Related
Hi all,
This the UNOFICIAL thread of Boeffla-Kernel for the Samsung Galaxy S3 international.
This change to the original kernel of Lord Boeffla because i like the kernel and to be possible that guys like me that are stuck to EFS_V1 and can't upgrade to V2 to use New Samsung based Jelly Bean 4.3.x and enjoy this really great Kernel
Notes:
This Kernel was changed to work with old Modem EFS_V1 on new Samsung based Jelly Bean 4.3.x roms!!!
This Kernel is only for the new Samsung based Jelly Bean 4.3.x roms!!!
Support
Click here to learn about all possible kernel settings in the config app.
Click here to learn about using the config app.
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for Android 4.3 kernels: KLICK HERE
Features
* To tweak and configure the kernel, load the app "Boeffla-Config V2" from Google play store (or androidpit.com)
* Upstreamed to Linux 3.0.101 (www.kernel.org)
* Based on Samsung source code GT-I9300_JB_Opensource_Update11
* Initramfs from XXUGML2 kernel with Chinese CBD
* CPU "soft" overclocking to 1500 or 1600 MHz
* CPU undervolting interface
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Configurable zRam (Turbo zRam with up to 4 devices)
* Configurable touch-to-wake
* Configurable touch boost frequency
* Configurable early suspend time (for screen off animations, 100ms default)
* Configurable LED for fading mode, speed and brightness
* Configurable charger rate for AC, USB and wireless (default increased to 1100 mA for ac charging)
* Charging logic supports ignore unstable power and remove safety margin
* Charge information display support via Boeffla-Config V2 app
* Boeffla-Sound engine V1.6.4 to unleash the power of the Galaxy S3 audio chip
* Additional governors: zzmoove 0.7d, pegasusqplus and lulzactiveq
* Governor profiles for pegasusq, pegasusqplus and zzmoove for performance, battery saving etc.
* Additional schedulers: ROW, ZEN, BFQ (v6r2) and SIO
* Schedulers configurable separate for internal and external SD memory
* Hardcore speedmod sharpness fix implemented (default is off)
* Black crush fix for better balanced display
* SD card read ahead buffer configurable separate for internal and external SD memory (default increased to 256 kB)
* Ext4 File system tweaks (default to on, can be disabled)
* System Tweaks predefined supported (default is off, new Mattiadj tweak set included)
* WIFI Multicast filter for better battery life
* WIFI wakelock times reduction
* Proportional rate reduction for TCP
* TCP congestion changed from Cubic to Westwood
* Wifi mac address change support
* Dynamic fsync 1.2 implemented
* Timeout for external SD card changed to improve handling of crappy SD cards
* Custom boot animation support
* Swap supported (but not recommended, use zRam instead)
* init.d support (in /system/etc/init.d - set correct permissions!)
* exFat opensource (Samsung OSRC) instead of proprietory modules
* NTFS (read-only access only!) compiled as a module
* CIFS compiled as a module
* NFS compiled as a module
* XBox controller support as module
* exFat support switchable (switch it off if you do not need it)
* Battery monitor wakelocks reduced
* Kernel can root if required (create file "autoroot" on internal sd and reboot)
* Android logger can be disabled
* Kernel logger can be disabled
* Disabled various debug logs and traces
* Frandom compiled as a module (for mods like Crossbreeder)
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback) - now compatible with tools like kTool
* Kernel initialisation log file (with history of 3 log files)
* Exynos vulnerability and sudden dead issue fixed
* Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Compiled with Google arm 4.7 toolchain
* Internal kernel busybox version 1.21.1
Download
UNOFICIAL_boeffla-kernel-5.1-Stable.CWM
UNOFICIAL_boeffla-kernel-5.2-beta1
UNOFICIAL_boeffla-kernel-5.2-beta2
Donation
Just purchase the donation version of the Boeffla-Config app, which also gives you some extra features.
If you like my work, feel free to donate via Paypal: Donation-Link
Credits to developers
Big thanks to Lord Boeffla the creator of this awesome kernel, all i have done was litle changes that the kernel cold work with old modem EFS_V1
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in CWM recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
MAXniper
this one is for me
And this one, we never know
Is it deserve post updates or no one use this?
updated to stable version
Yes, keep updating I'm sure there are people who need this
I am on Rooted stock 4.3 jellybean with stock kernel. Cani flash this kernel for better performance ?
Sent from my GT-I9300 using Tapatalk
baku2313 said:
I am on Rooted stock 4.3 jellybean with stock kernel. Cani flash this kernel for better performance ?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
If you are on old modem yes but on new ones I haven't tested because I'm stuck on old modem efs v1.
If you have efs v2 you can flash the official one of Lord Boeffla.
Sent from my GT-I9300 using xda app-developers app
maxniper said:
If you are on old modem yes but on new ones I haven't tested because I'm stuck on old modem efs v1.
If you have efs v2 you can flash the official one of Lord Boeffla.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hi,
i had network problem for many days ,from flash mg4 with new efs2-my imei is OK -my signal is not stable ,there is for 10min after reboot or switch offline mod but after is lost
i tried all , flash kernel- modem-pacthed modem and kernel-flash firmware original 3 file with wipe and format system-data -and format sd
now i tried flash this kernel and modem mk1 and ALL WORKING FINE
i have imperium rom 23.2 with philz recovery
thank for this work great
i made zip flashable -i9300_modem_mk1
http://www.mediafire.com/download/hy3sojo38bne2wd/I9300_Modem_DDUGMK1(3).zip
maxniper said:
If you are on old modem yes but on new ones I haven't tested because I'm stuck on old modem efs v1.
If you have efs v2 you can flash the official one of Lord Boeffla.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I have a MK1 modem and successfully flashed and working fine.
