Database Develop

Theme is not working

Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help

Here's how I fixed it (YMMV). http://forum.xda-developers.com/p9/help/stock-rom-download-t3378806/post66873456#post66873456

I have exactly the same issue from a relock and a lock on EU version.

engineer000 said:
Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help
Click to expand...
Click to collapse
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader

itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys

engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
I have done same method but I facing update failed after flash update.app did you put then force update ?

itongx said:
I have done same method but I facing update failed after flash update.app did you put then force update ?
Click to expand...
Click to collapse
I only do a force update. Used TWRP to flash the 2nd datafile that have the theme.

Hello to all. here I have a small worries. I have installed the 1st time flight Android no / emui 5.0 not finalize on my p9, i've had the right to many crashes and losses autonomy. then I lead to the shop Huawei to put the b166 this walk ... However, since i've more themes default p9, i've more magazine. and when j'applique another theme this does not work ... if someone that's help m'its would be nice.
edit: I have been able to install the version c432b170 but nothing make no change.

engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.

ravefolk said:
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.
Click to expand...
Click to collapse
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?

engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED

ravefolk said:
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED
Click to expand...
Click to collapse
how about repairing from the PC app from huawei like a PC Suite? Flashrom from TWRP? or forced flashing the zip file. find more on the forums. I already left p9 months ako. im using op3 now

engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks

khampasith said:
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks
Click to expand...
Click to collapse
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.

engineer000 said:
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.
Click to expand...
Click to collapse
Which one should i download ? The link contain several ones

I have the same problem as well. Hope someone can share clear instruction on how to solve the problem. Thanks

itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....

masoudshojaei20 said:
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....
Click to expand...
Click to collapse
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.

lee82gx said:
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.
Click to expand...
Click to collapse
Hi....
First you choose Utility in SRK Tools and then choose "install /data/hw_init", on your phone you should accept supersu request and Done!

this is my solution ( made by me ) after trying many solutions over this forum @ other forums
just
1- delete any folder for themes u made (as hw_init or themes in root folder or at any site )
2- make folder & name it ( HWTHemes ) in internal memory
3- download this folder & put it inside (HWTHemes )
4- go to themes app and chose ** Aqua theme ** & apply it
5- no need to change any permissions
this was try on huawei y 7 2017

P8lite has no operating sys. CAN ANYONE HELLP ?

I've P8lite .. Rom be deleted by mistake while trying install SU
Now, phone has no operating system, Trying a lot to install many of Roms by twrp 3.0.2-0 ( C185B120, C185B525 And C185B560 ) more's the pity to no end with message "Skipping MD5 check: no MD5 file found" and "Could not find 'META-INF/com/google/android/update-binary' in the zip file". "Error installing zip file". "Failed".
Thanks in advance
ALE-L21 UAE

hosamzaiher said:
I've P8lite .. Rom be deleted by mistake while trying install SU
Now, phone has no operating system, Trying a lot to install many of Roms by twrp 3.0.2-0 ( C185B120, C185B525 And C185B560 ) more's the pity to no end with message "Skipping MD5 check: no MD5 file found" and "Could not find 'META-INF/com/google/android/update-binary' in the zip file". "Error installing zip file". "Failed".
Thanks in advance
ALE-L21 UAE
Click to expand...
Click to collapse
Since you have TWRP I guess you somehow deleted all the files ....
If you have a backup file (created with TWRP) you should be able to return to a previous state.
I had a problem intalling official builds, after installing a custom ROM.
You could try to install a custom ROM, like sokkoban's (very similar to the official one).

hosamzaiher said:
I've P8lite .. Rom be deleted by mistake while trying install SU
Now, phone has no operating system, Trying a lot to install many of Roms by twrp 3.0.2-0 ( C185B120, C185B525 And C185B560 ) more's the pity to no end with message "Skipping MD5 check: no MD5 file found" and "Could not find 'META-INF/com/google/android/update-binary' in the zip file". "Error installing zip file". "Failed".
Thanks in advance
ALE-L21 UAE
Click to expand...
Click to collapse
stock rom
Download the stock rom .
Copy it to sd card.
boot the device by pressing vol up ,down and power button
this will flash the stock rom
or
Re flash twrp 3.0.2
goto xda and download the rom made by hacky
and flash the zip thru twrp
i had same situation and i did this hope this will fix ?
macbeth

