Note 4 Dead after Update won't power on - T-Mobile Galaxy Note 4 Q&A, Help & Troubleshooting

I recently did the latest update to my T-mobile Note 4 upon updating the phone, the phone was in a constant boot loop and finally installed the update to the device. Upon installing the new software update to the phone it began the reboot loop and eventually started up I received one text message and it began to loop again and now it will not turn on. None of the button combinations will turn the phone on it is not accepting a charge either. I put the battery in another note 4 and it works fine and shows 79 percent of the battery is charged. What can be done to get the phone to wake up out of it's current state most of the pictures were salvaged with drop box, but it did not update from a family funeral yesterday with several pictures and those are important. Has anyone had this issue before and what was done to fix it?

nigafied45 said:
I recently did the latest update to my T-mobile Note 4 upon updating the phone, the phone was in a constant boot loop and finally installed the update to the device. Upon installing the new software update to the phone it began the reboot loop and eventually started up I received one text message and it began to loop again and now it will not turn on. None of the button combinations will turn the phone on it is not accepting a charge either. I put the battery in another note 4 and it works fine and shows 79 percent of the battery is charged. What can be done to get the phone to wake up out of it's current state most of the pictures were salvaged with drop box, but it did not update from a family funeral yesterday with several pictures and those are important. Has anyone had this issue before and what was done to fix it?
Click to expand...
Click to collapse
A few questions I would ask to be able to help would be:
Which baseband/bootloader/version were you on and which upgrade was your Note IV attempting to install?
Are you rooted or stock?
When you say that it bootlooped a bunch and then "finally installed the update", was that with no user interaction at all? seems odd to me for a bootloop to repeat and then randomly work.
If I were you and after pulling battery for 30 seconds doesnt work and holding down home+power+volume up, then try plugging it into a USB port on your computer and see if it recognizes it. Make sure your PC has latest samsung usb drivers.

Modzilla44 said:
A few questions I would ask to be able to help would be:
Which baseband/bootloader/version were you on and which upgrade was your Note IV attempting to install?
Are you rooted or stock?
When you say that it bootlooped a bunch and then "finally installed the update", was that with no user interaction at all? seems odd to me for a bootloop to repeat and then randomly work.
If I were you and after pulling battery for 30 seconds doesnt work and holding down home+power+volume up, then try plugging it into a USB port on your computer and see if it recognizes it. Make sure your PC has latest samsung usb drivers.
Click to expand...
Click to collapse
All stock the last update performed was for that security hole android had on the android 5.1.1. What I mean is that during the install the phone kept restarting and restarting and then it installed the updates and went to the home screen. When it reached the home screen it showed me one text and I went on charging the phone thinking it was normal woke up this morning the phone was off yet the battery still has 79 percent when placed in another note 4 phone. I tried plugging into the pc the phone isn't recognized because it does not turned on it says unrecognizable usb device and I installed the latest samsung drivers as well I've tried those button combinations as well as pulling the battery. I'm wondering if the update corrupted something prohibiting it from booting it doesn't take a charge either when connected to the wall it's almost like the phone is in a stale state.

nigafied45 said:
All stock the last update performed was for that security hole android had on the android 5.1.1. What I mean is that during the install the phone kept restarting and restarting and then it installed the updates and went to the home screen. When it reached the home screen it showed me one text and I went on charging the phone thinking it was normal woke up this morning the phone was off yet the battery still has 79 percent when placed in another note 4 phone. I tried plugging into the pc the phone isn't recognized because it does not turned on it says unrecognizable usb device and I installed the latest samsung drivers as well I've tried those button combinations as well as pulling the battery. I'm wondering if the update corrupted something prohibiting it from booting it doesn't take a charge either when connected to the wall it's almost like the phone is in a stale state.
Click to expand...
Click to collapse
Have you tried installing Kies on your PC to see if it can detect it? I believe it has a couple special options for detecting and repairing corrupted stock updates. http://www.samsung.com/us/support/owners/app/kies

Modzilla44 said:
Have you tried installing Kies on your PC to see if it can detect it? I believe it has a couple special options for detecting and repairing corrupted stock updates. http://www.samsung.com/us/support/owners/app/kies
Click to expand...
Click to collapse
I haven't tried kies I tried smart switch though and the phone wasn't detected I'll try kies as well. I'll be back with an update appreciate the help.

