Related
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.
I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm
I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt
If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .
and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then
Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?
Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..
Yesterday a LG L Fino was brought to me for repair.It makes an error on boot.The error is the boot certificate verify error.I cannot fix this!
I tried booting in recovery,gives me the boot screen,then the error,black screen.
I tried download mode,same.
I even tried flashing it,but LG Flash Tool does not recognize it.When i connect the phone a whole alphabet of drives would appear with LG Logos on them.I was able to only open one of them,the size was 64MB and it stored a image folder.Device manager recognizes the phone as QHSUSB_BULK and a ton of Unknown Devices would appear,after that they disappear and the phone will be recognized as LGE AndroidNet USB Serial Port(COM4).Thank you :angel:
filipkosteski said:
Yesterday a LG L Fino was brought to me for repair.It makes an error on boot.The error is the boot certificate verify error.I cannot fix this!
I tried booting in recovery,gives me the boot screen,then the error,black screen.
I tried download mode,same.
I even tried flashing it,but LG Flash Tool does not recognize it.When i connect the phone a whole alphabet of drives would appear with LG Logos on them.I was able to only open one of them,the size was 64MB and it stored a image folder.Device manager recognizes the phone as QHSUSB_BULK and a ton of Unknown Devices would appear,after that they disappear and the phone will be recognized as LGE AndroidNet USB Serial Port(COM4).Thank you :angel:
Click to expand...
Click to collapse
Will the device boot to fastboot? Does the device respond to adb commands?
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Will the device boot to fastboot? Does the device respond to adb commands?
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Sorry i was inactive,but the LG L Fino is gone now i do not need help.Thank you
Droidriven said:
Will the device boot to fastboot? Does the device respond to adb commands?
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Hi, I have the same problem, here is the picture of my screen.
I have tried to follow these steps, but my phone cannot enter Secure boot mode.
Any idea what can I do?
thanks
ndr113 said:
Hi, I have the same problem, here is the picture of my screen.
I have tried to follow these steps, but my phone cannot enter Secure boot mode.
Any idea what can I do?
thanks
Click to expand...
Click to collapse
Hey there
I have a LG L90 D410 (Similar Qualcomm Device)
And I faced the same issue after a bad flash.
Did you flash anything?
Does the LG logo show up?
Please answer the above questions so I would be able to solve your problem
Gaptain4 said:
Hey there
I have a LG L90 D410 (Similar Qualcomm Device)
And I faced the same issue after a bad flash.
Did you flash anything?
Does the LG logo show up?
Please answer the above questions so I would be able to solve your problem
Click to expand...
Click to collapse
Hello sir!
I have never flash the phone. The first problem that I have seen was after one restart, it won't boot the os, I have seen the LG logo and after that it keeps reboots again. I have entered in recovery mode and wipe all data, but it didn't help. After that I started to see the message above(error) and that's all. My battery is completely empty and cannot charge it because the phone doesn't charge.
ndr113 said:
Hello sir!
I have never flash the phone. The first problem that I have seen was after one restart, it won't boot the os, I have seen the LG logo and after that it keeps reboots again. I have entered in recovery mode and wipe all data, but it didn't help. After that I started to see the message above(error) and that's all. My battery is completely empty and cannot charge it because the phone doesn't charge.
Click to expand...
Click to collapse
Hey there did you use advanced wipe to clear your data or was it factory reset.
If the LG Logo shows up and then the error comes then you can enter download mode by switching off the phone and then hold volume up key and at the same time insert a usb. You would enter download mode. If you enter the mode you can flash a KDZ
Gaptain4 here at your service :fingers-crossed:
Gaptain4 said:
Hey there did you use advanced wipe to clear your data or was it factory reset.
If the LG Logo shows up and then the error comes then you can enter download mode by switching off the phone and then hold volume up key and at the same time insert a usb. You would enter download mode. If you enter the mode you can flash a KDZ
Or If you want custom rom only,enter into recovery mode.
Then click wipe and then advanced wipe.
