Database Develop

[Recovery][BKL][EMUI 8.x][Unofficial]TWRP 3.2.1-0 working recovery from View 10

Backup your stock recovery per this post. If you are too lazy, I can upload my backup from .104 build (C432) to Mega.
Download twrp_bkl_0.7.img from this post and place it in same directory with your ADB.
After successful backup as precaution disable any locks like pattern/PIN/password/fingerprint, reboot to bootloader (fastboot):
Code:
adb reboot bootloader
Then flash new TWRP recovery:
Code:
fastboot flash recovery_ramdisk twrp_bkl_0.7.img
After successful flash reboot device and immediately after confirming command below unplug USB cable and HOLD and keep holding VOLUME UP button, if you won't the new recovery will be overwritten by stock and you can try again.
Code:
fastboot reboot
Tested by myself on Honor 10 8.1.0.104 (C432) with unlocked bootloader and installed already Magisk 16.4 with Magisk manager 5.7.0, Magisk ramdisk persisted after installing TWRP recovery, system boots normal.
Next step after unlocking BL, installing Magisk, installing TWRP recovery -> flashing GSI AOSP, LOS or RR. Only reason I bothered with installing TWRP was that GSI image of LOS and RR don't include opengapps, only AOSP does, so without TWRP you can't have opengapps with these two GSI ROMS.

PeterMarkoff said:
Backup your stock recovery per this post. If you are too lazy, I can upload my backup from .104 build (C432) to Mega.
Download twrp_bkl_0.7.img from this post and place it in same directory with your ADB.
After successful backup as precaution disable any locks like pattern/PIN/password/fingerprint, reboot to bootloader (fastboot):
Code:
adb reboot bootloader
Then flash new TWRP recovery:
Code:
fastboot flash recovery_ramdisk twrp_bkl_0.7.img
After successful flash reboot device and immediately after confirming command below unplug USB cable and HOLD and keep holding VOLUME UP button, if you won't the new recovery will be overwritten by stock and you can try again.
Code:
fastboot reboot
Tested by myself on Honor 10 8.1.0.104 (C432) with unlocked bootloader and installed already Magisk 16.4 with Magisk manager 5.7.0, Magisk ramdisk persisted after installing TWRP recovery, system boots normal.
Next step after unlocking BL, installing Magisk, installing TWRP recovery -> flashing GSI AOSP, LOS or RR. Only reason I bothered with installing TWRP was that GSI image of LOS and RR don't include opengapps, only AOSP does, so without TWRP you can't have opengapps with these two GSI ROMS.
Click to expand...
Click to collapse
Nice work. ?

tried to install GSI RR OS, but ending in bootloop, also even after resizing system partition to maximum (TWRP / wipe / resize) opengapps still showing error 70 about insufficient space (which makes no sense, so they really seem to have wrong detection of A/B instead of A for Huawei/Honor devices), though these gzr gapps seem to install successfuly, now if I could figure out the damn bootloop
potential reasons for bootloop - previously installed magisk, wiped also system not only data/cache, installed through fastboot while TWRP there and not only stock recovery, ???
edit: i guess will try flash GSI through TWRP again, quite a waste time to wait each time like 9-10 minutes to find out it can't boot
edit 2: so even flashing through TWRP doesn't help, just stuck on android animation for 10 minutes and then it restarts (and even if you do fatory reset through huawei erecovery it doesnt change anything). maybe can try to restore everything and not wipe system before installing, just factory reset through TWRP (though I remember I read somewhere it's not reliable and it is better to do it through system, but I think that one wipe also internal storage which I wanna avoid)? back to rooted EMUI with TWRP for now, don't have time to try various combinations
edit 3: flashing over TWRP backup without wiping system doesn't help, so it seem it's gonna be magisk or replaced stock recovery i guess, otherwise no idea

BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?

