Related
On wife's G gen2 the stage fright update prompts all the time to install...every time it fails then reboots...after reboot states it failed and no changes were made.
It is locked, not rooted, all stock 5.02, has never been unlocked.
I think it is xt1064 model.
Can I flash a stock rom with locked bootloader?
Will 16gb Gen 3 models be available for sale again?
Sent from my MotoE2(4G-LTE) using XDA Free mobile app
jpconard said:
On wife's G gen2 the stage fright update prompts all the time to install...every time it fails then reboots...after reboot states it failed and no changes were made.
It is locked, not rooted, all stock 5.02, has never been unlocked.
I think it is xt1064 model.
Can I flash a stock rom with locked bootloader?
Will 16gb Gen 3 models be available for sale again?
Sent from my MotoE2(4G-LTE) using XDA Free mobile app
Click to expand...
Click to collapse
ok goto about phone and get the model xt106x ? the build no. and system version - I will point you to correct FULL rom (with sf fix if possible) Full xt106x roms in my signature
yes you can flash a stock rom with locked bootloader ( normally same or higher build version) you can not go backwards or down (downgrade with locked BL)
yes they will but its a IF and when (wait and see) amazon normally a good indication of when..
Sorry for late reply, have been out of town...
Fairly sure it is XT1064, it is U.S. version 3G...
Build is LXB22.46-28
System version is 22.21.28.titan_retuaws.retuaws.en.US retus
Android 5.02
Sent from my MotoE2(4G-LTE) using XDA Free mobile app
I found your ROMs with stage fright already included in another thread that you created and followed those directions and it seemed to work fine.
Although I noticed the Google Services is back to using up most of the battery where usually the screen uses most of the battery. But that is other issue.
Sent from my MotoE2(4G-LTE) using XDA Free mobile app
I have a Nexus 6 bought directly from Motorola but with a T-mobil sim from my
last phone. I'm running the MRA68K factory image of 6.0., and have never been
offered an OTA update.
Let me tell you what I THINK I know.
Although MRA68K does include the T-mobile band 12 and wifi calling feature,
for some reason T-mobil was not happy with it due to some bug revealed
in testing. MRA68X is the release they are happy with, and is what T-mobil
users running 5.1.1 are getting OTA. This OTA is not usable for phones running
any of the 6.0 release. There currently is no factory image for MRA68X.
Here is what I don't know:
- Will MRA68X be eventually released as a factory image.? Usually that comes
before not after the OTA. If not it would seem the need to flash a 5.1.1 image
to be able to take the MRA68X OTA.
- Is the T-mobil specific release a one time thing, or will there be a sequence of
T-mobil specific releases as in 5.X?
- I presume that when the phone checks for an update it bases it on the carrier's
SIM. Just curious, is it Google downloading the update but subject to the carrier's
instructions?
kmandel said:
I have a Nexus 6 bought directly from Motorola but with a T-mobil sim from my
last phone. I'm running the MRA68K factory image of 6.0., and have never been
offered an OTA update.
Let me tell you what I THINK I know.
Although MRA68K does include the T-mobile band 12 and wifi calling feature,
for some reason T-mobil was not happy with it due to some bug revealed
in testing. MRA68X is the release they are happy with, and is what T-mobil
users running 5.1.1 are getting OTA. This OTA is not usable for phones running
any of the 6.0 release. There currently is no factory image for MRA68X.
Here is what I don't know:
- Will MRA68X be eventually released as a factory image.? Usually that comes
before not after the OTA. If not it would seem the need to flash a 5.1.1 image
to be able to take the MRA68X OTA.
- Is the T-mobil specific release a one time thing, or will there be a sequence of
T-mobil specific releases as in 5.X?
- I presume that when the phone checks for an update it bases it on the carrier's
SIM. Just curious, is it Google downloading the update but subject to the carrier's
instructions?
Click to expand...
Click to collapse
I have run all the MRA builds (K, N, R) on T-Mobile and they all support and have fully functioning WiFi calling, Band 12 support, and VoLTE. Not sure what's specific about X but I decided to switch to it just because it's "official".
