I've been a lurker on XDA for 6 years, but this is the first post, so I can't post in the development section. Is anyone interested in releasing a tweaked stock kernel that can be undervolted? That's free battery life improvements and cooler temperatures on the table that we aren't utilizing. Thanks.
undervolt capable kernel for all Quarks here:
[Kernel][All Quark]BHB27-Kernel[5.1.1][CM base ROM's][V-1.2.3]
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
or you're asking for another one?
Sorry, should have specified that I'm looking for a kernel compatible with the stock ROM, or in my case, Computerfreek's unlocked ROM for the XT1254.
^^ i second that motion, ive tried flashing BH's kernel on CF's rom and it does not work.
@baybutcher27 did Motorola release the source for their kernel?
yes.
https://github.com/MotorolaMobilityLLC/kernel-msm/tree/lollipop-5.1.1-release-quark
the job is not easy to make adaptation to stock kernel is need the kernel source for that ROM that one is for su44 but I don't believed that is 100% update in relation to the kernel that is on Su 44, some tings are odd to me when I look to the source but it must work. we can make that one to work on custom ROM, but to make it work on stock, is need a dev that have a XT1254 and are on verizon network and a lot of time.
Most change that I make work on custom can be ported to the stock kernel, so if a dev can do this it just need to check to my or any other msm or apq8084 device nexus 6, and samsung device that have apq8084 variant note 4 and S5 maybe others.
I can make my kernel boot on xt1225 5.0.2 stock ROM, but many tings don't work of course that kernel source is not made to xt1225 stock ROM but I can make it boot, so if a dev has a xt1254 and are on verizon may have more luck.
Related
Hello everyone After selling my xperia u I got this cellphone which is At&T branded .... I was running gingerDX on my xperia x8 a long time ago then I installed some custom roms on xperia U as well after unlocking it's bootloader and installing custom kernels etc. I sold xperia U as it was a bit slow for me....
Now the question I want to ask is : what are some good roms (without any bugs) fast and stable for this cellphone ? right now I'm on Android 4.1.1 official ... is it good enough if I only root it or should I go for a custom kernel / Rom and what is the easiest method to root it ?
Reagrds...
orangzeb said:
Hello everyone After selling my xperia u I got this cellphone which is At&T branded .... I was running gingerDX on my xperia x8 a long time ago then I installed some custom roms on xperia U as well after unlocking it's bootloader and installing custom kernels etc. I sold xperia U as it was a bit slow for me....
Now the question I want to ask is : what are some good roms (without any bugs) fast and stable for this cellphone ? right now I'm on Android 4.1.1 official ... is it good enough if I only root it or should I go for a custom kernel / Rom and what is the easiest method to root it ?
Reagrds...
Click to expand...
Click to collapse
Arrgh kernel for photon Q LTE works for our phone too, best and only(?) custom kernel we have besides N8 (only for 4.2.2 ROMs). Carbon, CM 10.2, PACman, and HoloBlur are my personal best experiences with this phone.
Sent from my MB886 using xda app-developers app
Carbon 4.3 nighlies by far the best and most stable
Sent from my MB886 using Tapatalk now Free
As for rooting and unlocking bootloader plus flashing a custom recovery, the Myth Tools program for Atrix HD has all those 3 things wrapped into one easy executable.
Here: http://forum.xda-developers.com/showthread.php?t=2262726
Sent from my MB886 using xda app-developers app
ignore this.
Thank Neighbor808 if you provide 2, 3 links for roms and the link to kernel I'll be thankful to you.. as I don't want to risk anything here as I'm new to Motorola world
Generally, look for files under mb886. Anyways, here ya go.
