Database Develop

[SOLVED] Air III (M5C5) at Mirek v7, how to flash the special kernal?

I switched from sikke1 Teclast X98 Air III & Air 3G debloated GoogleNow custom rom to mirek190 v7 rom. I hope to get a bit more power out of the device.
Now I want to flash the special camera kernal for the M5C5.The should be an otption to press "K" but I cannot find it in mireks flash tool?
Someone able to point me?
Thanks Stony2

And where I have to put the boot-air3-m5c5-moded.7z file or the boot.img which is in it?

SOLVED
Think the right way is to change the original boot.img in the ROM folder to the boot.img from the boot-air3-m5c5-moded.7z file. Done so works for me. You do as flashing but choose "K". (it is not a choice that is shown on the screen) But when you connect your device in DNX mode the only the boot.img file will be send.

So basically, first you flash the rom using mirek's tool, and then after you've finished installing the rom you again use mirek's tool to flash only the kernel by pressing K on your keyboard. Nice and clear

Stony2 said:
I switched from sikke1 Teclast X98 Air III & Air 3G debloated GoogleNow custom rom to mirek190 v7 rom. I hope to get a bit more power out of the device.
Now I want to flash the special camera kernal for the M5C5.The should be an otption to press "K" but I cannot find it in mireks flash tool?
Someone able to point me?
Thanks Stony2
Click to expand...
Click to collapse
Hi,
I am trying to install the mirek7 on my air III. can you help me please?
I downloaded this file X98_Air_3g_android_5.0_mirek190_v7.0.7z, from the drive ttps://drive.google.com/folderview?id=0B8BF9-TGlz-FbjlXU2VqVFJyZWs&usp=drive_web&tid=0B8BF9-TGlz-FfkhLa21GSFJtMFV5b3luNXBjZlcwUzZTUHlIaGtBalJOWHBaZEdMcTYtUTA#list .
1)I installed the two present drivers.
2) I pressed the power button plus vol + and -, and appeared a black screen with a small white "Entering DNX mode. Waiting for fastboot command" (is this the dnx mode?).
3)At this point I connected the tablet to my pc, I run the FLASH_tool_Teclast_x98_air_devices-v3.0 file in the folder.
But it appears "waiting for device", and nothing happens.
Can you help me? I do not really know what to do

How to restore to Factory Dual OS boot

Hi everyone,
last month I've installed Windows 10 on my device erasing the partitions to have all the 64GB available for WIN10.
Now I'd like to revert back to stock having the Dual OS Manager and 32 GB for each OS.
But I don't know at all how to do and where to download the Stock Images of the Two OS, The tools, and a guide.
Can someone help me?
Thanks in advance

really no one can help me?

gerazzo said:
really no one can help me?
Click to expand...
Click to collapse
You need to:
- Save all important files;
- Flash Android with repartitioning;
- Install Win10 x32 Home in the unused space (created by repartitioning procedure)..
See my signature.

I have same problem, but i can 't install android. If i try start DNX mode, i see only "BOM Selection switch (SW1B1) has been changed but can not take action, system will reset in 3 seconds...''
please help me

Infinix hot 2 boot loop after updating to marshmallow

Hi,
Please could you help me to find a solution for my infinix hot 2 it's now in a loop boot after I update it (from android I didn't flash any rom) to marshmallow.
I tried recovery mode (volume up + power when logo appears click/holdclick volume up ) but doesn't work seems like a security update make the recovery mode workable only after flash the phone please is there a solution to get into recovery mode?

kim13 said:
Hi,
Please could you help me to find a solution for my infinix hot 2 it's now in a loop boot after I update it (from android I didn't flash any rom) to marshmallow.
I tried recovery mode (volume up + power when logo appears click/holdclick volume up ) but doesn't work seems like a security update make the recovery mode workable only after flash the phone please is there a solution to get into recovery mode?
Click to expand...
Click to collapse
It appears you ran an OTA update on a rooted phone. That'll definitely brick your Hot 2.
All you need to do is either flash back the Lollipop firmware or the Marshmallow ROMDump we created.
Would be happy to guide you through fixing it if you can get a PC

hi I had same error too could you please guide how to fix this error.. thanks

You need to download the firmware first. Have you done this?

Hovatek said:
You need to download the firmware first. Have you done this?
Click to expand...
Click to collapse
I have the same issue with my Hot2 x510 2gb ram. I have downloaded the "Infinix X510 Hot 2 (2GB 16 GB)" backup from your collection thread 533. The first thing I noticed that it doesnot contain any scatter file.
I have downloaded SP flash tool ver 5.
I have also installed vcom drivers as per your tutorial.
I want to flash back to lollipop. Please advise.
My Skype: hannan.rauf
email: [email protected]
Thanks.
My bad ... I was looking in the wrong folder
Problem solved.
Thanks for the detailed tutorials ...

HELP
Hovatek said:
You need to download the firmware first. Have you done this?
Click to expand...
Click to collapse
HI, I've download the firmware. And run the SP flash tool, and just thick the recovery options, but it's seems stuck when i click download, it didnt show up the progress.

Usb connection problems after marshmallow update
Pls help. My infinix hot2 is no longer being detected by PC irrespective of any method selected.

hey please my infinix hot 2 is tucked on recoverry mode and it keeps going back when i reboot or on it

Please I'm having a problem with my infinix hot 2.
It has been on a boot loop for hours. It started this on it's own when I tried to turn it on.
What do I do

dualboot not working on Teclast x98 air 3g c5j6

Hello!
I have a Teclast x98 air 3g tablet (c5j6)
A while ago i decided to delete all the Chinese applications on the Android OS. After doing that i couldn't boot to the Windows OS.
I flashed the Android OS twice, each time with a different firmware but it didn't help.
I flashed the device with dual OS which i downloaded from Teclast website and it didn't help neither.
every time i restart the tablet it boots to the Android OS.
any ideas about how to fix it !?
Thank you!

When you run ( switch on ) device keep vol + .....

mirek190 said:
When you run ( switch on ) device keep vol + .....
Click to expand...
Click to collapse
Thank you!

Kazam Tornado 348 stuck at Factory Mode

Hi
i was trying to install a new Android on my Kazam 348 but unfortunately my phone is bricked.
i used Gionee and wiped off everything, the only things that comes up now is Gionee Logo when i turn it on.
when i try to put it in recovery mode, Factory mode comes on and it shows the following options
P.S I dont have a windows PC.
Auto Test
Manual Test
Item Test
Test Report
Deubug Test
Clear eMMC
Version
Reboot
is there anyway i could install any operating system on it and bring back to use ?
i dont have any android OS that i could install on it.
i also have very little knowledge of what to do with an android like this.
i will really appreciate if someone could help please.
thank you

i dont have a windows PC

can some one please help ?

http://www.needrom.com/download/kazam-tornado-348/
stock rom for kazam 348