Related
Hi, so I have a Motorola Razr I running the Brazilian Retail JB rom with unlocked bootloader and root.
My friend who has the same phone as me suggested me to install "AIO mod v6" from Arman. He gave me all the files needed and I went to work with it. However, he didn't tell me i need to have a EU JB rom and all the system apps ( I had done the very stupid thing of deleting system apps instead of freezing them). After i installed now the phone is stuck in the boot logo and when i try to flash a new rom with CWM it just gives out a error Status 7 since I don't have all the system apps I think.
Do i have any way out of this mess?!
Please help!
Thanks.
Flash your Firmware back (latam).
http://forum.xda-developers.com/showthread.php?p=40417328
Use RSD Lite 6.1.4 with this How To
http://forum.xda-developers.com/showthread.php?p=33712189
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
Flash your Firmware back (latam).
http://forum.xda-developers.com/showthread.php?p=40417328
Use RSD Lite 6.1.4 with this How To
http://forum.xda-developers.com/showthread.php?p=33712189
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
I just tried doing that but i get this error on RSD Lite "Failed flashing process. Unknown fastboot command...". Also on RSD for some reason no information of my phone is showing up on Device Properties.
Could you please help me out?
You connected in AP Fastboot Mode?
The Fastboot File is extracted without an error and your Drivers are actual?
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
You connected in AP Fastboot Mode?
The Fastboot File is extracted without an error and your Drivers are actual?
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Finally figured out the Problem. The XML file of the brazilian retail rom had a line of code with GET VAR and it was messing up everything.
So after i edited the xml file i managed to follow your instructions and it worked perfectly.
I couldn't do it without your help! Thank you so much!
I've got a stock Rom with stock recovery, only rooted. Is there a way to get ota updates(at least the security patches) the "normal way"?
Gesendet von meinem Nexus 6 mit Tapatalk
It may work if you can uninstall all traces of root.
Otherwise, no...much easier to download factory image, unzip and flash system.img manually via fastboot anyways.
pic.twitter.com/Bvl5KBOgBu
So i rooted my p7 and tried To install custom recovery using flashify and then i got it on bootloop
don't use flashify for installing a custom recovery on p7..use adb tools instead..be sure to take the right custom recovery for your p7 (corresponding to the version of android)..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
don't use flashify for installing a custom recovery on p7..use adb tools instead..be sure to take the right custom recovery for your p7 (corresponding to the version of android)..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
Well i all ready used it so how can i get my Phone working again
try to boot into fastboot mode (power and vol - or vol+) - the huawei ascend logo will apear and stay..
then connect to pc and use adb tools and commands to flash the right custom recovery (twrp e.g.)..
search for this procedure here..it is nearly in every thread to be found..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
try to boot into fastboot mode (power and vol - or vol+) - the huawei ascend logo will apear and stay..
then connect to pc and use adb tools and commands to flash the right custom recovery (twrp e.g.)..
search for this procedure here..it is nearly in every thread to be found..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
I cant get it on fastboot mode
what about rescue mode? power & vol+ pushing together until a screen with yellow writing appears (don't know exactly what is written there), or if its last firmware version was android 5.x then it might appear a white screen with saying rescue mode..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
what about rescue mode? power & vol+ pushing together until a screen with yellow writing appears (don't know exactly what is written there), or if its last firmware version was android 5.x then it might appear a white screen with saying rescue mode..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
Is that rescue mode-
pic.twitter.com/Bvl5KBOgBu
the pic shows something installing..that is the force update mode..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
the pic shows something installing..that is the force update mode..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
I know but its stays on 0%. Is there way out
did you put a update.app or update.zip into dload folder on your external storage or internal storage?
maybe this causes the bootloop..
look inside the other threads for a solution..
i don't have the phone anymore so i don' t have a solution..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
did you put a update.app or update.zip into dload folder on your external storage or internal storage?
maybe this causes the bootloop..
look inside the other threads for a solution..
i don't have the phone anymore so i don' t have a solution..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
I got it on fastboot&rescue mode what To do now
connect with pc..let drivers install when needed..then start your command line on windows from adb folder (right click - open command line from here as admin)..
