Related
Nightly builds for the Thrill (P925) has stopped, P920 builds will work on Thrill P925.
Builds can be found here:
http://download.cyanogenmod.com/?device=p920
Changelog can be found here:
http://cm-nightlies.appspot.com/?device=p920
There should be NO problems at all to upgrade from the latest SelfKang to the lastest Nightly Build.
INSTRUCTIONS:
* Create a nandroid backup in CWM.
* Install the latest Nightly.
* Reboot.
If you're currently using a stock rom or a custom rom that is not based on CM then you must make a factory reset/format data in CWM after installing the latest nightly.
Else you'll get stuck in a bootloop.
NOTICE:
* Please note that this rom will replace your old one if you have a stock rom (Froyo or Gingerbread).
Everything on your current rom will be useless, so backup everything!
If you're currently using Froyo, then you need to flash the latest Baseband;
Use the "LG Updater tool" to update to the latest Stock version so you'll get the latest Baseband, re-root your phone and download Rom Manager from the market.
Install CWM, do a Nandroid backup and install the latest nightly build of CM7.
WHY YOU SHOULDN'T USE CM:
If you're using the 3D functions of your phone as well as the HDMI then you shouldn't change to CM at the moment.
3D and HDMI is broken.
And yes, these releases are newer than the SelfKang4.
This is Not my mod and try asking in this thread before posting me a PM, you'll get a faster reply here.
I've never understood Nightly builds.
What's most of the difference you'll see?
Sent from my LG-P925 using Tapatalk
this may be a full ROM... right?
i used to use CM7 in my SE X10 Mini Pro, and i loved it...
but here on thrill one... what r the limits? does it has 3D??? Radio??? GPS??? Wifi??? it's all working?
i tried to read changelog, but as i am not a developer i cant understand clearly 80% of the info... can u tell what it's not working?
one more question is... is it running GB 2.3.7???? dn't i need to change baseband to GB one???? i have stock froyo rom from LG...
azhhael said:
this may be a full ROM... right?
i used to use CM7 in my SE X10 Mini Pro, and i loved it...
but here on thrill one... what r the limits? does it has 3D??? Radio??? GPS??? Wifi??? it's all working?
i tried to read changelog, but as i am not a developer i cant understand clearly 80% of the info... can u tell what it's not working?
one more question is... is it running GB 2.3.7???? dn't i need to change baseband to GB one???? i have stock froyo rom from LG...
Click to expand...
Click to collapse
I think 3D and HDMI aren't working. Radio, GPS, and wifi were all working before the nightly. I can confirm that wifi is working great. I haven't used GPS so not sure how well it works or not.
It is running 2.3.7 . No you don't need to do anything with the baseband.
The only complaint I have is that the person i call using this rom hears a really bad echo
louisianavoodoo said:
The only complaint I have is that the person i call using this rom hears a really bad echo
Click to expand...
Click to collapse
+1
Also should cell standby be taking 72% of battery? Been barely using for hr and a half and already down to 70% seems to drain faster on standby than when I'm on it.
Sent from my LG-P925 using XDA App
How about make it mount internal and external SD card?
Is there a way to get headset recognition as well? I pressed mine a couple time while playing music, wouldn't pause or skip tracks like normal CM7 would. I've had atleast 2 reboots now but everything else seems great
Alright, time to start building some nightlies.........Ill be on my own in a few weeks....
Yup, but we need something other than this trashy 'CyanogenMod'.
I personally hate CM in general, it's not n00b friendly and it just looks plain dumb.
But if anyone could rocket a GB ROM without having to install a GB break, then count me in.
I hope to see a Froyo ROM soon.
Love you guys but the Thrill is trash and the mods here suck.
gentzleon said:
Alright, time to start building some nightlies.........Ill be on my own in a few weeks....
Click to expand...
Click to collapse
Sent from my LG-P925 using Tapatalk
rydeN- said:
Yup, but we need something other than this trashy 'CyanogenMod'.
I personally hate CM in general, it's not n00b friendly and it just looks plain dumb.
But if anyone could rocket a GB ROM without having to install a GB break, then count me in.
