Database Develop

MIUI Global Oreo Beta, Nightly Build Download Links

I have created an automated list of the Oreo nightly builds, so you can go to check the latest one whenever you want, and get download link and changelog link.
https://funkyhuawei.club/mimix2builds
This has a full index of all Oreo builds, and is updated every six hours.
I can't offer any support or any guarantee it will stay up, or that the links will work, or that it will continue to find new builds, but so far it works.

It helps a lot! Thanks!
Sent from my Mi MIX 2 using Tapatalk

Very very thanks to U.....

Great news, thank you very much.
If i flash this nightly build, does i recive OTA updates ?
Greetings

How do I flash?
Always get Error 7, flashed Global beta first, but no change in getting error 7

exception84 said:
How do I flash?
Always get Error 7, flashed Global beta first, but no change in getting error 7
Click to expand...
Click to collapse
Flash Oreo twrp

allrockedout said:
Flash Oreo twrp
Click to expand...
Click to collapse
you hab a link for it. pls?

exception84 said:
you hab a link for it. pls?
Click to expand...
Click to collapse
Ive noticed on first install it wont boot. So to fix this, wipe data in twrp, flash rom first than let it boot to system without flashing magisk. Than connect to pc and flash oreo twrp again because twrp replaced with stock recovery. Than follow below instructions.
Also I've noticed sometimes you need to flash magisk 14.5...2 times for it to boot.
Oreo twrp 3.2.1.0
https://drive.google.com/file/d/1LFyPJu6Uk7bkqdwbsswHWt2Q_pZFVghG/view?usp=drivesdk
---------- Post added at 05:29 PM ---------- Previous post was at 05:28 PM ----------
install Oreo beta in twrp. Reboot back into twrp. Than flash magisk 14.5. it's the only one that will boot for me. Than reboot.
magisk 14.5
https://drive.google.com/file/d/1domz8I7JVFdNS68nfWQaaqaRyAJteVxO/view?usp=drivesdk

What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.

itsdan313 said:
What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.
Click to expand...
Click to collapse
Yes, thats actually my problem now. happening the same for me
---------- Post added at 05:46 PM ---------- Previous post was at 05:37 PM ----------
itsdan313 said:
What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.
Click to expand...
Click to collapse
try first boot without flashing magiskbefore, then it worked for me.

itsdan313 said:
What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.
Click to expand...
Click to collapse
Does it boot if you don't flash magisk?

Mackay53 said:
Does it boot if you don't flash magisk?
Click to expand...
Click to collapse
Haven't tried to flash without magisk, but would it make sense? Seems most people I have read are able to do so. Formatting data only with the Oreo twrp correct?

itsdan313 said:
Haven't tried to flash without magisk, but would it make sense? Seems most people I have read are able to do so. Formatting data only with the Oreo twrp correct?
Click to expand...
Click to collapse
Yeah don't need to flash magisk but will loose Oreo recovery.

Regarding flashing them, an alternative to using twrp is flashing with fastboot -- If there is interest I might make a tool to help with that.

Just installed latest Build.
Runs super fluid, no major issues so far.
Just noticed that some settings in Chronos causing a force close, nothing too important.
And iphone X gestures are goddamn awessome!

FYI new build is up. 8.1.18 -- check link in original post for download link. Changelog just mentions stability fixes.

duraaraa said:
Regarding flashing them, an alternative to using twrp is flashing with fastboot -- If there is interest I might make a tool to help with that.
Click to expand...
Click to collapse
I might be interested to try that out!

itsdan313 said:
I might be interested to try that out!
Click to expand...
Click to collapse
There is a fastboot application that works really well.

I am unable to alter the brightness on the Oreo TWRP. Anyone have any ideas? Thanks

is dirty flash possible? Or via update function in miui?
Or do I have to setup the mix2 new every time?
(Just ask before flashing new build)

[HELP] Bootloop with any Oreo Rom...

Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.

newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
I have the same problem?!

Nobody for help a desesperate newbie ..?

newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Try full wipe, flash ROM ,gapps ,magisk and reboot.

Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.