Check data
Check System
Check Dalvik/art
Check Cache.
And then Press install and download the suitable rom for you phone.
If you cannot resolve the problem contact me again
Gaptain4 here at your service :fingers-crossed:
Click to expand...
Click to collapse
No, they didn't use advanced wipe because they don't have a custom recovery installed. If you read their post more carefully, you'll see where they said that they never flashed the device, this means they have stock recovery, not custom recovery. None of what you posted helps them.
Sent from my LGL84VL using Tapatalk
Droidriven said:
No, they didn't use advanced wipe because they don't have a custom recovery installed. If you read their post more carefully, you'll see where they said that they never flashed the device, this means they have stock recovery, not custom recovery. None of what you posted helps them.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Hey there thank for informing me.
He can still enter into download mode and flash kdz using flash tool
Custom Rom cannot be flashed
But a stock rom can be flashed and can be fixed.
Its a soft brick so he can surely flash a stock rom and recover his phone :fingers-crossed:\
When you try to charge your phone it doesn't show the charging status
But when you completely drain your battery to 0% it will show 0% and shows charging and you can confirm that it is charging
hi everyone
i have a LG L25
and i think i messed up flashing it using TWRP.
it stuck in FIRMWARE UPDATE screen and i cant access its TWRP mode
please help me
Marclance said:
hi everyone
i have a LG L25
and i think i messed up flashing it using TWRP.
it stuck in FIRMWARE UPDATE screen and i cant access its TWRP mode
please help me
Click to expand...
Click to collapse
Did you try to flash a stock update using TWRP?
If so, that is the problem. Stock updates can't be applied to a rooted device or a device that has TWRP installed, any one or both of these will interfere with applying the update. You can only apply stock updates to devices that have an unmodified system partition(no root, no Xposed) and have stock recovery, stock recovery is required for applying stock updates.
If this is what you did, your only option to fix this is to flash your full stock firmware. Do a Google search for:
"Return to stock (your model number)"
If the tools and files exist for your device, that should find it.
Sent from my LGL84VL using Tapatalk
Please Help me, i migrate from global rom to cn rom and failed, my nrm 3 bricked, it can't boot into fastboot mode or edl mode always show bricked screen/like a broken tv screen.
Can't even show nrm 3 logo from the start i press power button.
Please help me with tutor or something.
Thanks in advance
Sorry for my bad english.
Search on forum!!!
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
ZivasJR said:
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Click to expand...
Click to collapse
already try but failed, bcause i cant enter edl mode
darkleccy said:
already try but failed, bcause i cant enter edl mode
Click to expand...
Click to collapse
Show me what u get
RZaR2001 said:
Show me what u get
Click to expand...
Click to collapse
Still same error sir, still with brick screen and didnt show nubia logo from the start this phone turned on. im already tried test point with cable to force enter edl mode and flash using nrm3 unbrick tool and still error/bricked screen.
Can somebody give me stock firmware with include prog_emmc_firehose, rawprogram.xml and patch.xml because i want to try flash using Qfill.
darkleccy said:
Still same error sir, still with brick screen and didnt show nubia logo from the start this phone turned on. im already tried test point with cable to force enter edl mode and flash using nrm3 unbrick tool and still error/bricked screen.
Can somebody give me stock firmware with include prog_emmc_firehose, rawprogram.xml and patch.xml because i want to try flash using Qfill.
Click to expand...
Click to collapse
Bro take a video for ur phone when u opening it
---------- Post added at 01:38 AM ---------- Previous post was at 01:30 AM ----------
darkleccy said:
Still same error sir, still with brick screen and didnt show nubia logo from the start this phone turned on. im already tried test point with cable to force enter edl mode and flash using nrm3 unbrick tool and still error/bricked screen.
Can somebody give me stock firmware with include prog_emmc_firehose, rawprogram.xml and patch.xml because i want to try flash using Qfill.
Click to expand...
