[XPERIA T]
Yesterday I flashed a custom rom and since then it stucks in boot, I cant get to recovery either boot to bootloader. When I try to get it to rcovery, in the begging the blue led in on, but after a little while it reboots to sony's logo.
sorry for my bad english,
please help me,
thanks
mikewhiteoo said:
[XPERIA T]
Yesterday I flashed a custom rom and since then it stucks in boot, I cant get to recovery either boot to bootloader. When I try to get it to rcovery, in the begging the blue led in on, but after a little while it reboots to sony's logo.
sorry for my bad english,
please help me,
thanks
Click to expand...
Click to collapse
Which rom did you try to flash?
Have you unlocked the bootloader?
My guess is that you have not unlocked and tried to flash CM (Or vice versa)
If you have not unlocked, then you can repair using pccompanion.
Or if you have (and also have not) unlocked you can flash a stock ftf in flashtool
gregbradley said:
Which rom did you try to flash?
Have you unlocked the bootloader?
My guess is that you have not unlocked and tried to flash CM (Or vice versa)
If you have not unlocked, then you can repair using pccompanion.
Or if you have (and also have not) unlocked you can flash a stock ftf in flashtool
Click to expand...
Click to collapse
I have ulocked the boot loader. i had been in honami expirene v5 rom (it was working well), and then i flashed pac rom with some mods(pac rom also works great, other times).
My problem is that now i cant make anything because it can only go to mtp mode, not bootloader or fastboot mode
mikewhiteoo said:
I have ulocked the boot loader. i had been in honami expirene v5 rom (it was working well), and then i flashed pac rom with some mods(pac rom also works great, other times).
My problem is that now i cant make anything because it can only go to mtp mode, not bootloader or fastboot mode
Click to expand...
Click to collapse
Pac rom requires a custom kernel
Flash a stock ftf in flashtool (Needs flashmode, phones should always be able to get into flashmode)
Then start again
gregbradley said:
Pac rom requires a custom kernel
Flash a stock ftf in flashtool (Needs flashmode, phones should always be able to get into flashmode)
Then start again
Click to expand...
Click to collapse
Well,
I can get it to flash mode but cant flash the stock ftf. These are some lines from the flashtool:
25/056/2013 12:56:27 - INFO - Device connected in flash mode
25/059/2013 12:59:56 - INFO - Selected LT30P / 9.1.A.1.141 / PL
25/059/2013 12:59:56 - INFO - Preparing files for flashing
25/059/2013 12:59:57 - INFO - Please connect your device into flashmode.
25/059/2013 12:59:58 - INFO - Opening device for R/W
25/059/2013 12:59:58 - INFO - Start Flashing
25/059/2013 12:59:58 - INFO - Processing loader.sin
25/059/2013 12:59:58 - INFO - Checking header
25/059/2013 12:59:58 - INFO - Ending flash session
25/059/2013 12:59:58 - ERROR -
25/059/2013 12:59:58 - ERROR - Error flashing. Aborted
25/059/2013 12:59:58 - INFO - Device connected in flash mode
what can i do?
download another ftf and try that
gregbradley said:
download another ftf and try that
Click to expand...
Click to collapse
i coppied the system.sin from ftf. file and pasted to C:\Flashtool\firmwares , replacing a file with the same name
thank you for you help !!!!!!
hey guys today i unlocked bootloader and rooted with easy method and now trying to flsh custom rom but get confused because instruction as below
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (extract boot.img from an official cm 11 zip)
- fastboot reboot
in this method i got cleard how to boot in fastboot but what after that " fastboot flash boot boot.img " what this means? where will i get boot.img and where this code should be apply? please try to help me
Please use search in future
This thread is 8 below yours cuurently
http://prntscr.com/439o6e
Your answers are there
gregbradley said:
Please use search in future
This thread is 8 below yours cuurently
http://prntscr.com/439o6e
Your answers are there
Click to expand...
Click to collapse
thanks for your help but i did very dangerous i m very scared i did flash fastboot fastboot.img its done but i forgot to keep files on sd card for flash now m not able to go in system boot but can access cwm recovery any way to solve it or i did fully brick my device ?
pradatta said:
thanks for your help but i did very dangerous i m very scared i did flash fastboot fastboot.img its done but i forgot to keep files on sd card for flash now m not able to go in system boot but can access cwm recovery any way to solve it or i did fully brick my device ?
Click to expand...
Click to collapse
Yes, follow the instructions in the thread I pointed out to you. You will not be able to boot system as you have a custom kernel with a stock system.
The next instruction I gave in that thread was to boot to recovery and flash the update.zip. Do that to install the correct system for that kernel.
Also, when you unlocked the bootloader there was no need to root the phone, just install the custom kernel and a custom rom was enough..
gregbradley said:
Yes, follow the instructions in the thread I pointed out to you. You will not be able to boot system as you have a custom kernel with a stock system.
