Cannot manually provision phone - Sprint LG G4

Hello,
I have been trying to activate my new phone on ring plus. It is an LG LS991. I am on the ZV6 firmware. I have done a device swap and have been in contact with Ringplus. They said that everything that is OK on their end and my phone will not provision. I tried to enter ##MSL# and nothing happens. I do not see an edit menu. I am entering my actual MSL code just to clarify that. Is there a way to get a hidden menu on the G4 that will allow me to edit the MDN & MIN numbers?
Thanks!!!

Try ##873283#

Thanks did not work for me though. Would restoring a .tot and maybe reset it if its a software glitch?

##data#

Cannot really access anything from that menu, I am just returning the phone today because something is wrong with it.

LG g4 works on SIm card So u cannot provsion it mannualy
U need a Sprint Blank simcard to acitvate it

did you happen to modify your carrier folder from the sim unlock mod? Changing the permission of node.db and node.db-journal to all read write execute fixed the provision issue for me.

chwilson2013 said:
Hello,
I have been trying to activate my new phone on ring plus. It is an LG LS991. I am on the ZV6 firmware. I have done a device swap and have been in contact with Ringplus. They said that everything that is OK on their end and my phone will not provision. I tried to enter ##MSL# and nothing happens. I do not see an edit menu. I am entering my actual MSL code just to clarify that. Is there a way to get a hidden menu on the G4 that will allow me to edit the MDN & MIN numbers?
Thanks!!!
Click to expand...
Click to collapse
Any head way on this? How can you access the service menu to edit the MDN and MSID?
Thanks

I'm having the same problem. Can't get this G4 to work on old Sprint SERO - ESN is right but I can't update MIN or MDN any way I try. Anyone figure this out and could help?
thanks

mxsmith said:
I'm having the same problem. Can't get this G4 to work on old Sprint SERO - ESN is right but I can't update MIN or MDN any way I try. Anyone figure this out and could help?
thanks
Click to expand...
Click to collapse
You can try the hidden menu apk I listed in the gsm unlock page it might get you in to help

TheMadScientist said:
You can try the hidden menu apk I listed in the gsm unlock page it might get you in to help
Click to expand...
Click to collapse
Yeah, I had tried that. But it doesn't seem that any of the information will save properly; after a reboot, it still does not give me the right MDN. That is with or without the sim card. With the sim card ii, it gives me the last four of the cards ICCID as the phone number with 000-000-XXXX. Not sure if G4 just will not work b/c I don't have a SIM programmed (it is just an unused sprint sim)? But my sero plan is 3g only, really don't need the lte stuff or sim at all. Without sim card I just get MDN and phone number as 'unknown'.
I think this is probably easier with boost or another carrier; curious if ANYONE has ever activated a g4 on SERO basic?

mxsmith said:
Yeah, I had tried that. But it doesn't seem that any of the information will save properly; after a reboot, it still does not give me the right MDN. That is with or without the sim card. With the sim card ii, it gives me the last four of the cards ICCID as the phone number with 000-000-XXXX. Not sure if G4 just will not work b/c I don't have a SIM programmed (it is just an unused sprint sim)? But my sero plan is 3g only, really don't need the lte stuff or sim at all. Without sim card I just get MDN and phone number as 'unknown'.
I think this is probably easier with boost or another carrier; curious if ANYONE has ever activated a g4 on SERO basic?
Click to expand...
Click to collapse
is sero a gsm carrier or cdma

Its CDMA. Its true sprint, its just an old employee plan. I never added in the LTE/4G service.

Related

gophone sim does not prompt sim unlock code

I have a weird issue, and was hoping that maybe someone could shed some light on what I am seeing.
I just got a used G1 on ebay, which I want to unlock. When I put an ATT GoPhone sim in and boot the phone, I am not prompted for a sim unlock code. It is not unlocked, I know the this as I do not connect to the ATT network at all and cannot modify any of the APN settings on the phone. I know that I need the prompt for sim unlock to actually unlock the phone. Fortunately, I just found an old international sim laying around and that one seems to trip the prompt for the sim unlock. My questions - why does the GoPhone sim not cause the phone to prompt me for an unlock code?
Thanks for your time.
Hmmm that is a good one. I used a normal att sim and it asked for the code, is it a older sim? Maybe one from the cingular days? To weird man.
the gophone sim is a new sim, just purchased and activated. I know the sim is okay, because I can use fine in another phone.
I have an unlock code on order. Hopefully, using my other sim to trigger the code request, I will be able to do the unlock. Hopefully, then, the gophone sim will work fine. I hope to post positive results back later.
thanks
Yea you can unlock it with any sim and switch to another and it will work. I know a few people on here use att gophone sims so you should be fine.
so I was able to sim-unlock the phone using a different sim.
I still have a real problem though - when I put the gophone sim in, I still find myself unable to connect. I even go to settings>wireless controls>Mobile Networks>Network operators and try to manually select at&t. When I do, it says "registering on at&t" for a while and then says "Your SIM card does not allow a connection to this network". Again, I know this sim works - I have been using it in another phone.
What do you think I am doing wrong?
Thanks
It sounds like something is ****ed up with the sim, even though it works for the other phone. Do you have any friends with att sims? Something really sounds off here and if it isn't sim related then I don't know what it could be.
will try to find someone with an AT&T sim, but I don't know what the deal is. I even tried an international sim (that should roam on t-mobile here), but I could not get that to connect. I have tried putting in a tmboile sim and that seems to be the only thing I can to talk to a network
As a side note, no APNs show under settings>wireless controls>Mobile Networks>Network>Access point names when I put non-tmobile sims in. When I add one, it still does not show up on the list.
arg
no more advise? any where else I can ask for help?
Thanks,
Ryan
uiucryan said:
no more advise? any where else I can ask for help?
Thanks,
Ryan
Click to expand...
Click to collapse
what rom are you using?
cyanogenmod 4.0.4, but the initial problem was being seen with multiple roms
thats odd because i thought he had the large apn file in his rom
david1171 said:
thats odd because i thought he had the large apn file in his rom
Click to expand...
Click to collapse
from what i read that is true - but I do not see them
to note I just loaded "The HTC ADP 1.5 CRC1 ROM" from
http://forum.xda-developers.com/showthread.php?t=538456 and still I cannot seem to connect to at&t
uiucryan said:
from what i read that is true - but I do not see them
to note I just loaded "The HTC ADP 1.5 CRC1 ROM" from
http://forum.xda-developers.com/showthread.php?t=538456 and still I cannot seem to connect to at&t
Click to expand...
Click to collapse
i'm sorry i do not know more about the apn side of things i have a tmobile contract so i don't have to worry about that. sorry
I will open a new thread as the thread title no longer accurately reflects the issue.
Thanks,
Ryan
There is a thread for ALL APN's in one of these dream forums. try that one, make sure you save the APN when you enter it to, dont just hit home or whatever.
crpercodani said:
There is a thread for ALL APN's in one of these dream forums. try that one, make sure you save the APN when you enter it to, dont just hit home or whatever.
Click to expand...
Click to collapse
I do click save and it does not show up on list.
FIXED!!!!
To note, I finally got connected to the At&t network.
Please see http://forum.xda-developers.com/showthread.php?p=4469651 to see how I finally got connected.
Thanks to those who helped