Sent from my Nexus 6 using Tapatalk
nnorton44 said:
I have run all the MRA builds (K, N, R) on T-Mobile and they all support and have fully functioning WiFi calling, Band 12 support, and VoLTE. Not sure what's specific about X but I decided to switch to it just because it's "official".
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
How did you switch? Did you flash a 5.1.1 factory image and then take the OTA?
kmandel said:
How did you switch? Did you flash a 5.1.1 factory image and then take the OTA?
Click to expand...
Click to collapse
For X I flashed the factory ProFi 5.1.1 then sideloaded the 48I to 58X OTA.
T-Mobile and ProFi will both use X.
Sent from my Nexus 6 using Tapatalk
I hope there's a factory release. Please post here if anyone gets it
kmandel said:
I have a Nexus 6 bought directly from Motorola but with a T-mobil sim from my
last phone. I'm running the MRA68K factory image of 6.0., and have never been
offered an OTA update.
Let me tell you what I THINK I know.
Although MRA68K does include the T-mobile band 12 and wifi calling feature,
for some reason T-mobil was not happy with it due to some bug revealed
in testing. MRA68X is the release they are happy with, and is what T-mobil
users running 5.1.1 are getting OTA. This OTA is not usable for phones running
any of the 6.0 release. There currently is no factory image for MRA68X.
Here is what I don't know:
- Will MRA68X be eventually released as a factory image.? Usually that comes
before not after the OTA. If not it would seem the need to flash a 5.1.1 image
to be able to take the MRA68X OTA.
- Is the T-mobil specific release a one time thing, or will there be a sequence of
T-mobil specific releases as in 5.X?
- I presume that when the phone checks for an update it bases it on the carrier's
SIM. Just curious, is it Google downloading the update but subject to the carrier's
instructions?
Click to expand...
Click to collapse
Someone posted about this on the Android Central comments section: http://www.androidpolice.com/2015/1...etting-an-over-the-air-update-to-marshmallow/
Looks like if you are on K you will get the X updated OTA
blazinazn said:
Someone posted about this on the Android Central comments section: http://www.androidpolice.com/2015/1...etting-an-over-the-air-update-to-marshmallow/
Looks like if you are on K you will get the X updated OTA
Click to expand...
Click to collapse
According to the T-mobile document
https://support.t-mobile.com/docs/DOC-18109
It's only the L* releases that can be updated with the OTA.
kmandel said:
According to the T-mobile document
https://support.t-mobile.com/docs/DOC-18109
It's only the L* releases that can be updated with the OTA.
Click to expand...
Click to collapse
I don't see where it says *only* L releases get the update but it may just be a matter of semantics.
"To be able to update to the current software version, the below requirements must be met:"
^^^ I take this to mean that you must have at least L to get the update. If you are on M already then you still meet that requirement. That's just my thoughts though. Dez is always in the know and that's what he said. Guess we'll just have to wait and see.
i am completely unable to install mra58x no matter how i try to sideload the update from 5.1.1
Tmobile goes back to MRA58K
It confused me.
https://i.imgur.com/vQYNKiL.jpg
I got the ota today, from 28m
Sent from my Nexus 6 using XDA Free mobile app
joshtb86 said:
i am completely unable to install mra58x no matter how i try to sideload the update from 5.1.1
Click to expand...
Click to collapse
I noticed that your signature says "Nexus 6 rooted". If that is in fact the case, you will not be able to install any OTA. Neither via sideloading nor "over the air". The installer looks at the system file, and if there is ANY change from stock (including being rooted), it will abort the install. I've had it fail, even with a couple of apps frozen.
It looks like the document
https://support.t-mobile.com/docs/DOC-18109
has been updated. It now list MRA68K as eligible for the OTA to MRA68X. Earlier
it just listed the L* releases.
cam30era said:
I noticed that your signature says "Nexus 6 rooted". If that is in fact the case, you will not be able to install any OTA. Neither via sideloading nor "over the air". The installer looks at the system file, and if there is ANY change from stock (including being rooted), it will abort the install. I've had it fail, even with a couple of apps frozen.
Click to expand...