I hope to see a Froyo ROM soon.
Love you guys but the Thrill is trash and the mods here suck.
Click to expand...
Click to collapse
Eh, I agree to a certain extent. However, I wouldn't count noobs as those rooting, flashing ROMs, etc etc. So if they can't be bothered to google some CM info, welll, then...
As far as dumb, most of the time, our phones look dumb out of the box. The CM ROM is just as customizable as any other ROM. I got rid of the skateboard alien ASAP. What is kinda cool is the theme chooser so that you make a bunch of the stuff like battery stat, various widgets, dialer, etc all look different in one click.
I think most of us are just kinda waiting until the new cool phones come out in 2012 and move on.
are there any kernels for this with OC? im coming from foryo and my benchmark would hit up to 3300. now i cant even reach 3k.
uhhhh I flash this rom... and when tried to go back on stock froyo. It stays stuck on LG logo... I did a backup .... flash other roms before and was able to return to stock rooted. It only works with this rom and two others roms" thriller and doomded ... what did I do wrong? I miss my 3D functions ;(
Sent from my SAMSUNG-SGH-I727 using XDA App
I think a lot of people are having the issue with the call echo. Seems to be a problem with the ambient/noise cancellation microphone. Not a big deal if you turn down the call volume.
I am having other issues with the first nightly; can't select items in the notification bar, misaligned keyboard, etc. so will be sticking with SK4 for the time being. That being said, however; it is nice that the Thrill is getting a little love. I'll still be checking the dailies and looking out for a stable build.
donavo said:
are there any kernels for this with OC? im coming from foryo and my benchmark would hit up to 3300. now i cant even reach 3k.
Click to expand...
Click to collapse
Not a kernel, but you can use the same script like before, Check Tekahuna's post, you can get the files for CM there aswell.
CXENTE said:
uhhhh I flash this rom... and when tried to go back on stock froyo. It stays stuck on LG logo... I did a backup .... flash other roms before and was able to return to stock rooted. It only works with this rom and two others roms" thriller and doomded ... what did I do wrong? I miss my 3D functions ;(
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
If you want to go back to froyo, use the LG updater tool to go back to stock, there is a few threads that describes how. After that, you can just root your device and go back to the old backup.
thank you very much.... I will do just that
Sent from my SAMSUNG-SGH-I727 using XDA App
Had the weirdest bug ever on the 2nd nightly last night. I was at the mall playing cards when my phone suddenly made this alarm-esque noise. No matter what I did, i couldn't get it to stop. I had to restart my phone which finally put an end to it. Hopefully i don't experience that again lol.
Nightly 2 still has the echo thing going on. I'll try the new ones as they come out.
I have a question : Before on froyo, my SD had a partition that i could put various things into. After flashing CM7, this partition seems to be invisible from my phone (root explorer). For some reason, my computer at home cannot access this partition, but my computer at work can. I have filled my internal sd card from restoring apps. How can I access this partition, or repartition so the internal SD has more space?
Any help with this would be appreciated.
kurrptsenate said:
I have a question : Before on froyo, my SD had a partition that i could put various things into. After flashing CM7, this partition seems to be invisible from my phone (root explorer). For some reason, my computer at home cannot access this partition, but my computer at work can. I have filled my internal sd card from restoring apps. How can I access this partition, or repartition so the internal SD has more space?
Any help with this would be appreciated.
Click to expand...
Click to collapse
I completely know what you mean by SD card.
If you goto CM7 settings> Application, there should be an option named "Use internal storage". If you check that box and reboot, it just flip flops the SD cards. You can access the other, but can't the other. Kinda annoying, wish I had a 32GB MicroSD right about now
i tried going back to froyo from this and it was stuck on LG too. i had many backups. i was able to go back to froyo by flashing doomed again. idk what it is about that one but it took it back to froyo just fine. and from there you can flash ur recovery and ull b fine
I had the crazy-alarm-type bug happen again just now. I believe it was caused by a notification sound that is supposed to play, but instead, starts clipping at an alarming rate at full volume. I tried just about everything you can think of to stop this cacophonous noise, but had to ultimately shut down the phone.