Kies didn't work because the phone can't be recognize by the program the computer makes a noise knowing when the phone is connected but the screen on phone doesn't turn on I can't even get it to boot up or accept a charge and the battery is nearly full given that I put it in another phone to check. I've tried even starting the phone up with no battery using direct charger as primary source but it didn't work. I'm not sure how the update fried my phone, but I'm going to be losing some important pics drop box didn't sync yesterday during a family funeral.

That is just really ****ty luck. They say there is always a small chance that flashing anything can cause epic partition disasters. If kies is detecting it but saying it's unable to connect then I'd say the phone is toast. You might be able to get Odin to recognize it and reflash the entire ROM, but that would obviously destroy any data you had on the device previously. Might look into doing an adb pull or backup but being realistic with expectations, I'd say the chances of them working considering what you've done is minimal.
Since you're on stock anyways I'd just go warranty exchange it if you can. Not worth dicking around with Odin if you are stock.
Sorry I couldn't be more help but I would take this opportunity to seriously get yourself a cloud based automatic backup so you don't have to worry about these things anymore. I had something similar happen to me and I lost all my data and now it all syncs to my ex_sdcard and Dropbox haha..can never be too sure
Sent from my SM-N910T using Tapatalk

Yeah I never flashed anything it was an over the air update basically that went bad. The last time I flashed software using odin I didn't lose any of my information it stayed on the internal memory and was there still. It truly is sad they roll out an update over air and it bricks your phone makes no sense.

Modzilla44 said:
A few questions I would ask to be able to help would be:
Which baseband/bootloader/version were you on and which upgrade was your Note IV attempting to install?
Are you rooted or stock?
When you say that it bootlooped a bunch and then "finally installed the update", was that with no user interaction at all? seems odd to me for a bootloop to repeat and then randomly work.
If I were you and after pulling battery for 30 seconds doesnt work and holding down home+power+volume up, then try plugging it into a USB port on your computer and see if it recognizes it. Make sure your PC has latest samsung usb drivers.
Click to expand...
Click to collapse
I have gotten the phone to turn on randomly it turned on and is now regularly turning on however it is still in a bootloop will not allow me to enter recovery I can enter custom OS have tried to root but it flashes and does not stick with phone for the custom recovery I'm not sure what I can do now that the phone turns on any suggestions?

When trying to root or enter recovery I get recovery is not Seandroid enforcing set warranty bit recovery and boot loop

Have you tried connecting it to kies again to see if it will repair the corrupted flash? If not, Google your bootloader and Odin flash the full stock firmware
Sent from my SM-N910T using Tapatalk

Modzilla44 said:
Have you tried connecting it to kies again to see if it will repair the corrupted flash? If not, Google your bootloader and Odin flash the full stock firmware
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
I have a t-mobile 910T note 4. I will try kies again not sure what my bootloader is or was I'm just trying to do what ever i can to preserve the data on phone will flashing stock again delete the internal I know with root with my other note 4 it didn't. This phone was never rooted the over the air update boot looped the phone

I would definitely try using kies or even adb from command to see if you can pull the data from it. Flashing a full firmware will wipe all data Yeah so I'd use that as a last resort
Sent from my SM-N910T using Tapatalk

Not to sound stupid what's an adb command

Modzilla44 said:
Have you tried connecting it to kies again to see if it will repair the corrupted flash? If not, Google your bootloader and Odin flash the full stock firmware
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
On this forum I have found just the bootloader available to down load if I download the full rom is it going to wipe the internal memory here is the link I'm referring to http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
I think I might have it figured out just need clarity on if flashing just the bootloader will do the trick I also got a set warranty kernel on boot last time as well.

If it were me I'd install the following:
Twrp custom recovery : https://www.androidfilehost.com/?fid=24052804347792887
Make sure you have latest drivers from Samsung. Flash twrp and see if you can boot into recovery and then either wipe cache or flash a bootloader zip from there. At the very least you could pull files from it once in recovery
Sent from my SM-N910T using Tapatalk
---------- Post added at 12:16 AM ---------- Previous post was at 12:10 AM ----------
If that doesn't work then I'd read this guide on adb setup and commands. It seems daunting at first but incredibly useful
http://forum.xda-developers.com/showthread.php?t=2225405
Sorry I'm a bit short on explanation I'm just short on time. If you need anything more specific in terms of clarification don't hesitate to ask.
Sent from my SM-N910T using Tapatalk

I would visit your local tmobile store and have them look at it. Besides smartswitch they have a program they can run and possibly restore your phone before it gets totally borked up.
This could help justify rma with Samsung.
Pp.