then type:
fastboot devices - this should give you the serial number of your phone
next: fastboot flash recovery recovery.img - replace the recovery.img with the exact name of the recovery you want to have (example: twrp.img - this file should be copied into the adb folder before you start flashing)
after that:
fastboot reboot - reboots your device
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
connect with pc..let drivers install when needed..then start your command line on windows from adb folder (right click - open command line from here as admin)..
then type:
fastboot devices - this should give you the serial number of your phone
next: fastboot flash recovery recovery.img - replace the recovery.img with the exact name of the recovery you want to have (example: twrp.img - this file should be copied into the adb folder before you start flashing)
after that:
fastboot reboot - reboots your device
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
Dload Links?
for what?
firmware? update extractor? adb tools?
please ask google and this forum..you can find all neccessary files and instructions there..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
for what?
firmware? update extractor? adb tools?
please ask google and this forum..you can find all neccessary files and instructions there..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
Well im not really good at these type of thing so can you please look for them??
are you serious?
it is not really difficult: open a browser and type in the firmware name..
same for adb tools and huawei update extractor..
i bet you will mainly find all neccessary files on xda
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
are you serious?
it is not really difficult: open a browser and type in the firmware name..
same for adb tools and huawei update extractor..
i bet you will mainly find all neccessary files on xda
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
What is the right firmware for p7
http://forum.xda-developers.com/showthread.php?t=3303591 this is the actual firmware for the huawei ascend p7-L10..
Gesendet von meinem Mate S CRR-L09 B303
What do i do with huawei update extraxtor
blueIBI said:
http://forum.xda-developers.com/showthread.php?t=3303591 this is the actual firmware for the huawei ascend p7-L10..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
I have all the things now what do i do now
Hi there,
here some instructions and files for updating your Phone from Nougat to Oreo.
And how you can try a treble build and how do you come back to Stock Rom.
We start with updating Nougat to Oreo (B321_L29_C636) :
Delete fingerprint and lockscreen pin before you update!
Backup Apps etc with Huawei Backup
Extract the folder of this zip on your external sd card:
https://www.androidfilehost.com/?fid=817906626617955728
and flash oreo_update.zip with twrp.
Then its boot into nocheck recovery and install oreo.
After reboot your bootloader is still open and all apps are still there.
But you need to login to all your running accounts again. Game datas are lost too.
Some things like Themes are not working right now and you have the wrong build number.
We fix that now :
Reboot into fastboot and flash oreo twrp. (fastboot flash recovery_ramdisk twrp_oreo.img)
https://androidfilehost.com/?fid=673791459329072916
boot into twrp, flash supersu for oreo and reboot.
https://www.androidfilehost.com/?fid=745849072291698567
Thanks to "LastStandingDroid" for modified supersu.
Install a root explorer and browse to the following path:
/cust/hw/ rename "spcseas" folder to "eu"
/version/special_cust/VKY-L29/hw/ rename "spcseas" folder to "eu"
/data/hw_init/version/special_cust/hw/ rename "spcseas" folder to "eu"
then reboot.
For VKY-L29C185:
/cust/hw/ rename "spcseas" folder to "meafnaf"
/version/special_cust/VKY-L29/hw/ rename "spcseas" folder to "meafnaf"
/data/hw_init/version/special_cust/hw/ rename "spcseas" folder to "meafnaf"
If something not working well please make a factory reset with original recovery.
https://www.androidfilehost.com/?fid=673791459329071154
flash with fastboot:
fastboot flash recovery_ramdisk Original_Recovery_B321.img
Later i will add the treble part!
Here you can take a look:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
I'm not responsible for any bricks.
Thats how I did it and its working fine.
We solve it with rename instead of flashing data file because it will come request for other firmwares.
I add a Rollback later.
Gesendet von meinem VKY-L29 mit Tapatalk
Everything work for me. If you want make a factory reset after install flash original recovery before. I upload it later.
Gesendet von meinem VKY-L29 mit Tapatalk
Is it suitable for VKY-L29C185 model?
Added rename instructions for VKY-L29C185
Rommco05 said:
Ok if I have acces to internal storage I will tommorow morning install Oreo. Is some chance you upload stock recovery to tommorow morning? Ou, anyway I can extract it from main zip (update.zip)? One more Q, if I flash stock recovery I don't need supersu and basically I can relock bootloader with stock recovery right?
Click to expand...
