i flashed my phone with the chinese kdz using lgflash tool and done both adb reboot oem-unlock and the fastboot oem unlock and now its saying my bootloader is unlocked,ive checked multiple times and its saying unlocked and my usual version is 23400
(bootloader) version-bootloader: 1.0
(bootloader) version-baseband: 2.0
(bootloader) version: 0.4
(bootloader) serialno: 015d*************
(bootloader) mid: 001
(bootloader) product: X3
(bootloader) secure: no
(bootloader) unlocked: yes
(bootloader) partition-size:bootloader: 0x0000000000600000
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:recovery: 0x0000000000a00000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:boot: 0x0000000000a00000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:system:
(bootloader) partition-type:system:
(bootloader) partition-size:cache: 0x0000000018000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:userdata:
(bootloader) partition-type:userdata:
strange thing , its saying unlocked with fastboot getvar all but when try through the secret menu it still says locked - (3845#*880#)
going to reflash with kdz and see if says the same(if it properly unlocks it then it will do it again and if not then will at least know)
friartuckme said:
i flashed my phone with the chinese kdz using lgflash tool and done both adb reboot oem-unlock and the fastboot oem unlock and now its saying my bootloader is unlocked,ive checked multiple times and its saying unlocked and my usual version is 23400
(bootloader) version-bootloader: 1.0
(bootloader) version-baseband: 2.0
(bootloader) version: 0.4
(bootloader) serialno: 015d*************
(bootloader) mid: 001
(bootloader) product: X3
(bootloader) secure: no
(bootloader) unlocked: yes
(bootloader) partition-size:bootloader: 0x0000000000600000
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:recovery: 0x0000000000a00000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:boot: 0x0000000000a00000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:system:
(bootloader) partition-type:system:
(bootloader) partition-size:cache: 0x0000000018000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:userdata:
(bootloader) partition-type:userdata:
Click to expand...
Click to collapse
Your can put the link kdz?
il find the link which i got from here in xdaforum
ive reflashed it with the same kdz and it still says
(bootloader) version-bootloader: 1.0
(bootloader) version-baseband: 2.0
(bootloader) version: 0.4
(bootloader) serialno: 015d..................
(bootloader) mid: 001
(bootloader) product: X3
(bootloader) secure: no
(bootloader) unlocked: yes
(bootloader) partition-size:bootloader: 0x0000000000600000
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:recovery: 0x0000000000a00000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:boot: 0x0000000000a00000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:system:
(bootloader) partition-type:system:
(bootloader) partition-size:cache: 0x0000000018000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:userdata:
(bootloader) partition-type:userdata:
but still saying locked in the secret menu
try install CWM
will try now, heres the link to the one i used i used, ive noticed its a little smaller in size than the euro version
http://pan.baidu.com/share/link?shareid=413936&uk=674610329
I'm going back to 4.0.3, then update it to 4.1.2 Chinese.
Then prove if the bootloader is unlocked
friartuckme said:
will try now, heres the link to the one i used i used, ive noticed its a little smaller in size than the euro version
http://pan.baidu.com/share/link?shareid=413936&uk=674610329
Click to expand...
Click to collapse
no google service
timon12 said:
try install CWM
Click to expand...
Click to collapse
+1 Waiting for news, I'm on 234-000, too
ive done the first part of the cwn recovery - ive copied the files over and gone into normal recovery and the unsecured boot.img must be working as adb is there right from the start but im stuck on the next step. in the cmds i must enter it mentions /mnt/sdcard/ but they are not there
going to try put the images elsewhere and alter the cmd's accordingly
sounds like it could work!!
friartuckme said:
ive done the first part of the cwn recovery - ive copied the files over and gone into normal recovery and the unsecured boot.img must be working as adb is there right from the start but im stuck on the next step. in the cmds i must enter it mentions /mnt/sdcard/ but they are not there
going to try put the images elsewhere and alter the cmd's accordingly
Click to expand...