My phone was dead. I used the original note 4 cable and it worked like a charme was able to odin to stock (new firmware) and root. I dont see any way out other than loosing all data
Sent from my SM-N910T using Tapatalk

This is what I see when I flash the root or recovery every single time. I know if I can get the recovery on the phone I can get the pictures on to my pc because I had a phone that was android locked that I did myself and rooted recovery and was able to get the pc to see and transfer files to pc so why is it showing this image am I doing something wrong?

PanchoPlanet said:
I would visit your local tmobile store and have them look at it. Besides smartswitch they have a program they can run and possibly restore your phone before it gets totally borked up.
This could help justify rma with Samsung.
Pp.
Click to expand...
Click to collapse
They don't have that machine any more I use to work at t mobile that machine was a joke by the way I'll be able to get a replacement it's the funeral pictured that are most important to me they didn't sync to drop box for some reason and that's my main reason for trying to get the phone working. I've flashed everything I've been told to flash I still get the boot loop and the stupid se android reinforcing set recovery or set kernel etc currently it's recovery if I try to initiate recovery via the buttons it just boot loops

Related

[Q] Help! I Think I bricked my phone!!

for some reason i went to reboot my phone and it wontboot just hangs.. can boot to recovery and do a factory reset.. but still wont boot.
cannot boot to download mode with vol up keypad and power.. just continually reboots to the samsung white message and starts over.. any suggestions or should i just send it back?
got it working whey.. it wouldnt boot up to recovery.. got it to goto recovery during a boot loop by plugging in usb.. i think.. the only think i can think is that earlier today i replace the mms.apk and mms.odex with an earlier version from jf3.. didnt like that at all. but i didnt reboot till later.. this was to try and work around the messaging bug in jg1.. .since i had to reinstall i am happy to report as previously reported that the the csc from jff messaging works fine the the modem and core files from jg1.. (that is what i reflashed it too..)
[Q] Help! Think I bricked my phone!!
Flashed to WJG1
Started Odin,it started to do its thing.halfway through I got the USB disconnect sound.Odin stopped , I now have a green screen
And u cant boot it to either restore or download mode?
Sent from my GT-I9000 using XDA App
Remove battery! put it in again!
Start in download mode! (volume down+home+power)
and reflash!
Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.
saldawop said:
Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.
Click to expand...
Click to collapse
Did you use the other 512.pit file? and did you check re-partition?
Make some screenshots!
Yes to both
Did you install the latest version of Kies? (just for the driver?)
And did you close kies before you started flashing?
I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?
saldawop said:
I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?
Click to expand...
Click to collapse
As far as i know you can flash whatever firmware you would like! the best option right now is to use JG5!
Correct me if i'm wrong!
Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.
saldawop said:
Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.
Click to expand...
Click to collapse
Yes i am on WJG5! you can root it and you can use the lagfix!
I am currently using it without the lagfix and it works great! no blackscreens whatsoever!
Question! did you remove the simcard and sd card when you where flashing with odin?
It shouldn't be scanning for media all the time! don't know whats wrong!
Yes I did.
Following a tutorial which says to uninstall Market from Applications.When I go to Applications(clicking Fliter>All) and bringing up Market there is no option to delete
Here mate, have a look at some suggestions.
And some other quick - you should have run kies before the flashing, so it would install all the drivers, it might be your problem.
Maybe a moderator can pin this, ot some other inbricking topic/guide?
Link to tutorial - http://forum.xda-developers.com/showthread.php?t=725858
Yeah but I have flashed it about half a dozen times previous with no problems.
Well, I dont know what happened, but after setting up my phone pretty much as it was before I thought "I didnt do a factory reset after flashing the rom", so I did so.Rebooted,went to Market and all apps are showing
What does a factory format do??
I thought it would wipe everything off the phone?
After doing one on my newly flashed SGS, I had a look at the SD card and all the folders of games/programs were still there.
i was afraid too when i flashed with the latest firmware last week
odin did nothing, so after 10 mins i remove the usb cable and put it again
then restart computer and put the usb cable ... but the computer didn't see the phone
i turn off the phone, it turn on automaticaly with a nice logo with a phone and a computer... like the phone wana tell me : "You dumb idiot, you bricked me"
I was near to be killed (its my wifes mobile, not mine) but then i tried to return into download mode and it worked and lucky the computer saw the phone
ps: i did this night, when my wife was asleep, so she didn't noticed, but if she noticed or if it was bricked ... well i guess she would kicked my ass and i would be 500box poorer