Unlocking Sprint G Flex to Cricket/AIO/ATT Wireless

This tutorial is my method for successfully unlocking the G flex to Cricket/AIO/ATT wireless with data/MMS, No battery drain, no Wifi calling drain.
1. Pros. Use Cricket/AIO/ATT sim.
2. Cons. Must dial International code +1 ( or whatever country code you're in) before every 10 digit number.
********Before we start you need to be on stock 4.4.2 sprint rom with Network Mode LTE/CDMA enabled************
(The roaming option does not appear when on GSM)
Next, change theme from "FLEX" to "LG". For some reason FLEX bugs out after the phone unlocks and causes crashes. (May be an isolated incident)
*Now we need to add the APN from AIO wireless into the Apn list by going into settings>roaming>Access point names
*The APN list will be blank and state "NO APNS" this is normal. Hit the menu button and add the AIO wireless APN settings from
http://buzzmobile.us/aio-wireless-apn-settings-internet-mms/
When completed you will need to press the back button and once again you will be greeted with a blank APN screen. Don't worry it's there.
Follow the instructions for root + unlocking the phone here. Total commander doesn't work on 4.4.2, don't use it, do it all with Root Browser (Get from Play Store).
http://forum.xda-developers.com/showthread.php?p=50477852
After you are finished you should be rooted, successfully finished removing bloatware and left with a half unlocked phone.
Now navigate to settings/tethering and networks/mobile networks/Network Mode and change to GSM/WCDMA
**********************You are finished with this portion of the Tutorial***********************
*Fun Part*
1. Download Rom toolbox on your phone, the free/lite version is fine.
2. Navigate to build.prop editor
3. Find and change the settings listed..
ro.carrier=spr (spr to lowercase)
ro.build.target_operator=spr (spr to lowercase)
persist.service.crash.enable=1
Lets keep something in mind here... Once you change these settings you will need to restart your phone and you will be unlocked for Cricket/AIO/ATT networks, however, at this time you should know that if you venture back into network mode and happen to change your settings back to LTE/CDMA, you will lose the ability to change your network mode back to GSM UNLESS you revert the build.prop changes listed above. You can actively switch from LTE/CDMA and GSM by this method although I don't see why anyone would..
At this point you should have Talk/Text/Data/MMS...If not, you may have done something wrong.
**More funner part***
At this point in the tutorial your phone is doing two things.
1. It lies when it says its only on GSM/WCDMA
2. Rapidly draining the S#$% out of your battery.
We need the MSL Code so we may dial ##DATA# in your phone and access LTE settings.
Follow this Tutorial for retrieving your MSL code.
http://forum.xda-developers.com/showpost.php?p=47324060
After you obtain the MSL pull up the phone application and dial ##DATA#(3282) Navigate into LTE and disable LTE/Band 26/Band 41
When you back out of the menu your phone will restart and stop continuously looking for LTE Radio.
**Final touches**
Remove all and I mean ALL sprint and preloaded wifi calling applications if you experience wifi calling battery draining. For some reason wifi calling spazzes out.
I'm not going to list the apk's because it may be an isolated incident and if you find out wifi calling is draining your battery just long press it in battery stats and go to "APP INFO" and find out what it is named and remove it with root browser...
I have been on Cricket/AIO wireless for two weeks now with HSPA+ and enjoying it.
This method may work with other carriers who knows.
**Food for thought**
1. When I change the ro.carrier settings from lowercase spr to ndo like in the APN i got a cool h+ instead of GSM.
2. I have not been able to wifi tether yet with cricket and I'm actively looking for a way now..
3. Think anyone else has issues with the FLEX theme crashing?
thanks.
Sent from my VS980 4G using XDA Premium 4 mobile app
If you don't mind how much do you pay? Will this work with a T-Mobile Flex? I'm pretty happy with T-Mobile since I got my discount back. I have 4 lines so it's around 25 bucks in savings a month.
sweets55 said:
If you don't mind how much do you pay? Will this work with a T-Mobile Flex? I'm pretty happy with T-Mobile since I got my discount back. I have 4 lines so it's around 25 bucks in savings a month.
Click to expand...
Click to collapse
It should work with t-mobile, i don't see why not, instead of ATT/AIO apn's just add a Tmobile apn and make sure that you have some time to play with the build.prop settings for example...
ro.carrier = spr can be changed to ndo and still work because "in theory" it matches the APN.
After adding the tmobile apn setting, changing ro.carrier to " t-mobile" to match the apn might work .
Try it out and see!
p.s i would leave ro.build.target_operator=spr alone, if all else fails you can change this too.
Thanks for the guide . I picked up a sprint g flex and lg g2 cheap, used your guide on both. Enjoying them on NET10 in the states.
patiently waiting for a custom recovery for kitkat on the flex.
interesting thread. i keep running into an issue though. as soon as i reboot after changing the stuff it reverts to where i was before and nothing saved. any suggestions? root is fine...
awesome stuff here i really want to see this happen on my flex!
Wont allow apn change
so i got stuck with a simple issue. when i go into the apn list there is an apn there already.
cinet.spcs
and when i press the menu key it is not showing the add feature to be able to add the new apn as described in the thread.
