Related
Ok so many of us have successfully rooted our devices and frozen update and renamed security files to avoid losing our root.
What are the proper steps for Dummies like me to accept the Lollipop OTA in December without losing my data?
Also now 4.4.4 is anounced with Bluetooth fixes that I have noticed while streaming
(My gut tells me keep update frozen until a flashable rooted 5.0.)
It was said in another thread NOT to take the 5.0 update until a root method for it has been established. If you wanna keep root, I'd wait. I'm still running stock rooted AND3 firmware/kernel. I'm looking to get the newest update up to today (I think ANG3 or something of that nature.) I'm just not taking updates yet so I can keep my root. I'm having problems with the phone freezing and restarting though so I'd like an update.
Sent from my "ROOTED" SAMSUNG-SM-G900A using XDA Premium 4 mobile app
NG3 is smooth
PS4AndroidHacker said:
It was said in another thread NOT to take the 5.0 update until a root method for it has been established. If you wanna keep root, I'd wait. I'm still running stock rooted AND3 firmware/kernel. I'm looking to get the newest update up to today (I think ANG3 or something of that nature.) I'm just not taking updates yet so I can keep my root. I'm having problems with the phone freezing and restarting though so I'd like an update.
Sent from my "ROOTED" SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am stock rooted with ANG3 pre-installed on my purchased S5. It runs smooth as silk if you use the method posted by muniz_ri in general. All I've done is turned off or frozen some bloatware and installed Chainfire SU 2.16.
My question was more geared towards the person who might want to go from rooted to the lastest OTA without losing data etc. I have been diving in pretty deep to the AT&T side of XDA since leaving sprint a week ago and I think the answer might have been posted by shortydoggg with the soft-bricked thread.
I was hoping someone might be able to tell me a non odin 3.09+ way to remove the freeze on my apps in the correct order to take the OTA without tripping KNOX if I wanted to do that knowing I might loose root.
I thought we might be able to follow muniz_ri and odin the one file back towelroot again after.
Basically I like stock always have, but I want root also for AdAway Titanium Backup Etc. and being a truck driver I wanted the 4.4.4 Bluetooth fix for Iheart radio.
UltraCon79 said:
I am stock rooted with ANG3 pre-installed on my purchased S5. It runs smooth as silk if you use the method posted by muniz_ri in general. All I've done is turned off or frozen some bloatware and installed Chainfire SU 2.16.
My question was more geared towards the person who might want to go from rooted to the lastest OTA without losing data etc. I have been diving in pretty deep to the AT&T side of XDA since leaving sprint a week ago and I think the answer might have been posted by shortydoggg with the soft-bricked thread.
I was hoping someone might be able to tell me a non odin 3.09+ way to remove the freeze on my apps in the correct order to take the OTA without tripping KNOX if I wanted to do that knowing I might loose root.
I thought we might be able to follow muniz_ri and odin the one file back towelroot again after.
Basically I like stock always have, but I want root also for AdAway Titanium Backup Etc. and being a truck driver I wanted the 4.4.4 Bluetooth fix for Iheart radio.
Click to expand...
Click to collapse
It's hard to say what the best approach will be until the update arrives. In the case of 4.4.4, I'm rather confident that a somewhat simple method can be developed to take the update while keeping root. As for 5.0, I have some ideas none ideal but we'll see.
Is Android 4.4.4 for the AT&T version of the Galaxy S5 out? I have a Galaxy S5 AT&T phone but I don't have AT&T service. I am running Android 4.4.2 with build version ND3 is there something newer than this?
Updating to NG3
Het guys, so today I got ahold of Odin 3.09 and the NG3 update, I applied it through Odin in the AP slot and it DID NOT update my phone to NG3. My Baseband still says AND3 and kernel is 3.4.0-2178781
Tue Jul 22 13:58:46 KST 2014. Anybody have any options i can use without having to downgrade to NCE just to upgrade? LOL...Im kinda at a loss,Ive tried it in download mode twice now and no fu go.
Plz disregard my message. I'm good now and running rooted NG3.
On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
wmunn said:
On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
Click to expand...
Click to collapse
No, if you update to lollipop then your ability to have a rooted phone will be lost. The bootloader hasnt changed since the phone was released which is the reason we have been able to rollback the rom. This was a loophole in the original firmware of the s5. When lollipop comes out then it will be a completely different bootloader and will be locked and you will not be able to roll back to kk bootloader. The loophole for this has been patched and there probably wont be another way to root the phone after lollipop considering the guy that found the loophole is now working for googles security team. Bottom line is if you want root then you cant have lollipop.