Stuck after bad rom flash, odin wont recognize

So heres the synopsis on what my issue is:
first of all-
phone: Samsung Captivate build 1010
current OS: (botched install of Darky 8)
problem: no recovery menu capability, stuck in reboot loop (will not go past ATT Logo), can go into download mode but odin does not see the phone
I botched a Darky 8 install. I attempted to install the rom to my captivate via rom manager but to no avail. I then decided to give the install a try via clockwork and had luck. the rom was not to my liking so I went to mount the internal sd and proceeded to delete all files internally to make a fresh odin install possible (as I always do). It was at the time of restarting my phone that I realized the rom I install was accidently the I9000 rom on my captivate, thus forth being a possible source of my issue. Currently I have a phone that is stuck in a reboot loop any time I plug it into a power source, or attempt to power it on. While in said loop the phone will not go past the ATT logo, and as it cycles, at the I9000 screen a robot voice pops up saying restore system. Ive attempted to reflash back to stock with the stock captivate odin3 OCD, but I am having no luck with the phone being recognized by odin (run as admin). I am currently running Mac OSX 10.6 with windows vista on Virtual Box 4.0, and have had luck previously with flashing the phone back to stock after I decided to try new versions of cognition. Currently my phone can only go into download mode and not recovery due to the boot loop. please help asap, this my only means of communication with my family on the other side of the states
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
CB650 Wolf said:
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
Click to expand...
Click to collapse
going to try, redoing my virtual box in hopes that it was something stupid, and also trying the other usb port on my macbook.
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
butchatbg said:
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
s0n1cm0nk3y said:
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
Click to expand...
Click to collapse
Try using ADB..
Edit...misread
rickysa2000 said:
Try using ADB..
Click to expand...
Click to collapse
sadly I wished that work, I tried using adb reboot recovery, and in the attempt, the phone was not able to be detected. Should this be done in hopes to catch it at the right time in the boot loop or in download mode. Ive tried both.
So can you still get into Download mode? If so I would suggest finding another computer to use. For some reason, last week, my PC that I have been using to flash for months decided not to recognize my phone in download mode.
So I switched to my laptop, loaded the ROM. I tried reinstalling drivers and all kinds of stuff but nothing worked. I backed up my PC and re-imaged it and it's working again.
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
avgjoegeek said:
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
Click to expand...
Click to collapse
Odd I was told your perfectly fine to do so, and then from there do an odin flash. Ive done it before, but oddly enough I think what screwed me was because I did it during while in the rom, vs while in 2.1. I just wanted to try to get a clean slate. doing the master clear code from samsung never really deletes the left overs from say clockwork and such on my internal sd.
problem was the virtual machine, plugged it into a friends computer and all was done within a couple of mins. leave it to emulation falling short :/