The next instruction I gave in that thread was to boot to recovery and flash the update.zip. Do that to install the correct system for that kernel.
Also, when you unlocked the bootloader there was no need to root the phone, just install the custom kernel and a custom rom was enough..
Click to expand...
Click to collapse
ok but i dont have any file on my sd card or internal storage now what can i do ?
pradatta said:
ok but i dont have any file on my sd card or internal storage now what can i do ?
Click to expand...
Click to collapse
Put it on your external SD card using a cardreader
if you cannot do that, flash a stock FTF using flashtool and then put it on your sdcard and then flash the boot.img again
gregbradley said:
Put it on your external SD card using a cardreader
if you cannot do that, flash a stock FTF using flashtool and then put it on your sdcard and then flash the boot.img again
Click to expand...
Click to collapse
i did as u say flashed ftf using flashtool but still mobile stuck on sony logo
what next ?
now in flashtools i m getting this message
please help me
16/029/2014 21:29:30 - INFO - Device connected with USB debugging off
16/029/2014 21:29:31 - INFO - For 2011 devices line, be sure you are not in MTP mode
16/029/2014 21:29:59 - INFO - Device disconnected
16/030/2014 21:30:00 - INFO - Device connected with USB debugging off
16/030/2014 21:30:00 - INFO - For 2011 devices line, be sure you are not in MTP mode
16/030/2014 21:30:07 - INFO - Device disconnected
16/030/2014 21:30:38 - INFO - Device connected with USB debugging off
16/030/2014 21:30:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
16/031/2014 21:31:37 - INFO - Device connected with USB debugging on
16/031/2014 21:31:37 - INFO - Connected device : Sony Xperia Z1
16/031/2014 21:31:38 - INFO - Installed version of busybox : BusyBox v1.20.2-jb static (2012-11-25 17:47 +0100) multi-call binary.
16/031/2014 21:31:38 - INFO - Android version : 4.4.4 / kernel version : 3.4.0cyanogenmod-g67a7120 / Build number : 14.4.A.0.108
16/031/2014 21:31:38 - INFO - Checking root access
16/031/2014 21:31:38 - INFO - Root access denied
That's not an error, you are doing it wrong.
Leave the phone turned off and disconnected
Select the FTF file to flash and only connect in flashmode when prompted to do so
gregbradley said:
That's not an error, you are doing it wrong.
Leave the phone turned off and disconnected
Select the FTF file to flash and only connect in flashmode when prompted to do so
Click to expand...
Click to collapse
Xperia Z1 - C6902 - Kernel + Baseband [14.3.A.0.757].ftf
yes i did flash this ftf all done successfully flash but after starting mobile stuck on sony logo and vibrate nothing else done what should i done now ?
pradatta said:
Xperia Z1 - C6902 - Kernel + Baseband [14.3.A.0.757].ftf
yes i did flash this ftf all done successfully flash but after starting mobile stuck on sony logo and vibrate nothing else done what should i done now ?
Click to expand...
Click to collapse
You need to flash a full FTF, look in the mega collection thread for one
The one you flashed does not have a system on it, hence you cannot boot into the system
gregbradley said:
You need to flash a full FTF, look in the mega collection thread for one
The one you flashed does not have a system on it, hence you cannot boot into the system
Click to expand...
Click to collapse
ohhh kk let me search
gregbradley said:
You need to flash a full FTF, look in the mega collection thread for one
The one you flashed does not have a system on it, hence you cannot boot into the system
Click to expand...
Click to collapse
Device connected in flash mode
16/020/2014 22:20:42 - INFO - Opening device for R/W
16/020/2014 22:20:43 - INFO - Start Flashing
16/020/2014 22:20:43 - INFO - Processing loader.sin
16/020/2014 22:20:43 - INFO - Checking header
16/020/2014 22:20:43 - ERROR - Processing of loader.sin finished with errors.
16/020/2014 22:20:43 - INFO - Ending flash session
16/020/2014 22:20:43 - ERROR -
16/020/2014 22:20:43 - ERROR - Error flashing. Aborted
what do me now ??
pradatta said:
Device connected in flash mode
16/020/2014 22:20:42 - INFO - Opening device for R/W
16/020/2014 22:20:43 - INFO - Start Flashing
16/020/2014 22:20:43 - INFO - Processing loader.sin
16/020/2014 22:20:43 - INFO - Checking header
16/020/2014 22:20:43 - ERROR - Processing of loader.sin finished with errors.
16/020/2014 22:20:43 - INFO - Ending flash session
16/020/2014 22:20:43 - ERROR -
16/020/2014 22:20:43 - ERROR - Error flashing. Aborted
what do me now ??
Click to expand...
Click to collapse
please provide me the link of the FTF you flashed.
gregbradley said:
please provide me the link of the FTF you flashed.
Click to expand...
