stuck in cm recovery - Mi 3 Q&A, Help & Troubleshooting

I am using mi 3 and was using cm 12.1 nightly but few days ago I got cm 13.0 update. notification so I downloaded cm 13.0 update but when update was taking place it stuck at cyanogen log so after some time i booted my phone and it entered in cm recovery and try to update from an external storage(pen drive through otg cable) but cm recovery is not showing any external drive.so I am stuck in cm recovery and not able to go anywhere, please help me
THANKS

U can use adb or fastboot tools to flash recovery or roms.

Devenderchouhan said:
I am using mi 3 and was using cm 12.1 nightly but few days ago I got cm 13.0 update. notification so I downloaded cm 13.0 update but when update was taking place it stuck at cyanogen log so after some time i booted my phone and it entered in cm recovery and try to update from an external storage(pen drive through otg cable) but cm recovery is not showing any external drive.so I am stuck in cm recovery and not able to go anywhere, please help me
THANKS
Click to expand...
Click to collapse
Download TWRP recovery img from here.
Go to fastboot mode, by pressing power+volume down.
Install TWRP recovery in fastboot mode and install the ROM via OTG drive.

Devenderchouhan said:
I am using mi 3 and was using cm 12.1 nightly but few days ago I got cm 13.0 update. notification so I downloaded cm 13.0 update but when update was taking place it stuck at cyanogen log so after some time i booted my phone and it entered in cm recovery and try to update from an external storage(pen drive through otg cable) but cm recovery is not showing any external drive.so I am stuck in cm recovery and not able to go anywhere, please help me
THANKS
Click to expand...
Click to collapse
Deleted

Hi
You can either use adb or in CWM go to Advance then Mount USB storage.
This will have all the data in there.
Always save the rom files in the internal memory as CWM does not access external memory (at least as far as I know)

Related

bricked xt10033

hello
I am using moto g xt10033. recently I flashed cm13 but by mistake I flashed with the unofficial version so I wasn't getting any network.
Then installed the official version and was about to flash but made a mistake in flashing the recovery frm twrp to cyanogenmod
Now in the cyanogenmod recovery I wiped the system partition and now I m not able to connect in adb mode or able to install the new rom
tried doing reset in cyanogenmod recovery bt still getting stuck in bootloop
Reflash the CM 13 zip from the recovery, it's just a softbrick.

TWRP not working

I flashed twrp using fastboot mode , but the twrp is not showing the internal storage of the phone and now the phone is facing problem in booting up , I tried flashing twrp 3.0.3 and 3.1.0 but none of them works and twrp is not able to format the phone too as it is not able to mount the internal storage , Guyz please suggest some solution
Can you flash it through adb? That's how I flashed mine this morning and it worked great
What ROM were you using before flashing TWRP 3.1.0? Try version 3.0.4-1, it had the greatest compatibility.
Anova's Origin said:
What ROM were you using before flashing TWRP 3.1.0? Try version 3.0.4-1, it had the greatest compatibility.
Click to expand...
Click to collapse
Thanks for ur help, I tried it with oxygen open beta 3, the problem got sorted by flashing it 3 more times by fastboot method, I guess it was some compatibility issue, TWRP 3.1.0 is now working fine but still the phone is facing prob like now it first takes me fastboot and from there I have to boot my phone.

[C6903] - cant run new NOUGAT custom roms - bootanimation 2-3 sec and phone turns off