Bet this can't be fixed

No firmware and USB problem
I have a large problem, my wifes galaxy s won't go by the first screen (says GALAXY S GT-I9000)
So i thought i'd fix it using odin using the 3 button combo. But that isn't working anymore.
Luckily i have a usb jig which gets me to the download mode ...... but !
When i connect the pc cable (tried 2 OE samsung ones) i get device not recognized so i can't use odin to fix it.
What can i do, or do i have to send it to a repair centre to be resurrected ?
I have searched and searched but not found any topics with the same issues i have on her phone.
Need a bit more info i.e were you flashing the phone??if so which rom?
Then phone was playing up so i flashed darkys 10.4.2.
However the usb connection wouldn't work so i flashed it to standard JVT
using mobile odin.
Then i rooted it and went to go into recovery mode and it wouldn't turn on.
I tried to help the gentleman , but no luck . From what he told me , phone turns on after battery insertion , and It is not recognised by usb => so odin not usable .
If you can get to download mode but the phone isn't recognized by your computer then i'd say it's a driver issue. Install your phone's drivers again. To do that, just installing kies is enough BUT be sure to open task manager in windows and kill any process that has kies in it's name before opening odin.
If that still isn't flying i'd try using different USB ports and even with a different computer.
Extra advice:
- try not to flash bootloaders for now. That means picking a rom that has no bootloaders included but matches your phone's current bootloader. If you were using gingerbread flash a gingerbread rom, if you were using froyo, flash a froyo rom.
phone not starting up past first screen (GALAXY S GT-I9000 in white on black screen), phone not recognized neither by pc nor laptop ( usb drivers installed ) , phone turns on after battery insertion without pressing anything.
This manual is from a German board
Take the battery out, then hold the 3 keys combo for download and put the battery back on. Now you should start the download mode.
If not, then try it with a jig.
Good luck!
GOT A JIG. WORKS FINE.
But pc wont recognize it !!
Have you double checked that you have the right drivers installed? I know you have to use the Nexus S drivers for CM9, not sure about Darky's ROM.
Drivers
Download drivers 64 bit | 32 bit from here and install.
It is NOT the drivers as my other galaxy s connects fine every time.
Drivers have been removed and installed repeatedly.
I would suggest a different computer, maybe a different cable. I have this same issue with my infuse, hope you get this resolved.
Sent from my Desire HD using XDA App
Already tried that as well
You could try Adam outler's unbrickable mod.
Pasted from other thread:
I just wrote a wall of text b4 and my browser crashed GG
Well, here we go again, i will only tell what I did/the process
I did a nandroidbackup, then i wiped all data (data+cache+dalvik), installed CyanogenMod 9 (Build 16), it rebooted automaticly, so I entered recovery again, installed Google Apps from there, wiped data and cache (no dalvik), rebooted.
Ended up looping at the Samsung screen (not animation), and I couldnt do the 3-button-combo, so the NANDroid backup is useless.
I can enter the download thing, but i dont even know what it does.
Tried plugging it in the charger (after letting it dry out during the night), and only the loop thing appears. Cant do anything.
I see that theres something called odin (Since my download thing is working (VolDown+Home+Power) if its that you mean.
If its possible to fix my phones state, please tell me how, since I startedrooting, flashing and stuff yesterday (Gotta start at some point) and followed HDTechVideos tut (On his website)
woolf clubs said:
You could try Adam outler's unbrickable mod.
Click to expand...
Click to collapse
I have nowhere near enough ability for that. Pity though.
Your problem is most likely the USB port. Maybe cleaning it might help. It happened to me for a few months then when I got the S2 I stopped using it. Began to use it as my home 3g wifi modem and kept it on charge the whole time. A few weeks later tried connecting it to the computer and it worked first go. Ever since it has worked perferctly. I suspect the problem possibly started by a rain drop getting into the port.
Mind you, even when it wasn't being recognised by the PC, I would constantly connect, remove, reconnect, reboot PC and phone etc and it would sometimes get recognised. Other times it wouldn't connect but Odin still recognised it.
Sounds silly but try leaving it on charge as I did and maybe, just maybe you'll be lucky like I was.
Sent from my GT-I9100T
Well as of today it is away to the O2 repair centre.
Its under warranty (unless the find out it was rooted etc) so fingers crossed.
Well had a text back today to say my phone has been despatched, so here is hoping that its fixed.
It came back from the repair centre yesterday with a note saying a part had been replaced,
no costs for me, yippeeeeeeee.

[Q] Completely dead N7000. Hardbrick I think.