PeterMarkoff said:
BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?
Click to expand...
Click to collapse
Don't be disappointed the lack of feedback from users is not many power users have got their hands on this model.
And also we are having different builds.
From the day one I am trying to rebrand my device but no success .
Once I have rebranded to EU I will try and let you know.
Did you flash open gapps nano package through twrp in gsi image?
Did it give you the same error?

tried just pico opengapps as on all phones i flash, that's the smallest, but always end up with error 70 not enough space despite resized system partition in TWRP and many GB available, the other unofficial GZR zero gapps build i mentioned seem to be flashed successful in TWRP, but in any case no luck with booting

PeterMarkoff said:
tried just pico opengapps as on all phones i flash, that's the smallest, but always end up with error 70 not enough space despite resized system partition in TWRP and many GB available, the other unofficial GZR zero gapps build i mentioned seem to be flashed successful in TWRP, but in any case no luck with booting
Click to expand...
Click to collapse
Did you format your phone before trying GSI ?
Try formatting phone and remove some system apps and then flash gapps it will mostly solve the problem.

PeterMarkoff said:
BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?
Click to expand...
Click to collapse
Don't be upset – e.g. I didn't receive my Honor 10 yet. You won't be the only one for sure, you're just the first one to do it, which is super nice for others because it motivates them to do so as well!
Just wondering: does it make a difference for TWRP wether I own the 6gb or 4gb version?

miststudent2011 said:
Did you format your phone before trying GSI ?
Try formatting phone and remove some system apps and then flash gapps it will mostly solve the problem.
Click to expand...
Click to collapse
I did factory reset (data, both cache) and also wiped system partition, gapps would be the least issue, as I said that GZR should work, but my system doesn't boot, no matter how times I wipe everything through TWRP or stock recovery after flashing system.img, since they say it's normal to hang at first boot and then wipe and then it should boot, but it doesn't work for me. also of course tried to power off phone since some people said it helps to do it after flashing. what I haven't done it's fastboot -w which should be some better wipe. some people say also you should remove magisk ramdisk, though I forgot to back up original, backed up just stock recovery. and also I haven't tried to flash everything with stock recovery, though first flash I did was through fastboot anyway and not through TWRP and it didn't make difference
so last few things left to try:
- fastboot -w for total wipe of data (better than TWRP? though it should be same as Format data in TWRP which wipe everything including internal storage which I wanna avoid since backing up 15GB TWRP backup file it's kinda annoying and my system has problem to do it)
- flash with stock recovery (I have backup, no big deal)
- remove magisk ramdisk and flash with stock ramdisk (forgot to make backup, can't replace)
though I am tired of it for now, spend last night like 4 hours dealing with it until 2AM and I also need to take care of children
vollkornbaguette said:
Don't be upset – e.g. I didn't receive my Honor 10 yet. You won't be the only one for sure, you're just the first one to do it, which is super nice for others because it motivates them to do so as well!
Just wondering: does it make a difference for TWRP wether I own the 6gb or 4gb version?
Click to expand...
Click to collapse
I don't think RAM has something to do with anything, but that sounds like Chinese version since EU has always 4GB and only difference is storage, so you will have different ROM

PeterMarkoff said:
(...)
so last few things left to try:
- fastboot -w for total wipe of data (better than TWRP?)
- flash with stock recovery (I have backup, no big deal)
- remove magisk ramdisk and flash with stock ramdisk (forgot to make backup, can't replace)
Click to expand...
Click to collapse
So I just read more about the GSI/Treble stuff and it said somewhere that modifications like Magisk probably lead to problems with the GSI flash.
Which is why I would try to get rid of the magisk ramdisk first.
I'm not an expert in this at all but maybe this helps.
---
PeterMarkoff said:
I don't think RAM has something to do with anything, but that sounds like Chinese version since EU has always 4GB and only difference is storage, so you will have different ROM
Click to expand...
Click to collapse
Indeed I bought the chinese 6gb RAM Version (hope this won't turn out as a big mistake)