Click to collapse
Here is the original recovery but i would not relock the bootloader. Its possible that you brick your phone.
https://www.androidfilehost.com/?fid=673791459329071154
Rommco05 said:
Ok, change my mind I stay with custom recovery but before I make factory reset with stock recovery. Thanks for sharing. I like clean start. Before reset I will rename folders
---------- Post added at 22:59 ---------- Previous post was at 22:57 ----------
Need I flash stock recovery2 before reset?
Click to expand...
Click to collapse
Added flash instructions for original recovery. Only normal recovery needed.
Gesendet von meinem VKY-L29 mit Tapatalk
Hi blackball first of all thank you so much for keeping our p10p alive and updated....
My model is vkyl29c185 running fromfuture 201 without rebranding
Can i flash the oreo as per the OP directly without rebranding or any hassles.. Pls
Yes. Just rename folders like C185 instructions
Gesendet von meinem VKY-L29 mit Tapatalk
When you will put instructions for Rollback to Nougat L29C432 or to B201 L29C432 ( your room )? ThankZ
If you give the support there.. It's not my language [emoji1]
Gesendet von meinem VKY-L29 mit Tapatalk
Hi Blackball. First of all, thank you for beeing here helping us.
I have a little trouble. Of course my p10 plus is making weird stuff. I've downloaded the oreo zip file into my phone, and sent to my SD root (with es explorer pro). Booted on twrp, and launched the zip, but I get an error, zip signature failed, followed by invalid zip file format.
I am on fromfuture b201 . Shouldn't it work with this ROM?
dj_varizes said:
Hi Blackball. First of all, thank you for beeing here helping us.
I have a little trouble. Of course my p10 plus is making weird stuff. I've downloaded the oreo zip file into my phone, and sent to my SD root (with es explorer pro). Booted on twrp, and launched the zip, but I get an error, zip signature failed, followed by invalid zip file format.
I am on fromfuture b201 . Shouldn't it work with this ROM?
Click to expand...
Click to collapse
You must unzip (extract) the OREO_UPDATE ZIP TO ROOT OF SD CARD AND FIRST flash from b201 twrp the oreo_update (it is zpped in OREO_UPDATE. zip) did you read the first post with instructions?
Poslano sa mog VKY-L29 koristeći Tapatalk
Alora6501 said:
You must unzip (extract) the OREO_UPDATE ZIP TO ROOT OF SD CARD AND FIRST flash from b201 twrp the oreo_update (it is zpped in OREO_UPDATE. zip) did you read the first post with instructions?
Poslano sa mog VKY-L29 koristeći Tapatalk
Click to expand...
Click to collapse
I did, but didn't understand I had to unzip before. I will try it now. Thanks for the help mate! (getting old leads to get stupid....)
Rommco05 said:
How I can make rollback to Nougat if is possible, thx
Click to expand...
Click to collapse
Look at this thread
https://forum.xda-developers.com/showthread.php?t=3724382
Gesendet von meinem VKY-L29 mit Tapatalk
Slightly off-topic question:
I'm considering getting this phone,but,I was curious if the EMUI PC-Desktop mode (found on the Mate 10/Mate 10 Pro) is included in the Oreo update for the P10/P10 Plus ?
At the moment it's not included
Gesendet von meinem VKY-L29 mit Tapatalk
Blackball said:
At the moment it's not included
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
Thank you for the prompt response, it's greatly appreciated.
Still interested, considering this vs the Mate 10 Pro.
TBH, I'd seldom find a real world use scenario for the Desktop Mode.
For myself, the expandable storage & front FPR/nav button trump the Desktop Mode, if forced to choose between the two,not to mention the price difference
Will likely order a P10 Plus by the end of the week/upon sale of my Sony XZP.
Once again @Blackball , thank you for the prompt response. :good:
Sent from my Sony Xperia XZ Premium using XDA Labs
I have a VKY-L29C432 with fromf b201 and when I give flash to oreo_update.zip in twrp the phone restarts.
Trimis de pe al meu VKY-L29 folosind Tapatalk
Then you did something wrong. Make a Screenshot of your folder that you have extracted
Gesendet von meinem VKY-L29 mit Tapatalk
Hey guys i have question today i flash twrp via odin and after flashing i boot in twrp and make wipe data..Than i reboot to system and set phone configuration...but than i try again boot to twrp and wtf...only stock recovery is there no twrp but knox is tripped 0x1 everytime i reboot to recovery is only stock recovery i have sm n950f exynos i find tutorial here on xda
Any fix, solution or suggestion please
Poslano z mojega SM-N950F z uporabo Tapatalk
What was your stock firmware before you tried to root your device (nougat, Oreo)? Which TWRP version you used? Have you flashed the no-varity-opt-encrypt zip file after flashing TWRP? Which Odin version you have used?