spirto82 said:
Since you have TWRP I guess you somehow deleted all the files ....
If you have a backup file (created with TWRP) you should be able to return to a previous state.
I had a problem intalling official builds, after installing a custom ROM.
You could try to install a custom ROM, like sokkoban's (very similar to the official one).
Click to expand...
Click to collapse
could u please send me a link 4 a custom ROM, like sokkoban's

nayeemudheen said:
stock rom
Download the stock rom .
Copy it to sd card.
boot the device by pressing vol up ,down and power button
this will flash the stock rom
or
Re flash twrp 3.0.2
goto xda and download the rom made by hacky
and flash the zip thru twrp
i had same situation and i did this hope this will fix
macbeth
Click to expand...
Click to collapse
i'll try:good:

hosamzaiher said:
could u please send me a link 4 a custom ROM, like sokkoban's
Click to expand...
Click to collapse
this is the link for sokkonban's ROM. This is for ALE L21 (Dual sim if I am not mistaken). He has made some other custom ROMS for other models. You can check them out if you want, but I suggest you use chrome with translate extension.
Good luck!!!

spirto82 said:
this is the link for sokkonban's ROM. This is for ALE L21 (Dual sim if I am not mistaken). He has made some other custom ROMS for other models. You can check them out if you want, but I suggest you use chrome with translate extension.
Good luck!!!
Click to expand...
Click to collapse
What's the meaning of the 4th requirement ..
- Installed Stock Android 6.0(B560, B564, B574) , As i had no operating system installed

hosamzaiher said:
What's the meaning of the 4th requirement ..
- Installed Stock Android 6.0(B560, B564, B574) , As i had no operating system installed
Click to expand...
Click to collapse
Can't you just flash the system.img trough fastboot?

staska_lt said:
Can't you just flash the system.img trough fastboot?
Click to expand...
Click to collapse
I don't know how, and how to boot in a fastboot if i haven't any sys. installed ?
isn't need ADB connection 2 pc ?

hosamzaiher said:
I don't know how, and how to boot in a fastboot if i haven't any sys. installed ?
isn't need ADB connection 2 pc ?
Click to expand...
Click to collapse
If I am not mistaken you can enter fastboot mode even without operating system. As for the 4th requirement, I think it's not essential since you can flash the zip file through twrp.
Sent using my Huawei P8 Lite Ale L21

spirto82 said:
If I am not mistaken you can enter fastboot mode even without operating system. As for the 4th requirement, I think it's not essential since you can flash the zip file through twrp.
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
In twrp there is an option to boot to fastboot

staska_lt said:
In twrp there is an option to boot to fastboot
Click to expand...
Click to collapse
If you want to install a custom rom you can install it through twrp. If you want to install the official build (which is very messy with emui and I do not suggest that unless you get to the service center - or anyone else can provide a working guide) you must install a custom recovery.
In my opinion, you should install a custom rom (for instance Sokkoban's) in order to have an operational phone and then find a way to install the official build.
Sent using my Huawei P8 Lite Ale L21

spirto82 said:
If I am not mistaken you can enter fastboot mode even without operating system. As for the 4th requirement, I think it's not essential since you can flash the zip file through twrp.
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
yes, i could boot in, but in Minimal ADB and Fastboot using pc it gives error "device closed"

spirto82 said:
If you want to install a custom rom you can install it through twrp. If you want to install the official build (which is very messy with emui and I do not suggest that unless you get to the service center - or anyone else can provide a working guide) you must install a custom recovery.
In my opinion, you should install a custom rom (for instance Sokkoban's) in order to have an operational phone and then find a way to install the official build.
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
when i've never succeed flashing with TWRP, i converted into CWM
it stops to flash any thing more .. ZIP or IMG files with error message "couldn't un mount sdcard" !

hosamzaiher said:
yes, i could boot in, but in Minimal ADB and Fastboot using pc it gives error "device closed"
Click to expand...
Click to collapse
Do you have your bootloader unlocked?

spirto82 said:
Do you have your bootloader unlocked?
Click to expand...
Click to collapse
yes

hosamzaiher said:
yes
Click to expand...
Click to collapse
It's weird. Try to install TWRP 3.02 again.
Then try sokkoban's ROM (the one with SU preinstalled). As long as you have the european model (C432) it should work. You should be patient, it might need more than one tries.
An other option is to try setting it up from the beginning:
go to this thead and head over to chapter 5 and install the EU dual sim files.

Also do not forget, when in fastboot mode, you use the fastboot command, not adb.

staska_lt said:
Can't you just flash the system.img trough fastboot?
Click to expand...
Click to collapse
i flashed it but screen stuck on logo !

hosamzaiher said:
i flashed it but screen stuck on logo !
Click to expand...
Click to collapse
can you acces twrp?