after doing these I noticed when opening Wifi it force closes and says "Unfortunantley, Settings has stopped"
only wifi that works is the one i used before doing these mods wont allow adding others
also have tried various wifi repair apps
working for me but getting tons of systemui crashes
Concerning the errors that appear often but I came out I did this : I returned and change in the build prop, spr for SPR capitalized and not returned to me the problem also remove the option to persist crash : 0 , take into GSM mode UMTS network selection mobile. I'm in version 4.4
Not working for me.
I tried this 3 times. Once with stock 4.4.2. Once downgraded to 4.2.2 and another time after updating back to 4.4.2 from OTA. All failed. Could not get any sim to be recognized. I am a smart guy and have done much more complicated methods of flashing, rooting, etc. for Android phones. But this just does not work. The phone states no SIM when I put my Cricket SIM in it. But when I put the Sprint SIM back, it reads it.
Any help would be GREATLY accepted. Thank you.
PS: I called Sprint because this is a clean phone. When I asked for the unlock code they gave me the MSL. I have a feeling that is incorrect but I could be wrong. After an hour on the phone, they said that is the unlock code. No matter how much I tried to tell them it's not.
fresnogamer said:
I tried this 3 times. Once with stock 4.4.2. Once downgraded to 4.2.2 and another time after updating back to 4.4.2 from OTA. All failed. Could not get any sim to be recognized. I am a smart guy and have done much more complicated methods of flashing, rooting, etc. for Android phones. But this just does not work. The phone states no SIM when I put my Cricket SIM in it. But when I put the Sprint SIM back, it reads it.
Any help would be GREATLY accepted. Thank you.
PS: I called Sprint because this is a clean phone. When I asked for the unlock code they gave me the MSL. I have a feeling that is incorrect but I could be wrong. After an hour on the phone, they said that is the unlock code. No matter how much I tried to tell them it's not.
Click to expand...
Click to collapse
Maybe this is a better guide for you:
http://www.droidviews.com/how-to-sim-unlock-sprint-lg-g2-ls980/
The Sim unlock does work, I've been using my sprint g flex on cricket for 6 months or so , but only with H+ .
You don't really need the msl or have the phone in good standing (blacklisted is OK).
If the Sim isn't being recognized that means you didn't do the folder replacement right. I had trouble at this part, which was solved by using the app "ROM toolbox". It took a few tries.
As far as changing the APN , just use any shortcut app on the playstore.
For switching bands, use the app " network" from the playstore. No msl needed.
---------- Post added at 07:13 AM ---------- Previous post was at 07:09 AM ----------
Forgot to mention that I am on 4.4.2 ZVA, there seems to be a problem/troubles with this mod after this update. Definitely get rid of bloatware/sprint to stop updates
Supertacomonkeyexplosion said:
Maybe this is a better guide for you:
http://www.droidviews.com/how-to-sim-unlock-sprint-lg-g2-ls980/
The Sim unlock does work, I've been using my sprint g flex on cricket for 6 months or so , but only with H+ .
You don't really need the msl or have the phone in good standing (blacklisted is OK).
If the Sim isn't being recognized that means you didn't do the folder replacement right. I had trouble at this part, which was solved by using the app "ROM toolbox". It took a few tries.
As far as changing the APN , just use any shortcut app on the playstore.
For switching bands, use the app " network" from the playstore. No msl needed.
---------- Post added at 07:13 AM ---------- Previous post was at 07:09 AM ----------
Forgot to mention that I am on 4.4.2 ZVA, there seems to be a problem/troubles with this mod after this update. Definitely get rid of bloatware/sprint to stop updates
Click to expand...
Click to collapse
Tried this method twice so far. Both times the phone reboots or I get multiple force closes that disable the use of the phone. Guess I'll keep trying. Thanks for the help.
fresnogamer said:
Tried this method twice so far. Both times the phone reboots or I get multiple force closes that disable the use of the phone. Guess I'll keep trying. Thanks for the help.
Click to expand...
Click to collapse
Did you use the files from my link? Flex specific?
Don't use total commander.
What software version are you on?
Even after the FC, does it recognize your Sim?
You must also change the build prop, just realize the guide doesn't have that. Probably why your getting FCs.
Save a copy before making changes:
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Supertacomonkeyexplosion said:
Did you use the files from my link? Flex specific?
Don't use total commander.
What software version are you on?
Even after the FC, does it recognize your Sim?
You must also change the build prop, just realize the guide doesn't have that. Probably why your getting FCs.
Save a copy before making changes:
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Click to expand...
Click to collapse
Sorry for getting back to you so late. Life is busy with three kids and a full time job.
I wipped and followed the instructions again. VERY closely. It worked. Thank you very much.
fresnogamer said:
Sorry for getting back to you so late. Life is busy with three kids and a full time job.
I wipped and followed the instructions again. VERY closely. It worked. Thank you very much.
Click to expand...
Click to collapse
Sweet. Glad you got it.
The only trouble I have had with this method is if the phone shuts off or I restart, I have to switch the bands back to GSM.
would this work on LS995ZVB? thanks.