Click to collapse
yeah tried on a clean flash without root, still not luck
i installed mra58k clean rom from the andriod dev page until someone makes an X rom
Wow
And for those with MRA58N currently, there was a hint that TMO would OTA push MRA58X as well.
I am starting to think that was Des speaking before he had the details
Sent from my Nexus 6 using Tapatalk
Dougshell said:
I am starting to think that was Des speaking before he had the details
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Check their support web site
Sent from my Nexus 6 using Tapatalk
I see they added it. Well again, sitting here with a nexus device, waiting.
Sent from my Nexus 6 using Tapatalk
BigDig said:
Check their support web site
Click to expand...
Click to collapse
TMO's update site is questionable in and of itself.
I just brought a NEW T-Mobile Samsung Galaxy Note 4, and upon powering up the phone for the first time I found out the phone was on Android 5.1.1 (N910TUVU2DOK2).
Should I return this phone?
The reason I am considering returning this phone is because it is my understanding that the SM-N910T on Android 5.1.1 CANNOT do the following:
1. Cannot be rooted (partially or completely).
2. Cannot be downgraded to Android 4.4.4.
3. Cannot have any apps installed that would unlock the mobile hotspot feature without having to go through your carrier to pay extra.
Can anyone confirm if the above restrictions are correct?
I did the same thing in january..I was so damn excited about getting a N910T that I thought I could do whatever I wanted with and I didn't read up (well enough) on developement and ended up with DOK2. It is true you can't downgrade....as of right now....but I have never had any issue at all with root or apps that require root. As far as the the hotsppt mod is concerned, I can't help too much with that info because b I use straight talk...but i think it's a hit or miss situation...I think the two most popular roms for our phones (Tekhds and Overdrives) have the mod built in but I'm not 100% sure.. but I think the only way you could get one without DOK2 would be used
XDAUserWork said:
I just brought a NEW T-Mobile Samsung Galaxy Note 4, and upon powering up the phone for the first time I found out the phone was on Android 5.1.1 (N910TUVU2DOK2).
Should I return this phone?
The reason I am considering returning this phone is because it is my understanding that the SM-N910T on Android 5.1.1 CANNOT do the following:
1. Cannot be rooted (partially or completely).
2. Cannot be downgraded to Android 4.4.4.
3. Cannot have any apps installed that would unlock the mobile hotspot feature without having to go through your carrier to pay extra.
Can anyone confirm if the above restrictions are correct?
Click to expand...
Click to collapse
You cannot downgrade, but as far as rooted there should be no problem doing that.
Sent from my SM-N910T3 using Tapatalk
Just looking at the first couple of threads should have shown you that it can be rooted. RIF
weakenfalls01 said:
You cannot downgrade, but as far as rooted there should be no problem doing that.
Sent from my SM-N910T3 using Tapatalk
Click to expand...
Click to collapse
Recommended Tekxodus rom or maximum OvrDrive all the instructions are on their pages.
Sent from my SM-N910T3 using Tapatalk
dkb218 said:
Just looking at the first couple of threads should have shown you that it can be rooted. RIF
Click to expand...
Click to collapse
Yea, you can be rooted on Android: 4.4.4 -- 5.0.1 (see this thread from the first couple of threads stickied: http://forum.xda-developers.com/showpost.php?p=55989825 ). It would seem root on 5.1.1 is not possible.
On the offchance I am incorrect, please feel free to link the thread showing that 5.1.1. can be rooted on SM-N910T as I have already gone through all the sticky threads looking,....
XDAUserWork said:
Yea, you can be rooted on Android: 4.4.4 -- 5.0.1 (see this thread from the first couple of threads stickied: http://forum.xda-developers.com/showpost.php?p=55989825 ). It would seem root on 5.1.1 is not possible.
On the offchance I am incorrect, please feel free to link the thread showing that 5.1.1. can be rooted on SM-N910T as I have already gone through all the sticky threads looking,....
Click to expand...
Click to collapse
YES! 5.1.1 CAN be rooted. Just download the newest version of CF-Auto-Root. Do NOT use the one in the thread above/ below. It's outdated. Search that thread however to find others who HAVE rooted their 5.1.1, like me.
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733
Unfortunately the thread was not updated to reflect this fact.
