Hello!
I have a Teclast x98 air 3g tablet (c5j6)
A while ago i decided to delete all the Chinese applications on the Android OS. After doing that i couldn't boot to the Windows OS.
I flashed the Android OS twice, each time with a different firmware but it didn't help.
I flashed the device with dual OS which i downloaded from Teclast website and it didn't help neither.
every time i restart the tablet it boots to the Android OS.
any ideas about how to fix it !?
Thank you!
When you run ( switch on ) device keep vol + .....
mirek190 said:
When you run ( switch on ) device keep vol + .....
Click to expand...
Click to collapse
Thank you!
Related
Hi!
I'm new to all this flashing stuff but i managed to install cyanogenmod 10 but after using it,appeared an update to cyanogenmod 10.1,after that update made automatically by the phone,google play stopped working.
I installed gapps and after that it was blocking in the lockscreen.
Scared i restored data and then it won't pass Galaxy S screen.
Please help me!:crying:
MISU123456 said:
Hi!
I'm new to all this flashing stuff but i managed to install cyanogenmod 10 but after using it,appeared an update to cyanogenmod 10.1,after that update made automatically by the phone,google play stopped working.
I installed gapps and after that it was blocking in the lockscreen.
Scared i restored data and then it won't pass Galaxy S screen.
Please help me!:crying:
Click to expand...
Click to collapse
upload it by Odin should help
or try first
wipe data / factory reset and wipe cache partition
speedy .sh / Wk6Vm/ AriesVE.ops
speedy .sh / wtmdf/ Boot-loader.tar
Odin doesn't recognize my phone despite i have all dirvers installed.
Thanks for interest
MISU123456 said:
Odin doesn't recognize my phone despite i have all dirvers installed.
Thanks for interest
Click to expand...
Click to collapse
enter it in download mode and connect it to your computer.
download mode =
Turn off your phone and hold
vol down + power + home
have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Yes i connected the phone in download mode and doesn't work,the computer makes a noise that it is connected but Odin nothing.
Thank you for help.
Hello,
I have a samsung galaxy s plus, but I had the same problem after installing a rom based on CM10.1 and its gapps.
I solved with Odin, as you have been already suggested, reinstalling the stock rom.
I had problems installing the drivers for my sgs + on the PC because I had installed windows 8. What operating system do you have (on the PC)?
(could be a driver problem, otherwise odin recognize the phone immediately)
-Matto- said:
Hello,
I have a samsung galaxy s plus, but I had the same problem after installing a rom based on CM10.1 and its gapps.
I solved with Odin, as you have been already suggested, reinstalling the stock rom.
I had problems installing the drivers for my sgs + on the PC because I had installed windows 8. What operating system do you have (on the PC)?
(could be a driver problem, otherwise odin recognize the phone immediately)
Click to expand...
Click to collapse
I also have windows 8 x64 and I have no problems with drivers. possible that you have bad options in Odin selected. Do it like in the picture
imageshac k. us/f / 152/ beztytuulmf. png/
I received my Teclast X98 Air 3G (C5J6) before 3 days
Some time the screen start to blinking with a noisy colored screen for about seconds and then the tablet shutdown by itself
It happened about 4 or 5 times in this 3 days
What is the problem
is it software problem or hardware problem
and can I do any thing to fix it ??
Try data factory first .
If not help try to flash my rom.
mirek190 said:
Try data factory first .
If not help try to flash my rom.
Click to expand...
Click to collapse
OK
I have your ROM already
and after install it the tablet did not start up then install it again with Intel MFT and worked
I'll try data factory
If not Then trying official ROM
Thank you
mirek190 said:
Try data factory first .
If not help try to flash my rom.
Click to expand...
Click to collapse
I tried data factory, your V6 ROM, official Rom ... etc
No improvement nothing of this fixed the problem
I want to know if it is a firmware or hardware problem
Hi all,
I am very worried because while trying to install the Mirek v 6.1, something went wrong and now I can only boot Windows 10.
The android option is gone from the OS selection menu.
I can really do nothing with the android partition. Does anybody know how can I restore the original ROm or install Mirek ?
Thanks in advance
I cant go to Recovery mode
Wait till tomorrow ( today ? ) I made a new tool that wotks form dnx like MFT .
Or you can use MFT to flash the rom .
Dear Mirek!
Is there possibility to flash the BIOS from DNX mode, maybe in your new tool?
Please see this post:
http://forum.xda-developers.com/showpost.php?p=64582331&postcount=13724
Regards: Zsolt
I fixed it thanks!
How fixed?
I switched from sikke1 Teclast X98 Air III & Air 3G debloated GoogleNow custom rom to mirek190 v7 rom. I hope to get a bit more power out of the device.
Now I want to flash the special camera kernal for the M5C5.The should be an otption to press "K" but I cannot find it in mireks flash tool?
Someone able to point me?
Thanks Stony2
And where I have to put the boot-air3-m5c5-moded.7z file or the boot.img which is in it?
SOLVED
Think the right way is to change the original boot.img in the ROM folder to the boot.img from the boot-air3-m5c5-moded.7z file. Done so works for me. You do as flashing but choose "K". (it is not a choice that is shown on the screen) But when you connect your device in DNX mode the only the boot.img file will be send.
So basically, first you flash the rom using mirek's tool, and then after you've finished installing the rom you again use mirek's tool to flash only the kernel by pressing K on your keyboard. Nice and clear
Stony2 said:
I switched from sikke1 Teclast X98 Air III & Air 3G debloated GoogleNow custom rom to mirek190 v7 rom. I hope to get a bit more power out of the device.
Now I want to flash the special camera kernal for the M5C5.The should be an otption to press "K" but I cannot find it in mireks flash tool?
Someone able to point me?
Thanks Stony2
Click to expand...
Click to collapse
Hi,
I am trying to install the mirek7 on my air III. can you help me please?
I downloaded this file X98_Air_3g_android_5.0_mirek190_v7.0.7z, from the drive ttps://drive.google.com/folderview?id=0B8BF9-TGlz-FbjlXU2VqVFJyZWs&usp=drive_web&tid=0B8BF9-TGlz-FfkhLa21GSFJtMFV5b3luNXBjZlcwUzZTUHlIaGtBalJOWHBaZEdMcTYtUTA#list .
1)I installed the two present drivers.
2) I pressed the power button plus vol + and -, and appeared a black screen with a small white "Entering DNX mode. Waiting for fastboot command" (is this the dnx mode?).
3)At this point I connected the tablet to my pc, I run the FLASH_tool_Teclast_x98_air_devices-v3.0 file in the folder.
But it appears "waiting for device", and nothing happens.
Can you help me? I do not really know what to do
Hi everyone,
last month I've installed Windows 10 on my device erasing the partitions to have all the 64GB available for WIN10.
Now I'd like to revert back to stock having the Dual OS Manager and 32 GB for each OS.
But I don't know at all how to do and where to download the Stock Images of the Two OS, The tools, and a guide.
Can someone help me?
Thanks in advance
really no one can help me?
gerazzo said:
really no one can help me?
Click to expand...
Click to collapse
You need to:
- Save all important files;
- Flash Android with repartitioning;
- Install Win10 x32 Home in the unused space (created by repartitioning procedure)..
See my signature.
I have same problem, but i can 't install android. If i try start DNX mode, i see only "BOM Selection switch (SW1B1) has been changed but can not take action, system will reset in 3 seconds...''
please help me