Sent from my SM-G900A using XDA Free mobile app
miller1821 said:
No, if you update to lollipop then your ability to have a rooted phone will be lost. The bootloader hasnt changed since the phone was released which is the reason we have been able to rollback the rom. This was a loophole in the original firmware of the s5. When lollipop comes out then it will be a completely different bootloader and will be locked and you will not be able to roll back to kk bootloader. The loophole for this has been patched and there probably wont be another way to root the phone after lollipop considering the guy that found the loophole is now working for googles security team. Bottom line is if you want root then you cant have lollipop.
Sent from my SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
How does this affect our device when it gets the lollipop update?
http://www.xda-developers.com/android/supersu-beta-lollipop-root-stock-kernel/
wmunn said:
On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
Click to expand...
Click to collapse
Thanks to chainfire the chances of updating to 5.0 while keeping root seems more doable at this point.
However, based on recent samsung updates for other devices, safestrap may stop functioning after the update as it continues its slow death.
Once again, if having root access is important to you, do no not take the 5.0 update when released until some of us have a chance to evaluate it.
Since I am running dynamic Kat on stock slot right now, I should be safe from updates for now right?
Waiting to see what happens with all this. I did back up my stock rom to an SD card, so I can restore and unroot etc... to get an update if I choose to later.
muniz_ri said:
Thanks to chainfire the chances of updating to 5.0 while keeping root seems more doable at this point.
However, based on recent samsung updates for other devices, safestrap may stop functioning after the update as it continues its slow death.
Once again, if having root access is important to you, do no not take the 5.0 update when released until some of us have a chance to evaluate it.
Click to expand...
Click to collapse
was looking for a post like this. well maybe we might get 5.1 in the next few weeks or sooner so i am sure you will give it a try and a good look and hopefully you will have success in attaining root and a good SS. seems like u da man for this...:good::good:
as for 5.1 or a custom rom...well whose to say what that will bring...
will be waiting to see what happens. will check back here when it comes out. i watch for it everyday and as usual, thank you for all your great work!
miller1821 said:
No, if you update to lollipop then your ability to have a rooted phone will be lost. The bootloader hasnt changed since the phone was released which is the reason we have been able to rollback the rom. This was a loophole in the original firmware of the s5. When lollipop comes out then it will be a completely different bootloader and will be locked and you will not be able to roll back to kk bootloader. The loophole for this has been patched and there probably wont be another way to root the phone after lollipop considering the guy that found the loophole is now working for googles security team. Bottom line is if you want root then you cant have lollipop.
Sent from my SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
Not necessarily, just because (if) the S5 gets 5.0 does not mean the ability to root will be lost just go check out the Verizon S5 forums you'll see they have a method for rooting with 5.0 that in theory should work for us as well. again it is recomended to remain on a 4.4.x rom until this has been fully evaluated.
wmunn said:
On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
Click to expand...
Click to collapse
My suggestion would be not to take any updates until the root capabilities have been evaluated.
As always, research goes a long way towards alleviating fears and stopping panic attacks before they happen. be patient there are great devs here give them time to work
Well, I stopped using the S5 and switched to a oneplus one, happily running CM12 nightlies now
the att gs5 doesn't seem like it's getting any updates..
wmunn said:
Well, I stopped using the S5 and switched to a oneplus one, happily running CM12 nightlies now
Click to expand...
Click to collapse
How are you liking it? I'm seriously thinking about doing the same thing.
I have a coworker that just got the Lollipop update for his Note 3 so that means it will be coming to the S5 very soon!
There is a pre-rooted lollipop update on droid views "http://www.droidviews.com/install-rooted-lollipop-on-att-galaxy-s5-sm-g900a/" . I have updated already and it runs smoothly. The only thing is after you run the update it can take anywhere from 5 to 20 minutes to reboot so just hang tight.
silentscreamz said:
There is a pre-rooted lollipop update on droid views "http://www.droidviews.com/install-rooted-lollipop-on-att-galaxy-s5-sm-g900a/" . I have updated already and it runs smoothly. The only thing is after you run the update it can take anywhere from 5 to 20 minutes to reboot so just hang tight.
Click to expand...
Click to collapse
I used that method as well. Sure, it worked for me, but I came from Dynamic Kat, a well debloated stock rom. Due to this, after installing the update using this method, the built-in apps restore function could not complete due to having all of the useless bloatware back, taking up the extra space I was free to use in Dynamic Kat. Even removing the apps that are safe to remove via Titanium Backup doesn't help because the space is reserved for them. I've also already moved every app that it will allow to move to SD card. I've removed unneeded apps. I've gone through my internal storage to remove any unneeded files.
