Database Develop

[Q] Odd Download mode problem

So, to start off, the issue at hand is not download mode, I can get into that quite easily. It's that neither one click odin or regular odin won't recognize it. I've gone back to stock so many times without issue, but this particular time I tried, it froze on sbl.bin. My screen turned a greenish black, and stayed on that for about 10 minutes before I decided it was frozen and I did a battery pull. Tried it again and the exact same thing happened. Now, windows says "One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it"
I was going from icezar's Darky's 5.5 to stock when this happened. I've gone from the first i9000 2.2.1 stock rom back to stock 2.1 with no problems before. Any ideas? I've also reinstalled drivers, and I still get that error. also, my power button doesn't do squat when it's completely powered off. Only the volume up+down button combo can bring the download screen up, other than that, no go.

Ouch - You've reinstalled the drivers.
Odin doesn't see it when you have download mode and the USB plugged in.
Can you get ADB to see the device while in download mode?
You had USB Debugging turned on before things went south?
Hmm.. you could try:
Turn on ODIN
Remove the SIM, external SDCard, and battery.
Hold down both volume buttons - plug in the USB cable then jam in the battery and see if ODIN will recognize it then.
But.. if you can't get the computer to recognize your device even after re-installing the USB Drivers?
eh you might wait for a few more posts - but I think you might be fubard.

so you went into download mode, clicked start in ODIN 1 click and got hung up? nothing else happened during the process? Was the cable plugged all the way in?
Not sure how ADB would work if windows isn't recognizing it.. Do you have another PC you can connect to?

Sounds like it pooched while he was trying to Odin 1 Click back to stock and now its probably fubard as his computer won't recognize the device.
Good call on trying a different computer.
Btw - where are you downloading the USB drivers from? There are multiple sources out there and some seem to work better than others.

Thanks for the replies guys
I got them from the wiki page way back when around it was first put up... but I haven't really changed them since they were the only ones that I found worked at the time and pretty well actually, they've recognized my captivate perfectly all the time! Well, until recently. I also have kies mini installed if that means anything. I am gonna try a friend's computer and see what happens. *crosses fingers*

alex4lex said:
Thanks for the replies guys
I got them from the wiki page way back when around it was first put up... but I haven't really changed them since they were the only ones that I found worked at the time and pretty well actually, they've recognized my captivate perfectly all the time! Well, until recently. I also have kies mini installed if that means anything. I am gonna try a friend's computer and see what happens. *crosses fingers*
Click to expand...
Click to collapse
if you haven't already, try the files attached to the Odin 1 click thread (on any pc you can get your hands on )
not sure what options you have until you can get a pc to recognize the device

Yup.. the good news if you can get into Download mode on your phone - its def not bricked.
I use the Odin 1-Click USB drivers posted there and have had no issues on either my work rig Windows XP 32 bit or Windows 7 64-bit.

Epic success! Phone is back to 2.1 stock! Thanks for all the help joegeek and fisherman

Stuck after bad rom flash, odin wont recognize

So heres the synopsis on what my issue is:
first of all-
phone: Samsung Captivate build 1010
current OS: (botched install of Darky 8)
problem: no recovery menu capability, stuck in reboot loop (will not go past ATT Logo), can go into download mode but odin does not see the phone
I botched a Darky 8 install. I attempted to install the rom to my captivate via rom manager but to no avail. I then decided to give the install a try via clockwork and had luck. the rom was not to my liking so I went to mount the internal sd and proceeded to delete all files internally to make a fresh odin install possible (as I always do). It was at the time of restarting my phone that I realized the rom I install was accidently the I9000 rom on my captivate, thus forth being a possible source of my issue. Currently I have a phone that is stuck in a reboot loop any time I plug it into a power source, or attempt to power it on. While in said loop the phone will not go past the ATT logo, and as it cycles, at the I9000 screen a robot voice pops up saying restore system. Ive attempted to reflash back to stock with the stock captivate odin3 OCD, but I am having no luck with the phone being recognized by odin (run as admin). I am currently running Mac OSX 10.6 with windows vista on Virtual Box 4.0, and have had luck previously with flashing the phone back to stock after I decided to try new versions of cognition. Currently my phone can only go into download mode and not recovery due to the boot loop. please help asap, this my only means of communication with my family on the other side of the states

Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.