Howdy there.
First off, this is not "just another bricked Note thread".
I got this thing from a friend who did not have a clue what he did with it, but he told me he tried to "root it or something" He didn't have any files left, or any memory what he used.
I have for weeks tried every single trick in the book, followed every tutorial, and it shows no sign of coming to life any time soon.
When I got it, it just got stuck on the Samsung flash screen. I couldn't get into any sort of recovery, but I got into download mode, so I tried reflashing the stock firmware with ODIN, but it got stuck on NAND WRITE START for 2 hours, and then failed. All Kies processes were killed, I double checked.
After that, it only shows the "Firmware update failed, start emergency recovery mode in kies"
Kies does not support initialization for N7000, doubted it would have worked anyways.
After this, I went on to read about the brick bug for N7000
Since then I have tried repartitioning the device with all kinds of pit files, I have tried installing about 20 different firmwares, I have tried installing just a kernel, both stock and others, and NOTHING works.
Some pit files get stuck in DO NOT TURN OFF DEVICE for 6-24 hours, until I have disconnected or battery has run out, and some fail by themselves after 20 minutes.
Firmwares get stuck at NAND WRITE START, and fail after about an hour
Kernels fill up the bar with the green dots showing it's doing something but as soon as the log says "NAND Write Start" it gets stuck.
Is there ANYTHING still worth testing, before throwing it in the well? I will not go to a service center and pay to fix a spare phone that will lay in a box until I MIGHT need it some day.
It doesn't matter if my storage space goes down to only 500mb space with some sort of repartitioning, nothing matters. I just want it to run.
I do not have any recovery, and I haven't successfully installed any,
Basically the only thing I can do, is get to Download mode, and the only program so far finding it is ODIN.
I am very thankful for any help, and don't hesitate checking if I forgot something very basic, I might just as well have forgot something very important, but I feel I have tried everything.
Thank you!
-Jimi
It is exactly this: just another bricked Note thread.
ThaiDai said:
It is exactly this: just another bricked Note thread.
Click to expand...
Click to collapse
Well, okay then. Thanks for clearing that up.
I just figured that it's something worse since NOTHING works, hence the "not just another" meaning "not just the same as the others". Atleast I thought it meant that. Perhaps my English isn't so good. Oh well.
I have read dozens of other threads about this where people have been able to get into recovery mode, repartition, or flash a new kernel, or at least SOMETHING, but mine just blocks everything.
-Jimi
Okay then, let's simplify the question/request.
Is there ANY way at all to scan or/and repartition my emmc?
WITHOUT a recovery.
WITHOUT it accepting anything through ODIN, not even the standard pit file, or any of the custom ones I have tried from another thread.
WITHOUT adb.
I can only get to Download Mode.
Heimdall seemed to understand my phone a bit, but couldn't flash anything.
Kernels got stuck at 100%
Factoryfs got stuck at 4%
Recovery got an error "finishing the packet" or something.
Could I use Heimdall to scan or repartition my emmc maybe?
If you are unable to Odin flash a recovery or stock rom then there's no other way. If you found other methods but is still unsuccessful then your phone is dead anyways.
I have seen the NAND write stuck error sometimes goes away on a different PC. If the memory is not already broken but worth a try.. Also use original USB cable, main PC usb port, odin 1.85.
nokiamodeln91 said:
I have seen the NAND write stuck error sometimes goes away on a different PC. If the memory is not already broken but worth a try.. Also use original USB cable, main PC usb port, odin 1.85.
Click to expand...
Click to collapse
Nah, I think the memory is broken.
I have only tested with odin 1.75, but on 3 different PCs
My laptop with Win 8.1
My old computer with XP
And my work computer with Win 7 home
Still, I do not want to give up!
In my frustration I started to flash everything and anything that just had a N7000 tag on it, and somehow somewhere something happened.
I do not have the "firmware failed, use kies recovery" message anymore.
I am instead getting the Samsung splash screen, but it freezes there, I can't do anything.
And also, if my device is off, I can charge it! The battery shows up, but then it freezes with the circle in it before it fills with green to show how much it is charged, but now it atleast accepts charge. Before it didn't.
But I still wonder if I could not scan and repartition my phone with anything else than recovery mode? Perhaps I could flash a repartitioned custom Pit file with Odin if I could just scan it somehow?
I got a similar problem with my uncle's Note. It was working fine all these years, until last month when I rooted it to upgrade it to 5.1. The phone worked for over a month post upgrading.
However, now, when I power it up, nothing happens, absolutely nothing. If I connect it to a power source, the offline battery charging symbol comes up saying 100%. Recovery mode doesnot work, though I can go in Download mode.
I tried a couple of stock ROM images through ODIN. They were flashed successfully, but the issue persists. Looks like another dead Note.
froyoguy said:
I got a similar problem with my uncle's Note. It was working fine all these years, until last month when I rooted it to upgrade it to 5.1. The phone worked for over a month post upgrading.
However, now, when I power it up, nothing happens, absolutely nothing. If I connect it to a power source, the offline battery charging symbol comes up saying 100%. Recovery mode doesnot work, though I can go in Download mode.
I tried a couple of stock ROM images through ODIN. They were flashed successfully, but the issue persists. Looks like another dead Note.
Click to expand...
Click to collapse
Which rom was this?
AutumQueen92 said:
Which rom was this?
Click to expand...
Click to collapse
Thanks for your reply. Couldn't check it until last night. I was running NightOwl when this happened. Last night, I thought something and flashed the same Philz recovery through Odin and some how it worked.
I have started realizing that it is a hardware issue, since the device does not start without being connected to a power source. 1 out of 20 tries take me into recovery (of course while the device is connected to the charger, or else the screen is always black).
However, the recovery doesn't stay too long. I tried flashing a newer version of NightOwl, but while the recovery is still opening the package, the phone restarts .
One weird thing is that the phone doesn't starts without being connected to the PC or the charger. But when connected, within seconds, the offline charging screen says 100%, which is making me believe something is wrong with the hardware.
Part of the "hardware" is your battery...