Try this!
-Your data and cache Partition must be in ext4 format.
-Enter in twrp recovery wipe Dalvik, system, data and cache Partition.
-reboot to recovery
-install just the ROM zip without gapps ir another addon
- reboot to system
If the boot is not sucessfull, reboot to twrp and wipe data Partition only.
-if the boot is sucessfull, reboot to twrp install gapps and reboot to system again.
After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot
Ps- this last boot takes a Little more time dont sorry
Hope i helped

newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
Sr
---------- Post added at 06:07 AM ---------- Previous post was at 06:03 AM ----------
newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Answered as below
S r
{
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
}
---------- Post added at 06:14 AM ---------- Previous post was at 06:07 AM ----------
newbie_or_not_newbie said:
Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.
Click to expand...
Click to collapse
Here you go
once installation of new ROM and Gapps as well.
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, but it will take 5mins at least to login. All the best...
S r

Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)

newbie_or_not_newbie said:
Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)
Click to expand...
Click to collapse
In that case , in the last step, instead of swipe to factory reset, format only data Partition, and reboot!
Try that
If after the reboot , you are in bootloop, reboot again to twrp and format data Partition again!

Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?

newbie_or_not_newbie said:
Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?
Click to expand...
Click to collapse
Today, i flashed a new Oreo ROM! I passed all the difficulties that you already described! I remember that i read Somewhere in xda to remove sdcard and sim trata, on the last step (after flash ROM, boot, flash gapps boot, format data Partition, and then remove sim tray and boot again) . The boot occurs normally, 2-3 minutes later Google configuration wizard pops on screen. I think the problem is Oreo adjacent, or a encription problem! Don't know exactly...

Try to install micro gapps instead of pico apps
If the phone starts make your settings an go to Recovery.
Backup your data.
Make factory reset
Install rom
Now you can install pico gapps
Restore data
Restart

I have the same problem ,
with all of the oreo roms ,
if i do not flash the gapps phone does not bootloop
i tried pico/mini/nano gapps

Hi
So, do you think it could be ok if I flash micro or stock gapps ?
Like @sptepacate, if I don't flash gapps, the phone boots.
If I flash gapps then, the phone boots but google account bootloops...

Hurray !
I followed every step of @Speaker87, with extract of sim tray...
Now, I'm using AEX oreo 8.1 on santoni....
Thanks a lot for help !

Thank you , worked for me too for Nitrogen OS

Glad i could help!

Best way is :
- Wipe - Format data - type "yes" - ok.
- and then install newest TWRP

i've tried all the steps provided but i still get bootloop

OxygenOS 5.0.6 for the OnePlus 3 & 3T Release - (full zip)

Changelog:
System
Updated Android security patch to 2018.9
General bug fixes and improvements
https://forums.oneplus.com/threads/oxygenos-5-0-6-ota-for-the-oneplus-3-3t.915787/
LINK(full zip)OP3: https://meocloud.pt/link/ce4bc8a6-8...gen_16_OTA_068_all_1809142124_2a02b49828.zip/
OP3T: https://drive.google.com/uc?id=1dBtV55bhnrGMn0gzVXIiW4TEzxxIl8yb&export=download

Pulling IT down...

I updated my Firmware+Modem collection for the newest Stable 5.0.6 Update!
Thank you for the download link of the full zip!

I'm in beta 39 of OP3, if I install this version will I lose my data? Will I have to give full wipe?

Any MD5 yet for the zip? Thanks!

BakuretsuBaka said:
I'm in beta 39 of OP3, if I install this version will I lose my data? Will I have to give full wipe?
Click to expand...
Click to collapse
If you are on open beta, you have to do clean install, wipe everything except internal storage, so you will lose data

Been running 5.0.6 for a few days now and don't see any issues.

Hi, need help.
My phone keep booting to recovery after flashed the zip file.
On my phone:
Magisk
Substratum theme engine

Shahrulsite said:
Hi, need help.
My phone keep booting to recovery after flashed the zip file.
On my phone:
Magisk
Substratum theme engine
Click to expand...
Click to collapse
Try clean flash, I used this zip from day one till now. All good here.