Non-Verizon Branded Nexus 6 on Verizon Network - Need startup help

I need to know the do's and don'ts with adding a non-Verizon branded Nexus 6 to the Verizon network. For example, I read that dialing *228 with Verizon will disable some features on the phone.
1. I purchased the Nexus 6 64gb through the Google Playstore and plan to activate it through Verizon. What are the do's and don't of getting the phone operational?
2. What are the do's and don't after getting the phone operational?
3. Screen burning looks to be a concern. Is there any screen break-in procedure to help prevent screen burning?
Are there any threads out there that have all of this information in one place? Similar to the rooting thread found here: http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
Thanks in advance for the help.
I just stuck the sim card in and booted up. Next went to the Verizon site and activated Advanced Calling. Then did the following...
"In order to enable the setting on your phone, head into the dialer and type in *#*#4636#*#*. When you hit that last *, your phone will jump into the hidden settings menu. Choose “Phone info” and then scroll down until you see an option for “TURN ON VOLTE PROVISIONED FLAG.” Tap that and then reboot your phone (I had to reboot twice for some reason to get it to work). Once booted, head into your phone’s regular settings menu, tap on “More” under “Wireless & networks,” then “Cellular networks.” You should now see an option for “Enhanced 4G LTE Mode” and it should be toggled on."
It was already provisioned evidently from activating on Verizon. It'll say TURN OFF if you're already provisioned. While I was in the "Cellular Networks" settings I changed Preferred Network Type from Global to LTE/CDMA. Then unlocked the bootloader,rooted with The Nexus Toolkit(because I'm getting lazy) and then flashed a 5.1 rom. You may (or not) want to leave your bootloader unlocked according to this thread. I don't know ,I haven't read the whole thing and wasn't planning on re-locking anyway.
http://forum.xda-developers.com/nexus-6/general/relock-bootloader-time-updating-to-5-1-t3053497
Tag cause mine arrives tomorrow. Same deal.
I traded for an at&t n6 popped my Verizon Sim in and everythings been smooth, it was already rooted and boot loader unlocked, I've installed twrp. My question is, are there any Roms I shouldn't flash, or are all Roms for the n6 game?
eric082684 said:
I traded for an at&t n6 popped my Verizon Sim in and everythings been smooth, it was already rooted and boot loader unlocked, I've installed twrp. My question is, are there any Roms I shouldn't flash, or are all Roms for the n6 game?
Click to expand...
Click to collapse
They're all good. Only differences are carrier branding.
thex2 said:
I read that dialing *228 with Verizon will disable some features on the phone.
Click to expand...
Click to collapse
*228 is not how you activate a 4G LTE phone on Verizon - that is only for 3G and basic phones.
thex2 said:
1. I purchased the Nexus 6 64gb through the Google Playstore and plan to activate it through Verizon. What are the do's and don't of getting the phone operational?
Click to expand...
Click to collapse
Call Verizon and tell them you are buying a used Moto X for your line and get them to mail you a nano SIM card.
Then when you get the N6, call Verizon tech support and ask that they put your new N6's IMEI on the whitelist - they need to fill out a form to do that. Call back the next day and have them activate the SIM card they sent you in the N6.
If they can great, if not, then wait another day and see if the request to whitelist the IMEI goes through. If not, then you need to get an IMEI of a Verizon branded phone to get the SIM card active on your line.
What phone is on your line now?
Then after you get the N6 active on your line, you need to get HD voice active on the line.
Sweet, also, I had already activated advance calling on my note edge, will I have go back and reactivate it? I just went into the hidden menu and I don't see the "turn on volte
Norwester said:
I just stuck the sim card in and booted up. Next went to the Verizon site and activated Advanced Calling. Then did the following...
"In order to enable the setting on your phone, head into the dialer and type in *#*#4636#*#*. When you hit that last *, your phone will jump into the hidden settings menu. Choose “Phone info” and then scroll down until you see an option for “TURN ON VOLTE PROVISIONED FLAG.” Tap that and then reboot your phone (I had to reboot twice for some reason to get it to work). Once booted, head into your phone’s regular settings menu, tap on “More” under “Wireless & networks,” then “Cellular networks.” You should now see an option for “Enhanced 4G LTE Mode” and it should be toggled on."
It was already provisioned evidently from activating on Verizon. It'll say TURN OFF if you're already provisioned. While I was in the "Cellular Networks" settings I changed Preferred Network Type from Global to LTE/CDMA. Then unlocked the bootloader,rooted with The Nexus Toolkit(because I'm getting lazy) and then flashed a 5.1 rom. You may (or not) want to leave your bootloader unlocked according to this thread. I don't know ,I haven't read the whole thing and wasn't planning on re-locking anyway.
http://forum.xda-developers.com/nexus-6/general/relock-bootloader-time-updating-to-5-1-t3053497
Click to expand...
Click to collapse
Great info man. Thanks for the reply.
JulesJam said:
*228 is not how you activate a 4G LTE phone on Verizon - that is only for 3G and basic phones.
Call Verizon and tell them you are buying a used Moto X for your line and get them to mail you a nano SIM card.
Then when you get the N6, call Verizon tech support and ask that they put your new N6's IMEI on the whitelist - they need to fill out a form to do that. Call back the next day and have them activate the SIM card they sent you in the N6.
If they can great, if not, then wait another day and see if the request to whitelist the IMEI goes through. If not, then you need to get an IMEI of a Verizon branded phone to get the SIM card active on your line.
What phone is on your line now?
Then after you get the N6 active on your line, you need to get HD voice active on the line.
Click to expand...
Click to collapse
Thanks for the reply. Great info here.
I called Verizon yesterday and told them that I needed a nano SIM for my Nexus 6. They over nighted one to me and I'll have it today. Was this a mistake? Do I need to call back and tell them I need one for the Moto X? And if not, does that mean I don't need to request the IMEI whitelist?
