When I set my Diamond to Auto configuration it always chooses GSM with GPRS data, I believe its because the signal is stronger than 3G.. If I set the phone to 3G it works fine (almost always shows full signal strenght). But at my work I have no 3G signal, and I need to manually set the phone to "auto" och GSM again, and it wont change back to 3G when there is 3G in range again (even if I choose Auto).
So, my question is, is there any app or solution to ALWAYS be connected to 3G when there is enough signal, if not, it will choose GSM until it finds the 3G signal again?
Im getting quite irritated when I need to change the band manually several times a day...
Thanks..
Hello
I have diferent problem but i try to find some application to fast switch band from gsm to auto and auto to gsm
Thanks
Nicolas
mil_house said:
Hello
I have diferent problem but i try to find some application to fast switch band from gsm to auto and auto to gsm
Thanks
Nicolas
Click to expand...
Click to collapse
Advanced Config has an option to add a '3G' button to CommManager which does exactly what you want.
What I would really like however, is a 3G button that toggles between '3G' and 'GSM', rather than 'Auto' and 'GSM'
Anyone ?
I desperately want to know if hsdpa can be on/off in new cyanogenmod 7.2 for galaxy mini because an app in android market named "hidden features free sammy edtn" was successfull in enabling/disabling hsdpa in stock rom but it does not work on cm 7.2 !!!
psndna88 said:
I desperately want to know if hsdpa can be on/off in new cyanogenmod 7.2 for galaxy mini because an app in android market named "hidden features free sammy edtn" was successfull in enabling/disabling hsdpa in stock rom but it does not work on cm 7.2 !!!
Click to expand...
Click to collapse
setting - wireless - mobile network
denkext said:
setting - wireless - mobile network
Click to expand...
Click to collapse
i dont want to disable 3g network, just want to switch to umts data or hsdpa data as per requirement.. it helps massively saving battery ...
in my case i used the software named "hidden features free sammy edtn" on stock 2.2.1 and switched to release 99(WCDMA DATA ONLY & 3.5G off) then i installed cm7.2, since then im on wcdma data and i cannot switch to hsdpa data... so i need an option to change 3g data DEVELOPERS HELP
I don't know how this will help.
*#*#4636#*#*
In phone info u can choose the preferred network.
Heard gsm auto prl saves battery.
roofrider said:
I don't know how this will help.
*#*#4636#*#*
In phone info u can choose the preferred network.
Heard gsm auto prl saves battery.
Click to expand...
Click to collapse
no .. this does not help in disabling HSDPA data.. help plz
psndna88 said:
no .. this does not help in disabling HSDPA data.. help plz
Click to expand...
Click to collapse
HSDPA is nothing simply some improved version of 3G or similar network... If you don't use mobile data packet, i.e. 3G/2G or any means of connection via sim card then HSDPA is already disabled.
yagya said:
HSDPA is nothing simply some improved version of 3G or similar network... If you don't use mobile data packet, i.e. 3G/2G or any means of connection via sim card then HSDPA is already disabled.
Click to expand...
Click to collapse
yagya ill explain what im trying to say:
1: if i type *#301279# (HSDPA/HSUPA Control Menu) on stock rom i can disable hsdpa and 3g radio works as R99 mode (UMTS data only, hsdpa off, 3.0G)
2: i try to do the same on cm 7.2, nothing happens,, i dont get a menu
3: i tried appending ro.ril.hsxpa=0 to system.prop in /system using root explorer,,, after many restarts it doesnt work either,,,
u see the problem here is im subscribed to tata docomo 3g network here in india, the 3g data plans are sky high and very much unaffordable.. so im in 2g data plan : luckily my operator allows me to use 3g network but with speed limited to 18kBps because of 2g plan subscription..... so all the time using 3.5G with hsdpa for just 18kBps is useless + its a battery eater even for just chatting !
use the. notification power widget function. it's in cyanogenmod setting.
there's a toggle to change 2G or 3G network.
sent from Nokia 3310
chepoz said:
use the. notification power widget function. it's in cyanogenmod setting.
there's a toggle to change 2G or 3G network.
sent from Nokia 3310
Click to expand...