As far as the "SD thing", I did find out that the other portion of the card is actually listed under "mnt" and then "emmc" for anyone that was wondering. I can access this from the phone as well.
So far the nightly builds are great, thanks for the hard work!
Sent from my LG-P925 using XDA App
I want not talk to much
Just want to create a topic where people can write their news about CM 10.1
I think such a thread could be interesting for people that heard from Android 4.2 - Jelly Bean
So let's start the topic
You can download the last UNOFFICIAL build of CM10.1 for SGS i9000 from:
http://forum.xda-developers.com/showthread.php?t=2013707
THIS BUILD NOT WORK PERFECT! - (26.11.12)
For most of us, simply flashing the 4.2 Gapps package is good enough already.
snapper.fishes said:
For most of us, simply flashing the 4.2 Gapps package is good enough already.
Click to expand...
Click to collapse
Maybe for you
Lots of people have been waiting for CM10.1
I installed that rom yesterday (and today i installed the new build) and it seems to work fine.
Except for me the swype-like keyboard isn't working, does anyone know where i can find known issues or bug reports for this rom?
sterfpaul said:
I installed that rom yesterday (and today i installed the new build) and it seems to work fine.
Except for me the swype-like keyboard isn't working, does anyone know where i can find known issues or bug reports for this rom?
Click to expand...
Click to collapse
you can ask in the post of the developer here:
http://forum.xda-developers.com/showthread.php?t=2013707
Same here
Everything I tried, except swype, working!
Keyboard working - but not the swype part
work fine fast nice interface
but i think it haven't a long battery life if i compare it with gingerbread
every thing is working fine for me with cgm 10
Hi All,
Model: GT-7310
ROM: [JB-mr1/4.2.2] AOKP (latest March 5 build)
This is a nice ROM for the GT-7310. So far, everything works well, except the SD card reader (Model #: EPL-1PREBEGXAR) is not recognized. The SD card reader worked under stock ICS with no problems.
Is anyone else using this ROM (or CM10.1) having a similar issue? Is there way to get it working? Thanks in advance for any advice.
-froo-
It's most likely an issue with the rom and there isn't a current fix. Cm10.1 is a work in process and all the bugs are not out of it. They may never be for you to use your external sd card, but you can try newer versions as that come out and maybe you'll get lucky.
What was best before sliced bread?
jd1639 said:
It's most likely an issue with the rom and there isn't a current fix. Cm10.1 is a work in process and all the bugs are not out of it. They may never be for you to use your external sd card, but you can try newer versions as that come out and maybe you'll get lucky.
What was best before sliced bread?
Click to expand...
Click to collapse
Thanks jd.
In the greater scheme, it's a minor strike against a really good JB ROM for this Tab. Hopefully though, a fix can be found and incorporated into future builds.
-froo-
Hey guys, I've been coming to XDA-Dev since I started getting Android devices. You guys have helped me hack my Kindle Fire to have ICS runing on it, my Nexus 7 running a custom ROM, my Samsung Galaxy Player 4.0 running a custom ROM and now my Nexus One is running a custom ROM.
Now I've tried all sorts of roms on my Nexus One. The stock rom doesn't cut it for me but I don't want to deal with the camera bugs with any form of ICS or JB rom that's running... I then came across MIUI. Never heard of it but took a chance. I LOVE IT. Problem is, it is constantly force closing apps. I have Blackrose installed, I have Mounts2SD running to my 8gb class 10 sd card (parition 1gb). And it's ok at first but within a couple of days it starts to have all sorts of problems. Pretty much everything has failed from Gapps to the mms service, it's locked up while taking images too.
Any ideas on what might be causing this problem? I've used ROM Manager to fix permissions as I read that it could be the problem. That fixed the gapps problem but I'm still getting the odd force close, sometimes where I have to remove the battery to get it to boot again. I've tried QND MIUI 2.3.30r4 and I've also tried the official 2.3.30 from the MIUI site but they both seem to have the same problems. I'm currently running the latter.
