Hi everyone, I am new to this forum and if my post is posted on the wrong area, please feel free to move it (and I apologize for any inconvenience)
so back to the problem that I have encountered: my S5 cannot power off properly after flashing G900F. I have an ATT S5 and I used towelroot to root, install Safestrap and did all the backup, setup a new rom kind of stuff. After that, I flash G900F to my phone (with all those wipe done correctly). My phone works perfectly fine but when I try to turn off my phone, it will do all the work but keeps in a black screen with the two button lights on. When I tried to turn on my phone then, it would not do so, so I believe it hangs at that black screen.
Did anyone encounter this before and know a way out? Every help is appreciated and sorry again if this post is in the wrong area.
Pete
Its a bug with safestrap. There's currently no fix other then a battery pull.
Longcat14 said:
Its a bug with safestrap. There's currently no fix other then a battery pull.
Click to expand...
Click to collapse
Thank you so much for your reply,
If you don't mind, please help me out on another problem: after doing all the process, my phone could not connect to my home wifi. It always got stuck at the "obtaining IP" process, is there a way that I could fix it as well?
Thank you so much for helping out this new guy!:good:
sincera4565 said:
Thank you so much for your reply,
If you don't mind, please help me out on another problem: after doing all the process, my phone could not connect to my home wifi. It always got stuck at the "obtaining IP" process, is there a way that I could fix it as well?
Thank you so much for helping out this new guy!:good:
Click to expand...
Click to collapse
I'm really not sure there. No custom ROMs would let me use WiFi when I flashed them.
Questions and Help issues belong in Q&A and Help section...thanks!
Thread moved
Have you got this phone in brick status and can't get a fix? ME TOO! I hope everyone with a brick of any type will come here and tell us how youbfixed it. Or ask how to fix. This is mostly for the optics l90 so please respect the tone! Hope this works.
My brick consists of the d415 stuxh on emcrytion screen with no adb or gastboor OR s.w update mode. It's on and I can hear it but it has that damn incryption screen
I will post mybresulys as I get scientific all on it.
What actually did you develop? Original brick?
whodisname said:
My brick consists of the d415 stuxh on emcrytion screen with no adb or gastboor OR s.w update mode. It's on and I can hear it but it has that damn incryption screen
I will post mybresulys as I get scientific all on it.
Click to expand...
Click to collapse
As I said in the other forum you no longer have a data partition. It is completely gone because the resize script doesn't completely work on the d415. The system partition cant access any data so it thinks that it is encrypted. This also happened to me.
I also previously mentioned if you can get to recovery I can help you.
You DO have either fastboot or software update mode enabled right now.
With your phone off hold the volume up bottom and then plug your cord into your phone and computer.
If it takes you to software mode then you will need to kdz reset your phone. This will also fix your partitions, but you will have to start from the beginning to get root, flash recovery etc.
If you can get to fastboot reflash a recovery from shinobis thread. Once you have a working recovery you will have adb access while in recovery.
I can help you use the same method I did using adb while in recovery.
Let me know where you get (fastboot or software update mode)
Sent from my LG-D415 using XDA Free mobile app
whodisname said:
Have you got this phone in brick status and can't get a fix? ME TOO! I hope everyone with a brick of any type will come here and tell us how youbfixed it. Or ask how to fix. This is mostly for the optics l90 so please respect the tone! Hope this works.
Click to expand...
Click to collapse
Not scolding, so don't take this the wrong way, but this thread is in the wrong forum. This should be in the "General" section of the L90 forums.
Thread has been marked. I've asked admin to move to the correct forum.
Sorry for posting this in the development section.
Q&A for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
A little different brick of my Moto G 2nd gen(XT-1068).plz help
Hi ,
Please dont ignore my mail just bcoz its too long. I have been following this thread from four to five days. Will you please help me ? Just have a look at my problem. I have been rooting my android phones and have good experience of testing , rooting the handsets. Recently I flashed my Moto G ( xt-1068 ) with lolipop because i was not able to wait till motorolla release it.