My Verizon Galaxy Nexus is the phone that's currently on my line.
I went to the Verizon store handed them my Google phone and they made it work. Maybe I was lucky I don't know.
Sent from my Google N6 on VZ
JulesJam said:
*228 is not how you activate a 4G LTE phone on Verizon - that is only for 3G and basic phones.
Call Verizon and tell them you are buying a used Moto X for your line and get them to mail you a nano SIM card.
Then when you get the N6, call Verizon tech support and ask that they put your new N6's IMEI on the whitelist - they need to fill out a form to do that. Call back the next day and have them activate the SIM card they sent you in the N6.
If they can great, if not, then wait another day and see if the request to whitelist the IMEI goes through. If not, then you need to get an IMEI of a Verizon branded phone to get the SIM card active on your line.
What phone is on your line now?
Then after you get the N6 active on your line, you need to get HD voice active on the line.
Click to expand...
Click to collapse
I didn't call Verizon for anything. Just cut my sim card down from my S4 and inserted it and booted up. Done.
thex2 said:
I called Verizon yesterday and told them that I needed a nano SIM for my Nexus 6. They over nighted one to me and I'll have it today. Was this a mistake? Do I need to call back and tell them I need one for the Moto X?
Click to expand...
Click to collapse
That's fine. But it won't be active when you get it - you will still have to get it activated. You need to request that your N6 IMEI get on the whitelist - ask tech support to fill out the form and submit it.
thex2 said:
My Verizon Galaxy Nexus is the phone that's currently on my line.
Click to expand...
Click to collapse
OK, well that uses a micro SIM card so you can't use it to get the nano SIM activated. But hopefully they can get your N6 IMEI on the whitelist.
---------- Post added at 08:09 PM ---------- Previous post was at 08:08 PM ----------
marsdiamond said:
I didn't call Verizon for anything. Just cut my sim card down from my S4 and inserted it and booted up. Done.
Click to expand...
Click to collapse
Right, but what does it show when you log onto your account? And did you get HD Voice enabled?
marsdiamond said:
I didn't call Verizon for anything. Just cut my sim card down from my S4 and inserted it and booted up. Done.
Click to expand...
Click to collapse
I have a question. So what happens if you would want to sell the S4? (Currently in that situation) will the person that buys it have trouble activating it?
JulesJam said:
Right, but what does it show when you log onto your account? And did you get HD Voice enabled?
Click to expand...
Click to collapse
I'd be curious to know this as well. Is it listed as a "Non VZW Device"? Or does it show as a Nexus 6? I called 2 different CS reps, and they all told me it is no problem to activate a device from Google Play Store. Same response from a corporate Verizon Store. Further more, I asked about the $25/month discount sticking and he says the discount is subject to your contract. Not your device on the plan. As long as your device is not on EDGE, and you're not on contract, you are entitled to the $25 monthly discount.
I purchased a sim cutter, and I'm jsut up in the air whether to get a 64GB from the playstore, or just buy from Verizon.
SkiRacer2144 said:
I asked about the $25/month discount sticking and he says the discount is subject to your contract. Not your device on the plan. As long as your device is not on EDGE, and you're not on contract, you are entitled to the $25 monthly discount.
Click to expand...
Click to collapse
Yes, you are entitled to it, that is not the issue. The issue is that if the system shows a non-Verizon device on the line, the discount hasn't been sticking through to the next billing cycle and people have had to call to get it readded each month. YMMV.
SkiRacer2144 said:
I purchased a sim cutter, and I'm jsut up in the air whether to get a 64GB from the playstore, or just buy from Verizon.
Click to expand...
Click to collapse
That just depends on how important 64GB vs. 32GB is to you.
itzleo94 said:
I have a question. So what happens if you would want to sell the S4? (Currently in that situation) will the person that buys it have trouble activating it?
Click to expand...
Click to collapse
The sim card is tied to your account so you wouldn't want to include it in a sale anyway. The buyer needs to pick up a new card and have it activated.
Thank you!...I just always remember putting in the IMIE on Verizon so I thought the device was tied to the account as well but thank you for the clarification.
thex2 said:
Great info man. Thanks for the reply.
Thanks for the reply. Great info here.
I called Verizon yesterday and told them that I needed a nano SIM for my Nexus 6. They over nighted one to me and I'll have it today. Was this a mistake? Do I need to call back and tell them I need one for the Moto X? And if not, does that mean I don't need to request the IMEI whitelist?
My Verizon Galaxy Nexus is the phone that's currently on my line.
Click to expand...
Click to collapse
Just get some scissors and cut your old sim down to fit. Really easy. You can download a guide to use. Why pay for an extra sim when the one you have will work just fine.
marsdiamond said:
Just get some scissors and cut your old sim down to fit. Really easy. You can download a guide to use. Why pay for an extra sim when the one you have will work just fine.
Click to expand...
Click to collapse
Verizon gives you SIM cards for free and lots of people mess up their SIM cards when they cut them down.
You only have to pay for a SIM card at a VAR.
JulesJam said:
Verizon gives you SIM cards for free and lots of people mess up their SIM cards when they cut them down.
You only have to pay for a SIM card at a VAR.
Click to expand...
Click to collapse
^this. Verizon overnighted the card to me for free. I didn't want to risk cutting the old one and then being without a phone. It's a business phone, so I can't afford to go without it.
JulesJam said:
Right now on ebay there is someone who is selling a Verizon Moto X 2014 and they have a picture of the box with the IMEI on it. You can use that to get your nano SIM card activated.
People really shouldn't post pics of their IMEIs like that, but they do.
Click to expand...
Click to collapse
You do realize u just told someone to do something illegal.