I've removed most of the apps listed here
This doesn't give me the Bluetooth tether that I used to us for my Gear 1(Running Null Rom). I'd look for an app to cover this but... I can't install anything because I've got no space to do so... I hope a good debloat method comes along soon. I still have root, so I'm hopeful.
Yea, bloatware is ridiculous for this phone. Have you tried the Alliance rom, that is what I run and it's not to bad for bloatware but I have only managed to get 5.6 running. Going to try version 8 today sometime. If you like to customize that is an awesome rom.
Hi folks, new to the S5 forums on here as I just upgraded from my trusty S3 on AT&T. I'm still on the stock 4.4.2 firmware, NG3 build, and I'm wondering if I should just root from here using TowelRoot method or take the 4.4.4 OTA and root from there.
Root your 4.4.2, then use the update while saving root to lollipop and skip 4.4.4 all together.
SoCalHTCFuze said:
Root your 4.4.2, then use the update while saving root to lollipop and skip 4.4.4 all together.
Click to expand...
Click to collapse
I tried to root using TowelRoot but it said device not supported. I'll do some research though. Havent even had the phone 5 hours yet.
MetalHead66 said:
I tried to root using TowelRoot but it said device not supported. I'll do some research though. Havent even had the phone 5 hours yet.
Click to expand...
Click to collapse
You gotta downgrade theres a post on here just type it in the search bar. Pretty easy process
Yes. Follow the 4.4.2 how to root thread, it says that bit still works.
OK thanks a bunch. Getting ready to do that now.
---------- Post added at 03:27 AM ---------- Previous post was at 02:53 AM ----------
Well that was quite easy and I'm a happy camper now! Just had to flash nd3 kernel with odin in order for TR to work then flash my ng3 kernel. So nice to be able to use TiBu. Helium wouldnt install all my apps. Now I can start freezing and uninstalling all the bloatware!
Hey has anyone found a root method for the active (g890a) I've tried everything even CF Autoroot I can't find a darn thing anywhere.
no progress at all...
Sent from my SAMSUNG-SM-G890A using XDA Free mobile app
So I'm seeing where @designgears has taken the most recent update OF3 and merged it with a previous version that is rooted (I'm way over simplifying because this is so beyond my pay grade).
OF3 is the same update the AT&T Active just received.
So would it be possible to Odin back to that previously rootable version, then apply designgears update? Assuming I don't care about Knox and warrant... Or would I just end up with a brick?
Im willing to try it if someone with more experience can outline the exact steps.
Sent from my SAMSUNG-SM-G890A using XDA Free mobile app
A safer option might be to offer your phone to designgears, and have him work his magic. AoN
brobinson2102 said:
So I'm seeing where @designgears has taken the most recent update OF3 and merged it with a previous version that is rooted (I'm way over simplifying because this is so beyond my pay grade).
OF3 is the same update the AT&T Active just received.
So would it be possible to Odin back to that previously rootable version, then apply designgears update? Assuming I don't care about Knox and warrant... Or would I just end up with a brick?
Im willing to try it if someone with more experience can outline the exact steps.
Sent from my SAMSUNG-SM-G890A using XDA Free mobile app
Click to expand...
Click to collapse
If you have taken OF3 update I am pretty sure you can't odin back due to them patching the pingpong root expoit. You can try to flash just the OE2 kernel and try pingpong root as well. I am 99% sure that once you update to the OF3 bootloader you are stuck on OF3 without root.
If someone has the OTA of OF3 I can make the same flashable like I did with the S6.
I'm pretty sure the active shipped with an update kernel already regardless of OF3 or earlier. And the kernel patch is what blocked the ping pong root.
I have the active too and even before the update couldn't find anything on a valid root. But I also didn't try.
designgears said:
If you have taken OF3 update I am pretty sure you can't odin back due to them patching the pingpong root expoit. You can try to flash just the OE2 kernel and try pingpong root as well. I am 99% sure that once you update to the OF3 bootloader you are stuck on OF3 without root.
If someone has the OTA of OF3 I can make the same flashable like I did with the S6.
Click to expand...
Click to collapse
Alright, I've taken the OF3 OTA update already...it's a done deal. Do I have the OTA files laying around somewhere on my phone still?
And assuming you can make a flashable file from an OF3 OTA file, that would give me a safety net if I attempted to ODIN an early S6 OE2, yes?