First time with oneplus 3 I got 6 hrs SOT with OOS 5.0.6 +moderate use.

someone has the recovery Oxygen 5.0.6 stock? since one plus what has been deleted from the web and I can not install by adb sideload.

th3binary said:
someone has the recovery Oxygen 5.0.6 stock? since one plus what has been deleted from the web and I can not install by adb sideload.
Click to expand...
Click to collapse
You can simply dirty flash OOS 5.0.6 if you have TWRP and you will have stock recovery.

tnsmani said:
You can simply dirty flash OOS 5.0.6 if you have TWRP and you will have stock recovery.
Click to expand...
Click to collapse
I get installation error if I try to install by twrp, but in the end and got the recovery, I leave it here, in case someone needs it.
https://www60.zippyshare.com/v/ZMUHt0N3/file.html

Flash rom
Can I flash this using twrp without encryption like a custom ROM?

mvgharat said:
Can I flash this using twrp without encryption like a custom ROM?
Click to expand...
Click to collapse
I don't think so, moreover, it will replace your twrp recovery so you'll need to flash it back.

Can I just flash it from twrp, with not encrypted data, obviously after cleaning just data and system, without formatting?
(I don't care if recovery gets overwritten).
---------- Post added at 03:28 ---------- Previous post was at 03:28 ----------
Can I just flash it from twrp, with not encrypted data, obviously after cleaning just data and system, without formatting?
(I don't care if recovery gets overwritten).

[James] Moto E5 Play won't boot into Custom ROM(s)

Device variant: XT19121-2 James
Chipset: MSM8920
After repeated failed flashes I am on stock firmware using this guide. Phone boots and works normally right now, but I can't seem to flash any Custom ROMs on to my phone. I was using this post to flash Lineage OS 15.1, which worked successfully at first, but the WiFi wasn't working so I reflashed it. It still didn't work so I did it again, wiping Dalvik/Cache too. After the second flash attempt, my phone began to only flicker on and off. I made sure to always clean flash, factory resetting, wiping Cache and Dalvik, even formatting data, but no matter what I do it doesn't work. Also attempted other GSI images (arm, A-only) like AOSP, ResurrectionRemix and phhusson's Lineage OS 15.1 But they all failed too. I am using TWRP for James v 3.3.1 although I did also try other TWRP images like v 3.2.1 . But it makes no difference. Also used Magisk v19 like some guides suggested but whether I have Magisk or not, it doesn't work. Even made sure to push the fstab.qcom file to /vendor. Anytime a Custom ROM is flashed whether zip or GSI img it goes past the initial "bad key" or "N/A" screen and starts flickering on and off. Bootloader and TWRP works fine, but that's about it. Everytime a flash fails I go back to stock firmware (which always works) and try another ROM. I wonder why the first attempt worked but doesn't anymore even if I mirror the exact steps I took from stock. If anyone has any solutions I would be really grateful. Let me know if you need any more information.

have you taken any recent OTA updates?

mikeshutte said:
have you taken any recent OTA updates?
Click to expand...
Click to collapse
Nope. Still on the 8.0.0 version the stock firmware comes in.

tkhan7916 said:
Nope. Still on the 8.0.0 version the stock firmware comes in.
Click to expand...
Click to collapse
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
tkhan7916 said:
Nope. Still on the 8.0.0 version the stock firmware comes in.
Click to expand...
Click to collapse
mikeshutte said:
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
Click to expand...
Click to collapse
I also just noticed you are using the latest version of TWRP 3.3.1. I'm not sure if you originally rooted and installed TWRP with the original patched version by Cody or not, but if so make sure with the new version that you format your data partition to f2fs. As this will ensure correct mounting of the data partition.

mikeshutte said:
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
Click to expand...
Click to collapse
Followed these steps exactly, including formatting the data partition to f2fs, and the same problem still persists. Screen just keeps turning on and off in a loop without booting into the ROM. I downloaded the Lineage OS 16.0 GSI A-only Arm version for reference.

