WIP: Multiboot project for zenfone 2[Z00A][Z008]

WIP: Multiboot project for zenfone 2[Z00A][Z008] - ZenFone 2 Android Development

Multiboot project is a work done by @chenxiaolong , I do not own any of the work presented over here.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Project
* before installing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/[/CENTER]
About Multiboot : A project to handle different ROMS at the same time so that you actually can use different ROMS without having to wipe up device to flash ROMS, it allows installation of more thn one ROM with all the features enabled.
USAGE
1. First, boot into your primary ROM and install the Dual Boot Patcher app
2. Open the app and go to "Roms" in the navigation drawer. It will ask if you want to set the kernel. Make sure that you do.
3. Go to "Patch zip file" in the navigation drawer and patch the ROM or zip you want to install.
In-app flashing
To use in-app flashing, go to "Roms" in the navigation drawer, tap the floating button on the bottom right, and add the zips you want to install. You can queue multiple zips and they will all be flashed in one go. Once you've added all the zips you want to flash, click the check mark in the action bar and they will be flashed right away.

DOWNLOAD : https://snapshots.noobdev.io/
ORIGINAL THREAD : http://forum.xda-developers.com/showthread.php?t=2447534
CURRENT ISSUES
#since this is a work in progress please do consider having a look here
SIM related ISSUES : once a ROM is flashed using multiboot and you switch back
to original ROM, SIM 1 does not connects to network.
We do not support Z008 at the moment
DONATION (this donation directly goes @chenxiaolong ,I do not take any of it) : http://forum.xda-developers.com/donatetome.php?u=4277844 #if not sure about the link kindly visit:
http://forum.xda-developers.com/member.php?u=4277844
CREDITS
All credits goes to @chenxiaolongfor his hard work on this project,
kindly say thanks to him

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Quick info
The patcher offers several locations for installing ROMs:
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage.
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
With that said, let's get to the "how to"!
First, boot into your primary ROM and install the Dual Boot Patcher app
Open the app and go to "Roms" in the navigation drawer. It will ask if you want to set the kernel. Make sure that you do.
Go to "Patch zip file" in the navigation drawer and patch the ROM or zip you want to install. You can select one of the installation locations described above.
There are two ways of flashing the patched zip file. You can either flash it normally from recovery or flash it using the in-app flashing feature. Both methods are explained below.
Flashing from recovery
To flash from recovery, just flash the patched zip file like you would for any other zip. Nice and simple.
In-app flashing
To use in-app flashing, go to "Roms" in the navigation drawer, tap the floating button on the bottom right, and add the zips you want to install. You can queue multiple zips and they will all be flashed in one go. Once you've added all the zips you want to flash, click the check mark in the action bar and they will be flashed right away.
App and data sharing
DualBootPatcher very recently got support for sharing apps and their data across ROMs. Maybe sharing is somewhat of a misleading term. The feature actually makes Android load the shared apps and data from a centralized location, /data/multiboot/_appsharing. So you're not sharing apps from one ROM to another per se. The ROMs are just loading the apps from one shared location. Let me make this clearer with an analogy.
Think of the people in a company office as ROMs. You want to share with your coworkers some documents (apps). Instead of telling them to come over to your desk to see those documents (sharing apps from one ROM to another), everyone goes to the conference room to look at the documents together (loading apps from a shared location). That's how app and data sharing is implemented.
To use app sharing, follow these steps in every ROM that you want to use app sharing:
Install the app you want to share
Open DualBootPatcher and go to "App Sharing" in the navigation drawer
Enable individual app sharing
Tap "Manage shared applications" and enable APK/data sharing for the app
Reboot
When you uninstall an app that's shared, it simply become unshared for the current ROM. That way, other ROMs are not affected. To continue the analogy above, if you quit your job, you won't shred the documents that everybody else was looking at.
If you unshare an app's data, it will go back to using the data it had before it was shared. In other words, you leave the conference room and go back to work on your own documents at your desk.
How do I...?
Switch the ROM if something doesn't work properly?
You can flash the DualBootUtilities zip from recovery. It will provide a menu interface that allows switching to the various ROMs.
If you have TWRP, you can also switch manually by tapping Install -> Images (bottom right) -> Go to /sdcard/MultiBoot/[Your ROM]/ -> flash boot.img.
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Alternatively, flash the DualBootUtilities zip from recovery, which will also allow you to wipe a ROM.
NOTE: Don't use the recovery's built-in wiping abilities as that may delete non-primary ROMs!
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Last Resort if you messed your SIMclean flash stock or prism barebone or any other ROM you like

Good
Before u use think twice

Nyks45 said:
Good
Before u use think twice
Click to expand...
Click to collapse
haha yes thats true maybe thats y I mentioned to have a look at the issues in big font lol

This thread will have many viewers i am sure of that

So want to do this. Cant wait for sim card issue to clear!