I just got my phone and I am on the same version as the op. I just want to make sure that I do not brick my phone when flashinng. I am planning on using the latest version of twrp and cf autoroot.
So for twrp I'm going to flash
twrp-3.0.2-0-trltetmo.img.tar
And for cf autoroot I am going to flash
CF-Auto-Root-trltetmo-trltetmo-smn910t.zip
Which is the newest version. Just want to double check that I am not making a brick
hunter99507 said:
I just got my phone and I am on the same version as the op. I just want to make sure that I do not brick my phone when flashinng. I am planning on using the latest version of twrp and cf autoroot.
So for twrp I'm going to flash
twrp-3.0.2-0-trltetmo.img.tar
And for cf autoroot I am going to flash
CF-Auto-Root-trltetmo-trltetmo-smn910t.zip
Which is the newest version. Just want to double check that I am not making a brick
Click to expand...
Click to collapse
Not sure if it's been fixed yet, but people have been having issues with TWRP 3, I'd stay with 2.8.
I've a feeling MM will be out VERY soon.
Sent from my SM-N910T using XDA-Developers mobile app
dkb218 said:
I've a feeling MM will be out VERY soon.
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
I've had that feeling for six months now lmao
Sent from my SM-N910T using Tapatalk
Tired of waiting, I've ordered OnePlus 3. Should be here soon will have 6.0.1
Tired of waiting, I've ordered OnePlus 3. Should be here soon will have 6.0.1 out of box.
vision33r said:
Tired of waiting, I've ordered OnePlus 3. Should be here soon will have 6.0.1 out of box.
Click to expand...
Click to collapse
Have fun with your limited 6GB of RAM
Sent from my SM-N910T3 using XDA Premium HD app
Yoshi1221 said:
Have fun with your limited 6GB of RAM
Sent from my SM-N910T3 using XDA Premium HD app
Click to expand...
Click to collapse
I don't even think I need 6GB, 4GB is plenty and I'm sure the 6GB issue will be fixed and knowing that Oxygen OS is opened and the device has unlocked Bootloader it beats waiting for Note 4 to get custom MM rom.
As usual xda members ... Flash this using Odin ... im currently having issues with my dropbox account, So if somebody can get it uploaded to android file host please do ...
AP_ATT_G920AATT4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
BL_G920AUCS4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
CP_G920AUCS4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
https://drive.google.com/open?id=0B-fzI2nnMvViQ3h6ZnREU1BKbEE
Thanks Jusemejose,
and thanked.
Thank you!!
Sent from my Andromax I56D2G using Tapatalk
Has anyone Flashed yet?
loustu said:
Has anyone Flashed yet?
Click to expand...
Click to collapse
Just finished flashing and restoring. So far so good. Anyone have a changelog for this update?
I'm currently on PD6. Can I flash this on top of that via odin or are there incremental updates I need to do prior to this? Thanks for the guidance!
Sent from my SAMSUNG-SM-G920A using XDA Premium 4 mobile app
destrorox said:
I'm currently on PD6. Can I flash this on top of that via odin or are there incremental updates I need to do prior to this? Thanks for the guidance!
Sent from my SAMSUNG-SM-G920A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed PF1 over PD6 on my G920AZ. Should be fine.
Question about updating
Hi, first post on xda.
My phone is an AT&T version but I live in AU, and I want to update it to marshmallow from what it is currently on (5.1.1), and it won't update since I'm not in the U.S.
It's currently on AUCU3BO12.
Can I flash this PG1 without upgrading to anything else first? Can it go from 5.1.1 to 6.0.1 directly from BO12? (According to AT&T's website, BO12 is a bit down the line in terms of updates, there have been a number since).
Edit: Also, which .tar file do I use out of the 4?
Thanks!
Does anyone know the answer to the above?
Finally unbricked my G920 Samsung Galaxy S6 with this
Thank you so much for this. I bricked my phone by stupidly flashing a 5.1 firmware and i've been scrambling to fix it for about a week now. And I couldn't find these files anywhere. Thank you so much
megalucario1900 said:
Thank you so much for this. I bricked my phone by stupidly flashing a 5.1 firmware and i've been scrambling to fix it for about a week now. And I couldn't find these files anywhere. Thank you so much
Click to expand...