Note 9 bootloop out of nowhere!!

So let me give you a little background first. I was at my brother's house recording him dunk in superslowmo. All of a sudden, my phone freezes. After about 2-5 mins I decide To hold power +volume down and the phone goes black and goes to the "Samsung Galaxy note 9 secured by knox" screen and does a infinite reboot to that screen. The phone will not go into recovery mode BUT will go into Download Mode. I tried letting the phone completely drain and then trying it with no success.
I do have AT&T protection on my device but the only thing they will do is replace it which I'm trying to avoid being that I have pictures I want to extract from the phone.
So to my question(s)
1) if I flash latest version of firmware from sammombile will I lose my pictures? (Trying to avoid loss of pics)
2) can I use a MacBook to do the reflashing or does it have to be windows?
Please and thx to all that respond!!!
Once in download mode hold volume down and power to see if phone boots up. If you reflash with Odin use home_csc so it does not wipe your data. If you do get to recovery do not do a wipe, everything you have saved to phone storage will be gone. See if you can get to device storage by connecting to computer once your in download mode or recovery. If so just move all important files to computer then you can use Odin to flash firmware.
Sent from my SM-N975U using Tapatalk
Bicka0701 said:
So let me give you a little background first. I was at my brother's house recording him dunk in superslowmo. All of a sudden, my phone freezes. After about 2-5 mins I decide To hold power +volume down and the phone goes black and goes to the "Samsung Galaxy note 9 secured by knox" screen and does a infinite reboot to that screen. The phone will not go into recovery mode BUT will go into Download Mode. I tried letting the phone completely drain and then trying it with no success.
I do have AT&T protection on my device but the only thing they will do is replace it which I'm trying to avoid being that I have pictures I want to extract from the phone.
So to my question(s)
1) if I flash latest version of firmware from sammombile will I lose my pictures? (Trying to avoid loss of pics)
2) can I use a MacBook to do the reflashing or does it have to be windows?
Please and thx to all that respond!!!
Click to expand...
Click to collapse
1) while flashing in Odin, the CSC file determines if your phones data is erased or not during the flash. In order to retain personal data, flash HOME_CSC..
2) you can use Jodin to flash on a Mac https://forum.xda-developers.com/devdb/project/dl/?id=20803
Bober_is_a_troll said:
1) while flashing in Odin, the CSC file determines if your phones data is erased or not during the flash. In order to retain personal data, flash HOME_CSC..
2) you can use Jodin to flash on a Mac https://forum.xda-developers.com/devdb/project/dl/?id=20803
Click to expand...
Click to collapse
Okay I ditched the macbook idea and I have my aunt's computer in from of me.
When installing the firmware.. Am I going for the latest USA version which is from like last week... Or do I do the ATT firmware from Nov 2018 and do the OTA update?
Bicka0701 said:
Okay I ditched the macbook idea and I have my aunt's computer in from of me.
When installing the firmware.. Am I going for the latest USA version which is from like last week... Or do I do the ATT firmware from Nov 2018 and do the OTA update?
Click to expand...
Click to collapse
We're you already on the latest firmware? If you are then just flash the latest and use home_csc
Bober_is_a_troll said:
We're you already on the latest firmware? If you are then just flash the latest and use home_csc
Click to expand...
Click to collapse
Okay now one last problem .. I connected my phone to the pc and it made a chime sound like the pc recognized but noting popping up in odin.
When I go to download the drivers, it tells me I already have them downloaded and ask if I want to dl them again anyways which I do... Then at the end of the whole process it says failed to install and I'm in dl mode on my phone
Try different port on computer
Sent from my SM-N975U using Tapatalk
butchieboy said:
Try different port on computer
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
When I did that I got this loading screen that says installing device but it hasn't moved from that "near end" of the loading screen for like 10 mins now
butchieboy said:
Once in download mode hold volume down and power to see if phone boots up. If you reflash with Odin use home_csc so it does not wipe your data. If you do get to recovery do not do a wipe, everything you have saved to phone storage will be gone. See if you can get to device storage by connecting to computer once your in download mode or recovery. If so just move all important files to computer then you can use Odin to flash firmware.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Ever seen above Images?
Try installing Smart Switch
raul6 said:
Try installing Smart Switch
Click to expand...
Click to collapse
I'm going to try that now. Just look at what version of Windows I have and it's 8.1... does that make a difference of why the drivers won't install ?
This is the error message when I try "mss installwizard for samsung usb driver for mobile phones failed "
Bicka0701 said:
I'm going to try that now. Just look at what version of Windows I have and it's 8.1... does that make a difference of why the drivers won't install ?
This is the error message when I try "mss installwizard for samsung usb driver for mobile phones failed "
Click to expand...
Click to collapse
When I was installing smart switch it told me to "disconnect my device from pc"( which it read AS A Samsung phone)
But when it's all downloaded It just says connect device again but when I do the computer makes its sound and then nothing.
If I'm in device manager and I plug in my note 9 it pops up as 'sdm845' but says there are no drivers installed.
I uninstalled the Samsung drivers (even though it says failed) and I tried again and it said fail to install again