I tested it for few days , and successfully downgraded back to 4.4.4 kitkat. It was all fine. I love MIUI so I started my work to port MIUI over our favourite Moto G . I even ported it and was not booting. So I edited updter-script and was trying to flash it back on my xt-1068.
Now the mistake that happened was , due to some error in the script , It aborted the installation. When i checked the log from CWM , It has crossed partitioning and it aborted while extracting the directorties. By mistake I restarted the phone and since the partitions were flashed and there was nothing to execute , my phone is stuck. Its not even starting . Its getting recognised as "qhsusb_bulk". Thts why i came over this thread and tried to follow the procedure you have mensioned.
I am also getting the same error like while flaashing with blank-flash : FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame) and FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet) .
So do i have the same problem that happened with theses guys who tried to downgrade their handsets from Lolipop to kitkat ? If its so , should I also wait for Lolipop release by moto ? or will i have some other problem ? Do you have any solution ? I was really wanted to make MIUI available for our Moto G . I don't feel sad for bricking of m phone but what ifeel sad is I want it back. I can't pass my day without it. i am missing it. Please can you suggest me wht should I do ?
Thanks in advance.
DONT WORK FOR ME :s
I have a moto g 2014 XT1063 and after unlocking the bootloader the phone work well for a minutes. Then i power off the phone and when i try to turn on again the phone is die :S no custom no bootloader dont charge dont vibrate not nothing uu. i try this tutorial but when i run the blankflash he trhrow me a error :/ please help me
Moto G hard brick
Someone please help all of us who have wrongly hard bricked our lovely Moto G 2014 . The blankflash is giving "Error sending packet" error. We all will be really thankful of you. Please help. Although some Devs say that we will have to wait for lolipop, but Moto G 2014 has already 5.0 available. Someone please check this thread and solve the problem.....plz..
link : http://forum.xda-developers.com/moto-g-2014/development/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010
same problem
Hi, i have an moto g xt1068 too and din't power on since yesterday hope to find a solution is hard bricked too.
i bricked mine.problem is the code 43 wich it won t recognize at all the device whatever driver i use.
altho it wont boot black screen i dont know if it charge or not, PC will recognize as device once i press volumedown+power button.
wich on my opinion he works somehow but it isn t recognized bt the windows 7.
i will install a fresh copy of win7 and check again maybe is just a failure from windows.
any other advices feel free to share.
firmwares
do someone has the moto g 2gen firmwares on extention .tar.gz i need them to fix my phone
Help!!
Hi people.
Well, only 2 weeks ago I got my Moto G XT1063 and I unlocked bootloader to install Soak Test of Android 5.0.2 with RetailUSA firmware. (My device's original firmware, was for Claro Colombia).
It worked well, I got it running perfect. Yesterday I saw that official/final version of 5.0.2 was available for my device with RetailUSA firmware, but I needed to do a downgrade to KitKat first, because it wouldn't work if I was in Soak Test yet.
So I made the downgrade, and it was running well, I checked for updates, and there was no updates availables, so I decided to reboot, to see if it may make the update appear. But after turning off my device, and trying to turn it on again, just nothing happened.
Now, my device doesn't want to turn on, neither in fastboot mode. And now, I don't know what to do here. So I would be really thankful for any help provided.
Thanks in advance. Have a nice day.
So here is what happened,
My phone was maybe 14% plugged it in left it charging and went to sleep.
Woke up with the phone alarm and started reading whatsapp messages, at this point the phone was already at 100%.
Maybe 30-40 seconds later, with the cable still plugged in the phone turned off, with no message, it just "died".
Now it wont boot, fastboot, nothing.
Tried some solutions i found on the internet like holding vol down + power button for more than 2 minutes, and nothing.
I really need some help here guys, PLEASE.
The phone was running latest TITAN PRIME ROM 1.1 dev3
Everything will be appreciated, thanks in advance.
partitions whacked out?
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
arvinoids said:
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
Click to expand...