So brick or not, I could test this hypothesis and get back to a stock unrooted pro ably with a blown Knox fuse?
When the student is ready, the teacher will appear.
Cheers.
b.
Sent from my SAMSUNG-SM-G890A using XDA Free mobile app
brobinson2102 said:
Alright, I've taken the OF3 OTA update already...it's a done deal. Do I have the OTA files laying around somewhere on my phone still?
And assuming you can make a flashable file from an OF3 OTA file, that would give me a safety net if I attempted to ODIN an early S6 OE2, yes?
So brick or not, I could test this hypothesis and get back to a stock unrooted pro ably with a blown Knox fuse?
When the student is ready, the teacher will appear.
Cheers.
b.
Sent from my SAMSUNG-SM-G890A using XDA Free mobile app
Click to expand...
Click to collapse
The build numbers might be the same but there are extra things in the active rom that are not present in the s6 rom and vise versa. Also the s6 active did ship with the ping pong root exploit fixed....
Currently downloading 129.49MB.
Updated, it's still 5.02 G925AUCU2AOF4
morbidz said:
Currently downloading 129.49MB.
Updated, it's still 5.02 G925AUCU2AOF4
Click to expand...
Click to collapse
most likely the stagefright fix..
The S6 (non-Edge) is getting an update today as well. Likely the same OF4 security enhancement for Stagefright that the Active received some time ago.
I just finished installing it. Only change I can tell so far is the stagefright fix (the detector app now reports my phone as secure, whereas a couple of days ago it didn't)
I assume the process is unroot, apply update, reroot? Or does this patch PingPongRoot too?
I don't think you can regain root access after you update beyond OF3. PingPong only works on versions prior to OF3. I purchased my S6 Edge with OF3 already installed on it. Very bummed and optimistically wishing someone will find a way to root OF3 and beyond. I hope they are not making it more and more difficult to root with these new "mandatory" updates that the phone apparently updates without consent. It gives you the ability to "postpone" the update but at one point or another applies the update automatically.
Ugh well I mistakenly updated tonight thinking the latest version was e2.
I attempted ping-pong root beta 6 and it failed.
At a loss. Please update me if anyone finds a new root method.
definitely i guess i will just wait for it
could someone grab this OTA please and upload it. i need it to fix a phone.
el_venga said:
could someone grab this OTA please and upload it. i need it to fix a phone.
Click to expand...
Click to collapse
Yes please.
At least all the libstagefright*.so libraries
Thanks in advance.
Vaira said:
Yes please.
At least all the libstagefright*.so libraries
Thanks in advance.
Click to expand...
Click to collapse
i downgraded to OF3 and got baseband unknown. thats my issue. you need root to apply the libraries btw.
does anybody have a system dump for this update?
Man, I'm still stuck on G925AUCU1A0C9. I have yet to receive ANY update since I got it on launch day.
spotdog14 said:
Man, I'm still stuck on G925AUCU1A0C9. I have yet to receive ANY update since I got it on launch day.
Click to expand...
Click to collapse
do a odin update to OF3. afterwards you are supposed to get OF4.
Would someone grab the OTA update (before applying). dkcheung on the regular S6 forum wants a FlashFire modified version to keep PingPong root. Already have the OF3 Odin files necessary, just need the OTA to be able to patch the modem.bin and boot.img as well as fix up the OTA for FlashFire.
http://forum.xda-developers.com/showpost.php?p=62390878&postcount=8
The file will be located in /cache/fota/XXXX.cfg (in reality, it's a zip file)
I can't access that directory without root
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
OF3 update
[email protected] said:
I don't think you can regain root access after you update beyond OF3. PingPong only works on versions prior to OF3. I purchased my S6 Edge with OF3 already installed on it. Very bummed and optimistically wishing someone will find a way to root OF3 and beyond. I hope they are not making it more and more difficult to root with these new "mandatory" updates that the phone apparently updates without consent. It gives you the ability to "postpone" the update but at one point or another applies the update automatically.
Click to expand...
Click to collapse
same here...if u find rooting for OF3 then update me too
wesgarner said:
Would someone grab the OTA update (before applying). dkcheung on the regular S6 forum wants a FlashFire modified version to keep PingPong root. Already have the OF3 Odin files necessary, just need the OTA to be able to patch the modem.bin and boot.img as well as fix up the OTA for FlashFire.
http://forum.xda-developers.com/showpost.php?p=62390878&postcount=8
The file will be located in /cache/fota/XXXX.cfg (in reality, it's a zip file)
Click to expand...