I am having the same issue
Using XT1921-1
Latest TWRP
Have tried LOS 15, LOS 16, AOSP 8.1, AOSP 9.0
Have tried flashing in fastboot and TWRP
Have tried every combo of wipe/factory reset/format data and magisk flash possible
have tried stock recovery, have tried no verity, have tried stock boot.img
nothing works. only able to produce powered on (black and blank) screen that turns on and off for a minute before returning to bootloader
PLEASE HELP
think i might need a 8.0 GSI but cant find one anywhere

I eventually got RR to boot on the james xt-1921-3 I installed XT1921-3_JAMES_T_MPCS_8.0.0_OCPS27.91-150-5-1-3_cid21 as a base, then used boot and vendor partitions from JAMES_T_OCP27.91-51-4_cid21_subsidy-TMO_RSU_regulatory-DEFAULT_CFC and it finally worked.

tkhan7916 said:
Followed these steps exactly, including formatting the data partition to f2fs, and the same problem still persists. Screen just keeps turning on and off in a loop without booting into the ROM. I downloaded the Lineage OS 16.0 GSI A-only Arm version for reference.
Click to expand...
Click to collapse
Message me, I'll host a TWRP backup for the XT-1921-3 that boots RR 6.1

Download the file from this post https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 , then using fastboot, flash the vendor and boot img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
then boot into recovery and flash the file from that post to disable dm-verity and force encrytion, after that flash magisk, then reboot to bootloader, at command prompt-
fastboot erase userdata
fastboot erase cache
fastboot reboot
that should get you booted - profit

mrbox23 said:
Message me, I'll host a TWRP backup for the XT-1921-3 that boots RR 6.1
Click to expand...
Click to collapse
Do you still have that back up by any chance and could ypu send it to me?

Anyone knows how to flash gsi roms on this device?

I tried to flash different gsi images and always get bootlop to fastboot mode.

jlorf7 said:
I tried to flash different gsi images and always get bootlop to fastboot mode.
Click to expand...
Click to collapse
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.

jlorf7 said:
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.
Click to expand...
Click to collapse
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks

rajnathr said:
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks
Click to expand...
Click to collapse
I know but with aonly always boot to fastboot mode, check in this it shows ab https://github.com/phhusson/treble_experimentations/wiki
I posted a mini guide in another thred: https://forum.xda-developers.com/showthread.php?p=80641265
Enviado desde mi NX629J mediante Tapatalk

I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!

Irwan Fauzi said:
I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!
Click to expand...
Click to collapse
This Friday hope I will be testing maximum no. of GSI image and will be posting which boots and working better for Redmagic 3 in a separated thread for discussion with the community.
Also will backup such as Game launcher, LED Strip and other important app using titanium backup and will try to install as system to check if they are working or not.

Just flash the Chinese rom then flash TWRP and then go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development and pick any rom you want some of them even have GAPPS included
---------- Post added at 04:37 PM ---------- Previous post was at 04:31 PM ----------
If you're having trouble with GAPPS follow this steps
1) Boot into TWRP
2) Flash latest GSI img
3) Resize system file system (necessary on my device otherwise gapps will not install)
- Wipe -> Advanced -> select system -> resize file system
4) Flash pico or mini or aroma which ever you want gapps zip
6) Flash magisk zip
7) reboot

every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you try ab version?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???

Irwan Fauzi said:
Did you try ab version?
Click to expand...
Click to collapse
yes
suzook said:
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???
Click to expand...
Click to collapse
yes, yes and yes

I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Do you mind testing if game space work?

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.

Irwan Fauzi said:
Do you mind testing if game space work?
Click to expand...
Click to collapse
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
vimalrajan1988 said:
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.
Click to expand...
Click to collapse
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.

Red magic 3 treble
That's the thing with this phone. Everything is random. I did use the repair tool and flashed the latest global version. But I am unable to flash the gsi again. It keeps getting stuck in fastboot screen. But if I select recovery from fastboot. It does goes to twrp recovery. But nothing after that. I hope someone can make a custom rom with Nubia launcher.

Red magic NEEDS to provide us with fastboot images...We have no real way to recover from a semi brick WTF!

h4cxxc0r3 said:
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.
Click to expand...
Click to collapse
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.

Irwan Fauzi said:
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.
Click to expand...
Click to collapse
What app did you use to covert the .br file? Trying to make fastboot .IMG files.

suzook said:
What app did you use to covert the .br file? Trying to make fastboot .IMG files.
Click to expand...
Click to collapse
I use termux app from play store.. There's a guide on xda how to extract system.dat.br without pc.. link