vollkornbaguette said:
So I just read more about the GSI/Treble stuff and it said somewhere that modifications like Magisk probably lead to problems with the GSI flash.
"Your device is free of any heavy modifications such as the
Click to expand...
Click to collapse
yeah, now if someone could extract for me from 0.104 firmware for C432 that stock ramdisk, because I have some problems with mega to download it and I just need the stock ramdisk, nothing else, I have stock recovery backup but forgot to make ramdisk backup
edit: completely forgot there is option to "Completely uninstall" in Magisk manager, so tried it though even after restart with magisk manager missing i could still use root apps, so not sure how exactly this "complete uninstall" works, but anyway giving it a try after this and wiping data, installed system.img again, again wiped, rebooted and as usual loading and loading and nothing, seem can't further continue without copy of stock ramdisk to flash, tried downloading the big update from mega to extract it but it always fail for me to download, same with trying to copy my TWRP backup because for sure ain't gonna doi fastboot -w and setting up everything from scratch in case even this doesn't help, if I knew it works for sure and it will load new system which I will have to set up then no problem, but in this case...
edit 2: tried to replace magisk ramdisk with ramdisk from Honor View 10 BKL09 (same as our working TWRP) but it seem I end up after flashing it, wiping and flashing system.img in TWRP/erecovery bootloop, it's not showing android booting logo like before (but hey at least no need to wait 10 minutes to find it's fail) and either go to huawei ercovery, if I perform factory reset there then it boots to TWRP, but can't boot anywhere else besides these two

pass
I requested this image. Recovery has been established. When I enter the recovery, it requires a password to decrypt the system partition, I enter it (the same after switching on the phone), but a message is displayed that the password is incorrect. help me please.

told you in OP disable all passwords before flashing

PeterMarkoff said:
yeah, now if someone could extract for me from 0.104 firmware for C432 that stock ramdisk, because I have some problems with mega to download it and I just need the stock ramdisk, nothing else, I have stock recovery backup but forgot to make ramdisk backup
edit: completely forgot there is option to "Completely uninstall" in Magisk manager, so tried it though even after restart with magisk manager missing i could still use root apps, so not sure how exactly this "complete uninstall" works, but anyway giving it a try after this and wiping data, installed system.img again, again wiped, rebooted and as usual loading and loading and nothing, seem can't further continue without copy of stock ramdisk to flash, tried downloading the big update from mega to extract it but it always fail for me to download, same with trying to copy my TWRP backup because for sure ain't gonna doi fastboot -w and setting up everything from scratch in case even this doesn't help, if I knew it works for sure and it will load new system which I will have to set up then no problem, but in this case...
edit 2: tried to replace magisk ramdisk with ramdisk from Honor View 10 BKL09 (same as our working TWRP) but it seem I end up after flashing it, wiping and flashing system.img in TWRP/erecovery bootloop, it's not showing android booting logo like before (but hey at least no need to wait 10 minutes to find it's fail) and either go to huawei ercovery, if I perform factory reset there then it boots to TWRP, but can't boot anywhere else besides these two
Click to expand...
Click to collapse
If you want, i have all the files of the C432 update but idk in wich .zip, folder the ramdisk is stored.
I can send on several clouds.

PeterMarkoff said:
told you in OP disable all passwords before flashing
Click to expand...
Click to collapse
Hey did you restore your device are you still struck at boot screen?
If yes try this method.
https://forum.xda-developers.com/huawei-p20/development/rebrand-huawei-p20-eml-l29-eml-l09-t3779283

How to GO back to stock emui(India) after i flash a treble rom? Do i need to backup using some tool?

PLease someone tell me

srharshajava said:
PLease someone tell me
Click to expand...
Click to collapse
The problem is currently we don't have full
ROM to revert to stock and if we brick our device there is no proper way to revert to stock.
Our model even doesn't have SD card support.
Just wait for some time for someone to provide proper way.

When i flash a treble rom, I have a bootloop. I returned back with eRecovery directly on the phone.

miststudent2011 said:
The problem is currently we don't have full
ROM to revert to stock and if we brick our device there is no proper way to revert to stock.
Our model even doesn't have SD card support.
Just wait for some time for someone to provide proper way.
Click to expand...
Click to collapse
We do have a way to download full ROM.
http://pro-teammt.ru/firmware-database/?firmware_model=COL-L29C432
1. Search here for your exact model (change numbers after C432 to find ROM for your phone) and search for your rom version (B104 or B120)
2. Double click on "filelist" on the same row as FullOTA-MF
3. From filelist link menu download update.zip file (it should be really big, like 2+GB)
3. Extract UPDATE.APP file somewhere (eg. Desktop)
4. In settings of HuaweiUpdateExtractor (link: https://forum.xda-developers.com/showthread.php?t=2433454) uncheck "verify header checksum" and open UPDATE.APP
5. Extract any img (Be it ramdisk.img, ramdisk_recovery.img or system.img) file that you need from UPDATE.APP via HuaweiUpdateExtractor
You just got whoole stock rom and img files that you can flash. Tested by myself with flashing back original ramdisk, ramdisk_recovery and system.img and everything worked well.