Click to collapse
Same here, also due to 0% battery.
Seems these phones do not shutdown early enough before the battery voltage drops below spec. ****ty engineering.
Please, someone help us for the sake of god.
There are several people with this problem and we don't know how to fix it.
Is there any possibility, any help, anything we could test would be welcome.
Phone Moto G 2014 not turning on after flashing BlissPOP ROM
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Im too facing the same issue.. the device is not turning on.... i jus unplugged from the charger but before putting the device for charging it was 67% battery... after unplugged the device screen jus turned into black i tot,the screen went to sleep but later the device dint turn on..... plzzzzzz guys any1 has any solutions??????????
I followed according to this thread http://forum.xda-developers.com/moto-g-2014/general/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010 but nothing worked....
Gave my Bricked Moto G 2nd Gen to Moto Service Center
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
Please let me know because also I've bricked my device & want to send it to nearest authorized service center.
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
I got my device from service centre n got motherboard replaced with warranty... But got updated to new firmware ss below....
Sent from my XT1068 using XDA Free mobile app
moto g2 shows qhsusb bulk plz somebody help
hello friends.. i don't have Rif JTAG box....to unbrick my moto g2
If anybody have box plz help me...& repaire my mobile bootloader
I will pay for this....plz help help help.......call me on this no.
9465351811
state punjab distt patiala teh nabha
vpo :CHHINTANWALA
exactly same problem.
lijuram said:
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Click to expand...
Click to collapse
i have through exactly same thing. my phone was working exellently on blisspop rom and got bricked once i installed an addon.
now i want to know what u did after tht.
not to mention i dnt have warranty now.
wanna listern to a person going through same ****.
Hello frnds ....my bro have moto g 2nd gen running on lollipop with unlock bootloader rooted and twrp recovery. yesterday i flashed resurrection rom. every thing ok today i reflashed stock lollipop rom by restoring nandroid backup... Today my bro in my absence trying to flash again resurrection rom. my bro is totally noob ...he flash kernel instand of rom which is not compatible with this rom and phone get hard brick .....i has been tried this method but nothing heppened ....plzzz give me solution plzzzzzzzzz
I accidentally flashed laf.img from http://forum.xda-developers.com/lg-l90/general/guide-fastboot-l90-d415-t2827825 now everytime I turn my phone it's stuck on the screen saying "Update Firmware" then a bar with 0%. Is there a way to save my phone? Thanks to whoever helps. :crying:
You fixed it yet? I don't know what to do for that exactly but I have a few things that will probably help you. Need more info.[COLOR="S
whodisname said:
You fixed it yet? I don't know what to do for that exactly but I have a few things that will probably help you. Need more info.[COLOR="S
Click to expand...
Click to collapse
I just did the same thing accedently and have had a hell of a time trying to find any information about this situation. Is there any thing you can recommend for me to fix this? I'm kinda new to the whole developer thing so anything would be super helpful. Thanks.
While i was watching a video on facebook my phone randomly crashed, i waited for the phone to die as i didn't know about the soft reset i could do, and ever since then the phone has not booted past the red motorola logo, i've looked up a few ways to 'unbrick' my phone but they all required me to be able to go onto the device and enable USB debugging mode, which i obviously can't do. I have tried 1 other way which was to try and run "xFSTK-SoC-Driver-Setup-1.0.3.exe" and see if the bootloader would be reinstalled but i keep getting a message saying "libusb0.DLL is missing" and when i download the .DLL online it still says the message no matter where i put it.
I can get into the fastboot menu and i have formatted it to see if there was something on the phone that was stopping it from booting, but alas i am still here with a 'bricked' phone. Hopefully someone can help me get this sorted as i'd rather not have to be on my Nokia C1-01 for long
Thanks in advance
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola RAZR i
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR i Q&A, Help & Troubleshooting
Good luck!