Click to collapse
of3 root is needed to grab OF4 ota
el_venga said:
of3 root is needed to grab OF4 ota
Click to expand...
Click to collapse
I am assuming he can root OF3 OTA when he gets the update, in which case we can then pull OF4 OTA and root that update as well. Unfortunately, my phone isn't pulling the OF3 update to post so if anyone could send him the file that would be awesome.
@wesgarner thank you for the help, I will send you the file if my phone pulls down the update (phone says up to date as of now) as soon as I can get it.
Hoping this is what you need. This is the OTA update I got while being on OE2.
https://mega.nz/#!1JIQGKza!RP-nSirrdXy4joEtVaXGy7QW6UtlTcbbiVQf-vuq2lc
99% of this is copied and pasted from designgears's post for his great job on the FlashFire OF3 update.
OE2 to OF3 by designgear: http://forum.xda-developers.com/att-galaxy-s6/general/g920aucu2aof3-flashfire-update-t3156221
G920AUCU2AOF3 -> G920AUCU2AOF4 Updater (for users rooted since OE2 PingPong root)
This is a modified version of the official OTA.
Upgrade from OF3 to OF4
Retains Root
Retains OE2 Bootloader
Retains OE2 Recovery
All checks removed (deleted, modified system files won't be patched, but it won't break the entire patching process)
If you unroot while on OF4 you will have to downgrade to OE2 kernel with Odin and use PingPong root.
Edited files WILL NOT be updated, they're skipped instead of breaking the entire update process like the stock OTA. If you want to update those files they need to be returned to stock OE2.
This has been verified to not trip the KNOX warranty bit.
Download and unzip "S6-OF3 to OF4 Update.7z," extract G920AUCU2AOF3-OF4.zip to your sdcard.
In Flashfire select "Flash ZIP or OTA"
Select G920AUCU2AOF3-OF4.zip from your sdcard
Change the reboot option to download mode.
Leave all other settings default and flash.
After it has flashed, reboot to download mode (if not done via FlashFire, press and hold home, power, and volume down) and use Odin to flash the updated kernel and modem.
In Odin put boot.tar.md5 in the AP slot.
Put modem.tar.md5 in the CP slot.
Leave all other settings alone and click start.
Once the phone has rebooted you should be on OF4.
S6-OF3 to OF4 Update.7z
MD5: a9544f38cdb39eb568c240fd0d829143
https://www.androidfilehost.com/?fid=24052804347796479
Also, here is the original (non-modified) OTA package if anyone is interested in it.
MD5: 40c22fe9224c47af20bcc098a8b9c11b
https://www.androidfilehost.com/?fid=24052804347796478
everything worked like it should! thanks for the work bro! Always love flashing stuff on flashfire got that itch again
Any chance this would work for the S6 edge?
Or S6 Active?
dkcheung said:
Any chance this would work for the S6 edge?
Click to expand...
Click to collapse
crispy1805 said:
Or S6 Active?
Click to expand...
Click to collapse
Sadly, no. Edge's latest build number is G925AUCU2AOF4 and Active is G890AUCU2AOF4.
If anyone can provide me me the OTA zip (located /cache/fota/XXX.cfg) as well as the modem.bin and boot.img from OF3 (likely provided in any of the FlashFire modified updates released, if not will need the latest Odin images plus any OTA updates since to patch to OF4), I can modify the OTA and patch the images for you guys.
wesgarner said:
Sadly, no. Edge's latest build number is G925AUCU2AOF4 and Active is G890AUCU2AOF4.
If anyone can provide me me the OTA zip (located /cache/fota/XXX.cfg) as well as the modem.bin and boot.img from OF3 (likely provided in any of the FlashFire modified updates released, if not will need the latest Odin images plus any OTA updates since to patch to OF4), I can modify the OTA and patch the images for you guys.
Click to expand...
Click to collapse
Thanks wesgarner! I've linked the forum where the S6 edge OF3 odin files. Hope this is what you are talking about.
http://forum.xda-developers.com/att-galaxy-s6-edge/general/odin-files-g925aucu2aof3-t3169219
wesgarner said:
Sadly, no. Edge's latest build number is G925AUCU2AOF4 and Active is G890AUCU2AOF4.
If anyone can provide me me the OTA zip (located /cache/fota/XXX.cfg) as well as the modem.bin and boot.img from OF3 (likely provided in any of the FlashFire modified updates released, if not will need the latest Odin images plus any OTA updates since to patch to OF4), I can modify the OTA and patch the images for you guys.
