Not need unplug accu!)
After booted recovery, wait PC to identify recovery mode, and started download.
The download 2 part! 1= firmware, 2=cust file. Need all selecting!
The download automated. Please wait for 100%. After end, rebooted to system.
Check IMEI, phone signal, MAC numbers. All ok? End flashing.
Wrong or no IMEI, bad MAC? Need the second software.
The second software unlock bootloader, FRP lock, all lock.
Unlocking bootloader (not need): software say the unlocking number, phone boot bootloader, PC USB ADB (Fastboot) command need to write the code, phone question: yes? Is yes, rebooted to recovery and CLEAR ALL DATA! After cleraing, boot system.
All phone start displayed "Phone untrusted".
Unlocked bootloder = uploadable TWRP or any recovery, after not need testpoint to flash.
Root: only rootable 8.1 system. (Not tested 8.1+, bootloader code not readable.)
Hi there mate,I have manage.to fix my phone,just following an old post here,with one russian website,where I got the firmware,put it on the SD card ,by the way you can make it eXFat ,will work for larger sizes,mine was 128 GB,and had to reboot the phone in update mode but selecting OTG/SD and it worked first time!I manage to update it with Android 10.After that all good,done the updates up to 12.
Thank you for your support and time!
Have a great week!
8.1 (stock) System and recovery not compatibilie / not read ExFat.
I have 8.1 System (rootable). In 8.1 OTG/SD update not working.
Check your filesystems:
Code:
$ cat /proc/filesystems
...
msdos
vfat
exfat
...
(This is a different device.)
Yes, system ok... i was wrong.
TWRP recovery not read any OTG! Other version TWRP read OTG, and not read correctly system partitions (half phone not read).
Standard recovery not available for me to testing.
I recently found a way to fix missing imei, sim card related issues.
My problem was the dual sim. I'd insert a sim in sim 1 and sim 2, sim 2 would have no service.
I don't know if this works in other MI variants, it worked on my 2014812.RequirementsQFIL tool flash tool
Qualcomm Drivers
A brain
I will not be held sh!t if your device gets bricked.STEPSPut your phone in diag mode. Turn on usb debugging in developer options in custom roms, power off the phone, press and hold vol up and plug in your usb cable.
MIUI ROM users, dial *#*#717717#*#* or*#*#13491#*#*. if they don't work then search online
Open QFIL, make sure build type on META BUILD. Plug in your phone while in diag mode and click select port, it will show up.
Click tools and click QCN backup and restore.
Click on browse, find the file wherever you saved it, click on Restore QCN and let itflash.
Reboot device and everything will be fixed.
i will attach the file i used for the baseband.
And i've attached the link i used to download.LINKS
File QCN Xiaomi Hasil Backup UFI Box
Download,BI Only,Firmware SP Flashtool,firmware Android,Samsung,Xperia,Blackberry,Rapido,Crack,Tool Flasher,Cara,Trik Jumper,Matot,Tutorial,Deadboot
bocah-ajar.blogspot.com
ADDITIONAL INFORMATIONMy baseband version: MPSS.DPM.1 ... ANUZM-1.33887.1.41528.1
Cross check your Ram, Storage and baseband version to avoid hard brick.
Works on Windows 8/10/11.