Thanks in advance!
A little late but....
If you are still using this phone you can check out my guide here...
http://forum.xda-developers.com/nexus-one/general/miui-2-3-30-english-twrp-touch-recovery-t2817306
Running flawlessly over a year and a half or so. I've made minor changes and adjustments which can be manually done.
Hi I have ordered a brand new phone Htc J One from Japan.I had the previous One X and I had intalled the ViperX4.0.6 edition which was great.I wonder if I install the ViperOne 4.3.0 which is for global Htc One,will I have any issues with the extra sdcard which has extra on board.Also the Lte will it works?cause I have noticed some questions in the forum without clear answers.
Thanks beforehand
sadly there is no custom ROM available for HTC J One HTL22
That was a kick in the balls ,but I hope that maybe a special release will come out,
thanks
yeah you should have done some research before ordering it
or waited for M8
That was the last think I had in my mind,I found a pennyworth at ebay,the J edition has the extra sd advance and I got it.That's ok
still..is it rootable?At least I have the root benefits
Funkyjohn said:
still..is it rootable?At least I have the root benefits
Click to expand...
Click to collapse
yes it can be rooted and S-OFF'ed
Funkyjohn said:
Hi I have ordered a brand new phone Htc J One from Japan.I had the previous One X and I had intalled the ViperX4.0.6 edition which was great.I wonder if I install the ViperOne 4.3.0 which is for global Htc One,will I have any issues with the extra sdcard which has extra on board.Also the Lte will it works?cause I have noticed some questions in the forum without clear answers.
Thanks beforehand
Click to expand...
Click to collapse
There is an old version 2.7.0 worked on HTL22.
http://www.androidfilehost.com/?fid=23159073880935016
4.3.0 version here.
http://bbs.gfan.com/android-6986611-1-1.html
s2k7 said:
There is an old version 2.7.0 worked on HTL22.
http://www.androidfilehost.com/?fid=23159073880935016
4.3.0 version here.
http://bbs.gfan.com/android-6986611-1-1.html
Click to expand...
Click to collapse
And here is Android Revolution HD 61.1 and Renovate 2.1.0 that i have ported to HTL22:
Android Revolution HD 61.1: https://drive.google.com/file/d/0B2i3wyFZjDbLaHVaQ2wtbXEtWlE/edit?usp=sharing
Renovate 2.1.0: https://drive.google.com/file/d/0B2i3wyFZjDbLczVTZ1Vnc2J1OVU/edit?usp=sharing
Kernel ElementalX 13.4: https://drive.google.com/file/d/0B2i3wyFZjDbLbzEzODhfVW0tR28/edit?usp=sharing
So and so
KuroKeita said:
And here is Android Revolution HD 61.1 and Renovate 2.1.0 that i have ported to HTL22:
Android Revolution HD 61.1: https://drive.google.com/file/d/0B2i3wyFZjDbLaHVaQ2wtbXEtWlE/edit?usp=sharing
Renovate 2.1.0: https://drive.google.com/file/d/0B2i3wyFZjDbLczVTZ1Vnc2J1OVU/edit?usp=sharing
Kernel ElementalX 13.4: https://drive.google.com/file/d/0B2i3wyFZjDbLbzEzODhfVW0tR28/edit?usp=sharing
Click to expand...
Click to collapse
Hi,I tested both Roms but both have bugs.
The Android Revolution HD 61.1 crashes when you close bluetooth,radio does not work,bought apps cannot installed,bluetooth does not give you the abillity to call,sd is invisible,I havent noticed anything else yet ,but it's a fast rom.
The Renovate 2.1.0 is unworkable, you cannot control the touchscreen.
I have found this site from vietnam which gives many options for alternative roms
http://www.tinhte.vn/threads/htc-j-...oc-phat-trien-boi-huukhai-15-04-2014.2261036/
but still !! all the roms have issues with the touchscreen at list for me.
Maybe the vietnam htl22 have different drivers.