But in about device there is a "SE for Android Status Disabled" what is this?
Sent from my GT-I9300 using Tapatalk
nik60 said:
hi,
i had network problem for many days ,from flash mg4 with new efs2-my imei is OK -my signal is not stable ,there is for 10min after reboot or switch offline mod but after is lost
i tried all , flash kernel- modem-pacthed modem and kernel-flash firmware original 3 file with wipe and format system-data -and format sd
now i tried flash this kernel and modem mk1 and ALL WORKING FINE
i have imperium rom 23.2 with philz recovery
thank for this work great
i made zip flashable -i9300_modem_mk1
http://www.mediafire.com/download/hy3sojo38bne2wd/I9300_Modem_DDUGMK1(3).zip
Click to expand...
Click to collapse
Glad it works, thanks for the modem i will test it too
EDIT: Has i was thinking the modem doesn't work for me because is for EFS_V2
baku2313 said:
I have a MK1 modem and successfully flashed and working fine.
But in about device there is a "SE for Android Status Disabled" what is this?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
What is the difference between the SE for Android status: Enforcing, Permissive and Disabled?
Enforcing — SE for Android is enforcing the loaded policy. Your device is actively protected from security threats and malicious apps will be denied access.
Permissive — The SE for Android policy file is loaded, but your device is not enforcing it. If a malicious app tries to access a resource that it is not allowed to, the access will be logged but not prevented. This mode is intended for testing and debugging. It generates log files of denied app and allows Samsung to identify new app threats and update its policy files.
Disabled — The SE for Android infrastructure is not enabled, and there is no policy file loaded. Log files are not generated and your system is vulnerable to security threats.
To find out how to check a device’s SE for Android status (formerly called SELinux status), see the KNOX User Guide on the KNOX web portal > Resources tab. You cannot change this setting.
maxniper said:
What is the difference between the SE for Android status: Enforcing, Permissive and Disabled?
Enforcing — SE for Android is enforcing the loaded policy. Your device is actively protected from security threats and malicious apps will be denied access.
Permissive — The SE for Android policy file is loaded, but your device is not enforcing it. If a malicious app tries to access a resource that it is not allowed to, the access will be logged but not prevented. This mode is intended for testing and debugging. It generates log files of denied app and allows Samsung to identify new app threats and update its policy files.
Disabled — The SE for Android infrastructure is not enabled, and there is no policy file loaded. Log files are not generated and your system is vulnerable to security threats.
To find out how to check a device’s SE for Android status (formerly called SELinux status), see the KNOX User Guide on the KNOX web portal > Resources tab. You cannot change this setting.
Click to expand...
Click to collapse
So how to get back permissive or enforcing. Should I reflash the official firmware.
Sent from my GT-I9300 using Tapatalk
baku2313 said:
So how to get back permissive or enforcing. Should I reflash the official firmware.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
try with wannamexposed disable knox, i can't test right now because i'm with other tests
If I'm stuck on EFS v1 (after upgrading to 4.3 my imei has gone) how should i flash this kernel (throw recovery Yup?) And how can i change my modem back to EFS v1 (after flashing 4.3 by odin it changed to v2)?
Skayer
After you flash the ROM flash old modem and this kernel. Only if you are stuck on efs_v1
Sent from my Nexus 7 using xda app-developers app
Could you share zip with v1 modem? I don't know where should i look for it :/
skayer said:
Could you share zip with v1 modem? I don't know where should i look for it :/
Click to expand...
Click to collapse
This is the one I use XXUFME7 http://d-h.st/r5z
Sent from my Nexus 7 using xda app-developers app
baku2313 said:
So how to get back permissive or enforcing. Should I reflash the official firmware.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I'm trying to see how to do it but maybe i will need some help
EDIT: on security tab of Wanam Exposed it changes SELinux status to permissive, its the only thing i found till now
On all stock 4.3 customs I've tried i had camera error :/ Is it cause by this kernel? But finally my imei is ok, so great job :good:
OMX Core by Kartik Verma
This project is not mine. I am just sharing this beautiful work that is entirely made by Kartik Verma. Due to many reasons, he could not submit the project directly on xda. So I am making this thread especially for him. This project did not come out after weeks of its release. So I asked the developer(Kartik Verma) to release it on xda. He is not very much active on xda. So he asked me to publish it for him.
OMX CORE RELEASES.
Note : # In All Updates Custom Kernel & Rooting Needed.
# Everything is in stable condition.
# If you are porting his project, contact me before doing so as we give you the details on where to give proper credits.
1. OMX Core v1-Aroma-Kartik Verma
Made on 23/12/2013
About this__
-->Simple version & primary release of the omx core.
-->No Bug Found.
-->Only tweaking your rom.
-->Tested.
2. OMX Core V2-Kartik Verma
About this__
-->Release For Galaxy Y & Galaxy Y duos.
also for other devices need porting
-->Enhance performance of device
-->Added iduos kernels for Getting Best performance.
Nice kernels I see for GALAXY Y DUOS.
Thanks for the developers of iduos1.3.1 Fixed
[email protected] developers.
-->v2 supports apps2sd/data2sd
-->Modules for increase cpu performance
-->Odex script added for odexing any deodex rom.
Thanks to [email protected] developers
-->Updated Busy box, ZipAlign, Sqlite optimize
-->Adrenaline Engine added
-->Updated Terminal app & Link2SD
3.OMX Core v3_Update.Universal (New)
About this__
-->Universal Root Binary (updated)
-->Stabled Tweaking
-->3g-TurboCharger Script
-->ZipAlign
-->Odexing Files Added
-->Wifi lib
-->New Modules
with firewall support.