Help with Treble ROMs

I have the PRA-LX1 with already unlocked bootloader and got it rooted with TWRP + Magisk before the last OTA.
I'm not a beginner with rooting this phone but only got Problems with installing any Treble Rom (tried Lineage and Aosp) and every try ended with a bootloop I don't know what I'm doing wrong.
So please can anyone give me a step by step instruction?
Which Treble Rom is a good one and recommended for this phone?
Which TWRP do I need?
And how exactly do I flash them correctly? What do I wipe?
Sorry for this noob questions but I failed so many times with Treble and don't want to do the reinstall with erecovery for the 10000 time :crying:
Thanks

Try to install the stock recovery and ramdisk.

+1
I also have this problem. Wich TWRP works with treble roms? i tryed everything and everytime i get a boot loop.
Please help.

After I flashed a treble gsi, I need to flash stock recovery?

Atiqx said:
After I flashed a treble gsi, I need to flash stock recovery?
Click to expand...
Click to collapse
Yes. if u still get bootloop flash stock recovery and ramdisk first then flash gsi. make sure u factory reset on stock recovery after u flash gsi.

ppdr07 said:
Try to install the stock recovery and ramdisk.
Click to expand...
Click to collapse
ppdr07 said:
Yes. if u still get bootloop flash stock recovery and ramdisk first then flash gsi. make sure u factory reset on stock recovery after u flash gsi.
Click to expand...
Click to collapse
And which TWRP should I use for flashing?.. And how can I flash GSI with stock?
That makes no sense to me sorry

Flash via fsstboot. Stock recovery and ramdisk flash via fastboot. Im not using twrp so idk.
---------- Post added at 08:38 AM ---------- Previous post was at 08:37 AM ----------
U can see a tutorial at xda how to flash gsi without twrp. Google it.

ppdr07 said:
Flash via fsstboot. Stock recovery and ramdisk flash via fastboot. Im not using twrp so idk.
---------- Post added at 08:38 AM ---------- Previous post was at 08:37 AM ----------
U can see a tutorial at xda how to flash gsi without twrp. Google it.
Click to expand...
Click to collapse
I googled it, pretty much every source says that you require a custom recovery in order to flash a GSI or any custom ROM.

XDA XILFY said:
I googled it, pretty much every source says that you require a custom recovery in order to flash a GSI or any custom ROM.
Click to expand...
Click to collapse
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ u will find Flash GSI without TWRP

ppdr07 said:
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ u will find Flash GSI without TWRP
Click to expand...
Click to collapse
Oh, well that's pretty cool. Either way, I just tried flashing Official Resurrection Remix GSI with no luck. Stock recovery, attempted to flash through fastboot and it just gives me a bootloop, exactly like TWRP does. Followed the guide you linked to etc, just keeps rebooting.

XDA XILFY said:
Oh, well that's pretty cool. Either way, I just tried flashing Official Resurrection Remix GSI with no luck. Stock recovery, attempted to flash through fastboot and it just gives me a bootloop, exactly like TWRP does. Followed the guide you linked to etc, just keeps rebooting.
Click to expand...
Click to collapse
Go to openkirin.net/download download the rr beta 3