[TIPS] Revert Custom Rom to Official and untouched - Hard restore

Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!

hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD

macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.

Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone

In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..

Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...

You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).

Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.

What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)

Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.

I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)

Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?

islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.

Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...

islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?

Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?

islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.

Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you

Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!

Hi,
I followed your guide and it works perfectly thanks!

[request] oeminfo.img for pralx1c432

I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?

Wire1122 said:
I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?
Click to expand...
Click to collapse
In page 3 there is the new download link. It is a dual sim oeminfo but there if you read a little about it it works exactly fine on a single sim variant too.
https://forum.xda-developers.com/p8...ussion/request-pra-lx1-oeminfo-t3581091/page3
Hope it helped

Ok, but to install a single Sim fw?

Wire1122 said:
Ok, but to install a single Sim fw?
Click to expand...
Click to collapse
It's your choice. In a normal situation that should work too

Can you explain it? I must flash oeminfo through twrp and then?

Wire1122 said:
Can you explain it? I must flash oeminfo through twrp and then?
Click to expand...
Click to collapse
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.

GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
not working only bootloop

Wire112233 said:
not working only bootloop
Click to expand...
Click to collapse
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!

GedeonTaylor said:
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!
Click to expand...
Click to collapse
right but downloading b170 rom. I want b171 single sim not b170 dualsim

GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
The pra does not tolerate such flash orgies. Or did you test it before posting?

ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
chinhon, can you guides me to correcrly install b171 fw?

Wire112233 said:
chinhon, can you guides me to correcrly install b171 fw?
Click to expand...
Click to collapse
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.

ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different

surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
not working, after Huawei logo the smartphone reboot itself such after a factory reset
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170

ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Yes, I did..

surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online

ChinHon said:
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online
Click to expand...
Click to collapse
I don't understand the PRA myself..I've soft-bricked mine a couple of times and have recovered using different methods and not one foolproof way.

Can I flash stock fw with twrp?

No, unless someone has a backup for you. Take the K-Rom v. 3.3 and make it unroot. Then you have a stock rom.

Hey guys, now it's time for eRecovery!!

Go back to stock rom

Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks

aalmeida1972 said:
Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks
Click to expand...
Click to collapse
I'd suggest HurUpdater: https://forum.xda-developers.com/ho...h-official-firmware-recovery-t3769279/page111
OTAs do work with an unlocked bootloader, but not with root or custom kernels.

Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks

Try my guide (Tutorial #2, Oreo to Oreo)
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
What also should work is flashing the system.img manually via fastboot.
For this extract the system.img from the correct firmware version with Huawei Update Extractor.
Connect your phone to your PC, boot into fastboot and flash with "fastboot flash system PATH\TO\SYSTEM.IMG".
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
Note for the next time: backup your system partition via TWRP before flashing the custom rom.
Also note that a factory reset is needed, without your phone won't boot, so backup your personal data before doing it.

aalmeida1972 said:
Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks
Click to expand...
Click to collapse
Yes, it works on the P10. You can download the files with the firmware finder app. I'd recommend the newest oreo version for your customisation (e.g. B382 for C432).
But Jannomag's solution should work equally well.

Wich Jannomag´s thread?
Do you have the link, please?
Thanks

aalmeida1972 said:
Wich Jannomag´s thread?
Do you have the link, please?
Thanks
Click to expand...
Click to collapse
The fourth message in this thread

I am sorry, maybe i am just dumb but i can't find it

I followed the guide but know i am i an bootloop. I get the message "your device has failed verification and may not work properly"

It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing

aalmeida1972 said:
It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing
Click to expand...
Click to collapse
Possibly you renamed the wrong customisation file (i did it once for the 09 while I needed the 29).

Which one did you download? And did you flash manually or did you use my script?
Download my oeminfo, it's from VTR-L29C432 Version 8.0.0.380, while the version doesn't really matter.
Flash it via TWRP using "Install" and "Use Image". Flash it to oeminfo partition. Then do my update script again.

I followed the guide to do Oreo to Oreo - basically wanting to get from custom Rom (fRomFuture B370) back to stock, so I chose the same firmware version to extract. Flashed everything with the script and it went fine and it boots and works.. but
The resolution seems to be off, too low and the right side of the screen is unresponsive to touch (about 1cm )
EDIT- Rolled back to fRomFuture B370 for now - need to find a way to get back to stock, as want to move on to Openkirin ROM instead

HI, i have a vtr-l29 root, i want to unroot(version oreo), how do i do it? what do i need to flash?. thank you Alex