-->Updated sqlite3
-->Adrenaline Engine
-->Enhancing Performance, youtube fix
net_buffer,droidwall_modules
-->sysrow & sysrw
-->Net Speedup Script Added(Make some changes in it); ____ kartik [email protected] developers
Gen. Info
DEVICE - NO specific - universal version.
FRIMWARE - DDLG1
UPDATE - OMX CORE V3 UNIVERSAL UPDATE
AUTHOR - KARTIK VERMA
4.OMX Core v4 Universal(ReFixed) (New)
About v4__
-->Net Enhancer Tweaking
-->Build.prop Tweaking
-->ADB FIX,FIX PERMISSION
-->Droidwall Modules & Tweak
-->Adrenaline Engine
-->Updated Busybox , sqlite3
-->ZipAlign
-->New ipv4 Parameter
Main theme to Make OMX CORE V4.
______________________________
This update only Enhance your Net speed and only maded for improving Net speed.
Net Enhancer tweaks increase your net speed when they are setup properly this takes some time to setup after 3 - 4 boot. But Not setup after continuous Boot.
Build.prop tweaking also add codes related to net speed directly added when you flash this update.
Fix permission , Android Debug Bridge . These are binary files.
Fixing permission and ADB fix
Droidwall modules & tweaks used to decrease net usage.
Adrenaline Engine nice tool.After a boot init.d files setup in adrenaline engine also.
Its a better combination to increase device performance & another with adrenaline engine
Updated busybox & sqlite & zipalign
It also works on stock rom with stock kernel.
Contain a file [term-init.sh by Ryuinferno @ XDA] For activating init.d scripting in stock rom.
DOWNLOAD LINKS
Omx core v1 :
Removed from server
Omx core v2 :
https://www.dropbox.com/s/yjts1nhxp93enze/OMX Core V2-kartik verma.zip
Port to another device
https://www.dropbox.com/s/i2pv5itqp8044mm/omx core v2 to another device.txt
Omx core v3 universal update :
https://www.dropbox.com/s/ks2ntobxqdhv516/OMX Core v3 Update Universal.zip
Omx core v4 universal refixed :
https://www.dropbox.com/s/1klnig1um903ekh/OMX Core v4 Universal(ReFixed).zip
Now this fixed.
The bootloop appears. Actually its not a boot loop.
The Folder are same in your system and in my update .
So they cant merge .And device not Boots up.
Fixed and tested.
Some files removed.
Uninstall omx core with this :
Link of OMX Uninstaller
https://www.dropbox.com/s/9nvas4jb6pspi2s/Uninstall OMX Core.zip
Tutorials and other info ,
Link of txt file
https://www.dropbox.com/s/yl1x764kvcep5pq/v4.txt
Before Installing any update.
Flash this zip (recommended)
Link : https://www.dropbox.com/s/7zdc43t0p3tfrpr/Uninstaller for All.zip
ALL ABOUT OMX PROJECT.
LINK : https://www.dropbox.com/s/nhgv47mojzgvim9/All About OMX Project.txt
Installation Instructions
Omx core v2 :
Installation procedure.
Go to cwm mode.
Mount data
Mount system
Go back
Install zip from sd card
Done
Reboot.
Omx core v3 :
Installation procedure
Go to cwm mode
Mount data
Mount sdcard
Mount system
Go back
Install zip
Done
Reboot
Omx core v4 :
Installation procedure
Go to cwm mode
Mount data
Mount sdcard
Mount system
Go back
Install zip
Done
Reboot.
All Done.
Credits :
Optimize sqlite database -taken from thunder bolt ! By pikachu01 @xda
[email protected] : Thanks to him for his Adrenaline Engine ! Nice tool.
[email protected] : Thanks For Iduos 1.3.1 kernel.
[email protected]: Thanks for his init.d activater script.
[email protected] - Thanks for his odex files.
XDA:DevDB Information
OMX Core, a Tool/Utility for the Samsung Galaxy Y GT-S5360
Contributors
the_pirate_predator, kartik verma
Version Information
Status: Stable
Current Stable Version: v2, v3, v4
Stable Release Date: 2013-12-23
Created 2014-02-25
Last Updated 2014-02-27
Reserved
Reply from Developer side :
If u have any problem with root binary.
In v3 update.
Just delete these files.
System/xbin/busybox , sqlite3 , su
If busybox or su present in bin folder than also remove it.
Edit updater script and remove symlinks of root binary .
You done .
Now save .
Repack
And flash all done.
I think this root binary not compatible with all Devices.
Soon i add new binary
Thankx for reporting that binary not working properly.
Gud luck.
Kartik [email protected]
Reserved
Can somebody explain it properly to me?
patri3x said:
Can somebody explain it properly to me?
Click to expand...
Click to collapse
Post updated with more procedure and a link has been added that explains all about OMX.
the_pirate_predator said:
Post updated with more procedure and a link has been added that explains all about OMX.
Click to expand...
Click to collapse
I really appreciate your efforts but my query is that this is sgyd section and i was hoping to get one and only flashing file here...not added v4 and other files...
Dont misunderstand me,I respect your efforts...But i already have this http://forum.xda-developers.com/showthread.php?t=2376794...
Now please enlighten me about your project and do you really want me to try it...
Thanking You.
patri3x said:
I really appreciate your efforts but my query is that this is sgyd section and i was hoping to get one and only flashing file here...not added v4 and other files...
Dont misunderstand me,I respect your efforts...But i already have this http://forum.xda-developers.com/showthread.php?t=2376794...
Now please enlighten me about your project and do you really want me to try it...
Thanking You.
Click to expand...
Click to collapse
But the developer says.
I also check your thread link.
The files is use some of them are different from your files
And v4 update only increase net speed. Not more than this .This update only made for increasing net Speed
and I already have increased net speed.
Lastly,we make toolbox OMX toolbox.
We write our own scripts.
And every update ha different features.