Have you rebooted into TWRP after format data partition?
You see, questions over questions. To help you useful we need much more informations.
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
What was your stock firmware before you tried to root your device (nougat, Oreo)? Which TWRP version you used? Have you flashed the no-varity-opt-encrypt zip file after flashing TWRP? Which Odin version you have used?
Have you rebooted into TWRP after format data partition?
You see, questions over questions. To help you useful we need much more informations.
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
I work with this tutorial https://forum.xda-developers.com/galaxy-note-8/how-to/guide-how-to-root-note8-efs-backup-t3677038
i root it now but dont know does twrp stay or is gone
i have Oreo N950FXXURCRB9 this is April security patch
Yes i format data partition after that i reboot and set my phone like first time after that i want reboot again to twrp but there no twrp is only stock recovery today i try again but now i after format data partition go back and flash supersu after that i reboot to system and set my phone now i have supersu but nonstop i got security warning something like Security Agent found app which is maybe malware or something like that i think security agent found supersu is possible disable it this warning
The "How to" method from Dr. Ketan isn't the best. It's based on flashing his Rom after flash TWRP and root.
Best "how to" is this from geiti94
https://forum.xda-developers.com/showthread.php?p=73817280
You only need newest TWRP version from zeroblade if you on Oreo firmware and Odin v3.13.1.
For your security warning issue you only need to delete the securityLogAgent.apk in system/app/
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
The "How to" method from Dr. Ketan isn't the best. It's based on flashing his Rom after flash TWRP and root.
Best "how to" is this from geiti94
https://forum.xda-developers.com/showthread.php?p=73817280
You only need newest TWRP version from zeroblade if you on Oreo firmware and Odin v3.13.1.
For your security warning issue you only need to delete the securityLogAgent.apk in system/app/
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
Does i must use dm-verity and force encryption disabler???? Like i say i have now root access and work fine but only dont know does i have twrp im scare to boot in what can i do in case if i again not have twrp and only stock recovery
If you don't have TWRP you need to flash it again. Including format data partition again. And yes, you need the no varity opt encrypt app file!
You could boot into TWRP and check if you can mount data. If you can't, your data partition is still encrypted.
If you want to flash a custom Rom or a flashable zip, you need a custom recovery like TWRP. So i would make this work at first.
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
If you don't have TWRP you need to flash it again. Including format data partition again. And yes, you need the no varity opt encrypt app file!
You could boot into TWRP and check if you can mount data. If you can't, your data partition is still encrypted.
If you want to flash a custom Rom or a flashable zip, you need a custom recovery like TWRP. So i would make this work at first.
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
I download an app from play store named reboot to recovery and when i run it phone shutdown and boot in twrp so thats means i have twrp i see its 3.2.1.0 version but how check does can i mount data partition?
btw i go to twrp than mount and i try mount DATA but twrp wont check it so i think i have encyrpted..so how fix that without lose everything or wipe anything
No. If i know right, you get an error message if mounting data isn't possible
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
No. If i know right, you get an error message if mounting data isn't possible
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
what if i flash dm verify
blinkt88 said:
what if i flash dm verify
Click to expand...
Click to collapse
Normally, on every device boot, the system is checking if data partition is encrypted. If it isn't, it will encrypt it again.
With that zip file, the encryption on boot-check will be disabled.
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
Normally, on every device boot, the system is checking if data partition is encrypted. If it isn't, it will encrypt it again.
With that zip file, the encryption on boot-check will be disabled.
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
So what can i do now to can mount data if i need it..i want flash Zero Camera Mod but i think without mounted data i cant or im wrong means?Any idea?maybe in future i flash custom rom so how fix my problem
Poslano z mojega SM-N950F z uporabo Tapatalk
Try flash what you want. Maybe your data partition is unencrypted and it works.
If not, you need to do the procedure with format data partition again.
Gesendet von meinem SM-N950F mit Tapatalk