Click to collapse
try to use fastboot command?
do you have root?
maybe file manager in QtADB could help you?
doesnt work it keeps saying about the unsigned img. weird, heres a screen shot from fastboot getvar all
ive removed my serial number from picture for obvious reasons
im thinking trying to put the euro xxx version flashed with only kdz update and see if it says still that its unlocked
friartuckme said:
im thinking trying to put the euro xxx version flashed with only kdz update and see if it says still that its unlocked
Click to expand...
Click to collapse
story is you cannot even use adb reboot oem-unlock on that version, so if it works now, maybe you can flash to images too?
ie.
fastboot flash lnx boot.img
and
fastboot flash sos recovery.img
might be you need to write boot and recovery, didnt actually confirm the above yet.
il give it a try
its been the fastboot oem unlock that seems to have been doing it,i reflashed and done only that command , heres a screenshot
with the fastboot flash sos recovery.img i get the following
sending 'sos' (6612 KB)...
OKAY [ 1.513s]
writing 'sos'...
FAILED (remote: Invalid Partition Name.)
finished. total time: 1.825s
friartuckme said:
with the fastboot flash sos recovery.img i get the following
sending 'sos' (6612 KB)...
OKAY [ 1.513s]
writing 'sos'...
FAILED (remote: Invalid Partition Name.)
finished. total time: 1.825s
Click to expand...
Click to collapse
try replace sos with recovery
ie.
fastboot flash recovery recovery-6028.img
you need the image from my distribution which is named recovery-6028.img
Dexter_nlb said:
try replace sos with recovery
ie.
fastboot flash recovery recovery-6028.img
you need the image from my distribution which is named recovery-6028.img
Click to expand...
Click to collapse
it wrote it
sending 'recovery' (6612 KB)...
OKAY [ 1.576s]
writing 'recovery'...
OKAY [ 0.905s]
finished. total time: 2.480s
but still getting error boot image signature
Hello,
I made a mistake of using a .bat file created by someone to unlock my bootloader. After going through the .bat file, I see that it nulled my boot.img file on the phone, so now I'm stuck in fastboot mode (previously nulled LAF to get access). The irony here is that I do have a backup of the boot.img file on both my PC and on the phone's internal memory, but there's no way (atleast I haven't found one) to actually flash it back so it would work. So my question here would be - do you guys have any ideas how should I proceed? I tried using fastboot flash, but all I get in turn is an error:
"FAILED (remote: unknown command)"
Device is not unlocked (as I was trying to get it unlocked). I have no access to anything else other than fastboot.
getvar all outputs this:
(bootloader) display-panel:
(bootloader) charger-screen-enabled: 0
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x38400000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0xfbd80000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x80000000
(bootloader) unlocked: no
(bootloader) secure-boot: no
(bootloader) version-hardware: rev_10
(bootloader) variant: w7n_global_com Samsung 8GB
(bootloader) serialno: LGD405aa16eaa7
(bootloader) kernel: lk
(bootloader) product: W7N_GLOBAL_COM
all:
finished. total time: 0.041s
Any input to this thread is appreciated!
Hello. i've got razr i with stock 4.4.2 eu. android version. absolutely stock.
once i've waked up and seen mistake message from GP servises and viber. it was looping window. I've decided to reboot my phone, but it's nothing heppens after M logo.
I can enter fastbooth with pressing Vol - and connecting USB to PC.
So.
this is my log from fastboot
(bootloader) version-bootloader: 0x2025
(bootloader) product: smi
(bootloader) secure: yes
(bootloader) rom-key: motorola-key
(bootloader) model-id: 0268
(bootloader) cid: 7
(bootloader) version: 0.5
(bootloader) uid: 02024F9481610C97587432F726DA
(bootloader) max-download-size: 104857600
(bootloader) emmc-size: 8GB
(bootloader) qe: qe 0/1
(bootloader) unlocked: no
(bootloader) is-warranty-void: no
(bootloader) ifwi: 42.26
(bootloader) cpu: Intel(R) Atom(TM) CPU Z2480 @ 2.00GHz
(bootloader) kernel: droidboot
(bootloader) battery: capacity: 92, voltage: 4223125, temperature: 250
(bootloader) modem-status: secure
all:
finished. total time: 0.358s
I've tryed to unlock bootloader, but it's failed
C:\RAZRi_Root_Windows>fastboot oem unlock YD2NIQNLLXYYM6Y4LNPX
...