CB650 Wolf said:
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
Click to expand...
Click to collapse
going to try, redoing my virtual box in hopes that it was something stupid, and also trying the other usb port on my macbook.

Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App

butchatbg said:
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.

s0n1cm0nk3y said:
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
Click to expand...
Click to collapse
Try using ADB..

Edit...misread

rickysa2000 said:
Try using ADB..
Click to expand...
Click to collapse
sadly I wished that work, I tried using adb reboot recovery, and in the attempt, the phone was not able to be detected. Should this be done in hopes to catch it at the right time in the boot loop or in download mode. Ive tried both.

So can you still get into Download mode? If so I would suggest finding another computer to use. For some reason, last week, my PC that I have been using to flash for months decided not to recognize my phone in download mode.
So I switched to my laptop, loaded the ROM. I tried reinstalling drivers and all kinds of stuff but nothing worked. I backed up my PC and re-imaged it and it's working again.

Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.

avgjoegeek said:
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
Click to expand...
Click to collapse
Odd I was told your perfectly fine to do so, and then from there do an odin flash. Ive done it before, but oddly enough I think what screwed me was because I did it during while in the rom, vs while in 2.1. I just wanted to try to get a clean slate. doing the master clear code from samsung never really deletes the left overs from say clockwork and such on my internal sd.

problem was the virtual machine, plugged it into a friends computer and all was done within a couple of mins. leave it to emulation falling short :/

[Q] I Killed my Captivate

So lately i have been having a ridiculous amount of issues on my phone. RAM was constantly used up it kicked me out of programs all the time, battery sucked, itd be laggy and jumpy power button stopped working etc. so last night i decided screw it i was sick of it and i was just going to start fresh so first i just did the system reset or whatever on the phone.
Now heres the problem, after the reset i turn the phone on it boots up and goes to the tutorial, when i either skip the tutorial or finish it i get an error message saying the tutorial isnt working properly and asking to force close. so i close it and then all i get is a black screen with the clock on the top. Not of the buttons on it work and it wont do anything but pull down the menu.
ive tried the odin 1 click master clear but it and my computer wont recognize the phone along with me putting it into download mode and trying to flash to stock. Odin doesnt see it and my computer says the drivers are broken and it wont recognize the device.
I re-installed all the drivers but the same results occur. I did however manage to have my computer see it when i put it in samsung keis mode (can still choose that from the drop down menu when i plug it in) however i dont know if that will help anything.
So any and all help will be greatly welcomed as i now am without a phone and need it very soon. Thanks

Delldorado said:
So lately i have been having a ridiculous amount of issues on my phone. RAM was constantly used up it kicked me out of programs all the time, battery sucked, itd be laggy and jumpy power button stopped working etc. so last night i decided screw it i was sick of it and i was just going to start fresh so first i just did the system reset or whatever on the phone.
Now heres the problem, after the reset i turn the phone on it boots up and goes to the tutorial, when i either skip the tutorial or finish it i get an error message saying the tutorial isnt working properly and asking to force close. so i close it and then all i get is a black screen with the clock on the top. Not of the buttons on it work and it wont do anything but pull down the menu.
ive tried the odin 1 click master clear but it and my computer wont recognize the phone along with me putting it into download mode and trying to flash to stock. Odin doesnt see it and my computer says the drivers are broken and it wont recognize the device.
I re-installed all the drivers but the same results occur. I did however manage to have my computer see it when i put it in samsung keis mode (can still choose that from the drop down menu when i plug it in) however i dont know if that will help anything.
So any and all help will be greatly welcomed as i now am without a phone and need it very soon. Thanks
Click to expand...
Click to collapse
If Odin isn't being friendly to your phone, try using Heimdall. You can get all the same things you need from Odin, but it's a different set of drivers and a different program, which might solve your issues.
If you need one, here's a Heimdall One-click to stock Froyo that AdamOutler made. It's really easy to use - just download it, let it install, and click flash.

alright ill try it and see how it goes thanks a lot

no luck. Heimdall doesnt recognize it connected and my computer still says it wont recognize it so im guessing thats the main issue first...