V3 increase internal memory & else.
P.S. I am not the developer of this tool. I am just sharing the work of my team developer.
I am using XDUOSv3 ROM and its odexed.
So i am supposed to flash V3 and V4 only...Right?
EDIT
Flashing of V3 was successfull...BUT
After flashing V4 mobile is stuck in boot loop... Going back to Backup
Edit(Again)...
Custom ROMS are already rooted your fix should not try to root it again...I think V4 [or V3] installs chainfire's superuser...and it causes problems...Plz fix it and one should have option what fixes to install in aroma installer...
I dont think i will gather enough strength to try it again...But still Thanx...
Thank you
patri3x said:
I am using XDUOSv3 ROM and its odexed.
So i am supposed to flash V3 and V4 only...Right?
EDIT
Flashing of V3 was successfull...BUT
After flashing V4 mobile is stuck in boot loop... Going back to Backup
Click to expand...
Click to collapse
Thanks for reporting! That bootloop has been solved by my developer friend!
Links have been updated!
Reply from Developer
patri3x said:
I am using XDUOSv3 ROM and its odexed.
So i am supposed to flash V3 and V4 only...Right?
EDIT
Flashing of V3 was successfull...BUT
After flashing V4 mobile is stuck in boot loop... Going back to Backup
Edit(Again)...
Custom ROMS are already rooted your fix should not try to root it again...I think V4 [or V3] installs chainfire's superuser...and it causes problems...Plz fix it and one should have option what fixes to install in aroma installer...
I dont think i will gather enough strength to try it again...But still Thanx...
Click to expand...
Click to collapse
Reply from Developer side :
If u have any problem with root binary.
In v3 update.
Just delete these files.
System/xbin/busybox , sqlite3 , su
If busybox or su present in bin folder than also remove it.
Edit updater script and remove symlinks of root binary .
You done .
Now save .
Repack
And flash all done.
I think this root binary not compatible with all Devices.
Soon i add new binary
Thankx for reporting that binary not working properly.
Gud luck.
Kartik [email protected]
OP has some other priorities to concentrate on now and cannot continue support for this thread.
Hello!
This kernel works only on stock KItKat 4.4.4 TouchWiz ROMs for Samsung Galaxy S4 mini Plus I9192I (serranove3g) and I9195I (serranovelte) variants!
Features:
* Based on official kernel source code I9192IXXU1AOA7
* Added some features from official kernel source code I9195IXXU1AOA5 needed for I9195I variant
* Upstream kernel source code to Linux 3.10.33 (New)
* Set up max CPU speed to 1400MHz (instead 1190MHz in stock kernel) (New)
* Used XZ compression to reduce kernel size
* Upgraded compressor and decompressor LZ4 modules
* Added zRAM support with LZ4 transparent compression
* Added Faux123's Intelliplug v3.9
* Added Faux123's IntelliThermal
* Added Sweep2Sleep support
* Added Qualcomm Atheros Prima WLAN module v3.8.20.23
* Upgraded and added F2FS support
* Added CIFS support (New)
* Upgraded taus88 to taus113 algorithm for entropy generator
* Added and realy used frandom (fast random number generator)
* Added KSM support with optimisation for Cortex-A53
* Added Asynchronous Fsync support (New)
* Added init.d support
* Set SELinux always into "Permissive mode"
* Pre-installed bosybox (placed in /sbin folder)
* Compiled with LinaroMod ARM-EABI 4.9 toolchain (New)
* Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
BFQ-v7r6
Credits:
@kashifmin
@K_TECH
WARNING! Flashing custom kernel will trip your knox!
Installation instructions:
1. Download and install one of these custom recovery
2. Copy x.x.x.zip to your sdcard
3. Reboot into recovery mode
4. Choose "Install zip from sdcard"
5. Select x.x.x.zip kernel and confirm installation.
What to do if kernel don't flash via recovery:
1. Download x.x.x.tar.zip
2. Extract x.x.x.md5 from zip file
3. Flash with ODIN x.x.x.md5 file
NOTE: Do this only after installing the kernel through recovery
What to do if wi-fi don't work or key are not stored :
Change in build.prop the next entry
from
Code:
ro.securestorage.support=true
to
Code:
ro.securestorage.support=false
and reboot phone
How to use kernel features:
- use Kernel Auditor for tuning some kernel features
- to enabling KSM add in build.prop:
Code:
ro.config.ksm=true
- to enabling swap in zRAM add in build.prop:
Code:
ro.config.zram=true
- to enabling Sweep2Sleep add in build.prop:
Code:
ro.config.sweep2sleep=true
- to enabling init.d support add in build.prop:
Code:
ro.config.sysinit=true
Additional informations
Full changelog
Source code
Download:
Strange, I have tried two time to flash your kernel (i9195i), but each time it's the 3.10.28 that stay.
It's the 'official' 2.8.7.1 TWRP.
Knox or SEpolicy still there .... I don't know.
zeLogik said:
Strange, I have tried two time to flash your kernel (i9195i), but each time it's the 3.10.28 that stay.
It's the 'official' 2.8.7.1 TWRP.
Knox or SEpolicy still there .... I don't know.
Click to expand...
Click to collapse
OK! I check it.
Of course the TWRP log said that kernel is installed etc... no errors
And there is an easy way to add BLN for this kernel? wonderful feature on my first Galaxy S, as there is no Led notification...
zeLogik said:
Of course the TWRP log said that kernel is installed etc... no errors
And there is an easy way to add BLN for this kernel? wonderful feature on my first Galaxy S, as there is no Led notification...
Click to expand...