I take the roms from this site
http://htcsoku.info/htcsokudev/2013device/m7_wlj/dev/global_edition/beta/
it's japanese,they worked for me but still have various bus which it is announced.The best i tried is the HTC Sense 5.5 με Android 4.3 beta 1 it's very stable and fast,the only issue is the bluetooth calling
Also now I am installing the Viper Ver 6.0.1 from the vietnam site which I dont know if is ok yet but at least the screen works
HTL22 is a very strange phone without much interest from the developers ,sadly.I'm not from Japan.I bought it hoping that it could give the advance from the international version.But the extra sd was a huge exchange about the rom support which we dont enjoy.
Funkyjohn said:
Hi,I tested both Roms but both have bugs.
The Android Revolution HD 61.1 crashes when you close bluetooth,radio does not work,bought apps cannot installed,bluetooth does not give you the abillity to call,sd is invisible,I havent noticed anything else yet ,but it's a fast rom.
The Renovate 2.1.0 is unworkable, you cannot control the touchscreen.
I have found this site from vietnam which gives many options for alternative roms
http://www.tinhte.vn/threads/htc-j-...oc-phat-trien-boi-huukhai-15-04-2014.2261036/
but still !! all the roms have issues with the touchscreen at list for me.
Maybe the vietnam htl22 have different drivers.
I take the roms from this site
http://htcsoku.info/htcsokudev/2013device/m7_wlj/dev/global_edition/beta/
it's japanese,they worked for me but still have various bus which it is announced.The best i tried is the HTC Sense 5.5 με Android 4.3 beta 1 it's very stable and fast,the only issue is the bluetooth calling
Also now I am installing the Viper Ver 6.0.1 from the vietnam site which I dont know if is ok yet but at least the screen works
HTL22 is a very strange phone without much interest from the developers ,sadly.I'm not from Japan.I bought it hoping that it could give the advance from the international version.But the extra sd was a huge exchange about the rom support which we dont enjoy.
Click to expand...
Click to collapse
all HTL22 in vietnam is shipped directly from Japan so i don't think it driver issue, all the issues you encountered haven't been reported by anyone who use those roms, weird, the only issue that all roms have is the NFC can't work at all
---------- Post added at 10:15 AM ---------- Previous post was at 10:10 AM ----------
KuroKeita said:
all HTL22 in vietnam is shipped directly from Japan so i don't think it driver issue, all the issues you encountered haven't been reported by anyone who use those roms, weird, the only issue that all roms have is the NFC can't work at all
Click to expand...
Click to collapse
oh, i figured out why you encountered those issue, it's indeed because of the hardware drivers, first, you need to go back to stock and then update OTA to the newest software number and then flash recovery and flash my rom, that it, all issues will be fixed
KuroKeita said:
all HTL22 in vietnam is shipped directly from Japan so i don't think it driver issue, all the issues you encountered haven't been reported by anyone who use those roms, weird, the only issue that all roms have is the NFC can't work at all
---------- Post added at 10:15 AM ---------- Previous post was at 10:10 AM ----------
oh, i figured out why you encountered those issue, it's indeed because of the hardware drivers, first, you need to go back to stock and then update OTA to the newest software number and then flash recovery and flash my rom, that it, all issues will be fixed
Click to expand...
Click to collapse
Thanks for the reply Kurokeita,I haven't also thought about the ota update that I didn't received.I was on a harry to root it when I received it from the posts and I didn't update it. 9/10 roms that I have tried had the same issue with the screen.My problem now is that I havent the original stock recovery to flash it.I kept the stock kddi backup rom but not the stock recovery.Can I you post it?
Also I have tried the Viperonej 6.0.1 its great rom but a bit slow!My benchmarks droped to (antutu 25600 and quadrant 11650) with other roms I had 28450.The Android Revolution HD 61.1 was very fast but unstable.The rom is a little laggy and the radio don't work!I dont care for the nfc.The great issue for me is that bluetooth calling is working and I'm happy for this cause all the working roms I have tried were buggy with this issue.I am hoping for an update.
thanks man and I am hoping to sent me the boot.img
Funkyjohn said:
Thanks for the reply Kurokeita,I haven't also thought about the ota update that I didn't received.I was on a harry to root it when I received it from the posts and I didn't update it. 9/10 roms that I have tried had the same issue with the screen.My problem now is that I havent the original stock recovery to flash it.I kept the stock kddi backup rom but not the stock recovery.Can I you post it?