Click to expand...
Click to collapse
I will look into locating for the s6 active
Sent from my SAMSUNG-SM-G890A using Tapatalk
dkcheung said:
Any chance this would work for the S6 edge?
Click to expand...
Click to collapse
crispy1805 said:
Or S6 Active?
Click to expand...
Click to collapse
dkcheung said:
Thanks wesgarner! I've linked the forum where the S6 edge OF3 odin files. Hope this is what you are talking about.
http://forum.xda-developers.com/att-galaxy-s6-edge/general/odin-files-g925aucu2aof3-t3169219
Click to expand...
Click to collapse
That'll do. If you can grab the OTA (have the instructions above), I'll modify and patch everything up for you. The process is pretty simple, but keep in mind I don't have a device to test it on before posting.
jsanta11 said:
I will look into locating for the s6 active
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
Just looked, and it appears that the S6 Active was never susceptible to PingPong exploit.
That means to get root on the Active would require tripping the KNOX warranty bit (until another viable exploit is found).
If you've already done that and just want the OTA update, I can do that!
Just a dumb question but I thought I saw somewhere DG mentioned something along the lines of loading the OE2 kernel for the active, is that possible with the new boot loader to obtain root for the Active folks? Sorry don't mean to high jack the thread. (Personally don't care if knox is tripped)
Flashed on S6 , working good thxs
Two questions
Thank you so much for this! I have two questions: 1. Will this work with a deodexed rom and 2. If I reflash OE2 firmware with Odin, will my s6 be completely downgraded to OE2?
wesgarner said:
Just looked, and it appears that the S6 Active was never susceptible to PingPong exploit.
That means to get root on the Active would require tripping the KNOX warranty bit (until another viable exploit is found).
If you've already done that and just want the OTA update, I can do that!
Click to expand...
Click to collapse
I will upload the Ota and as for tripping knox no biggie won't be the first plus I have a edge as backup so am good. Greatly appreciate of you can work you're magic
Sent from my SAMSUNG-SM-G890A using Tapatalk
Just FYI: I'm on Cleanrom 1.1 and had done the flashfire update to OF3. I used this to update to OF4 without a problem, but I'm still showing to be vulnerable to the stagefright exploit. Any reason why the update wouldn't have patched that? It shows that I'm on OF4 on the device.
PMDColeslaw said:
Just FYI: I'm on Cleanrom 1.1 and had done the flashfire update to OF3. I used this to update to OF4 without a problem, but I'm still showing to be vulnerable to the stagefright exploit. Any reason why the update wouldn't have patched that? It shows that I'm on OF4 on the device.
Click to expand...
Click to collapse
Google wasn't able to patch all of the CVE stagefright exploits in the first round. Some more have appeared.
Check out this article that explains it all: http://phandroid.com/2015/08/17/psa-your-android-phone-may-still-have-stagefright-vulnerability-even-if-it-was-patched/
I'm sure OF5 will come out soon enough to resolve this.
jsanta11 said:
I will upload the Ota and as for tripping knox no biggie won't be the first plus I have a edge as backup so am good. Greatly appreciate of you can work you're magic
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
Ok, cool. Just send me the OTA zip plus the Odin files leading up to the OTA, and we will be good to go. I have the Edge one prepped (already extracted the boot.img and modem.bin from the Oden files) so just waiting on the OTA there.
dave812 said:
Thank you so much for this! I have two questions: 1. Will this work with a deodexed rom and 2. If I reflash OE2 firmware with Odin, will my s6 be completely downgraded to OE2?
Click to expand...
Click to collapse
No, this won't work with a deodexed ROM as this patches odex files amongst others. It's meant for only original ROMs and OTAs as it is simply a modification to the original OTA.
If your recovery and bootloader are still at OE2, then yes it will be completely downgraded to OE2. In that case, use designgear's OE2 to OF3 update then this update to go to OF4.
tbird57 said:
Flashed on S6 , working good thxs
Click to expand...
Click to collapse
No problem!
c0ldburn3r said:
Just a dumb question but I thought I saw somewhere DG mentioned something along the lines of loading the OE2 kernel for the active, is that possible with the new boot loader to obtain root for the Active folks? Sorry don't mean to high jack the thread. (Personally don't care if knox is tripped)
Click to expand...
Click to collapse
Sadly, not possible... Sorry!
Can somebody please post a pic of their "about phone" page? I want to compare my kernel, modem etc to someone who has flashed this.