Hi there
i change my stock rom Froyo to Gingerbread.jpkt2(android 2.3.6) yesterday after that my menu(hard button at the left of the device)button of galaxy mini s5570 when pressed it work like home button
and gone me to home not opend menu or properties detail of app for example contact or message ...
So i dont have any menu button in my device )
Maybe try again flashing?
If not maybe a hardware failure .
I flashed(with other CSC rom ) too
again it work like middle home button !
Related
Hi guys,
i flashed my sgs with super optimised kernel 3.7 from 3.6 .... = bad news ... i realised that my home button does not work anymore so i have to use the back button instead of home button it took me many hours to figure and fix my sgs but still no home button working but at least my sgs did not turn into a paperweight.
below are the series of events that happened (i tried to put it in order as much as possible)
- home button stopped working
- alot of FC'ing
- sgs kinda like jammed or stuck
- did a full reflash from step 1 [HOWTO] Froyo FW I9000XXJPM: Upgrade via Odin, Root, Recovery 2e, Lagfix! several times !
- flashed a couple of times but when phone enters recovery mode after 1st flash i cant select wipe data/cache cos home button not working so phone was turned off and entered download mode then flashed JPM.
- also tried to flash in 3.6 version kernel couple of times to overwrite 3.7
- here are some stuff i saw along the way :
--there were occasions i see a mobile logo with arrow pointing to pc (just like the background pic of recovery menu but no menu till i unplug usb)
--after reflash when it enters recovery mode automatically it will then not show menu and android logo with a caution sign was seen but when usb cable is unplugged recovery menu comes back but still no luck to wipe data/cache cos home button not working
--instead of seeing recovery 2e , 3e was shown but then again i cant select wipe data/cache due to home button not working
i'm sure many reading this is figuring how i managed to enter recovery or download mode without the home button ???
-- just hold vol up/down + power button home button is not needed in my case !
while in recovery menu, i cant select or do anything with home button except moving vol up/down button to highlight selection but cannot "enter" with home button so i turned the phone off and continued flashing JPM and it works.
but while inside the 3.6 or 3.7 kernel, i can move up or down using vol switch and how did i manage to "enter" selection without home button ? i discovered that the power button does the "enter" !
home button was working intermittently but it comes with double click where you bring the last 6 used apps and task manger selection .. but now it does not come up anymore. still can feel the click on the home button but no response as for now.
also flashed several times as mentioned with re-partition ticked to try to wipe everything but still same results.
so now i have ended up with :
PDA : I9000XXJPM
Phone : I9000XXJPM
CSC : I9000 OXAJPM
Build info : 2010.10
Baseband : I9000XXJPM
Kernel Version : 2.6.32.9
[email protected] #19
Build Number : FROYO.XXJPM
i have also tried many ways such as formatting sd, system, basically almost every menu in the kernel ! basically i wiped out previous data (my guess) but all the apps + data are gone. it was a PITA process.
now it is just the freaking home button does not work anymore ! but nevertheless quadrant still shows 2216 ! and the phone is still blazing fast .
hope someone could help out i have tried to do the search function but not much luck related to my issue.
i have the same problem .... my home button is dead as well -.-'
Flash back to an Eclair firmware. See if that changes anything.
snapper.fishes said:
Flash back to an Eclair firmware. See if that changes anything.
Click to expand...
Click to collapse
just tried. home button still dead ...
luckly my phone is still in warranty ..
hello there! i have one galaxy tab P1000...my tab is unlocked and rooted and also has super user access and clockwork recover mod installed on it..
i was trying to flash my tab with an cynogen mod rom for galaxy tab ..and after that try my tab is stuck in to a screen which says on top "overcome cWm Recovery v3.0.2.4
and its not letting me do anything ..its just keeps comig back to same screen again and again ..i also tried flashing it again through SD card update but that didn't work to...im uploading a video ..please go through it and you will have better idea of what im talking..thanks for your help..
http://www.youtube.com/watch?v=9h0nlYgCAZg
ok, instead of using the hardware buttons to select an option, itshould let you use the capacitative buttons on the bezel.
If you use the volume button to highlight your selection, then i think its either the menu or home capacitative button(the ones on the screen bezel), which will make the selection for you.