Click to collapse
Bro take a video for ur phone when u opening it
RZaR2001 said:
Bro take a video for ur phone when u opening it
---------- Post added at 01:38 AM ---------- Previous post was at 01:30 AM ----------
Bro take a video for ur phone when u opening it
Click to expand...
Click to collapse
https://files.fm/u/yrbhjj8y
this is my video link sir.
i still can get a phone call and entering game mode but my screen always blank
darkleccy said:
https://files.fm/u/yrbhjj8y
this is my video link sir.
i still can get a phone call and entering game mode but my screen always blank
Click to expand...
Click to collapse
Something similar happened to me when I tried to flash the chinesse ROM , but I were able to enter in fastboot and EDL mode. I think there is something wrong with the chinese ROM... Try using the global unbrick tool if you didn't try it, it seems like the smartphone works without the screen, so just connect it to the pc and look at the device manager, there is a possibility of that the pc recognise your phone in EDL mode.
Perseo99 said:
Something similar happened to me when I tried to flash the chinesse ROM , but I were able to enter in fastboot and EDL mode. I think there is something wrong with the chinese ROM... Try using the global unbrick tool if you didn't try it, it seems like the smartphone works without the screen, so just connect it to the pc and look at the device manager, there is a possibility of that the pc recognise your phone in EDL mode.
Click to expand...
Click to collapse
I already do that, my nrm3 can enter edl and detected on my pc qualcom 9008, i flash witn with nrm3 unbrick tool and still failed, still got bricked screen.i think i need stock firmware including prog_emmc_firehose , rawprogram.xml and patch.xml because i want to flash via Qfill
If you can get into EDL mode the posted recovery tool will work. This could be a perfect timing hardware failure. If it is then there is nothing you can do. Flashing that voided the warranty and they can tell.
I dont see how you could cause the EDL to not work unless you were messing with some really deep stuff.
darkleccy said:
I already do that, my nrm3 can enter edl and detected on my pc qualcom 9008, i flash witn with nrm3 unbrick tool and still failed, still got bricked screen.i think i need stock firmware including prog_emmc_firehose , rawprogram.xml and patch.xml because i want to flash via Qfill
Click to expand...
Click to collapse
bro i hve got the same problem , did you worked it out?
I have faced a similar issue in the past but it was easily resolved by the unbrick tool.
I think something is wrong with your unbrick tool try re-downloading unbrick tool.
also i asked the service center of nubia bout rooting and they said the warranty will not get void as they repaired my phone even after it was rooted and was working cn rom.
Which error unbrick tool give you??
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
KnowThyPro said:
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
Click to expand...
Click to collapse
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
reg66 said:
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
Click to expand...
Click to collapse
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
KnowThyPro said:
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
Click to expand...
Click to collapse
Any news?
reg66 said:
Any news?
Click to expand...
Click to collapse
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
KnowThyPro said:
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
Click to expand...
Click to collapse
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
reg66 said:
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
Click to expand...
Click to collapse
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
KnowThyPro said:
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
Click to expand...
Click to collapse
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
reg66 said:
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
Click to expand...
Click to collapse
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
KnowThyPro said:
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
Click to expand...
Click to collapse
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
reg66 said:
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
Click to expand...
Click to collapse
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
KnowThyPro said:
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
Click to expand...
Click to collapse
I've been googling for you dude but no joy yet.... will have another look tomorrow
reg66 said:
I've been googling for you dude but no joy yet.... will have another look tomorrow
Click to expand...
Click to collapse
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Sorry bud, really not sure what's going on with your phone or know much more. Good luck with it tho
KnowThyPro said:
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Click to expand...
Click to collapse
Actually, if you now have recovery, what about booting into twrp and flashing lastest 2012.65 zip from asus website, twice - both slots. see if that fixes your wifi issue
As you said using the QFIL approach worked to boot into system and recovery is back - boot to twrp from that state
KnowThyPro said:
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
Click to expand...
Click to collapse
I think my i messed my phone like yours. Can you provide me step by step? I have tried those step one by one but still stuck at rog logo