Also I have tried the Viperonej 6.0.1 its great rom but a bit slow!My benchmarks droped to (antutu 25600 and quadrant 11650) with other roms I had 28450.The Android Revolution HD 61.1 was very fast but unstable.The rom is a little laggy and the radio don't work!I dont care for the nfc.The great issue for me is that bluetooth calling is working and I'm happy for this cause all the working roms I have tried were buggy with this issue.I am hoping for an update.
thanks man and I am hoping to sent me the boot.img
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=23212708291675843
That id the stock 4.1.2 from KDDI, just download it and rename to PN07IMG and copy it to your ext-sdcard and then reboot into hboot, it then search for stock rom in the ext-sdcard and will ask if you want to update or not, just press the volume up button and the update process will start, after all is done, update your firmware to the newest version to get the lastest drivers and then once again update the stock 4.1.2 to get back to hboot 1.52 (all roms that have been ported to HTL22 will have touch screen issue on hboot 1.54, still haven't figured out why that happen yet), and flash recovery and flash the rom you want and all work fine\
About ARHD61.1 lagging issue, i'm not sure if that is just your device problem but when i used that rom i didn't notice any issue, try wipe cache and dalvik-cache and see if that solve your issue with lagging, about the radio, i don't used it so i have no idea, will ask others who used ARHD61.1 if they have encountered it or not
And here is the Renovate 2.2.0.2, make sure you full wipe before flash this rom so that Tweak app (it's like venom tweak) work properly
https://docs.google.com/file/d/0B8smFc9Lui2tZGs5WktTbGduSjA/edit?pli=1 in my opinion this is the best rom that i ever used, flash it and use with kernel ElementalX 13.4 for best performance and battery life
Thanks about your support.I will try you the firmware update.I have the hboot 1.54.0000 and radio 1.23.11.1209 and its S-OFF.
About the ARHD61.1 is very fast ,it has a lot of bug maybe you confused with the viperone 6.0.1 I told,sorry.At ARHD61.1 I noticed varius bugs as:
invisible externalSD,when I open the bluetooth and the disable it the hol phone crashes,bought apps cannot installed.I always make a full wipe before installing from the option which give any rom.
The Viperone6.0.1 is very stable.The only issue is the radio bug and that it's a little laggy with low benchmarks.But it works fine.
I havent tried the ElementalX 13.4 cause I dont care about overclocking but as you say i will try it.
The major thing that I have noticed in evry rom is that the bluetooth works only for transer data or listen music when I tried to call it was dead.The only roms that worked properly was the viper 2.7 and the viper 601.The viper 2.7 is a tweked KDDI version with no error BUT it takes you 200mb ram away!you only see 1.5gb,its slow as the viper6 and contence the 4.2.2 android.
I will try to update the only thing I fear is that due to I live in Greece the update never wont come.I'LL SEE
Unfotunately my friend I rolled back the phone to hboot 1.52 and still I couldnt control the screen to Renovate 2.2.0.2 rom.I had done all the updates.I dont know what is wrong.I will return to the Viperone 6.10 and when a solution will come I will try again.
viperone rom
Hi friend
i am about to buy this phone htj22 because of the sd card but i only want to install viperone rom.
is it possible to install 5.8.0 because beside all the tweaks i want the new twak ''unlock weather animation fron sense 4''\
Thank you.
Vasilis.
Vasilislarisa said:
Hi friend
i am about to buy this phone htj22 because of the sd card but i only want to install viperone rom.
is it possible to install 5.8.0 because beside all the tweaks i want the new twak ''unlock weather animation fron sense 4''\
Thank you.
Vasilis.
Click to expand...
Click to collapse
Βασίλη η Viper 6.0.1 δουλεύει άψογα μόνο το ράδιο δεν δουλεύει
What's the latest firmware version for hboot 1.52 and how do I upgrade it ?