Database Develop

Any way to easily verify my phone is unlocked?

Other than using another provider's SIM card, that is. I believe I properly unlocked my Tilt and I want to sell it as such but I want to make sure it works correctly with someone other than At&t. Any help? Thanks.

Find a friend with tmobile and get his sim card. Place it in your Tilt and if there's coverage, it's unlocked, if not then it's locked.

Other than using another provider's SIM card, that is.
Click to expand...
Click to collapse
I don't know anyone with t-mobile.

pseudosuit said:
I don't know anyone with t-mobile.
Click to expand...
Click to collapse
I used a CID/SIM unlocker before my first flash and now after every hard reset/new flash there is a connection setup that connects me to ATT after I put in my SIM. I believe that means I am successfully unlocked, so you should get the same message.

the connection setup runs because the rom is used by potentially all carriers, so it figures out what carrier you are using and connects to it. not because you are unlocked
to the op search "kaiser CID/SIM unlocker" rub the program straight through FOLLOWING ALL DIRECTIONS IN THE THREAD. this means you must first read the thread and the thread will tell you what to do.
(spoon feeding)

tubaking182 said:
the connection setup runs because the rom is used by potentially all carriers, so it figures out what carrier you are using and connects to it. not because you are unlocked
to the op search "kaiser CID/SIM unlocker" rub the program straight through FOLLOWING ALL DIRECTIONS IN THE THREAD. this means you must first read the thread and the thread will tell you what to do.
(spoon feeding)
Click to expand...
Click to collapse
I don't need spoon fed. This is what I did to unlock the phone. What I am looking for is an alternate way to verify the phone is unlocked other than the program I used to unlock it. This is important because I do not want to sell the phone and have it not work for someone.

run the program \windows\simlock.exe , if it doesnt launch or launches with a blank screen, then your phone is unlocked

I was going to say that, but XtreMe_G beat me to it!
I can also verify that though: just run \Windows\SIMLock.exe and if nothing happens then you're unlocked. If the handset asks you for the subsidy code, then you are not unlocked.
--W5i2

pseudosuit said:
Other than using another provider's SIM card, that is. I believe I properly unlocked my Tilt and I want to sell it as such but I want to make sure it works correctly with someone other than At&t. Any help? Thanks.
Click to expand...
Click to collapse
Yes, there is an alternative way to check if your phone is unlocked. Go and purchase a prepay Tmobile phone. They're relatively cheap, it should come with a sim card with some minutes on it. I'm contracted w/ ATT, also have an ATT prepay account and 4 tmobile blank sim cards. All sims work with my unlocked phone. If it didnt, you'll get an error on the phone stating that the sim doesn't work (or something like that).

robosiris said:
Yes, there is an alternative way to check if your phone is unlocked. Go and purchase a prepay Tmobile phone. They're relatively cheap, it should come with a sim card with some minutes on it. I'm contracted w/ ATT, also have an ATT prepay account and 4 tmobile blank sim cards. All sims work with my unlocked phone. If it didnt, you'll get an error on the phone stating that the sim doesn't work (or something like that).
Click to expand...
Click to collapse
Would this work as well?
http://www.t-mobile.com/shop/phones...d&device=53299206-c069-429a-82fa-000007a2ac12

yes that will work, but didnt i just show how you can do it for free?

Please help, put in Sim card, shows 'no service'

Hi
I just got on at&T 8925, I put in sim card and it did not ask for unlock code, so I guess it is unlocked, I put in my sim card (Fido Canada,works in other phone) and it show "no service" can not find phone network signal.
I tried
ATT ROM 1.57.502.2 and
RUU_Kaiser_ROGERS_WWE_1.83.631.4_radio_sign_22.51.88.13_1.27.15.32R_Test.exe
radio 1.27.12.11 and 1.27.15.32
all same problem.
Can anyone help me, are these rom combinations not good? or something wrong with the device?
or anything I need to do?
thank you for your help !

Try another known-good SIM card. If you still cannot get service, then you probably have a hardware issue with the phone.

Sounds stupid, but did you make sure you put the SIM in the right way around.
You wouldn't believe how many people have not done this right.

Sounds like it's not unlocked... when I got mine it wasn't unlocked but it only asked for a code once.... just run the unlocker to be sure...

maybe to hard reset?