Click to collapse
So your phone was on 5.1 and you went straight to 6.0.1 with this? No intermediate updates?
bro i have sameboi2 do u upgraded to marshmallow help ?
---------- Post added at 02:41 PM ---------- Previous post was at 02:36 PM ----------
My phone is an AT&T S6 and I want to update it to marshmallow from what it is currently on (5.1.1), and it won't update since I'm not in the U.S.
It's currently on AUCU3BO12.
Can I flash this PG1 without upgrading to anything else first? Can it go from 5.1.1 to 6.0.1 directly from BO12? (According to AT&T's website, BO12 is a bit down the line in terms of updates, there have been a number since).
Edit: Also, which .tar file do I use out of the 4?
oo0spyder0oo said:
Hi, first post on xda.
My phone is an AT&T version but I live in AU, and I want to update it to marshmallow from what it is currently on (5.1.1), and it won't update since I'm not in the U.S.
It's currently on AUCU3BO12.
Can I flash this PG1 without upgrading to anything else first? Can it go from 5.1.1 to 6.0.1 directly from BO12? (According to AT&T's website, BO12 is a bit down the line in terms of updates, there have been a number since).
Edit: Also, which .tar file do I use out of the 4?
Thanks!
Click to expand...
Click to collapse
Same question... Have you tried?
codei5503 said:
Same question... Have you tried?
Click to expand...
Click to collapse
Nope, haven't risked anything going wrong
is it possible
I am currently running G920AUCU1AOE2 (5.0.2). can i update straight to this version?
TechShopGlobal said:
I am currently running G920AUCU1AOE2 (5.0.2). can i update straight to this version?
Click to expand...
Click to collapse
same question ...
can we go straight to PG1 from G920AUCU1AOE2 (5.0.2) ?
TechShopGlobal said:
I am currently running G920AUCU1AOE2 (5.0.2). can i update straight to this version?
Click to expand...
Click to collapse
I just have updated my s6 from G920AUCU1AOE2 (5.0.2) to this version without any proplems :good:
ahmede90 said:
I just have updated my s6 from G920AUCU1AOE2 (5.0.2) to this version without any proplems :good:
Click to expand...
Click to collapse
Flashed on mine (BOI2, 5.1.1) and it's stuck in the samsung galaxy s6 powered by android screen.
Already restarted to recovery and wiped cache partition and factory reset from there. Still stuck in boot screen...
Any help?
EDIT: Flashed all 4 files this time and it worked. Only flashed the AP file the first time (which people all over the internet say you only need to do) but I had to flash all 4 and now it works. Thank you!
How to flash this os into my S6 without bricking my device ??
hashim_ayyub said:
How to flash this os into my S6 without bricking my device ??
Click to expand...
Click to collapse
You just need to load all 4 files up in Odin (AP, BL etc.) and click start.
Make sure your phone is in download mode.
So I am thinking about going back to stock, so I went to Sammobile to see what the latest is. It shows a firmware FLP1 from 1/17/17. I'm surprised I don't see any reference to it here on the forums. Is it just a a security update? Has it been rooted?
I can't find it.Can you send the link?The latest i found is epk2.
Sent from my SM-N910T using Tapatalk
techngro said:
so i am thinking about going back to stock, so i went to sammobile to see what the latest is. It shows a firmware flp1 from 1/17/17. I'm surprised i don't see any reference to it here on the forums. Is it just a a security update? Has it been rooted?
Click to expand...
Click to collapse
"flp1"does not exist for n910t i double checked at sammobiles.com. PK2 IS THE LATEST.
probably "flp1" is for other model not t-mobile note 4.
umair42 said:
I can't find it.Can you send the link?The latest i found is epk2.
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
Trex888 said:
"flp1"does not exist for n910t i double checked at sammobiles.com. PK2 IS THE LATEST.
probably "flp1" is for other model not t-mobile note 4.
Click to expand...
Click to collapse
You're both right. In my carelessness I was looking at the Note 3 on Sammobile. Sorry for the confusion. But at least I know now there's an update for my aging Note 3.