I just flashed Unibase Kernel on my galaxy s6 edge (SM-G925F) with Odin.
.It booted properly,
but the touch screen is not responding. I am stuck in the language selection menu of bootup.
dead.
I tried to flash stock firmware with Odin, but Odin fails on NAND write..
:crying::crying::crying::crying::crying:
Anyone knows a fix for it?
here is the link of Unibase Kernel( galaxys6root.highonandroid . com root-kernels )
Hi there,
I have same situation with you as well. I was wondering if you had any updates so far?
I have hte SM-G920F model. I just tried rooting using Odin and once it booted, the touch screen didn't work.
Related
Just tried to root my fone using CF-Root-XX_OXA_JVO-v3.2-CWM3RFS and unexpectedly it started showing the " Phone---!---Computer " screen... It won't get to the recovery mode...
But I somehow managed to get it in the download mode and got the stock rom ( I9000DDJV6_ODDJV6_DDJV4 ) finally flashed after getting stuck at factoryfs.rfs like a million of times and after excessive hair loss...
However... Now the fone starts, shows " Samsumg GT-i9000 " screen... Followed by the animation + sound screen with a big " S " glowing in the center of the screen.... it keeps glowing for about a minute and then screen goes black and the animation again starts... on and on and on....
Kindly help me the way out of it...!!!!!
Have you tried to install the stock rom again with odin?
This may repair the boot loop.
Let's get the bootloop out of the way first...
Flash a stock ROM with Odin. Make sure re-partition in Odin is checked!
This should get you out of the boot loop. To root, head over to Chainfire's thread and download the right version of his kernel for the stock firmware that you just flashed with Odin, make sure it's the right version or else you'll be bootlooping again. Example: if you flashed JVT, look for the kernel in his download section with "jvt" in its name. Flash that kernel with Odin (put it in PDA) and you should have a fully functionally and rooted phone with CWM recovery installed.
You should flash the stock rom (or at least the kernel)...and I suggest to use a newer rom than JV6 if available for your country (Newest roms for europe are JVZ, JW1, JVU...)
I use JVU (Value Pack) from sammobile.com...works fine.
For rooted kernel I prefer semaphore (2.5.0).
HELP!!! i am using galaxy mini 2 s6500 and i have rooted it b4, but aft i apply a samsung update it keeps booting me to cwm reovery!!! anyway to recover my phone? thanks!
model is s6500 not s6500d
http://www.sammobile.com/firmware/?page=3&model=GT-S6500&pcode=XSP&os=1&type=1#firmware
found this too... any1 know how to flash the .zip file?
https://hotfile.com/dl/158402018/cc8a3a9/GT-S6500D_XEO_S6500DXXLC4_S6500DOXXLD1_S6500DXXLC3.zip.html
Flash this thru Odin. (it's for eastern europe, so after flashing change your language)
hmm.... but my is not s6500d is s6500.... installing usb driver now.
hey, my phone is flashing while odin stops responding and my phone stucks there.......
Help please
Try re-flashing the CWM you flashed first when you rooted your phone . If you used mb-14's method , which I think you did because I had the same problem , this will fix it .
I hope you didn't try flashing other firmware after the problem occoured . If you did , you might need to reflash your stock firmware .
hello every one
i have tried to flash a stock rom previously with odin
but it seems i flashed an incompatible stock rom
now everytime the device restart it stuck on the loggo screen
then a black screen appears and thats it
and now when i try to flash the right one
odin stuck at SetupConnection..
how to fix this
thats all what happens
pleeeeeeeeeeeease help me
guys
i am using odin 1.48 and also i have 1.45
they both giving me the same results ... after checking of boot imag,pda,phone,and csc
after that there is file anylises , then setup connection.. but then it shows all thread complete..(sucseed0/failed 1)
i think the problem is with connection between device and odin
and i am not sure if my device running in download mod since the screen doesn't show
do i have other options to flash stock roms instead of odin?
pleeeease help me
any help would be soo appreciated
regards
BADroid-z said:
guys
i am using odin 1.48 and also i have 1.45
they both giving me the same results ... after checking of boot imag,pda,phone,and csc
after that there is file anylises , then setup connection.. but then it shows all thread complete..(sucseed0/failed 1)
i think the problem is with connection between device and odin
and i am not sure if my device running in download mod since the screen doesn't show
do i have other options to flash stock roms instead of odin?
pleeeease help me
any help would be soo appreciated
regards
Click to expand...
Click to collapse
Try odin v3 and download newest firmware from samfirmware. You extract the zip and put the file in pda. Then press Start.
How long did you wait after the black screen? Maybe it is a black screen because it has not the right bootanimation enabler. Try waiting 5 minutes after black screen.
BADroid-z said:
hello every one
i have tried to flash a stock rom previously with odin
but it seems i flashed an incompatible stock rom
now everytime the device restart it stuck on the loggo screen
then a black screen appears and thats it
and now when i try to flash the right one
odin stuck at SetupConnection..
how to fix this
thats all what happens
pleeeeeeeeeeeease help me
Click to expand...
Click to collapse
ur probably soft bricked device go to sammobile and download latest firmware in ur country then download Odin v3.07.zip [google ] and flash PDA from sammobile ... ur done
Hi,
I've searched around and did not find the answer, this is truly frustrating,
I have this Galaxy S1 phone that had Froyo 2.2 stock rom from Orange Israel.
I downloaded a random CF-ROOT, and Odin, and without checking the Baseband, I used it on the phone.
It began with a Boot Loop, so i tried a different CF-ROOT, and now it's stuck on Boot Image.
I cannot check the baseband because it doesn't boot, can't check which stock firmware I need.
what can i do?
Thanks to all helpers!!
- edit: I meant Galaxy S1 !!!
If you can get into download mode, you won't have any problems. The only thing is that you have an incompatible kernel with your firmware - just flash any stock firmware (2.2 or 2.3) to fix it.
Sent from my GT-P7510 using Tapatalk
Hi guys, I've installed on ics stock rom of the n7000 the philiz recovery+root, but I was stucked on boot. I replaced the pit and the bootloader with odin, and now I can enter only on download mode, and if I want to power on the phone I got the wierd behavior of the attached video made by me. Could anyone help me please?
https://www.youtube.com/watch?v=qzG-bhEK34M
What exactly did you replace using Odin? Try flashing a stock rom using Odin.