			
				
Okay if anyone Is still reading this.. If I switch up and use my Father's Macbook instead, does anyone know the necessary steps to continue on with the process? And keep in mind the state of my phone is in a boot loop and only goes to the download screen
I was just doing the whole chatting thing with a Samsung representative and they advise me to go to a place near me to do the reflashing.
but still the thing that's bothering me is that my PC isn't installing the drivers regardless.
without even thinking about my phone connected , I should be able to go on Samsung's website and download the drivers right off the website but when I do I get the "mss installwizard for samsung usb driver for mobile phones failed "
Install this drivers, reboot pc, open odin as administrator, connect phone in download mode.
http://www79.zippyshare.com/v/NJL6wZmq/file.html
Did you ever get to the bottom of this ? I seem to have a similar issue, where phone is in a continuous boot loop. It stays on powered by android screen for few secs and then restarts.
I cannot enter recovery mode, but can get into download mode. Have flashed via ODIN few times successfully, but same condition prevails.
Safe to assume MoBo is fried ?
Could be that the main storage in the motherboard is corrupted, which needs to be reformatted entirely.
dedicated2droid said:
Did you ever get to the bottom of this ? I seem to have a similar issue, where phone is in a continuous boot loop. It stays on powered by android screen for few secs and then restarts.
I cannot enter recovery mode, but can get into download mode. Have flashed via ODIN few times successfully, but same condition prevails.
Safe to assume MoBo is fried ?
Click to expand...
Click to collapse
No I never did get to the bottom of it. I ended up getting the Note 10 but I still have the Note 9 with Hopes one day someone figures it. I got pics of my son I would love to get off of there
Bicka0701 said:
No I never did get to the bottom of it. I ended up getting the Note 10 but I still have the Note 9 with Hopes one day someone figures it. I got pics of my son I would love to get off of there
Click to expand...
Click to collapse
Just a heads up, Google photos has free backups up to 15gb in full quality, or unlimited backup of 1080 for pics and videos. So at least from now-> forward a hardware issue won't ever cause you to lose pics again. You just need to open the app and setup backups.

Categories

Resources