CM: http://get.cm/?device=mb886
Carbon: http://goo.im/devs/carbon/mb886/nightly
PACman: http://forum.xda-developers.com/showthread.php?t=2398627
HoloBlur (Stock based): http://forum.xda-developers.com/showthread.php?t=2356624
Argh Kernel: http://forum.xda-developers.com/showthread.php?p=31708952
Make sure you get CM 10.2 kernel for non stock based. Don't flash the kernel of the date of your nighty is later than the kernel (Oct 2 so far). It gets updated regularly.
Sent from my MB886 using xda app-developers app
I can't figure out which kernel to download ASA / FFW ? I've downloaded Oct 2 version of carbon ROM, any thread with it's screenshots and features etc ?
Please also tell in which sequence I should do the procedure ? like : root > recovery > Unlock Bootloader > kernel and then rom ?
Root, unlock bootloader, recovery, backup current rom, wipe data and system, flash rom then kernel.
Sent from my PACMAN MATRIX HD MAXX
Deeje is spot on. As for which kernel to download, Post #2 contains the kernels for STOCK or Stock-based ROMs. All of the ROMs I linked to you are CM-Based except for HoloBlur, which is stock based (but it already comes with Arrgggh kernel so don't worry about that). The thread clearly states:
ASA-36 (Original 4.0.4 ICS firmware)
ASA-14 (Final 4.0.4 ICS firmware)
FFW-5 (Latest 4.1.2 JB firmware)
Pretty much the only stock kernel you're ever going to need unless you fastboot flash back to ICS is FFW-5.
Post #5 contains the kernels for CM-Based ROMs (Pretty much all the ROMs out there that aren't stock based). The CM 10.1 Kernel is for Android Version 4.2.2 ROMs, while the CM 10.2 kernel is for Android Version 4.3 ROMs. If you are flashing Carbon October 2 nightly, that is Android 4.3, so you will flash the CM 10.2 edition.
Here's links for the standalone posts to make sure you know where you're going...
-------------------------------------------------------------------------------------------------------------------------
Stock Kernel: http://forum.xda-developers.com/showpost.php?p=31708970&postcount=2
CM Kernel: http://forum.xda-developers.com/showpost.php?p=31717152&postcount=5
By the way, check Atrix HD Development section, has all of our ROMs + screenshots and explains features.
Thanks alot homie this explains everything now tell me some good features of Carbon / Pacman Roms so I consider flashing ?
Carbon is basically CyanogenMod with some great Paranoid Android features added in (like Halo, PIE, navbar customization, etc.) . Smooth, reliable, great battery. PACman is a combination of 3 popular ROMs (Paranoid Android, AOKP, CyanogenMod) and has pretty much every feature you can think of. Highly customizable, but has a few minor bugs and slightly worse battery. Carbon is more stable but not by a whole lot.
Official Carbon thread: http://forum.xda-developers.com/showthread.php?p=42183613
[ROM][AOSP] [Nightly/Release] CarbonRom JB [MB886]
Sent from my MB886 using xda app-developers app
Make sure you get CM 10.2 kernel for non stock based. Don't flash the kernel of the date of your nighty is later than the kernel (Oct 2 so far). It gets updated regularly.
Click to expand...
Click to collapse
didn't understand this line...
Can I flash latest carbon nightly builds if my kernel date is earlier?
orangzeb said:
didn't understand this line...
Can I flash latest carbon nightly builds if my kernel date is earlier?
Click to expand...
Click to collapse
Yes, you can. Just take latest kernel currently - Oct 23 2013 CM10.2 and latest Carbon rom from here (*Currently there are some problems on goo.im*) or here.
Kernel and rom date should be close as possible to avoid problems.
If there will be newer kernel then it might not work if rom is older than kernel but even then if there are any problem you can just re-flash earlier kernel. Although you don't really have to mess with kernel at first. Carbon actually come with a working kernel (latest build have mattmanwrx kernel) but it doesn't support overclocking/undervolting.
Ohh, and don't forget to flash gapps if you need them..