Hi thanks for everyone's help.
I think I put the sim card the right way , otherwise it will show 'no sim card'
I am keep trying other rom/radio; still no luck, it either keep searching or say 'no service'
I really hope it is not hardware problem.
hope if anyone has the experience and could help me
it really confuse me.
Thanks

alanalan11 said:
Hi thanks for everyone's help.
I think I put the sim card the right way , otherwise it will show 'no sim card'
I am keep trying other rom/radio; still no luck, it either keep searching or say 'no service'
I really hope it is not hardware problem.
hope if anyone has the experience and could help me
it really confuse me.
Thanks
Click to expand...
Click to collapse
welll this might be a little solution i read in another thread...sum times the phone will not read the sim becuz its not making enough contact to the phone...so maybe a little piece of paper on top of the sim then put it in the phone MIGHT help..if it doesnt then ur phone is jacked up =P
or
when i put my tmobile sim in my unlocked 8925 it worked and then a couple our couldnt get n e service... and i checked my brothers phone and dad and they didnt have service too... so maybe sumtimes the network will nto work for a while. or sumthing

If you go in the phone options and do a manual network search, does it find anything?

Thanks brian_v3ntura:
but I tried paper, same thing, maybe not be contact problem.
Thanks kilrah:
I tried that, it shows " cannot read setting from network, try viewing setting later or disconnect data connection and try again."
I did saw something online that maybe because the Fido sim card maybe old (about 3 years), but it did work with sth. like Samsung blackjack II. maybe Kaiser is more complicated.
just wonding if anyone have experience that old sim card may have problem with new phones.
I will keeping trying...

My SIM card is about 4 years old.
I'd bet your Kaiser has a hardware problem.

Hi, guys
I tried a friend's Fido sim card, it works, I don't what's the difference, but it is just like that, maybe I should go get a new card.
Thanks everyone.

good
as one of the boys ur sim might be damaged/old (power failure issues most likely)
alanalan11 said:
Hi, guys
I tried a friend's Fido sim card, it works, I don't what's the difference, but it is just like that, maybe I should go get a new card.
Thanks everyone.
Click to expand...
Click to collapse

yeah, just what confused me is that the sim card still work with my other phones.

Hey guys,
Long time lurker here... and I'm having the same problem.
I have a foreign (Cyprus CytaMobile Vodaphone) SIM in my Kaiser. A couple times over the last few days I was getting the "no service" but if I reset (turn on/off) the device it was fine. Today I cannot get service on it at all. I tried it in an unlocked 1G iPhone and it didn't seem to work either.
I thought maybe the SIM is dead, however when the device it's in starts up, it asks me for the PIN set on the SIM card. I enter the PIN, and it unlocks the SIM. How could the SIM be dead if the PIN authenticates? However, when I put my regular Canadian Rogers SIM in, it works fine.
Where it usually says "Searching.." on the home screen, I once got "Denied, searching.." but I haven't been able to reproduce it.
Any ideas? The provider doesn't have a local roaming agreement, however for the past year it has always registered on the network and allowed me to check balance and send text messages.
Is it most likely a dead SIM or blocked by Rogers? I'm doubting the blocked part, but the successful PIN entry is what has me baffled...
Thanks!
Chris

Ok different SIM card also from Cyprus Cytamobile in a SE w810 does the same thing. Is Rogers seriously all of a sudden blocking these? There is no local roaming agreement, however I would always get the Rogers welcome text's and even be able to check balances. I've been doing this off and on for 4 years...
Anyone ever heard of something like this?
Thanks,
Chris
P.S. Sorry, getting a bit off topic but I thought the initial problem was related!
EDIT: Ok, I can also see all the SIM contacts and SMS messages stored on the SIM.

alanalan11 said:
Hi
I just got on at&T 8925, I put in sim card and it did not ask for unlock code, so I guess it is unlocked, I put in my sim card (Fido Canada,works in other phone) and it show "no service" can not find phone network signal.
I tried
ATT ROM 1.57.502.2 and
RUU_Kaiser_ROGERS_WWE_1.83.631.4_radio_sign_22.51.88.13_1.27.15.32R_Test.exe
radio 1.27.12.11 and 1.27.15.32
all same problem.
Can anyone help me, are these rom combinations not good? or something wrong with the device?
or anything I need to do?
thank you for your help !
Click to expand...
Click to collapse
I also have the same problem with my tytn, I have a bad feeling it is hardware If you manage to find the problem please let me know. I have tried the paper thing and also all new firmware and OS nothing helps

Try setting it to GSM only (disable 3G) and see what happens.
To do that go to Settings->Personal->Phone->Band->Network Type=GSM.
If it works then, you might want to read this thread: http://forum.xda-developers.com/showthread.php?t=419803