Transmitted via Bacon
MrWafWaf said:
While i was watching a video on facebook my phone randomly crashed, i waited for the phone to die as i didn't know about the soft reset i could do, and ever since then the phone has not booted past the red motorola logo, i've looked up a few ways to 'unbrick' my phone but they all required me to be able to go onto the device and enable USB debugging mode, which i obviously can't do. I have tried 1 other way which was to try and run "xFSTK-SoC-Driver-Setup-1.0.3.exe" and see if the bootloader would be reinstalled but i keep getting a message saying "libusb0.DLL is missing" and when i download the .DLL online it still says the message no matter where i put it.
I can get into the fastboot menu and i have formatted it to see if there was something on the phone that was stopping it from booting, but alas i am still here with a 'bricked' phone. Hopefully someone can help me get this sorted as i'd rather not have to be on my Nokia C1-01 for long
Thanks in advance
Click to expand...
Click to collapse
Try to use RSDlite to install right version of your ROM.
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola RAZR i
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR i Q&A, Help & Troubleshooting
Good luck!
Transmitted via Bacon
Click to expand...
Click to collapse
Thank you for that i am new to this forum so wasn't exactly sure where to post.
Lucki_X said:
Try to use RSDlite to install right version of your ROM.
Click to expand...
Click to collapse
I have RSDLite installed on my computer, but every single video about how to use it is in Spanish, and i don't speak Spanish so i have no idea, i'm also new to this so i have no idea where to get the ROM from or what to do with it whence i have it.
MrWafWaf said:
I have RSDLite installed on my computer, but every single video about how to use it is in Spanish, and i don't speak Spanish so i have no idea, i'm also new to this so i have no idea where to get the ROM from or what to do with it whence i have it.
Click to expand...
Click to collapse
Search here for answers you need http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
Some of the ROM you can download here http://forum.xda-developers.com/showthread.php?t=2239706
I don't know where you can find others. I'm sorry.
Lucki_X said:
Try to use RSDlite to install right version of your ROM.
Click to expand...
Click to collapse
Lucki_X said:
Search here for answers you need http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
Some of the ROM you can download here http://forum.xda-developers.com/showthread.php?t=2239706
I don't know where you can find others. I'm sorry.
Click to expand...
Click to collapse
Thanks for the information but to me that is just words and links, i have no idea what to download, what i need to be looking into, how to use RSDLite, i'm more a visual learner so i learn via watching (im actually a 90% visual learner) and the fact i have no background with this it is relatively confusing
MrWafWaf said:
Thank you for that i am new to this forum so wasn't exactly sure where to post.
Click to expand...
Click to collapse
No problems at all, that's exactly what XDA Assist is here for
Good luck!
Hi MrWafWaf,
Here some extra help.
The things we are going to do is using RSD-Lite to restore your phone if it only has software problems. And we suspect it has that.
What u need for it are the following:
- RSD-Lite from here, unzip and install
- USB drivers: 32Bits or 64bits windows, and install it
- The firmware, this is the difficult part. U need the one from your country. If u got it wrong, it will maybe not be fully optimized for your country and language. Allways take the latest, in this case one with '9.8.2I' in it. (need help, say from where you from, carrier and if u buyed it from a carrier or retail. Maybe we can say which one u need)
So u now have RSD-Lite installed, the drivers installed and a zip file with the latest firmware.
Now see this thread: here
It's about using RSD-Lite. U already did step 1 and 2 from the 6 steps (not numbered, in quote) short guide.
Fastboot mode: Getting into it;
To get in AP Fastboot mode from power off: Hold Powerbutton + volume down. By holding those 2 the phone will boot and after a few seconds reboot. At the time the phone reboots and vibrates release the powerbutton. Now u will be in fastboot mode with all those text lines.
To get in AP Fastboot when the phone is on the (un)lock bootlogo: Hold powerbutton + volume down + volume up. Keep holding it. At the moment the phone reboots, release the powerbutton and volume up. KEEP holding the volume down button. It will now boot in fastboot mode.
Good luck. For the fastboot mode, u may need to try it a few times before it works. But i can assure you it always will work unless u have a hardware problem.