Thanks mate... for me most stable versions of kernel and roms are : 7 oct 2013..... I don't want to change them untill something really big comes out....I don't like overclocking as ATRIX HD is fast enough already with or even without pureperformance mod but I see battery improvements via that mod or maybe that's "Greenify" app that I'm using...
OK, I know that most people use the X for a pure, unmodified version of Android. I respect that. I believe that too, but if I could squeeze just a tiny bit more performance out of this device, it would be great. Is anyone here experienced with kernel development and wants to help develop a kernel for our beloved device?
@faux123 is supposed to develop one eventually. Otherwise CM uses a custom kernel for their ROM. I'm waiting for something compatible with stock though.
I know that this is a ridiculous request since all of you are contributing here without any gains, and no body can demand something to be done for free!
But, I was wondering, with so much development going on over CM based ROMs for Moto X, why is there no ROM that is being developed by changing the stock rom?
I guess it is because the source for the stock ROM is unavailable, but wouldn't there be other ways to mod the ROM? I want to know this because I feel the performance of ROMs available here (on Moto X Development forum) is far better than the stock ROM. However, I love the active display and Moto Voice features of stock.
I tried using xposed and got most of the features (IME keys,RAM bar,lockscreen mods, clear all in recents, etc.) on stock 5.1, but my phone is too slow, compared to from when I was using Carbon/AICP/Resurrection ROMs (Thanks to those devs again).
Once the sources are available for 5.1 modding will happen.
5.1 was just released be patient but if you want a modded rom with stock features, try eclipse 4.4.4
Any chance we'll ever see an update to our 3.4 kernels to a modern 3.10 kernel in stock images? It appears that the Z4 ships with 3.10 kernel, but no such luck for the older generation devices.
Assuming the answer to 1st question is no, are there any custom kernels available for our phones that are suitable for running in conjunction with our stock (rooted) 5.1.1 OS images?
Correct me if I am wrong, but with out unlocked bootloader, a dev could make a sense rom if there was enough kind requests?
While the unlocked bootloader makes it possible, that doesn't mean it will happen. Most developers don't make ROMs because its requested, but because they enjoy doing so and giving to the community. We could all band together and request a billion dollars from the bank but that's not gonna make them give it to us.
Unfortunately, those of us with a quark phone with a passion for modding and flashing is small. That's why we don't ha e a community with tons of ROMs like Nexus and other flagship devices.
But what we do have is a top of the line phone with some DEV love that is truely appreciated by those of us that use it and take pride in having a special unique phone.
However. There is an Xposed add-on that will allow you to flash sense apps, and with some theming and tweaks you can make CM almost look and function exactly like sense
What he said. Due to Verizon locking down the bootloader, which took about a year to overcome, the Droid Turbo XT1254 got ignored by a lot of devs.
However, dev work was done on the sibling Quarks (Moto Maxx/Moto Turbo XT1225)-- which luckily also works on the Droid Turbo (now that that bootloader is unlocked). Only problem is Motorola did not sell the other Quarks in places like Europe, Canada nor Asia (except for India) and even in the U.S. the unlockable bootloader Quark (the U.S. Moto Maxx, with same FCC ID as the Droid Turbo) was only sold via regional CDMA/LTE carriers and hard to get. The "international" Moto Maxx XT1225 was sold in Latin American countries and the Moto Turbo XT1225 was sold in India. This should have been a WORLD WIDE phone, sold EVERYWHERE -- like a Samsung or LG flagship phone, but was not for some reason. Very strange!