Atiqx said:
I have the PRA-LX1 with already unlocked bootloader and got it rooted with TWRP + Magisk before the last OTA.
I'm not a beginner with rooting this phone but only got Problems with installing any Treble Rom (tried Lineage and Aosp) and every try ended with a bootloop I don't know what I'm doing wrong.
So please can anyone give me a step by step instruction?
Which Treble Rom is a good one and recommended for this phone?
Which TWRP do I need?
And how exactly do I flash them correctly? What do I wipe?
Sorry for this noob questions but I failed so many times with Treble and don't want to do the reinstall with erecovery for the 10000 time :crying:
Thanks
Click to expand...
Click to collapse
Well, I finally got it all working.
You know the risks, don't blame me if something goes wrong, I did these exact steps to manage to root my phone without breaking it. C432, Dual SIM and PRA-LX1.
Have everything stock before following this short guide: Firmware, all stock recovery etc.
Installing the ROM and GApps
First, download necessary GSI files.
(Personally I got Official Oreo Resurrection Remix, here).
(Although you could find yourself using virtually any other GSI, I like the look and feel of RR, though I'll be changing my boot animation with root). Many people would probably recommend you to use something like an AOSP, or LOS which I was also considering on installing. They may also come bundled with GApps, which would negate the later need for installation or download of separate GApps.
This may include GAPPS but you should understand this from the GSI page, so for example on RR I had to download both the latest base ROM .img and the micro GApps.
So to do this I had to use the right architecture (For the P8 Lite 2017, this is ARMx64, do your good research, since my problem was getting this wrong with my PRA-LX1 (Mine was A-ONLY), this stands for the base ROM and GApps.
After this I actually didn't use TWRP as user @ppdr07 advised. I followed the guide he linked us to and did as so, without following the -u command, since it wasn't working for me (didn't affect anything, try it, if it doesn't work, just take that bit out).
The ROM ended up installing and posting through, everything set up perfectly.
After this I was like "Huh, so what now? How am I to flash GApps on this without TWRP?". I went for it and booted into fastboot where I flashed Askuccio's TWRP for hi6250 devices. At this point I worried that the ROM wouldn't post again - though it did, so from there I enabled dev options and switched on advanced power options just for ease of usage. From there I rebooted straight to recovery which posted fine, too.
At this point, you need to flash the GApps. Go for the one that the original GSI page recommends. Flash it to the System Image partition. Don't wipe anything. At this point I recommend that if you realise that you forgot to transfer any files to the SD card, you should do it from the system. It works better compared to the MTP on TWRP. Either way, that should work properly. Now, reboot the system, and it should work perfectly.
Enjoy, it took me months to get to this point lol
Rooting Your New ROM With Magisk
(Before installing this consider the other root options. I believe there's SuperSU and another possibly that I'm less aware of. Either way, in my opinion Magisk comes with the most benefits so I'll be helping you out with that).
After this I ended up flashing Magisk in order to use Snapchat and other apps similar to it. Firstly you'll want to set up Google stuff which has been newly added to the system, and then you'll want to go to chrome and download the Magisk Manager .apk from here. The main and most reliable place to get it is from the creator's project page found here, all main links stand out in the middle fairly well.
(Remember to enable downloading of unknown apps for Chrome in it's app settings, otherwise it won't download or install.)
If it still doesn't work at this point, I ended up holding down on the Magisk Manager link and pressing Download Link (or something to that effect). From this point just install it as you would any other out-of-store app.
Now, you'll need to download these two files from the Magisk page onto your computer: Stable Installer and Uninstaller. Next, while booted into Android, copy them over to either Internal or External storage and when it's done, reboot into TWRP again, either by advanced power menu or using the button commands for recovery. Personally, I think I need the power options with this phone.
In TWRP, simply go to Install, navigate to /externalsd/***[WHEREVER YOU PLACED YOUR MAGISK FILES]***, then install the Magisk installer .zip. If unchanged, the filename should be something like "Magisk-v17.1.zip". Install it, then give rebooting a go. Hopefully it'll post, if not, go back into TWRP and run the Uninstaller .zip, it's saved me a bunch of times.
Unblocking Apps That Say Something Like "Your Phone is Rooted or Modified, no access blah blah blah..."
(Snapchat is the example used here. It won't work upon login if you don't follow this step. Some apps don't work with this alone however, though somebody may have produced a separate guide or easily installable Magisk module with a solution for it. One that won't be fixed singularly with Magisk Hide is Google Pay).
After posting, if you need to unblock Snapchat or something, go to Magisk Manager (which should now be more green), open the top left context menu, tap on Magisk Hide, and search "snap" until you see the Snapchat logo pop up, then select it, then back out with the back button. It should stay selected in Magisk, and the app should now be usable and shouldn't give you any annoying errors, if not give it a reboot and see if it's solved.
Good luck!