(bootloader) BLKDISCARD ioctl /dev/block/mmcblk0 fail
(bootloader) Erase userdata fail
(bootloader) General Unlock failure!
(bootloader) OEM unlock failure!
FAILED (remote failure)
finished. total time: 8.472s
No result if i wright in cmd fastboot erase userdata
Mistake and failed on flashing with RSD on step Erase Used Data
Unbriking doesn't help too.
What am i doing wrong?
Hello !
I wanted to check if ARB was activated on my mi8 (Locked bootloader, miui 9.5 version 9.6.7.0) , so I launched the command "fastboot getvar anti" in fastboot mode and it says "error: no such variable"
So then I launched "fastboot getvar all" and this is what it printed :
(bootloader) crc:1
(bootloader) DP:0x0
(bootloader) token: xxxxxxxxxxxxxxxxxxx
(bootloader) partition_version:LUN0-5 partition version: 2 3 3 2 3 2
(bootloader) cpuid:0x85690c6b
(bootloader) board_version:3.13.0
(bootloader) unlocked:no
(bootloader) qseelog-enabled:0
(bootloader) off-mode-charge:0
(bootloader) charger-screen-enabled:0
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:3834
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) variant:SDM UFS
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x10000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x1C457FB000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xC0000000
(bootloader) secure:yes
(bootloader) serialno:xxxxxxxxxx
(bootloader) product:dipper
(bootloader) max-download-size:536870912
(bootloader) kernel:uefi
all:
finished. total time: 0.104s
Click to expand...
Click to collapse
Shouldn't I have an "anti" variable with a number normally ?
does I have ARB activated or is there another way to know if ARB is activated ?
Thanks in advance for your answer !
3lambda said:
Hello !
So then I launched "fastboot getvar all" and this is what it printed :
Click to expand...
Click to collapse
Hmmm.... I have an unlocked bootloader on a Chinese version converted to Global running TWRP, DM-Verity remove, and Rooted Miui10 8.9.6
My GetVar All (hid my token & ser #):
Code:
[SIZE="1"](bootloader) crc:1
(bootloader) DP:0x0
(bootloader) token:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) partition_version:LUN0-5 partition version: 2 3 3 2 3 2
(bootloader) cpuid:0xe0dbad12
(bootloader) board_version:3.3.0
(bootloader) unlocked:yes
(bootloader) qseelog-enabled:0
(bootloader) off-mode-charge:0
(bootloader) charger-screen-enabled:0
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:4194
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) variant:SDM UFS
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x10000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x1C457FB000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xC0000000
(bootloader) secure:yes
(bootloader) serialno:26XXXXX
(bootloader) product:dipper
(bootloader) max-download-size:536870912
(bootloader) kernel:uefi
all:
finished. total time: 0.005s[/SIZE]
Agimax said:
Hmmm.... I have an unlocked bootloader on a Chinese version converted to Global running TWRP, DM-Verity remove, and Rooted Miui10 8.9.6
My GetVar All (hid my token & ser #):
Click to expand...
Click to collapse
I guess if you type "fastboot getvar anti“ you have a error too ?
Yes, it is error
Agimax said:
Yes, it is error
Click to expand...
Click to collapse
Thanks for your reply
Could be interesting to see what other people have as result
I get the same thing, error
You don't have ARB on that rom.
_katho_ said:
You don't have ARB on that rom.
Click to expand...
Click to collapse
Thanks for this reply
But shouldn't we have "anti" followed by 2 or 3 at least ?
Try "fastboot getvar anti" and see the result.
Hi there,
I would like to root my Nokia 8 phone as it went out of warranty. I am new to deep Android hacks so I am basically following the guide: How to root your Nokia 8. My bootloader is unlocked with the official procedure. The next step is to boot with a TWRP or a prerooted image and install Magisk.