Delldorado said:
no luck. Heimdall doesnt recognize it connected and my computer still says it wont recognize it so im guessing thats the main issue first...
Click to expand...
Click to collapse
If you haven't already, try turning your phone and computer off. Then reboot the computer and let it settle. Once it's all set up, move your USB cable to a port at the back of the computer (or somewhere else on the computer if it's a laptop).
Once you've done that, start up Heimdall. Once it's up and settled, start up your phone in download mode, then hook up the phone.

both have been restarted a couple times but ill try that again. i grabbed a different usb cable as well. this time it allowed heimdall to recognize the device at first but when i started it said no drivers and it i followed the instructions it said after however the options heimdall said werent available. im confused why it would so no drivers as i just reinstalled them and when i plugged the phone in for heimdall it said drivers installed.
but no at the end of trying a couple times the device is back to unrecognized and heimdall cant see it

Delldorado said:
both have been restarted a couple times but ill try that again. i grabbed a different usb cable as well. this time it allowed heimdall to recognize the device at first but when i started it said no drivers and it i followed the instructions it said after however the options heimdall said werent available. im confused why it would so no drivers as i just reinstalled them and when i plugged the phone in for heimdall it said drivers installed.
but no at the end of trying a couple times the device is back to unrecognized and heimdall cant see it
Click to expand...
Click to collapse
Heimdall uses a different set of drivers (libusb) instead of the ones that samsung provides. I would suggest that you go ahead and uninstall the Heimdall drivers as well as the samsung drivers, reboot the computer, and run Heimdall again. Let it finish installing the drivers and be ready, then reboot one more time and try again.

eventually got it working and got it back to stock 2.2 however my 3g isnt working and when i try to run the update on the phone to gingerbread it wont connect to att. i thought maybe i could just flash up to gingerbread but when i put it in download mode and connect it odin still doesnt recognize it and this was after rebooting both

Delldorado said:
eventually got it working and got it back to stock 2.2 however my 3g isnt working and when i try to run the update on the phone to gingerbread it wont connect to att. i thought maybe i could just flash up to gingerbread but when i put it in download mode and connect it odin still doesnt recognize it and this was after rebooting both
Click to expand...
Click to collapse
If you were able to get it to work with Heimdall, and you're wanting to go to stock GB, I would suggest using Adam's UCKH3 Heimdall One-click. This will flash stock AT&T Gingerbread (well.. technically that doesn't exist yet, but..) and the i897 Gingerbread bootloaders at the same time.
Just make sure you have all your important stuff backed up to something that isn't your phone before you do it, and that you have a good connection between your computer and phone.

well that one worked so thanks but still no 3g or any data connection

Delldorado said:
well that one worked so thanks but still no 3g or any data connection
Click to expand...
Click to collapse
Just to check, make sure your IMEI matches the one on your phone.
To do this (assuming you're on AT&T), go to the dialer and type *#06#.
Write down that number, then open your battery case.
Take out the battery, and look on the sticker with the barcode. Above the first barcode should be your phone's IMEI. Double check to make sure those match.
If not, you may have some issues with the contents of your /efs folder.

nvm i figured it out. had to reset the access points or whatever to default. now onto to re rooting. thanks for all the help. know anything about the power button not working? i thought it mighta just been the software before but its still not working. do fixes exist? because i really hate using AnyLock to use my phone.

Delldorado said:
nvm i figured it out. had to reset the access points or whatever to default. now onto to re rooting. thanks for all the help. know anything about the power button not working? i thought it mighta just been the software before but its still not working. do fixes exist? because i really hate using AnyLock to use my phone.
Click to expand...
Click to collapse
It's possible it's dirty and needs cleaning - canned air might be a good solution.

is there a heimdall gb root? cuz as usuall all the odin ones never detect my phone

Delldorado said:
is there a heimdall gb root? cuz as usuall all the odin ones never detect my phone
Click to expand...
Click to collapse
If you're wanting one that's rooted and has CWM, check out the one in my signature. It's stock KH3 gingerbread, with CWM, rooted, but no bootloaders.