[James] Moto E5 Play won't boot into Custom ROM(s)

Device variant: XT19121-2 James
Chipset: MSM8920
After repeated failed flashes I am on stock firmware using this guide. Phone boots and works normally right now, but I can't seem to flash any Custom ROMs on to my phone. I was using this post to flash Lineage OS 15.1, which worked successfully at first, but the WiFi wasn't working so I reflashed it. It still didn't work so I did it again, wiping Dalvik/Cache too. After the second flash attempt, my phone began to only flicker on and off. I made sure to always clean flash, factory resetting, wiping Cache and Dalvik, even formatting data, but no matter what I do it doesn't work. Also attempted other GSI images (arm, A-only) like AOSP, ResurrectionRemix and phhusson's Lineage OS 15.1 But they all failed too. I am using TWRP for James v 3.3.1 although I did also try other TWRP images like v 3.2.1 . But it makes no difference. Also used Magisk v19 like some guides suggested but whether I have Magisk or not, it doesn't work. Even made sure to push the fstab.qcom file to /vendor. Anytime a Custom ROM is flashed whether zip or GSI img it goes past the initial "bad key" or "N/A" screen and starts flickering on and off. Bootloader and TWRP works fine, but that's about it. Everytime a flash fails I go back to stock firmware (which always works) and try another ROM. I wonder why the first attempt worked but doesn't anymore even if I mirror the exact steps I took from stock. If anyone has any solutions I would be really grateful. Let me know if you need any more information.

have you taken any recent OTA updates?

mikeshutte said:
have you taken any recent OTA updates?
Click to expand...
Click to collapse
Nope. Still on the 8.0.0 version the stock firmware comes in.

tkhan7916 said:
Nope. Still on the 8.0.0 version the stock firmware comes in.
Click to expand...
Click to collapse
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
tkhan7916 said:
Nope. Still on the 8.0.0 version the stock firmware comes in.
Click to expand...
Click to collapse
mikeshutte said:
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
Click to expand...
Click to collapse
I also just noticed you are using the latest version of TWRP 3.3.1. I'm not sure if you originally rooted and installed TWRP with the original patched version by Cody or not, but if so make sure with the new version that you format your data partition to f2fs. As this will ensure correct mounting of the data partition.

mikeshutte said:
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
Click to expand...
Click to collapse
Followed these steps exactly, including formatting the data partition to f2fs, and the same problem still persists. Screen just keeps turning on and off in a loop without booting into the ROM. I downloaded the Lineage OS 16.0 GSI A-only Arm version for reference.

I am having the same issue
Using XT1921-1
Latest TWRP
Have tried LOS 15, LOS 16, AOSP 8.1, AOSP 9.0
Have tried flashing in fastboot and TWRP
Have tried every combo of wipe/factory reset/format data and magisk flash possible
have tried stock recovery, have tried no verity, have tried stock boot.img
nothing works. only able to produce powered on (black and blank) screen that turns on and off for a minute before returning to bootloader
PLEASE HELP
think i might need a 8.0 GSI but cant find one anywhere

I eventually got RR to boot on the james xt-1921-3 I installed XT1921-3_JAMES_T_MPCS_8.0.0_OCPS27.91-150-5-1-3_cid21 as a base, then used boot and vendor partitions from JAMES_T_OCP27.91-51-4_cid21_subsidy-TMO_RSU_regulatory-DEFAULT_CFC and it finally worked.

tkhan7916 said:
Followed these steps exactly, including formatting the data partition to f2fs, and the same problem still persists. Screen just keeps turning on and off in a loop without booting into the ROM. I downloaded the Lineage OS 16.0 GSI A-only Arm version for reference.
Click to expand...
Click to collapse
Message me, I'll host a TWRP backup for the XT-1921-3 that boots RR 6.1

Download the file from this post https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 , then using fastboot, flash the vendor and boot img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
then boot into recovery and flash the file from that post to disable dm-verity and force encrytion, after that flash magisk, then reboot to bootloader, at command prompt-
fastboot erase userdata
fastboot erase cache
fastboot reboot
that should get you booted - profit

mrbox23 said:
Message me, I'll host a TWRP backup for the XT-1921-3 that boots RR 6.1
Click to expand...
Click to collapse
Do you still have that back up by any chance and could ypu send it to me?