Click to collapse
Go to TWRP menu Andvanced -> File Manager
Then go to /dev/block/platform
And send me what do you see
only one directory:
'soc.0' and inside:
-> by-name, by-num,mmcblk0, mmcblk0p[1-27],mmcblk1,mmcblk1p1,mmcblk0rpmb
zeLogik said:
only one directory:
'soc.0' and inside:
-> by-name, by-num,mmcblk0, mmcblk0p[1-27],mmcblk1,mmcblk1p1,mmcblk0rpmb
Click to expand...
Click to collapse
ОК!
go to /dev/block/platform/soc.0/by-name/
Is there boot?
Do you see boot?
Yes boot, aboot ,etc....
If you want more info i can try to show you all node with adb if I find the right directory .when booted.. grrrr
zeLogik said:
Yes boot, aboot ,etc....
If you want more info i can try to show you all node with adb if I find the right directory .when booted.. grrrr
Click to expand...
Click to collapse
I find bug in META-INF\com\google\android\updater-script:
Code:
package_extract_file("boot.img", "/dev/block/platform/7824900.sdhci/by-name/boot");
it must be so:
Code:
package_extract_file("boot.img", "/dev/block/platform/soc.0/by-name/boot");
I replaced it and uploaded new version GT-I9195I_Kernel_custom_KK-4.4.4_ALX-0.1.6.zip
Pleas test new version
alexax66 said:
I find bug in META-INF\com\google\android\updater-script:
Code:
package_extract_file("boot.img", "/dev/block/platform/7824900.sdhci/by-name/boot");
it must be so:
Code:
package_extract_file("boot.img", "/dev/block/platform/soc.0/by-name/by-name/boot");
I cheng it and download new version GT-I9195I_Kernel_custom_KK-4.4.4_ALX-0.1.6.zip
Pleas test new version
Click to expand...
Click to collapse
you have already upload this new version ? Waiting for it for test this new kernel
zeLogik said:
you have already upload this new version ? Waiting for it for test this new kernel
Click to expand...
Click to collapse
Yes, i already upload new version
alexax66 said:
Yes, i already upload new version
Click to expand...
Click to collapse
Sure the link there is uptodate:
http://forum.xda-developers.com/attachment.php?attachmentid=3447785&d=1440256155
is ok ?
I have redownloaded it, and it's exactly the same problem.
zeLogik said:
Sure the link there is uptodate:
http://forum.xda-developers.com/attachment.php?attachmentid=3447785&d=1440256155
is ok ?
I have redownloaded it, and it's exactly the same problem.
Click to expand...
Click to collapse
yes this version has change in the script
Can you flash kernel from Odin?
I made version for ODIN flash
So I have downloaded it, extract to verify, and yes the script was up-to-date.
Push it with adb, flash it, and it's the same... always 3.10.28xxxx kernel ....
I can test with heimdall if you want.
zeLogik said:
So I have downloaded it, extract to verify, and yes the script was up-to-date.
Push it with adb, flash it, and it's the same... always 3.10.28xxxx kernel ....
I can test with heimdall if you want.
Click to expand...
Click to collapse
ОК!
maybe I made a mistake
I recompiled kernel and uploaded new version again
Have retry to download it(new one). Always the same....
zeLogik said:
Have retry to download it(new one). Always the same....
Click to expand...
Click to collapse
Hmm..
It's very interesting
This kernel has been successfully installed in I9192I from TWRP
Maybe Samsung has made a new defense????
Double check.
Fresh download -> recovery etc.... But always the old kernel.
Have you the tar file?. So i can test with Heimdall.
---------- Post added at 06:32 PM ---------- Previous post was at 06:30 PM ----------
Your version of twrp or the 2.8.7.1 'official'?
zeLogik said:
Double check.
Fresh download -> recovery etc.... But always the old kernel.
Have you the tar file?. So i can test with Heimdall.
---------- Post added at 06:32 PM ---------- Previous post was at 06:30 PM ----------
Your version of twrp or the 2.8.7.1 'official'?
Click to expand...
Click to collapse
ОК
No, i used ported version TWRP 2.8.4.0
alexax66 said:
ОК
No, i used ported version TWRP 2.8.4.0
Click to expand...
Click to collapse
I tested your new kernel and it work on my device !
Envoyé de mon GT-I9195I en utilisant Tapatalk
Disclamer
I know that many will say that it is an equal rom others posted, but this my rom she is differentiated. I've been looking for improvements and for it to be an excent version of a stock. I hope it is the first of many other roms not only for the J7 model but for other variants.
***Please as soon as you install the rom please a return because the opinion of yours is very important.***
**Preview**
https://www.youtube.com/watch?v=mek77Zss6UM
Code:
# This ROM is made for G610M and Variants F/Y
# Flash it at your own Risk!
# Your warranty is VOID Knox flags 0x1
# I'm not responsible for damage to equipment or loss of warranty!
!!FOLLOW THE INSTRUCTION HOW TO FLASH!!
STOCK SLIM NOUGAT SM-G610M / F V2.0
Based on G611FDDU1ARG4
Bootloader on G611FDDU1ARG4
Android security patch level 2017-08-01
PDA - G611FDDU1ARG4
CSC - G611FODD1ARG1
PORT J7 PRIME 2 G611F
Support for models G610M / F
FM Radio
init.d support in Kernel
Optional VoLTE exchange in configurations
Modded scritp for gaming experiance without battery draining
Deodexed
Zipaligned
Added Build.prop Tweaks
Added CSC Tweaks
Multiple languages
Optimized Battery for script
Stability and optimization for script
SELinux Enforcing
VoLTE support
Samsung Clouds (Removed, but can be added through the fix that will leave available).
Fast Charge
4g icon
Front Camera and Flash G610F OK (Fix for the G610M soon)
Rear Camera and Flash ok
Root Magisk 17.1 ( Ctsprofile: True / Basic Integrity: True).