hey just wanted to thank you for helpin me out all day. that last heimdall gb helped me about immensely. ive finally been able to install some custom roms and what not successfully. i used to follow every direction super close and nothing ever worked but finally going my way so thanks a bunch ha

[Q] please someone anyone HELP my samsung captivate is soft bricked

ok to start with I am soft bricked cause i got the phone-!-computer on my screen. here is how it got bricked to start with... was updating to android 2.3 gingerbread with kies mini and the first time when finished updating my wifi would not work so i flashed the rom with odin and it was a bad version cause instantly it went to recovery mode. so I went and downloaded odin one click and flashed it back to stock android eclair and went to update to 2.2 froyo with kies mini our power blinked and now im softbricked.
ok here is what ive tried so far... 3 button combo both volumes and power tried all that. ok next i tried one click unbrick it just say failed everytime... tried AIO captivate toolbox and no avail.. went radio shack got 3 resistors 100k made a jig touched pins 4 and 5 and didnt work either.. so my questions are as follows
1. what next????
2. could i have possibly shorted out my usb port on my phone since i accidently slipped and touched a pin i should not have and AIO captivate toolbox says usb debugging isnt on.
3. is there any way to test the micro usb port on the phone to see if its working right?
any and all help would be very much appreciated.
thanks...

You're actually in an ok place. That phone--/!\--computer screen will function like download mode most times. Just try your Odin file again and you should be fine.

odin isnt recognizing it. is there a way i can make it recognize it?

I just went through this and got my phone working so no need to panic. Odin wouldnt see my phone but heimdall does. Search for the kb2 heimdall one click package and see if that helps. Since you flashed back to 2.2 youll need to use kb2. If you are on GB i897 bootloaders youll need the kk4 heimdall one click package

garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Try different ports, if nothing else. Look in the "Captivate Connection Issues" post in my signature for more items.
Also, you will probably want to stop using the AIO Toolbox. That particular piece of software is a little risky, as it flashes a known dangerous bootloader setup.

I found myself in the same boat. 3-button combo won't work, you have to remove battery and usb cable. Replace battery. Plug usb cable into the motherboard directly(rear), hold volume + and volume - then plug the usb cable into your phone. hold volume buttons until your phone boots into download mode. (assuming you have proper drivers installed)

didnt work
tried both heimdels kk2 and kk4 they both say looking for device. and also tried plugging my usb cord into every usb port on my computer still nothing.

Did your drivers unseat? for some odd reason i had to reinstall the drivers to get mine out of soft brick.

drivers
would that be the drivers for the program or the phone? and also on the kk2 and kk4 they download as jar files just like oneclick unbrick did so do i need to unzip them and move the jar file to where the exe folder is then right click and run as administrator or can i just run the jar file i downloaded?
also the the zadig driver program that comes with heindel programs will not see my phone at all when plugged in any usb port but my wife has a captivate also and when i plugged hers in zadig can see it as samsung usb composite device....

garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Pull battery, pull cable. With phone off, replace battery. Then press volume up only, and power. When screen loads, plug your USB in. If you get the system files screen, press the menu key. Then try Oden. This is what I had to do to get it to work.
Gingerbread through mini kies sucks. Your better off getting Gingerbread here:
http://forum.xda-developers.com/showthread.php?t=1300843

didnt work either
tried the just the volume up and power and plugged in usb still stuck in brick mode...

didnt work
the volume up and power then plug usb didnt work still in brick mode. should i try the usb jig with the phone off or on? when i touch pins 4 and 5 with the jig and the phone off the screen will come on but still computer- ! - phone no download mode

got it
finally got into download mode with the jig and alot of wiggling cussing fussing griping and finally praying lol.... thanks to all of you for your help not many strangers will help people anymore so thanks guys for your time i really appreciate it greatly

HELP
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?

cappy flasher said:
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
Click to expand...
Click to collapse
Unistall your phone's drivers, restart pc and reinstall them.