H/K M8 Radio/network type/MEID problems

Hey guys!
I have the one M8 Sprint H/K edition with S-OFF which seems to be unlocked by now (I tried unlocking methods found here) because it accepts other carriers SIM (international) cards and shows up Sim menu, but I can't get it switch to WCDMA mode and it says "Radio Off". But that's one thing. The other weird thing is that when I recieved the phone (bought on eBay) in "about the phone" -> "account" it had the following info: [email protected] which belongs to Verizon instead of Sprint! I thought it is unlocked and contacted Sprint International, they checked IMEI and serial number and said it's not blacklisted but not unlocked!
So then I reset account settings (in "activate this phone" menu) and now it shows "imei number@hcm.sprintpcs.com".
But I also had the other problem even before the reset. In "about the phone" I could see IMEI # but MEID had and still has 00000000 (eight zeroes), even though fastboot getvar all command shows the correct MEID!
In *#*#4636#*#* menu IMEI is shown as 00000000 (eight zeroes), RADIO OFF and can't switch network type, even though the phone shows correct phone number if you hit "update" at the bottom of this very menu.
Have you had anything like that with your phones guys?
Maybe there's a way to force the phone to switch to WCDMA mode?
Now it's running lollipop, but nothing changed since 4.4.4
Hope we will find the solution together
mrMMMichail said:
Hey guys!
I have the one M8 Sprint H/K edition with S-OFF which seems to be unlocked by now (I tried unlocking methods found here) because it accepts other carriers SIM (international) cards and shows up Sim menu, but I can't get it switch to WCDMA mode and it says "Radio Off". But that's one thing. The other weird thing is that when I recieved the phone (bought on eBay) in "about the phone" -> "account" it had the following info: [email protected] which belongs to Verizon instead of Sprint! I thought it is unlocked and contacted Sprint International, they checked IMEI and serial number and said it's not blacklisted but not unlocked!
So then I reset account settings (in "activate this phone" menu) and now it shows "imei number@hcm.sprintpcs.com".
But I also had the other problem even before the reset. In "about the phone" I could see IMEI # but MEID had and still has 00000000 (eight zeroes), even though fastboot getvar all command shows the correct MEID!
In *#*#4636#*#* menu IMEI is shown as 00000000 (eight zeroes), RADIO OFF and can't switch network type, even though the phone shows correct phone number if you hit "update" at the bottom of this very menu.
Have you had anything like that with your phones guys?
Maybe there's a way to force the phone to switch to WCDMA mode?
Now it's running lollipop, but nothing changed since 4.4.4
Hope we will find the solution together
Click to expand...
Click to collapse
Looks like the phone had lot of work around by previous user. If you can confirm that gsm working and you can call using gsm simcard I can help you with wcdma activation. By the way, HTC never released a Harman kardon edition for Verizon, and it must be Sprint (color black with champagne gold accent). Also, need not worry about MEID as anyone can easily change if the phone is s-off. Hope the phone didn't have a bad esn
Cashreedhar said:
Looks like the phone had lot of work around by previous user. If you can confirm that gsm working and you can call using gsm simcard I can help you with wcdma activation. By the way, HTC never released a Harman kardon edition for Verizon, and it must be Sprint (color black with champagne gold accent). Also, need not worry about MEID as anyone can easily change if the phone is s-off. Hope the phone didn't have a bad esn
Click to expand...
Click to collapse
Thanks for reply!
The phone is pure HK edition. Before sending it to me friend of mine (in the US) confirmed that phone works and activates on Sprint network. I even contacted Sprint to ask them if the phone is unlocked, and they said they had no request to unlock this particular phone and it is not blacklisted (clean ESN).
In about a week I recieved the phone in my country, checked bootloader and it was "Locked" (not "re-locked") and "S-on" running 4.4.4. Then I unlocked bootloader with HTCDev instructions and followed "unlocking" instructions found here. The phone picks up foreign SIM card because "Sim toolkit" app pops up as soon as I insert SIM card. But GSM option is still greyed out and I'm unable to select different network types. If I try switching to UMTS/GSM from settings - mobile data menu it simply says "no SIM in the phone, swithcing back to CDMA mode" and if from *#*#4636#*#* menu it doesn't let me select other network type. Also the radio is still off fore some reason... If needed I can take a brief video showing all settings I have.
I was surprised to see Verison account on Sprint phone, but telling you as is.
P.s. friend of mine owns unlocked H/K M8 and I compare his settings to mine, he has radio ON and GSM is not greyed out and he can switch network types back and forth.
Thanks for help!
mrMMMichail said:
Thanks for reply!
The phone is pure HK edition. Before sending it to me friend of mine (in the US) confirmed that phone works and activates on Sprint network. I even contacted Sprint to ask them if the phone is unlocked, and they said they had no request to unlock this particular phone and it is not blacklisted (clean ESN).