STOCK SLIM NOUGAT V2.0 [VoLTE] J7 Prime SM-G610M / F Only - Media Fire / Google Driver
Fix Samsung Cloud / Samsung App
Fix Samsung Cloud V 1.0 - Media Fire / Google Driver
FIX WIFI DIRECT - PORTAL CAPTIVE - SIM TOOLKIT
FIX STOCK SLIM NOUGAT - WIFI DIRECT - PORTAL CAPTIVE - SIM TOOLKIT- Media Fire / Google Driver
BUG
If there is a bug, please report me ...
Attention
[*]* Supports Oxygen kernel but by default it does not support init.d (Comes disabled in the kernel).
If you wanted to install xposed, rom is compatible with it, but as rom comes with Magisk installed, basicIntegrity goes from true to false.
Liked ? I need to raise funds to buy a better notebook to continue customizing rom for you.
Donation: Click Here
HOW TO INSTALL
1. Install Recovery 3.2.2
3. Download the ROM and copy it to your pendriver and use an otg cable or copy the rom to the internal memory of the device when the device is in TWRP mode that allows the USB cable to access the internal memory of the device.
4. Mount system , data and cache
5. wipe dalvik-cache , cache , data and system
6. After that flash the ROM
7. Follow Aroma Installer
8. At the end of the installation of the autoreboot rom will not happen because it will present error 11, do not worry this will not affect the installation of the rom reboot manually.
9. Wait 2 to 5 minutes (First start of installation take a long boot).
Version Information
Kernel 3.18.14
Android: 7.1.1
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2018-10-03
Credit :
Thanks to @samsung for firmware
Thanks to @amarullz for Aroma Installer
Screenshot
Changelogs:
2018/10/09
- FIX WIFI DIRECT
- PORTAL CAPTIVE
- SIM TOOLKIT
Changelogs:
2018/10/07
- Add Fix Samsung Cloud
Changelogs:
2018/10/03
- Samsung Cloud comes by default in the installation
- VoLTE advanced support
- Removed the UCMini browser and added Firefox
- Samsung Secure comes by default in the installation
- Enable Doze for GMS this by default in the system does not need to add module in masgik
- Added Bixby in conjunction with the camera
- The tools of Game Tune have been removed because the rom has script added for the improvement and performance of the games.
reserved
new fix add
Screencapture please?
do I need to install fix files?
barbarconan said:
do I need to install fix files?
Click to expand...
Click to collapse
Should you need the fixes? For I added the fixes for those that accuracy of services not available in rom.
usb (pc connect) not working
barbarconan said:
usb (pc connect) not working
Click to expand...
Click to collapse
Have you tried debug mode in developer mode? In some cases when it's debugging mode enabled some pc happens that it does not recognize. The rom is tested before being sent to XDA, and the fixes added here are to requests from users who need them, which in itself does not present any bug.
what about screencapture? the thing that i need for this rom, ill try to install pubg if it can handle the game on it.
icodix said:
what about screencapture? the thing that i need for this rom, ill try to install pubg if it can handle the game on it.
Click to expand...
Click to collapse
I'm already preparing an update for it. I'm adding and removing other things by testing it before posting it here. I want to let her 100% to avoid headache.
darkfalling said:
I'm already preparing an update for it. I'm adding and removing other things by testing it before posting it here. I want to let her 100% to avoid headache.
Click to expand...
Click to collapse
nice2. im using Y variant can't wait to use it again and also please add init.d support. Thank you very much!
Does this Rom work on J7 Prime 2 (G611F)?
Hichem Saadani said:
Does this Rom work on J7 Prime 2 (G611F)?
Click to expand...
Click to collapse
She is a port of J7 Prime 2 for J7 Prime M and F.
icodix said:
nice2. im using Y variant can't wait to use it again and also please add init.d support. Thank you very much!
Click to expand...
Click to collapse
All my roms support init.d by installing the Kernel Auditor you will see all the script I add
darkfalling said:
All my roms support init.d by installing the Kernel Auditor you will see all the script I add
Click to expand...
Click to collapse
Copy. Thanks! Cant wait for the release xD
add screen capture and dolby pls
barbarconan said:
add screen capture and dolby pls
Click to expand...
Click to collapse
Soon, new build.
darkfalling said:
Soon, new build.
Click to expand...
Click to collapse
I'm looking forward to
Is it perfect for the M version? Do you have an original bootanimation flash file?
Dragonfly Kernel v1.5 for the LG G8 Korean / US
Introduce
First of all, I'd like to thank Metaphysics team for giving the first custom kernel of G8 USA. Unfortunately I'm using G8 - Korean and they haven't released version for the Korean variant yet. I had to learn how to build a kernel for myself based on their kernel source. However, I want to learn more so I decided to compile the kernel from LGE open source. Now, my kernel is quite stable to be released and shared to the G8 community. You can call it the Dragonfly kernel.