Drivers
So i dont know what the drivers are I had a friend set this all up for me. also i think if odin id updated that might work. It was current at the time but when a few months pass its time to update!
---------- Post added at 03:53 AM ---------- Previous post was at 03:46 AM ----------
BWolf56 said:
Unistall your phone's drivers, restart pc and reinstall them.
Click to expand...
Click to collapse
so i just updated odin and i still got nothing. so what are the drivers? ill try that.

if you dont even know what drivers are in windows, and have other people set things up for you, you should not be flashing your phone in the first place.
any time you buy a device and hook it up to windows you install??? drivers.
Google: "drivers"... a piece of software that tells an operating system how to use a device.
but it is doubtful reinstalling your drivers will help
what version of odin are you using? what are you trying to flash now? what were you flashing when it messed up?
im sorry but this may end up being an expensive lesson not to do things you dont understand. you may have to send your phone away to be jtagged or unbricked.

I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85

Not to be mean or start something, but if you work for mobile tech videos and you don't know what drivers are or you say you flash phones multiple times a day, then you should have a GREAT idea of what to do to fix this problem. Did you flash an ICS ROM and it bootlooped on the first flash, well that is supposed to happen. And Since you were on 2.3.5 then there is no DL mode combo problem. I don't know what to tell you. use your resources and Google it, or better yet let me Google that for you...

cappy flasher said:
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Click to expand...
Click to collapse
Heimdall flash!
Sent from my SAMSUNG-SGH-I897 using XDA

[Q] N7000 bricked - No USB connection possible

ok first things first, imma noob, and i did a stupid thing.
It started in last summer when i wasnt able anymore to connect the N7000 to my WIN 7 64bit (probably after an update to ICS /JB).
Well since i never needed to transfer files (64GB-sdxc) i didnt care much about it. but then in last times my phone/ram cache was full of so much unblockable bootloaded crapware so that i wanted to switch from a official 4.1.2 firmware to cyanogen. But since my USB wasnt working it wasnt that easy.
Side note: the USB-port was ****ed up before (short-circuit, screen woke up due to fake-loading). i fixed that by luck and some dark magic.. so of course i thought the connection problem were because oif the broken jack.
The day before yesterday i tried for 8 hours anything i could find to install another bootloader and flash CM (CWM / TWRP / Triangle away / minimal adb/fastboot etc.); didnt work, CWM seemed to boot up but loading failed all the time at 1/3rd of the bar at screen went black.
Yesterday my friend came over and i tried to use his USB-jack to connect my phone to my Pc, which failed. THEN i put the "broken" one from mine in his N7000; that was efficacious, everything worked fine, so the USB-jack wasnt the problem.
Later i had, out of frustration, moronism, and anger, the glorious idea to download and flash another (older) Kernel via mobile odin to install an old gingerbread stock rom on it afterwards.
That was stupid as i know now, all i can do now is enter download mode, but without USB-connectivity and the stock bootloader with the options reboot system / update from sd / wipe data / wipe cache / test redbend fota(FS) and boot, which stucks at the N7000-screen.
After i managed to **** things up i found an article which describes my (now former) USB-problem perfectly. it says to put in a special number combination on the phone to get to phoneUtil and then switch from modem mode to pda mode. i knew this screen before but i couldnt find it at the preferences on JB.
Now comes my question: What could be done to unbrick my phone? is there any help?

Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk

backstreetboy said:
Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
>Just to clarify: with USB-Jack i mean the USB-Port with the connector to the motherboard; sorry if i misused the word
I dont think so cause we used only his cable when he was here and my phone neither connected with mine nor with his USB-Jack, but both Jacks worked on his phone.
Pro-question: Is there a difference between (usual) USB-connection in booted mode and connection in download mode? i mean is download mode something like a "safe mode" where the USB doesnt need to run on 100% availabilty? Should i try to find the phone via Odin in downdload mode again by using his cable? i dont think this could work else.

Samsung galaxy note gt-n7000 bricked. Need HELP!!
The phone shows " Firmware upgrade issue encountered an issue. Please select recovery mode in Kies & try again". I cant go to recovery mode ie. vol up+home+power. THings I have tried:
1. with Kies the device isnt recognised. I have updated the driver as well.
2. with odin every thing fails... flashing "all samsung recovery.tar", flashing stock jelly bean, flashing .pit file
I have googled for days and tried many things but isnt working. Need help