In about a week I recieved the phone in my country, checked bootloader and it was "Locked" (not "re-locked") and "S-on" running 4.4.4. Then I unlocked bootloader with HTCDev instructions and followed "unlocking" instructions found here. The phone picks up foreign SIM card because "Sim toolkit" app pops up as soon as I insert SIM card. But GSM option is still greyed out and I'm unable to select different network types. If I try switching to UMTS/GSM from settings - mobile data menu it simply says "no SIM in the phone, swithcing back to CDMA mode" and if from *#*#4636#*#* menu it doesn't let me select other network type. Also the radio is still off fore some reason... If needed I can take a brief video showing all settings I have.
I was surprised to see Verison account on Sprint phone, but telling you as is.
P.s. friend of mine owns unlocked H/K M8 and I compare his settings to mine, he has radio ON and GSM is not greyed out and he can switch network types back and forth.
Thanks for help!
Click to expand...
Click to collapse
That means the phone is not SIM unlocked. Check the different threads on how SIM unlock under Sprint forum. Once it is SIM unlocked you will receive the gsm signal and you should be able to make calls. If your friend had contacted Sprint (if he was the owner of the phone) for SIM unlock they could have done it in a minute (they do for international travel). Well, anyways there are different methods to SIM unlock and make WCDMA work on your phone. Before that if you want to try changing the network type, use this app - https://play.google.com/store/apps/details?id=de.mangelow.network works very well.
Also, I am not sure for gsm if you even need MEID. If you want to restore the original MEID, try this link - http://androidforums.com/threads/guide-how-to-restore-service-if-youve-lost-your-meid.352598/
Good Luck!
Cashreedhar said:
That means the phone is not SIM unlocked. Check the different threads on how SIM unlock under Sprint forum. Once it is SIM unlocked you will receive the gsm signal and you should be able to make calls. If your friend had contacted Sprint (if he was the owner of the phone) for SIM unlock they could have done it in a minute (they do for international travel). Well, anyways there are different methods to SIM unlock and make WCDMA work on your phone. Before that if you want to try changing the network type, use this app - https://play.google.com/store/apps/details?id=de.mangelow.network works very well.
Also, I am not sure for gsm if you even need MEID. If you want to restore the original MEID, try this link - http://androidforums.com/threads/guide-how-to-restore-service-if-youve-lost-your-meid.352598/
Good Luck!
Click to expand...
Click to collapse
Hey!
FINALLY!!! I got the phone unlocked!
I decided to write original MEID/ESN to the phone with CDMA Tools app and right after reboot the phone said "switching to international mode" and hooked up to my carrier's network. I suspect I got it unlocked a long time ago, but couldn't complete the unlock due to zeroed out MEID/ESN.
I'm sharing this info with all people here who got stuck with the "unlock" - before throwing your phone away check if it displays MEID normally. If not, then check original MEID/IMEI/Serial number in bootloader - barcode and write it down. Then write it to the phone with CDMA tools.
If someone needs an advice, just ask.
HTC one 2017 Same problem
mrMMMichail said:
Hey!
FINALLY!!! I got the phone unlocked!
I decided to write original MEID/ESN to the phone with CDMA Tools app and right after reboot the phone said "switching to international mode" and hooked up to my carrier's network. I suspect I got it unlocked a long time ago, but couldn't complete the unlock due to zeroed out MEID/ESN.
I'm sharing this info with all people here who got stuck with the "unlock" - before throwing your phone away check if it displays MEID normally. If not, then check original MEID/IMEI/Serial number in bootloader - barcode and write it down. Then write it to the phone with CDMA tools.
If someone needs an advice, just ask.
Click to expand...
Click to collapse
Hey man, thanks for posting your solution! i'm glad i don't have to throw my phone away after all...
I would really appreciate if you could explain more of how to use the CDMA tools to write the original MEID/ESN to the phone. I'm from Mexico so if it's posible that you can use a low level english or provide a link to a guide or tutorial, it would be extra awesome ! Thanks again
I'm having a tough timw getting the meid in place, looks it just keeps reverting to old. Are you using DFS or CDMA ?
mrMMMichail said:
Hey!
FINALLY!!! I got the phone unlocked!
I decided to write original MEID/ESN to the phone with CDMA Tools app and right after reboot the phone said "switching to international mode" and hooked up to my carrier's network. I suspect I got it unlocked a long time ago, but couldn't complete the unlock due to zeroed out MEID/ESN.
I'm sharing this info with all people here who got stuck with the "unlock" - before throwing your phone away check if it displays MEID normally. If not, then check original MEID/IMEI/Serial number in bootloader - barcode and write it down. Then write it to the phone with CDMA tools.
If someone needs an advice, just ask.
Click to expand...
Click to collapse