Network Sim Unlock code missing

I just purchased a G1 from someone and when I placed a SIM that was not t-mobile in, it did not give me an unlock network code request. Does this mean that someone had tried and entered a wrong one? When there is no sim, it says no sim so i know that the phone at least realizes there's something in there.
TIA for any answers

viccyran said:
I just purchased a G1 from someone and when I placed a SIM that was not t-mobile in, it did not give me an unlock network code request. Does this mean that someone had tried and entered a wrong one? When there is no sim, it says no sim so i know that the phone at least realizes there's something in there.
TIA for any answers
Click to expand...
Click to collapse
Can you possibly try getting a T-Mobile SIM in there? Make sure things are connected first...

i also had a t-mobile sim that was disabled a while back. i plopped it in and low and behold it gave me the same thing. i get the registration screen, but there is the 5 bar signal thing with an x. same with the at&t sim

viccyran said:
i also had a t-mobile sim that was disabled a while back. i plopped it in and low and behold it gave me the same thing. i get the registration screen, but there is the 5 bar signal thing with an x. same with the at&t sim
Click to expand...
Click to collapse
Well testing with a dead SIM card, it's expected to give you those results. You need to register the phone with a T-Mobile SIM card first, then switch them out. See if that works :]

lukekirstein said:
Well testing with a dead SIM card, it's expected to give you those results. You need to register the phone with a T-Mobile SIM card first, then switch them out. See if that works :]
Click to expand...
Click to collapse
thanks, il ltry that tomorrow. tonight in the mean time, i had a g1 that i bricked (/cry) but i had it rooted and unlocked. the at&t sim worked fine. for that phone i put the sim in, and it requested an unlock code. I figured this phone would d o the same? also another strange thing is that when i looked at the apn settings there were none. i tried to add one but it wouldnt save. if that's any cause for concern please let me know =p

viccyran said:
thanks, il ltry that tomorrow. tonight in the mean time, i had a g1 that i bricked (/cry) but i had it rooted and unlocked. the at&t sim worked fine. for that phone i put the sim in, and it requested an unlock code. I figured this phone would d o the same? also another strange thing is that when i looked at the apn settings there were none. i tried to add one but it wouldnt save. if that's any cause for concern please let me know =p
Click to expand...
Click to collapse
How did you brick your phone?
Alright, let me know how it goes :]

overzealous with hero.. screwed things up. this is slightly bleh.. just wanted to get things workin, gotta go to tmobile to see if this thing works.. has anyone had a case where you just couldn't get a sim to work?

viccyran said:
overzealous with hero.. screwed things up. this is slightly bleh.. just wanted to get things workin, gotta go to tmobile to see if this thing works.. has anyone had a case where you just couldn't get a sim to work?
Click to expand...
Click to collapse
I gotta rain on your parade and say, I have always had flawless SIM cards :/. Let me know how that whole T-Mobile thing goes!
Actually, you may not have this second phone even unlocked yet. You have to get that code from T-Mobile before you can use other SIM cards.

Koodo phone won't be used on Rogers network.

I was planning on giving my uncle my ace and unfortunately when I put his sim in and try to connect to Rogers APN it says I'm unable to register on to the network. I put my sim in from my One V and it worked on that phone. I'm assuming it's carrier locked, how exactly can it be fixed if at all. Thanks.

chevymeister said:
I was planning on giving my uncle my ace and unfortunately when I put his sim in and try to connect to Rogers APN it says I'm unable to register on to the network. I put my sim in from my One V and it worked on that phone. I'm assuming it's carrier locked, how exactly can it be fixed if at all. Thanks.
Click to expand...
Click to collapse
the phone is locked. you need to get an unlock code. look on ebay or your local craigslist. you should be able to get it done for under $20

chevymeister said:
I was planning on giving my uncle my ace and unfortunately when I put his sim in and try to connect to Rogers APN it says I'm unable to register on to the network. I put my sim in from my One V and it worked on that phone. I'm assuming it's carrier locked, how exactly can it be fixed if at all. Thanks.
Click to expand...
Click to collapse
I've heard that cellunlocker.net works. It costs some money, but from what I've heard, it sounds pretty good!