At the beginning, please forgive me the quality of my English.
Me and other friends using c6903 have posted on the forum about trouble with running Nougat ROMs:
- [ROM][7.1.X][27/07/17][STOCK-CAMERA][3.4 KERNEL][TESTING] LineageOS 14.1 - UNOFFICIAL
- [ROM] [7.1.2] [OMS] [OFFICIAL] [Honami] Resurrection Remix Nougat v5.8.3 [01/08/2017]
- [ROM] [7.1.2] [Substratum/OMS] [UNOFFICIAL] [Honami] Android Ice Cold Project 12.1
For example LinageOS 14.1.
I flashed build from 11/07 without any problems.
Everythings worked fine, but when i try to flash newest build I encountered a big problem.
Bootanimation continues 2-3 sec. and phone turn off [check plz video].
Then only the launch button was active.
Everything I do exactly the same as in 11/07 build.
Why rom can't run?
The situation applies to all the above versions.
Resurrection Remix Nougat from 28/06 booted fine too.
Newer versions not...
One of friends - MIcHiJK - suggested that this could be a problem with changing the screen for "fake".
Me and him changed screens probably for counterfeiting.
Maybe someone else did it and have this problem?
....but why build from 11/07 (LinageOS), 26/08 (RR) and 20/06 (ACIP) booted without any problems?? In my case change screen was earlier.
What have I done so far to solve the problem.
- used TWRP 3.0.0 and 3.0.2
- Always full wiped (a few times format internal storage using twrp too)
- flashed roms when using Cyanogenmod 12.1
- flashed roms when using stock .236
- restored software using EMMa and Flashtool, then root (kingroot), flashed twrp by fastboot, full wipe, flash rom - without result
- used others kernels referenced by creators roms (flashed after installation rom).
Nothing worked.
I know I'm not alone. Many guys have problem like me.
Is anyone able to give a solution?
May God bless guy which will solve our problems!
"https://youtu.be/sOBquHNlbzQ"
Hello to all ppl which had this problem.
Since I replace my broken original xperia z1 Display, I wasn´t able to boot any of the new Nougat rom releases.
I solved this problem with a new Kernel.
Super Lamic Posted this Kernel to test the Battery Life but with this Kernel the problem was solved and I was able to run the new Releases on my fake Display.
Kernel Link: https://mega.nz/#!RN1nFYRT!546WMDdM2ToJEeZlleKTjS-TdR54rkYiOGKUDDWQ-t0
Install new LineageOS build on your xperia z1 with TWRP 3.1 (with 3.0 it wasnt able to install the boot.img).
Before you reboot select images, boot and flash the boot.img.
Then the new build should run without problems.
On other roms like Resurrection Remix it endet in invinite boot so I was just able to run normal Lineage.
I hope it helped someone. Im still interested what the devs changed that causes this problem. And I hope there will be improvments in future that this problem wont happen anymore.
same problem for me like OP. Would be interesting whats the reason for this behaviour that some nougat roms don't run on phones with replaced display. for me some still run, but then i have the problem that recovery is not available.
For those wo will flash AICP maybe this solution will work in RR too.
In normal Lineage it worked when i flashed cm12.1 Nouagt Kernel after flashing LOS 14.1.
But for RR or AICP it ended in infinite boot. Here is how I managed to get it work.
1. Download AICP (Latest Version [2017/08/01]) then download AICP (Version 2017/06/20).
2. Delete 'boot.img' from the Latest Version zip and put the 'boot.img' from the older relase into the Latest
3. Boot into TWRP 3.1 or 3.0, Wipe all and flash your Latest AICP zip with the older boot.img.
4. Boot phone. The z1 will show you just the Sony Logo. I waited some Minutes and powered off with power + volume up.
5. Connect phone in fastboot mode on PC and flashed cm12.1 Nougat Kernel.
6. Type 'Fastboot Reboot', the phone Turns on with the newer Boot screen where xperia stands on the bottom. You will finally see AICP Boot Animation and after some time rom boots.
---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------
Aaskereija said:
same problem for me like OP. Would be interesting whats the reason for this behaviour that some nougat roms don't run on phones with replaced display. for me some still run, but then i have the problem that recovery is not available.
Click to expand...
Click to collapse
Just Install Recovery via Fastboot. If you dont know how to do this you need to set up android sdk. You will find many tutorials in the internet.
MIcHiJK said:
Just Install Recovery via Fastboot. If you dont know how to do this you need to set up android sdk. You will find many tutorials in the internet.
Click to expand...
Click to collapse
really funny. sound good, doesn't work
Aaskereija said:
really funny. sound good, doesn't work
Click to expand...
Click to collapse
How did you installed the rom?
From which rom you came and which recovery did you used and how did you installed the recover?
different ways, but mostly with my standard custom-rom Tesla which is on Android 5.1.1. TWRP is on 3.1 which i install via cmd (fastboot flash recovery) cause build in recovery of tesla is broken.
Or i go over latest stock with dualrecovery, flash boot.img of the custom-rom (wich work) and then flash rom. but still recovery is gone after that.
@Aaskereija
I can tell you how I installed. I never lost my recovery. I came from xproject rom and I had nuts dual recovery. I flashed via fastboot advanced kernel, rebooted directly into inbuild TWRP 3.1, wiped all and flashed nougat rom. I had no recover so I flashed via fastboot official TWRP 3.0 and now I have a recovery. Since I installed TWRP one Time i never done it again. Everytime I flash a new rom it's still there. Maybe you try some different ways to install a nougat rom cuz it should work we all have the same device. Another question. Can you give me link to TWRP 3.1 for honami. I can't find TWRP 3.1 for z1 I used it just with advanced kernel. I just can find official TWRP on the internet witch is outdated
Guys, you don't have to create threads for this. I'll have an aftermarket display too, so I'll be forced to fix it anyway. And I have an idea what can be wrong...
MIcHiJK said:
@Aaskereija
I can tell you how I installed. I never lost my recovery. I came from xproject rom and I had nuts dual recovery. I flashed via fastboot advanced kernel, rebooted directly into inbuild TWRP 3.1, wiped all and flashed nougat rom. I had no recover so I flashed via fastboot official TWRP 3.0 and now I have a recovery. Since I installed TWRP one Time i never done it again. Everytime I flash a new rom it's still there. Maybe you try some different ways to install a nougat rom cuz it should work we all have the same device. Another question. Can you give me link to TWRP 3.1 for honami. I can't find TWRP 3.1 for z1 I used it just with advanced kernel. I just can find official TWRP on the internet witch is outdated
Click to expand...
Click to collapse
how do u installed it? fastboot flash recovery or else?
i was mistaken, its 3.0.2 not 3.1 if u still ned it, download
Aaskereija said:
how do u installed it? fastboot flash recovery or else?
i was mistaken, its 3.0.2 not 3.1 if u still ned it, download
Click to expand...
Click to collapse
Android Sdk put twrp.img in platform tools folder then open CMD in this foder, fastboot flash recovery TWRP.img.
I asked about twrp cuz in advanced kernel is TWRP 3.1 inbuild but I can't find just the twrp 3.1 IMG without kernel. Strange.