However, there's 3 or 4 custom 5.1.1 ROMs over in the Quark/Moto Maxx section which will work with the XT1254:
* [ROM][5.1.1][OFFICIAL][QUARK] MoKee OpenSource Project
MoKee OpenSource is based on the Google AOSP. @baybutcher27 is the dev.
http://forum.xda-developers.com/moto-maxx/development/rom-mokee-opensource-project-t3188936
* [ROM][All Quark][5.1.1]Resurrection Remix 5.5.9 [Optimized / O3 / GRAPHITE / KRAIT]
Resurrection Remix has tons of options. @BayButcher is the also the dev for this ROM, which is very popular.
http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-5-5-5-t3197643
* [Moto MAXX XT1225 / Droid Turbo XT1254][OFFICIAL] CyanogenMod 12.1
CM12.1 was our first custom ROM and without it there would be no others, because all the Quark (Droid Turbo/Moto Maxx/Moto Turbo) custom ROMs use @Skrilax_CZ CM kernel in their ROMs. Even @baybutcher27 kernel uses @Skrilax_CZ CM kernel as a base.
http://forum.xda-developers.com/mot.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
Also, a custom kernel:
* [Kernel][All Quark]BHB27-Kernel[5.1.1][CM base ROM's][V-1.2.3]
Custom kernel for our Quarks, using CM kernel as base but with lots more options. @baybutcher27 is the dev.
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
I don't see any Sense ROM for any non HTC device.
Are you guys thinks that is really possible to make one for quark? I'm not shore if a regular dev can do, a very experience dev with Knowledge of CM quark and or Sense porting may, but I don't see one available to do that, I know I can't today and even if I do only that I may never be able some things are really hard to port.
Make a CM base ROM is easy any one can do if follow CM default recipe there is no mystery, may take a while to learn a few thing but is generally easy, the most hard thing is to setup the machine but for that google has a good tutorial and all the ROM manifest on git have they on too like RR for exemplo, if the particularly source need special config it will be on they manifest on git, if it is not there, is a easy find by just searching on other Moto device for that source.
Google tutorial
RR tutorial
So if you guys really wanna a ROM make your hands dirty and try to make one start by the easiest one that are CM base, the only thing that is need is a PC/Notebook with internet access average CPU about 100 to 150gb of free space, I'm build for months on my notebook and is a really simple one...
For a fact I know MM will bring new ROM different from the one we have today, I see some other dev with they MM source ready to make a ROM for quark the only problem is that today custom ROM are not working on MM but they will soon and then more ROM will be available.
If any one need help in build a ROM fell free to open a thread and quote me to help I will but don't expect step by step tutorial that already exist on google and XDA, I help in some things that are not much common and or related to quark only.
Fell free too to quot this post to any one that wanna this or that ROM, this way we may have more ROM in the future.
:good:
baybutcher27 said:
I don't see any Sense ROM for any non HTC device.
Are you guys thinks that is really possible to make one for quark? I'm not shore if a regular dev can do, a very experience dev with Knowledge of CM quark and or Sense porting may, but I don't see one available to do that, I know I can't today and even if I do only that I may never be able some things are really hard to port.
Make a CM base ROM is easy any one can do if follow CM default recipe there is no mystery, may take a while to learn a few thing but is generally easy, the most hard thing is to setup the machine but for that google has a good tutorial and all the ROM manifest on git have they on too like RR for exemplo, if the particularly source need special config it will be on they manifest on git, if it is not there, is a easy find by just searching on other Moto device for that source.
Google tutorial
RR tutorial
So if you guys really wanna a ROM make your hands dirty and try to make one start by the easiest one that are CM base, the only thing that is need is a PC/Notebook with internet access average CPU about 100 to 150gb of free space, I'm build for months on my notebook and is a really simple one...
For a fact I know MM will bring new ROM different from the one we have today, I see some other dev with they MM source ready to make a ROM for quark the only problem is that today custom ROM are not working on MM but they will soon and then more ROM will be available.
If any one need help in build a ROM fell free to open a thread and quote me to help I will but don't expect step by step tutorial that already exist on google and XDA, I help in some things that are not much common and or related to quark only.
Fell free too to quot this post to any one that wanna this or that ROM, this way we may have more ROM in the future.
:good:
Click to expand...
Click to collapse
Wow thanks alot, mabye ill have to give it a shot