Click to collapse
https://mega.co.nz/#!iogQlBZK!yiCA10o9pk2_TrbJ1Ntj8cyZ_PuoJG8bhFJ00ptW-4g
That should work. Try a different FTF file. Anyone will do as long as its for your device. (C6902 I presume)
Any of these three should work
http://prntscr.com/43algz
If your phone is nor c6902 download one for your phone
gregbradley said:
That should work. Try a different FTF file. Anyone will do as long as its for your device. (C6902 I presume)
Any of these three should work
http://prntscr.com/43algz
If your phone is nor c6902 download one for your phone
Click to expand...
Click to collapse
ohh gr8 i try old C6902_14.1.G.1.534_Generic IN this prerooted which was on my lappy now mobi started now what should i do next ?
can i fastboot boot.img again and flsh that rom with recovery directly ? or i should update to latest version ?
pradatta said:
ohh gr8 i try old C6902_14.1.G.1.534_Generic IN this prerooted which was on my lappy now mobi started now what should i do next ?
can i fastboot boot.img again and flsh that rom with recovery directly ? or i should update to latest version ?
Click to expand...
Click to collapse
FTF files cannot be prerooted.
What we are trying to do is get the update.zip onto your sdcard. If you do not have a card reader then we need to get you to boot into the system first so you can transfer it via USB cable.
Please flash a full FTF and boot into the system
gregbradley said:
FTF files cannot be prerooted.
What we are trying to do is get the update.zip onto your sdcard. If you do not have a card reader then we need to get you to boot into the system first so you can transfer it via USB cable.
Please flash a full FTF and boot into the system
Click to expand...
Click to collapse
yes now i m boot in system
OK, lets go back to the beginning then.
Put the update.zip on your sdcard.
Flash the boot.img again
Boot into recovery and flash the update.zip
I want to start over but I'm stuck. I'm on Linux and I`ve tried virtually everything on FlashTool
Using FlashTool I downloaded and created FTF for c6902 IN 157, and flashing fails at:
- Processing system.sin
17/036/2015 01:36:30 - INFO - Checking header
17/036/2015 01:36:31 - INFO - Flashing data
17/042/2015 01:42:48 - ERROR - Processing of system.sin finished with errors.
17/042/2015 01:42:48 - INFO - Ending flash session
17/042/2015 01:42:48 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x8009001C ";
I cant find readymade FTF anywhere, not even on mega FTF thread (most links are broken there). May be there is something wrong with the way FlashTool builds FTF, if someone can point to readymade FTF, it would be great.
What firmware version have you got, should be like 14.4.a.something
If you download CWM recovery and install a custom rom does that work?
I had some issues with FTF and flashtools, I have now installed CWM and a custom lollipop ROM.
Not bricked.
1) try with windows machine
2) different USB port
3) download a the correct ftf for your region
4) or do a recovery from PC companion
Flashed a ROM and now I'm stuck at the Sony startup screen. It won't let me go into recovery mode.
I tried to flash stock using flashtools. Only I get this message:
07/030/2015 12:30:44 - ERROR - Processing of system.sin finished with errors.
07/030/2015 12:30:44 - INFO - Flashing finished.
When I start the phone it says software updated failed.
Edit: Fixed, had to use the sony pc companion.
phantomblu said:
Flashed a ROM and now I'm stuck at the Sony startup screen. It won't let me go into recovery mode.
I tried to flash stock using flashtools. Only I get this message:
07/030/2015 12:30:44 - ERROR - Processing of system.sin finished with errors.
07/030/2015 12:30:44 - INFO - Flashing finished.
When I start the phone it says software updated failed.
Click to expand...
Click to collapse
Happened with me when I was trying to flash Android 5.0.1 update 2 (don't recall the exact version no.) using Flashtool. Faced same error and soft brick.
I just flashed 5.0.1 update 1 (again, don't recall version no.) firmware and it went smooth. Few months later when 5.1.1 was out, I updated to it straight from 5.0.1 update 1, skipping 5.0.1 update 2, using PC Companion.
I was never able to flash 5.0.1 update 2 smoothly, I guess some issue with FTF file.
Go to flashtool document and /framework, delete all files and try again
exactly the same problem when I flash a third-party 5.1.1 to official 5.1.1,"ERROR - Processing of system.sin finished with errors"
I've search for answers for two days without any result. I've tried at least 10+ different fit files on both PC and Mac, with the latest FLashTool.
When I try PCC, I was told there is no software available for my device.
It's found to be the problem of the ft file. When I tried the 23.0.1 xxx ftf ROM file, I got this problem solved. My Phone back to normal and update to official 5.1.1 through OTA. Hope this can help
I need help guys,my phone z3compact hardbricked because I formatted Ta partition and I forgot to reflash ta.img again.Is there any chance for flashing ta image via edl mode?I've found that test point,but I don't know what kind of software I must use
Try using Emma....