Redmi 4X: TWRP, LineageOS, Gapps (Cannot update ROM) (nightly) *error*

Hi everyone,
I'm new here though but am a Xiaomi user from the beggining of Xiaomi into devices with Redmi Note 3G Enhanced.
Currently, I own a Redmi 4X and I would like your expert lights please. I've flashed the latest twrp from twrp.me for my santoni device. Then flashed the latest build from LineageOS Official source + Gapps before booting up for first time. Everything was working perfectly until I decided to flash the latest update of LineageOS as I've seen in my updater it was released. So, I downloaded it through the updater and tried to flash it...
I came up with this "Failed to unmount /system (device or resource busy)" after that re-booted to LineageOS and everything was messed up with Google Services & Apps etc. Then I went back to twrp recovery and tried to flash again the rom but I was still getting that message so I understood something am doing wrong. Also santoni has dm-verity enabled which I know something about but just an info. I really wanna stick with LineageOS on my Redmi 4X forever but I'm afraid to flash it again. I've flashed MIUI 10 Beta by fastboot but now I wanna go back to LineageOS forever (addicted).
My only problem is: After successfuly flashing LineageOS and Gapps, I cannot apply (flash) updates to update the ROM to the latest nightly build due to this error above.
Kind regards,
peryson
Try with different recovery. For example with this
Harukey said:
Try with different recovery. For example with this
Click to expand...
Click to collapse
Instead of trying an unofficial recovery, do I have an option to unmount system manually before flashing through Official TWRP?
peryson said:
Instead of trying an unofficial recovery, do I have an option to unmount system manually before flashing through Official TWRP?
Click to expand...
Click to collapse
You can download latest Lineage OS build and dirty flash it (without any wipes) (so you can unmout system parition). And I don't see any issue in using unoffical twrp.
I also have experienced same error once during upgrade "failed to unmount /system"
Eventually I wiped everything and did clean flash from scratch. This is really annoying issue and demonstrates that upgrade system is not 100% reliable for some reason.
I'm not sure however is it Lineage or twrp issue.

HELP - all custom recovery seems not to work

Hi,
I have a problem in which when I flash the TWRP (any Android version), then when i'm in the TWRP and I plug in the usb cable from PC, the phone reboots, so it unallows me to use sideload.
And also i can't install LineageOS from SD Card, after reboot it just bootloops recovery.
Everything was fine, i successfuly flashed LOS before on this phone, but now when i want new version it just doesn't work.
What can i do?
Edit: Seems like the official LineageOS build for merlinx doesn't work, but official does. How can I fix it?

Categories

Resources