Why I thought this wasn't the case is that my phone never asks for a code to be unlocked like these sites say, so I'm a little confused as to whether my phone is locked or unlocked.

chevymeister said:
Why I thought this wasn't the case is that my phone never asks for a code to be unlocked like these sites say, so I'm a little confused as to whether my phone is locked or unlocked.
Click to expand...
Click to collapse
There's probably a hidden menu that you have to access. I think if you get your code, specific for your device, they should give you clear instructions on how to get there... But they probably won't do it until you pay for it . I'll try and search around and see what I can find.
-------- edit ---------------------------------------------------------------
Alrighty! Here is the thread that you might be looking for. It's a bunch of hidden menus, and one of them might be the one you are looking for....
http://forum.xda-developers.com/showthread.php?t=1522003
However, I still don't know how to unlock the phone haha Sorry about that part, just giving a few suggestions

chevymeister said:
I was planning on giving my uncle my ace and unfortunately when I put his sim in and try to connect to Rogers APN it says I'm unable to register on to the network. I put my sim in from my One V and it worked on that phone. I'm assuming it's carrier locked, how exactly can it be fixed if at all. Thanks.
Click to expand...
Click to collapse
I think u should edit ur apn configuration and use rogers setting.. may be u can find the rogers setting in their web..

You didn't specify which ROM the Ace was running. If its a stock Samsung ROM, I'd expect it to ask for a code, but with CM7 or 9, it won't since those build lack some libraries to perform the actual unlock.
To get your code look into the bml5 method.

Cannot manually provision phone

Hello,
I have been trying to activate my new phone on ring plus. It is an LG LS991. I am on the ZV6 firmware. I have done a device swap and have been in contact with Ringplus. They said that everything that is OK on their end and my phone will not provision. I tried to enter ##MSL# and nothing happens. I do not see an edit menu. I am entering my actual MSL code just to clarify that. Is there a way to get a hidden menu on the G4 that will allow me to edit the MDN & MIN numbers?
Thanks!!!

Try ##873283#

Thanks did not work for me though. Would restoring a .tot and maybe reset it if its a software glitch?

##data#

Cannot really access anything from that menu, I am just returning the phone today because something is wrong with it.

LG g4 works on SIm card So u cannot provsion it mannualy
U need a Sprint Blank simcard to acitvate it

did you happen to modify your carrier folder from the sim unlock mod? Changing the permission of node.db and node.db-journal to all read write execute fixed the provision issue for me.

chwilson2013 said:
Hello,
I have been trying to activate my new phone on ring plus. It is an LG LS991. I am on the ZV6 firmware. I have done a device swap and have been in contact with Ringplus. They said that everything that is OK on their end and my phone will not provision. I tried to enter ##MSL# and nothing happens. I do not see an edit menu. I am entering my actual MSL code just to clarify that. Is there a way to get a hidden menu on the G4 that will allow me to edit the MDN & MIN numbers?
Thanks!!!
Click to expand...
Click to collapse
Any head way on this? How can you access the service menu to edit the MDN and MSID?
Thanks

I'm having the same problem. Can't get this G4 to work on old Sprint SERO - ESN is right but I can't update MIN or MDN any way I try. Anyone figure this out and could help?
thanks

mxsmith said:
I'm having the same problem. Can't get this G4 to work on old Sprint SERO - ESN is right but I can't update MIN or MDN any way I try. Anyone figure this out and could help?
thanks
Click to expand...
Click to collapse
You can try the hidden menu apk I listed in the gsm unlock page it might get you in to help

TheMadScientist said:
You can try the hidden menu apk I listed in the gsm unlock page it might get you in to help
Click to expand...
Click to collapse
Yeah, I had tried that. But it doesn't seem that any of the information will save properly; after a reboot, it still does not give me the right MDN. That is with or without the sim card. With the sim card ii, it gives me the last four of the cards ICCID as the phone number with 000-000-XXXX. Not sure if G4 just will not work b/c I don't have a SIM programmed (it is just an unused sprint sim)? But my sero plan is 3g only, really don't need the lte stuff or sim at all. Without sim card I just get MDN and phone number as 'unknown'.
I think this is probably easier with boost or another carrier; curious if ANYONE has ever activated a g4 on SERO basic?

mxsmith said:
Yeah, I had tried that. But it doesn't seem that any of the information will save properly; after a reboot, it still does not give me the right MDN. That is with or without the sim card. With the sim card ii, it gives me the last four of the cards ICCID as the phone number with 000-000-XXXX. Not sure if G4 just will not work b/c I don't have a SIM programmed (it is just an unused sprint sim)? But my sero plan is 3g only, really don't need the lte stuff or sim at all. Without sim card I just get MDN and phone number as 'unknown'.
I think this is probably easier with boost or another carrier; curious if ANYONE has ever activated a g4 on SERO basic?
Click to expand...
Click to collapse
is sero a gsm carrier or cdma

Its CDMA. Its true sprint, its just an old employee plan. I never added in the LTE/4G service.