CDMA Workshop alternatives and can I get data on other carriers?

So, I've recently rooted and unlocked my device and I wanted to know if I can bring it to another carrier and still get data.? I'm using the LS991 Sprint version. I also wanted to know if there are any good CDMA Workshop alternatives; it's really expensive and I'm only gonna be using on a few devices.
Dfs
So you rooted (doesn't really matter with respect to carrier support) and you unlocked it (that's what matters with respect to carrier support) - so you put in a SIM card for the carrier you want, set the APN data (use Shortcut Master if needed, there's a version specifically modded for the LS991 directly available in my post HERE - might be a good idea to read that post as well since that's what I did myself.
Worse comes to worse if you have no luck because you unlocked your LS991, consider installing the global LS991 ROM (whether it's Lollipop ZV6 or Marshmallow ZV9 or ZVA - if you install ZVB you can never go back to anything prior so be aware of that) which will work much better for other carriers than using the unlock mod so many of us have done in the past.
Hindsight being what it is, if I knew about the global ROM when I got this G4 recently I wouldn't have mucked around with all the unlocking crap and the carrier partition at all for any reason because just installing the global ROM (or modifying build.prop to allow for global unlocked operation) is way more useful and less damaging to the phone. Modifying the build.prop isn't necessarily a cakewalk but, since someone else has already done it for others and posted the global ROM(s) for Lollipop and Marshmallow (as .img files you flash using the Send_Command.exe/dd method) it's really not a big thing anymore.
If you muck up flashing an .img file you can typically just use LGUP and a TOT file to get things working again so it's relatively safe overall, but if you muck up the unlock and trash the carrier partition content the phone will end up being pretty much useless unless you have that information safely backed up someplace (I'd say multiple backups in multiple locations, to be honest).
Anyway, if you truly want the phone to be capable of working on other carriers, my suggestion is go for the global ROM but that's just my own personal opinion on the matter. I'm using tabp0le's MellowMallow ZVB global ROM on my LS991 and T-Mobile LTE works just fine for me, for the record. It did take a little work - I wrote about how I got the full phone/data working in that post with Shortcut Master - but it does work.
Thanks for the help!
One last question, how did you get other carriers to let you activate the phone? Everytime I try they ask me imei then tell me my phone won't work on their network.
Well I've had service with T-Mobile in the past (not currently but will again soon), I have a bunch of T-Mobile microSIM cards because whenever they put the SIM card activation kits on sale for $.99 or sometimes even free (rare but it happens) I usually grab 3 at a time so I have 'em around for testing purposes. T-Mobile doesn't require me to provide any info to them, and even if I go to their website right now and input my IMEI number it'll say it's not recognized, etc but it's not relevant: it works, and that's what matters.
Most carriers don't actually require you to provide the IMEI for any reason as long as you can get one of their microSIM cards (or nanoSIM with adapter) and then get service without having to contact them. T-Mobile is somewhat unique in that process I suppose. With this SIM card I have (it's never been activated) I can go to their website and sign up for service right now and it'll be active in 10 minutes or less, sometimes when I've activated service (it's prepaid so I don't necessarily keep it month to month, sometimes I choose some other service for testing) it's done before I even sign out of their website, like 30 seconds or less and wham, the phone beeps telling me service is working.
So, the advice is: get a SIM card for the phone from the carrier you're interested in and go from there, not sure what else to suggest honestly.
br0adband said:
Well I've had service with T-Mobile in the past (not currently but will again soon), I have a bunch of T-Mobile microSIM cards because whenever they put the SIM card activation kits on sale for $.99 or sometimes even free (rare but it happens) I usually grab 3 at a time so I have 'em around for testing purposes. T-Mobile doesn't require me to provide any info to them, and even if I go to their website right now and input my IMEI number it'll say it's not recognized, etc but it's not relevant: it works, and that's what matters.
Most carriers don't actually require you to provide the IMEI for any reason as long as you can get one of their microSIM cards (or nanoSIM with adapter) and then get service without having to contact them. T-Mobile is somewhat unique in that process I suppose. With this SIM card I have (it's never been activated) I can go to their website and sign up for service right now and it'll be active in 10 minutes or less, sometimes when I've activated service (it's prepaid so I don't necessarily keep it month to month, sometimes I choose some other service for testing) it's done before I even sign out of their website, like 30 seconds or less and wham, the phone beeps telling me service is working.
So, the advice is: get a SIM card for the phone from the carrier you're interested in and go from there, not sure what else to suggest honestly.
Click to expand...
Click to collapse
You good sir are a god among men, phone and data are working like a charm. Now I can tell sprint to go **** themselves!
glad it worked for you. MY experiences with ls991, i am using it nvmode. zv6 rooted works for me with cdma data. but data doesnt work with zv9 or zva. global rom doesnt work unless, I edit build.prop target carrier to SPR . it is open to use it as global mode. I am using it in cdma nv mode.. not with any sim..
sunilromy said:
glad it worked for you. MY experiences with ls991, i am using it nvmode. zv6 rooted works for me with cdma data. but data doesnt work with zv9 or zva. global rom doesnt work unless, I edit build.prop target carrier to SPR . it is open to use it as global mode. I am using it in cdma nv mode.. not with any sim..
Click to expand...
Click to collapse
so in my case i use att on ls991. my build prop is ruim,sim i believe. now does that sound rite for gsm?
also another cdma workshop alt if qpst i used that one to rebuild my g2 a few years back
TheMadScientist420 said:
so in my case i use att on ls991. my build prop is ruim,sim i believe. now does that sound rite for gsm?
also another cdma workshop alt if qpst i used that one to rebuild my g2 a few years back
Click to expand...
Click to collapse
Ruim is basically used when it comes to cdma sim card.
"Removable User Identity Module (R-UIM) is a card developed for cdmaOne/CDMA2000 ("CDMA") handsets that extends the GSM SIM card to CDMA phones and networks. To work in CDMA networks, the R-UIM contains an early version of the CSIM application."
Your is at&t 4g gsm card. [emoji4]
Check your build.prop and search for
ro.build.target_operator: OPEN
Most probably for global mode open works
For making it work on cdma nv, i have set it to SPR
You can tweak with it by changing to options, it will also change signal bar and 4g symbol like at&t
These will show a Standered international 4G data icon for 3G/HSPA+ and LTE for LTE.
ro.build.target_county: CA
ro.build.target_operator: TLS
These will show a standered international 3G data Icon for 3G/HSPA+ and 4G for LTE (Messes up settings menu pretty bad)
ro.build.target_county: SK
ro.build.target_operator: SKT
If you want the AT&T 4G and 4G LTE Icons.
ro.build.target_county: US
ro.build.target_operator: ATT
Sent from my LGLS991 using Tapatalk
---------- Post added at 02:36 AM ---------- Previous post was at 02:26 AM ----------
My fav cdma tools are qpst, cdma workshop, dfs, revskill and bit advance is qxdm All are freely available. I cant say which one is best hahah. Trust me for me, all of them worked at some instance when i was stuck. Revskill is great with htc finding spc. Though i used dfs mostly.
Sent from my LGLS991 using Tapatalk

Categories

Resources