Click to collapse
u see, 3g network mode always does not always imply hsdpa mode to be used.. i want to configure the 3g radio to use only umts packet data(3.0G) and to switch off hsdpa(3.5G) packet data service WHILE USING 3G network all the time... a stock rom can do it, why can't cyanogenmod???
>> an app in android market named "hidden features free sammy edtn" was successfull in enabling/disabling hsdpa in stock rom but it does not work on cm 7.2rc3 !!!
>> *#301279# (HSDPA/HSUPA Control Menu) on stock rom i can disable hsdpa and 3g radio works as R99 mode (UMTS data only, hsdpa off, 3.0G) but this code doesnt work on cm7.2rc3
maybe that is the lack from cm7, don't use it if it won't satisfy u.
sent from Nokia 3310
chepoz said:
maybe that is the lack from cm7, don't use it if it won't satisfy u.
sent from Nokia 3310
Click to expand...
Click to collapse
you know, everything else satisfies me except the hsdpa thing i want to let the developers know but i dont know where to post this important feedback suggestion
psndna88 said:
you know, everything else satisfies me except the hsdpa thing i want to let the developers know but i dont know where to post this important feedback suggestion
Click to expand...
Click to collapse
be patient, maybe there's some dev who read your post may help u
sent from Nokia 3310
Hi,
I noticed at my work my Edge is stronger then my LTE but LTE works better and of course faster then Edge. I am asking if anyone knows how to force only GSM for calls and LTE for data. I go through the options and notice many settings but LTE is always "LTE AUTO" I also use the hidden menu *#*#4636#*#* and set LTE only or CDMA, LTE Unfortunately I am on Rogers and CDMA does not allow my calls to go through and LTE only is exactly that only LTE. Both those options work great but of course drop sporadically which I can live with except the no phone part. What is the point of having a phone if you have no phone reception working on your phone.....
So my question is simple, is there a way to have only GSM and LTE set up or at least GSM and 3G/4G but with out the E network which ever that is.
Thanks
JB
No one?
dudejb said:
No one?
Click to expand...
Click to collapse
Are there any Mods to keep LTE active in low reception area.
dudejb said:
Are there any Mods to keep LTE active in low reception area.
Click to expand...
Click to collapse
You could force LTE only, but then when the reception drops off, you'll have zero cell service.
It would be nice if there were more options offered for preferred networks. I leave mine on WCDMA preferred, and just do without LTE until I want/need it.
Hey, im not sure what i should have called this thread but anyway, when i lose LTE on my phone it used to switch to H+, now it switches to 3G. Basically im wondering what i need to switch in the default file to display H+ instead of 3G
i hope this makes some sense
Well 3g and H+ are different. You can check to make sure in data settings that you have GSM/WCDMA/LTE AUTO set in there.
Howie3045 said:
Hey, im not sure what i should have called this thread but anyway, when i lose LTE on my phone it used to switch to H+, now it switches to 3G. Basically im wondering what i need to switch in the default file to display H+ instead of 3G
i hope this makes some sense
Click to expand...
Click to collapse
I basically loose the H (HSPA) service with my operator by taking the 4G package, I get 4G LTE, and in bad coverage area's, which is almost everywhere for Vodafone UK except major cities, I get a G or an E unless I can connect to a wifi.
hi i need help regarding threshold of LTE to 2g ... i want to control these settings ,, bcoz in my country my service provider has just two services lte and 2g it means lowest signal n reception of lte is better then 2g so i dnt want to swith it to 2g ever ... i can select in *#2263# menu "lte only" its make the mobile just for the internet cant make gsm calls and recieve in this lte only mode... ... so only thing i want and i should is to control threshold of switching between 2g nd 4g ... please tell me how to do it thanks...
I need access to change my mobile network mode to "LTE/WCDMA/GSM" in cyanogenmod 12.1.
It currently will only allow me to select one. I can use the access menu to select what I want but when I return to the network mode selection in the main setting UI it moves to one of these options.
LTE
3G
2G