Unfortunately when I use the fastboot utility, the loading is done corectly and the phone reboots but then gets stuck on the "Powered by Android" splashscreen. This is occuring with both twrp-3.2.3-0-NB1.img and twrp-3.2.3-1-NB1.img
Here is the content of "fastboot getvar all" if that's relevant:
Code:
(bootloader) unlocked:yes
(bootloader) off-mode-charge:1
(bootloader) charger-screen-enabled:1
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:3792
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) variant:MSM UFS
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0xCEC456000
(bootloader) partition-type:system_b:ext4
(bootloader) partition-size:system_b: 0xE0000000
(bootloader) has-slot:modem:yes
(bootloader) has-slot:system:yes
(bootloader) current-slot:b
(bootloader) has-slot:boot:yes
(bootloader) slot-retry-count:b:5
(bootloader) slot-unbootable:b:no
(bootloader) slot-successful:b:yes
(bootloader) slot-retry-count:a:0
(bootloader) slot-unbootable:a:no
(bootloader) slot-successful:a:yes
(bootloader) slot-count:2
(bootloader) slot-suffixes:_a,_b,
(bootloader) secure:yes
(bootloader) serialno:NB1GASxxxxxxxxxxx
(bootloader) product:QC_Reference_Phone
(bootloader) max-download-size:0x20000000
(bootloader) kernel:uefi
(bootloader) version:0.0
Has someone got the same error and solved it? Is there any way to print some debug information during the booting step?
Thanks,
MatPy
OK, I found an answer there: https://tmsp.io/fs/xda/nb1/README.txt
Temporary booting:
As of NB1-488G-0-00WW-B01 the command "fastboot boot" is broken and does
not work like it should. It will lock you in the "Powered by Android"
screen without actually booting the image you supplied. To exit the screen,
please do "fastboot reboot" and then flash the image you wanted to boot to
your active boot partition.
Click to expand...
Click to collapse
So you can't actually use TWRP without installing it with a up-to-date firmware. Why the Rooting Guide is not updated with this information? This isue is old as it appeared with the 2018-08 security patch.
MatPy said:
Hi there,
I would like to root my Nokia 8 phone as it went out of warranty. I am new to deep Android hacks so I am basically following the guide: How to root your Nokia 8. My bootloader is unlocked with the official procedure. The next step is to boot with a TWRP or a prerooted image and install Magisk.
Unfortunately when I use the fastboot utility, the loading is done corectly and the phone reboots but then gets stuck on the "Powered by Android" splashscreen. This is occuring with both twrp-3.2.3-0-NB1.img and twrp-3.2.3-1-NB1.img
Here is the content of "fastboot getvar all" if that's relevant:
Code:
(bootloader) unlocked:yes
(bootloader) off-mode-charge:1
(bootloader) charger-screen-enabled:1
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:3792
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) variant:MSM UFS
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0xCEC456000
(bootloader) partition-type:system_b:ext4
(bootloader) partition-size:system_b: 0xE0000000
(bootloader) has-slot:modem:yes
(bootloader) has-slot:system:yes
(bootloader) current-slot:b
(bootloader) has-slot:boot:yes
(bootloader) slot-retry-count:b:5
(bootloader) slot-unbootable:b:no
(bootloader) slot-successful:b:yes
(bootloader) slot-retry-count:a:0
(bootloader) slot-unbootable:a:no
(bootloader) slot-successful:a:yes
(bootloader) slot-count:2
(bootloader) slot-suffixes:_a,_b,
(bootloader) secure:yes
(bootloader) serialno:NB1GASxxxxxxxxxxx
(bootloader) product:QC_Reference_Phone
(bootloader) max-download-size:0x20000000
(bootloader) kernel:uefi
(bootloader) version:0.0
Has someone got the same error and solved it? Is there any way to print some debug information during the booting step?
Thanks,
MatPy
Click to expand...
Click to collapse
The only way to install the offical TWRP on Android 9 is to flash TWRP to boot slot B then install TWRP zip for both slots so slot A will receive TWRP. the only thing left is to switch back to slot A.