Main Features:
- Based on LGE open source LMG820N_Android_Q_v20r: http://opensource.lge.com/osSch/list?types=NAME&search=g820n
- Linux-Stable-Upstream included to latest 4.14.205
- Next-Gen CAF-Tag LA.UM.8.11.r1-02600-NICOBAR.0 merged
- Regular CAF-Tag for SD855 merged LA.UM.8.1.r1-16200-sm8150.0
- Compiled by ProtonClang 12.0.0 with -O3 speed optimizations
- No VLAs
- Magisk included
- F2FS support
EAS related features:
- EAS implementation patched up to latest CAF state
- Disable autogroups and use cgroups for more efficient task placement
- CPU input boost
File System related features:
- Include rapid GC by @arter97
Network related features:
- Wireguard Support (Details)
- Add new TCP congestion algorithm: BBR2, agilesd
Memory related features:
- Include zstd
Wakelock Blocker:
- Add Boeffla Wakelock Blocker v1.1.0
- The most common and safe wakelocks are blocked by default: qcom_rx_wakelock;wlan;wlan_wow_wl;wlan_extscan_wl;netmgr_wl;NETLINK
How to flash the Kernel:
- You can flash the kernel zip file via TWRP or Magisk
- You can also extract the new_boot.img to flash it via fastboot mode
Known bugs:
- You tell me
DOWNLOAD:
Download is located always in
https://github.com/anht3889/LGE_G820_Kernel_Caf/releases
Important: Read after Download
Be sure to turn off Secure start-up before flash this kernel
Credits:
- Metaphysics kernel team: https://github.com/KamioRinn/Metaphysics_LGE_G820_Kernel
- SGCMarkus for his guide of building kernel and TWRP
- Erick G for bringing new TWRP to G8 which supports F2FS
- Jean Carlos Bencosme for adding / picking kernel features
- Kirisakura for his great kernels
- Sultanxda for his simple_lmk
- LGE for the kernel open source
- All other great kernel devs
Contributors
quantan
Source Code: https://github.com/anht3889/LGE_G820_Kernel_Caf
XDA:DevDB Information
Dragonfly, Kernel for the LG G8
Contributors
quantan
Kernel Special Features:
Version Information
Status: Stable
Created 2020-09-16
Last Updated 2020-11-14
Previous versions, e.g. v1.4, don't work with the new TWRP 3.4. Therefore, I use Anykernel from v1.5. I recommend you follow the steps below:
1. Install magisk patched stock boot.img
2. Install new TWRP 3.4 from Magisk Manager
3. Reboot to TWRP
4. Install Magisk and reboot to TWRP
5. Install Disable Verity zip file and reboot to TWRP
6. Install my kernel Dragonfly v1.5
For newer version, i.e. v1.6, you don't need to repeat all steps above. You just want to flash thew newest Dragonfly.
And good news to you guys, TWRP 3.4 supports F2FS so I decided to enable F2FS support in my kernel as well. To make F2FS, please follow these steps:
1. Install my kernel v1.5
2 .Reboot to TWRP 3.4
3. Change file system of /data to F2FS
4. Replace the attached modified fstab to support F2FS of /data
5. Reboot
Note: You will lose your data.
In case you don't know:
- TWRP-3.4.0.0-G820N.zip and fstab.alphaplus for G8 Korean
- TWRP-3.4.0.0-G820UM.zip and fstab.alphalm for G8 US
Give credits to Erick G and @SGCMarkus for bringing TWRP to our phones.
Changelog:
v1.5:
- Fix touch issues for TWRP
- Add Kcal
- Add KLapse v5.0
- Update to 4.14.205
- Update lze and add lzo-lre for Zram
- Use Anykernel
v1.4:
- Import LGE v20r open source changes
- Upstream to linux-stable v4.14.203
- Upstream CAF LA.UM.8.1.r1-16200-sm8150.0
- Fix audio and OK Google hot word issues
- Improve schedutil
- Power saving workingqueues enabled by default
- Change various drivers ( MM, audio) to user power efficient workingqueues. Thanks to @Freak07 's commits
- Update sdcardfs
v1.3:
- Merge tag 'LA.UM.8.11.r1-04300-NICOBAR.0'
- Add ntfs and exfat support
v1.1 - v1.2 - Intial kernel
Good work ...mostly. Huge showstopper is the missing support for exfat/ntfs with sdcard. With USB exfat is working. Only fat32 formatted sdcards are working. But this is a nogo with files > 4GB
tron1 said:
Good work ...mostly. Huge showstopper is the missing support for exfat/ntfs with sdcard. With USB exfat is working. Only fat32 formatted sdcards are working. But this is a nogo with files > 4GB
Click to expand...
Click to collapse
Thank your for pointing it out. I just add exfat and ntfs support to v1.3. Enjoy it
tron1 said:
Good work ...mostly. Huge showstopper is the missing support for exfat/ntfs with sdcard. With USB exfat is working. Only fat32 formatted sdcards are working. But this is a nogo with files > 4GB
Click to expand...
Click to collapse
Which exact Model do you use? Is there a specific german Model nesessary?
Deutschmann said:
Which exact Model do you use? Is there a specific german Model nesessary?
Click to expand...
Click to collapse
It doesn't work on any LG g8s models...
@quantan Could you make it compatible with LG G8s models? LM-G810 is the model code
Hi Guys. The new v1.4 is just released. I have been quite busy due to family and work stuff. Here is the changelog:
- Import LGE v20r open source changes
- Upstream to linux-stable v4.14.203
- Upstream CAF LA.UM.8.1.r1-16200-sm8150.0
- Fix audio and OK Google hot word issues
- Improve schedutil
- Power saving workingqueues enabled by default
- Change various drivers ( MM, audio) to user power efficient workingqueues. Thanks to @Freak07 's commits
- Update sdcardfs
Eduxki said:
@quantan Could you make it compatible with LG G8s models? LM-G810 is the model code
Click to expand...
Click to collapse
I'll check if I can make a version for LG G8s tomorrow. However, I can't guarantee that it will work for G8s or not since I don't have that phone. @Eduxki Give me your model, e.g. LMG810EA, and your operator / country as well. Is Android 10 available for your phone now since this kernel is for Android 10
quantan said:
Hi Guys. The new v1.4 is just released. I have been quite busy due to family and work stuff. Here is the changelog:
- Import LGE v20r open source changes
-...
Click to expand...
Click to collapse
thanks for your hard work! i just installed it on my G820N with latest 20s-fw... seems to be working fine so far.
PS: installed it via TWRP, and had twrp re-inject itself into the boot-img afterwards again.... => would be nice if your prepared installer zip-file would not just include magisk, but also twrp (just as a safety-measure to not loose twrp when installing your kernel.