Hope it helps.
stoney73 said:
ok, instead of using the hardware buttons to select an option, itshould let you use the capacitative buttons on the bezel.
If you use the volume button to highlight your selection, then i think its either the menu or home capacitative button(the ones on the screen bezel), which will make the selection for you.
Hope it helps.
Click to expand...
Click to collapse
thanks for reading and replying...i already tried what u r suggesting but didn't work..
i just used a new pit file and now it gets stuck on galaxy tab written on screen...
but good things is i still go in to downloading mode by pressing volume down and power keys..help
If you still go to download mode. Then go back to stock using roto jmi rom. Refer to the overcome thread to find out how to flash and get necessary pit file.
Hi,
Is this posible that something is broken in firmware that [home key, back , menu] don't work ? When i use power + home shortcut, they work, when I use [minus + home + power ] telephone goes to download mode, but when system starts keys are dead. sometimes they work sometimes are broken. In repair mode , home + power - no keys , no posibility to test keys.
sorry for bad english
if keys sometimes works and sometimes not then keys are damaged
if navigation keys are not working at all then there can be a fault in the rom or firmware you are using
Do you have Clockworkmod recovery? CWM has key testing feature, use it to test your phone's key. If test result is 100% ( mean it detected all your pressing), it's firmware's bug
Good luck my friend
another solution
anhhnt said:
Do you have Clockworkmod recovery? CWM has key testing feature, use it to test your phone's key. If test result is 100% ( mean it detected all your pressing), it's firmware's bug
Good luck my friend
Click to expand...
Click to collapse
just flash another firmware...mybe it could help u
I have this problem too.
My home key working to enter CWM, soft buttons in taskbar work, but can't do multitasking.
Problem with Power Button and Menu AutoScrean off
I have a Galaxy Note N7000. On it is a version N7000XXLSC_N7000OXALSC_N7000XXLSC What I normally put on the pre root the phone with the help mobileodin. Everything works great and of course AutoScrean me off and power button.
When you put the version
N7000XXLSZ_N7000OXALSZ_DBT
and
N7000XXLSZ_N7000OXELS7_SER
No AutoScrean off and power Menu Button.
do
First Factory reset - did not fix the problem
Second - With the "terminal emulator" enter the following code
are
ON echo-n> / EFS / IMEI / keystr
sync
reboot
The phone restarts but when I have picked up again AutoScrean and Power Off menu button
Please help thanks
... Is that the only problem i have with my n7000 with autoscrean off and the power menu button version 4.1.2 jb n7000xxlsz_n7000oxalsz_dbt
It might be because you flashed them through mobile odin... try flashing them with Odin on your computer.
... I tried a PC via Odin the same result ...
Hi all.
First I'm sorry for my english. He's from google translate.
I have a problem with my mini s5570 .
I put this Rom http://forum.xda-developers.com/showthread.php?t=1255305, but not help.
I have a problem with the power button .
When I unlock the phone and pressed the button - the screen does not light up ?
I can run it with Home button .
When I want to lock the phone, not of Power button and had to wait to lock myself.
When I want you to turn it off and hold power button did not show shut down menu .
Sometimes the handle for a few minutes , but then again does not work: (
And when I put the battery in the phone, it is placed alone without me I let him go . Very strange ?
Please help me : (
I'm assuming your power button died?
Sent from my CM7 GT-S5570I
grn93 said:
Hi all.
First I'm sorry for my english. He's from google translate.
I have a problem with my mini s5570 .
I put this Rom http://forum.xda-developers.com/showthread.php?t=1255305, but not help.
I have a problem with the power button .
When I unlock the phone and pressed the button - the screen does not light up ?
I can run it with Home button .
When I want to lock the phone, not of Power button and had to wait to lock myself.
When I want you to turn it off and hold power button did not show shut down menu .
Sometimes the handle for a few minutes , but then again does not work: (
And when I put the battery in the phone, it is placed alone without me I let him go . Very strange ?
Please help me : (
Click to expand...
Click to collapse
are you rooted your phone n use custom rom ? ?
if it's yes, try to flash another again or back to stock Rom
Don't Forget to Hit THANKS button
I rooted my phone after this problem.
the problem came out of nothing
sounds like a dead power button to me