Complete setup of Lineage OS

Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Unlock and flash recovery
Backup
Format Data! (It's important if you come from Miui)
Install Q Firmware + vendor
Install LineageOS followed by gapps
Reboot into system and setup device.
Reboot into recovery and flash magisk
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
I also dont know if its possible to get recovery and rom on android 10 versions.
Thanks

Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk

BJack0 said:
Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Flash a custom recovery
Create a backup
Root???
Install LineageOS
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
Thanks
Click to expand...
Click to collapse
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
You could also check LOS thread: Here and here
Remember:
Chinese firmware: Widevine L3 and NFC support
Indian firmware: Widevine L1 but no NFC support

ishaqtkr said:
Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
They may work as it but I was just wondering if anyone could go into more detail or if there was a better approach and from what Kollachi said there clearly is a better way that what I said.

Since I'm in stock ROM and haven't ever flashed AOSP ROM in this phone I'll just back off lol
Sent from my Redmi K20 Pro using Tapatalk

Kollachi said:
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
Click to expand...
Click to collapse
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it

Any of the two recoveries will work. Q firmware means Android Q. Wile data/cache dalvik that's it. Regarding firmware, there's a clear topic of Lineage OS in K20 Pro forum which is still in unofficially state
Sent from my Redmi K20 Pro using Tapatalk

BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
1. You can take what you want. Orangefox is based on TWRP.
2. Format data is needed if you come from miui. If you did it you are good to go. But it wouldn't be false to wipe system, dalvic, cache
3.https://downloads.akhilnarang.me/MIUI/raphael/ --> Take 10.4.6.0 or 10.4.8.0 (Android 10 = Q)
4. No there is no specific version.

BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
I would recommend the latest TWRP from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
https://forum.xda-developers.com/k20-pro/development/rom-lineageos-17-0-t3976469/post80406191

Robbo.5000 said:
I would recommend the latest TWRP from here
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
Click to expand...
Click to collapse
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE

BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.

Kollachi said:
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.
Click to expand...
Click to collapse
Yes flashing the whole fastboot ROM does add the risk, if you forget to change the flash option, but you are guaranteed a clean slate and so less likely to have any niggling issues that nobody else has. I would bet large sums of money that many of the issues you see on here, where only one person has some problem and everyone else is fine, would be solved by fastboot flashing MIUI before installing the ROM of choice.
If you know what you're doing and know when you'll be OK with what you've got and know when it's best to start clean, then going with the vendor and firmware is easier.
But if your unsure and new to flashing on Android phones, I will always suggest go with the overkill and know you've got the clean slate to start with.
---------- Post added at 10:56 AM ---------- Previous post was at 10:36 AM ----------
BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.

It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.
Click to expand...
Click to collapse
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.

BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
You connect your phone to computer while in recovery to transfer the OS zip
Sent from my Redmi K20 Pro using Tapatalk

BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
After format data, reboot your device into recovery again and transfer LOS, gapps and all files you need.
Format data kills the storage.

I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.

Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes I did that and it worked, unmounting and remounting helps detect the storage in PC
Sent from my Redmi K20 Pro using Tapatalk

Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes that works. Tried it myself but prefer to reboot into recovery again.:laugh:

Finally Successful
After a long post I have finally finished the process successfully. This was pretty educational for me since I didn't understand any of this at the start I would like to thank everyone who reply's and all the information that you have provided.

need help guys, i stuck in bootloop.
- fastboot rom global china V10.3.17.0 PFKCNXM
- fastboot twrp 3.3.1
- format data
- flash vendor image cn 10.4.6.0
- wipe cache/dalvik
- flash lineage os
- flash gapps nano
- reboot
- stuck bootloop

GUIDE How to Instal GSI ROM- Havoc-OS-v4.X-Official Android 11 On Redmi 8

Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com

Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery

D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry

Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !

Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer

UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...

letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?

letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems

Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...

letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)

Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...

Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .

Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.

letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse

Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .

Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?

mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11

letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.