PPS: after your src rebase/update to that 20r kernel source drop, "dragonfly" is working with my 20s-fw image again!! your previous version with only 20a kernel src only worked until 20m (march sec-patch) firmware, neither 20o nor 20s could run stable on that 20a-kernel. gui hung, apps didn't respond etc... thankful that 20s-fw finally runs stable so far on those 20r-kernel updated version.
kimba99 said:
thanks for your hard work! i just installed it on my G820N with latest 20s-fw... seems to be working fine so far.
PS: installed it via TWRP, and had twrp re-inject itself into the boot-img afterwards again.... => would be nice if your prepared installer zip-file would not just include magisk, but also twrp (just as a safety-measure to not loose twrp when installing your kernel.
PPS: after your src rebase/update to that 20r kernel source drop, "dragonfly" is working with my 20s-fw image again!! your previous version with only 20a kernel src only worked until 20m (march sec-patch) firmware, neither 20o nor 20s could run stable on that 20a-kernel. gui hung, apps didn't respond etc... thankful that 20s-fw finally runs stable so far on those 20r-kernel updated version.
Click to expand...
Click to collapse
Thank you for your feedback. Actually in Dragonfly v1.3 I did lots of changes to schedultil based on Pixel 4 XL kernel. However it didn't work well. Sorry about that. In the v1.4, I revert the changes and make other improvement to schedutil gov.
I'll look into the TWRP injection and hopefully it will be available in v1.5 or 1.6. Any other features you guys want, please let me know.
quantan said:
Thank you for your feedback. Actually in Dragonfly v1.3 I did lots of changes to schedultil based on Pixel 4 XL kernel. However it didn't work well. Sorry about that. In the v1.4, I revert the changes and make other improvement to schedutil gov.
I'll look into the TWRP injection and hopefully it will be available in v1.5 or 1.6. Any other features you guys want, please let me know.
Click to expand...
Click to collapse
as for TWRP integration: keep in mind that there are also separate versions for INTL vs KOR edition of TWRP, just like with the kernel itself!
further ideas? :cyclops: ... fix touchscreen in recovery => code fixes already exist, check here:
https://github.com/ErickG233/LMV500-sm8150_kernel/commit/1b5b93d72ec87054ef2d80c8d955dcdaa40d4332
if i come up with additional ideas i'll let u know.
PS: it's been a while since i last modded/hacked/upgraded android kernels :good:
PPS: maybe sth like the ooooold "crossbreeder" mod =>
https://github.com/f1vefour/CrossBreeder ... but i'm unsure if this is still relevant and or working on "10"... as the original code is rather... dated
Thank you for your efforts. Is there a GSI suitable for g820?
kimba99 said:
as for TWRP integration: keep in mind that there are also separate versions for INTL vs KOR edition of TWRP, just like with the kernel itself!
further ideas? :cyclops: ... fix touchscreen in recovery => code fixes already exist, check here:
https://github.com/ErickG233/LMV500-sm8150_kernel/commit/1b5b93d72ec87054ef2d80c8d955dcdaa40d4332
if i come up with additional ideas i'll let u know.
PS: it's been a while since i last modded/hacked/upgraded android kernels :good:
PPS: maybe sth like the ooooold "crossbreeder" mod =>
https://github.com/f1vefour/CrossBreeder ... but i'm unsure if this is still relevant and or working on "10"... as the original code is rather... dated
Click to expand...
Click to collapse
- The fix for touchscreen in recovery is added to my kernel.
- I currently have no idea about TWRP. I have ramdisk with TWRP but no magisk. Can you install TWRP and Magisk then export boot.img and give it me? I will extract ramdisk from it then integrate the ramdisk to my kernel.
lufan said:
Thank you for your efforts. Is there a GSI suitable for g820?
Click to expand...
Click to collapse
Havoc, Bliss, Lineageos GSI should be good.
quantan said:
- The fix for touchscreen in recovery is added to my kernel.
- I currently have no idea about TWRP. I have ramdisk with TWRP but no magisk. Can you install TWRP and Magisk then export boot.img and give it me? I will extract ramdisk from it then integrate the ramdisk to my kernel.
Havoc, Bliss, Lineageos GSI should be good.
Click to expand...
Click to collapse
It can be used, but it can't double-click the wake-up screen, the display after the screen is not turned off, and the vibration intensity is not adjustable. I backup the g820 boot through twrp, which contains magisk. I hope you can use it
https://drive.google.com/file/d/17I-m9QdmOzn7CXH3hOl-c04Jnvd7GC3P/view?usp=sharing
wrote you a PM quantan, with my backup stuff in it likewise.
cheers and best regards =)
lufan said:
It can be used, but it can't double-click the wake-up screen, the display after the screen is not turned off, and the vibration intensity is not adjustable. I backup the g820 boot through twrp, which contains magisk. I hope you can use it
https://drive.google.com/file/d/17I-m9QdmOzn7CXH3hOl-c04Jnvd7GC3P/view?usp=sharing
Click to expand...
Click to collapse
kimba99 said:
wrote you a PM quantan, with my backup stuff in it likewise.
cheers and best regards =)
Click to expand...
Click to collapse
Could you guys test the kernel v1.5 with TWRP to make sure it work. Thank you.
https://github.com/anht3889/LGE_G820_Kernel_Caf/releases/tag/v1.5-test
quantan said:
Could you guys test the kernel v1.5 with TWRP to make sure it work. Thank you.
https://github.com/anht3889/LGE_G820_Kernel_Caf/releases/tag/v1.5-test
Click to expand...
Click to collapse
I saw this link in TG channel. It has been tested. Twrp can't access it
@lufan Have you tried it. If not please try it to double check. The ramdisk from KR boot is working.