Clean install after reverting back from multiboot will fix the sim issue...??or it will go forever....??

rex_perfect said:
Clean install after reverting back from multiboot will fix the sim issue...??or it will go forever....??
Click to expand...
Click to collapse
yes clean install fixes up the issue, this issue is not app related, it follows us from the fact that flashing cm 12.1 over cm 13 also causes sim issue, something goes wrong in the config partition, a faster solution might be to make a backup of orignal config (primary rom) and when reverting back just flash back the backup

Looks magic but hmm... it could be usefull if could install eg. Win 10 mobile and cm13 or stock Asus rom & cm13... Is this only a dream?
Wysłane z mojego ASUS_Z00A przy użyciu Tapatalka

sebx_g1 said:
Looks magic but hmm... it could be usefull if could install eg. Win 10 mobile and cm13 or stock Asus rom & cm13... Is this only a dream?
Wysłane z mojego ASUS_Z00A przy użyciu Tapatalka
Click to expand...
Click to collapse
Windows 10 with CM13 yeah it's a dream but Stock ROM with CM 13 it's possible

I did tests with the roms (bliss, aicp) installing in the data-slot and has no problems on the SIM card or network.

Its again and again giving me this error.....in dual patcher app....i am on echoe rom...

sebx_g1 said:
Looks magic but hmm... it could be usefull if could install eg. Win 10 mobile and cm13 or stock Asus rom & cm13... Is this only a dream?
Wysłane z mojego ASUS_Z00A przy użyciu Tapatalka
Click to expand...
Click to collapse
haha you can , its just we don't have win 10, rest else you can flash up any rom

rex_perfect said:
Its again and again giving me this error.....in dual patcher app....i am on echoe rom...
Click to expand...
Click to collapse
AEL kernel, ask friedrich to name them properly, i.e. Z00A

say99 said:
haha you can , its just we don't have win 10, rest else you can flash up any rom
Click to expand...
Click to collapse
There are few models of China made tablets with dual boot win10 + Android and they are made on Intel chipset 3737F if I remember.. so maybe in future some port will be possible? [emoji9]
Wysłane z mojego ASUS_Z00A przy użyciu Tapatalka

sebx_g1 said:
There are few models of China made tablets with dual boot win10 + Android and they are made on Intel chipset 3737F if I remember.. so maybe in future some port will be possible? [emoji9]
Wysłane z mojego ASUS_Z00A przy użyciu Tapatalka
Click to expand...
Click to collapse
lets just hope for the good

Having tried a 950 XL I can say I would be excited to try windows 10 mobile on our zenfone 2.

Awesome!!! I was waiting for this, thank you!!
I did not understand this:
"SIM related ISSUES : once a ROM is flashed using multiboot and you switch back
to original ROM, SIM 1 does not connects to network"
Example: I have stock rom as primary and Cm13 as secondary. I boot up in Cm13 and when i'm finished I reboot and go in Stock rom. Sim 1 data not working? How do I make it work again?

alekos panagulis said:
Awesome!!! I was waiting for this, thank you!!
I did not understand this:
"SIM related ISSUES : once a ROM is flashed using multiboot and you switch back
to original ROM, SIM 1 does not connects to network"
Example: I have stock rom as primary and Cm13 as secondary. I boot up in Cm13 and when i'm finished I reboot and go in Stock rom. Sim 1 data not working? How do I make it work again?
Click to expand...
Click to collapse
data is far away bro
you dont connect to network on sim 1
make a backup of orignal config partition in twrp, and flash it back when you switch back to primary. this hopefully will work

Related

[CM11 for Cooperve5830i][Discussion]] Thread for CyanogenMod 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great Devs have been working hard for our little device. Hats off to them.
This thread aims to reduce flooding of queries not related to development in dev threads
so as not to hamper their work.
And hopefully not to flood other devices' forums as well.
Let's discuss here, provide logcats if necessary and report bugs to help the developers.
CyanogenMod 11.0 is a free, community built, aftermarket firmware distribution of Android 4.4.4 KK(),
which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions
from many people within the Android community. It can be used without any need to have
any Google application installed. Linked below is a package that has come from another
Android project that restore the Google parts. CyanogenMod does still include various
hardware-specific code, which is also slowly being open-sourced anyway.
From CM11 Dev thread.
Current issues (06/10/2014)
OMX codecs (for accelerated audio/video - may never be solved)
SIM unlock doesn't work (you must remove your SIM lock in another device/ROM)
Video recorder
First-time installation:
Read first posts of DEV Thread:
1.http://forum.xda-developers.com/showthread.php?t=2766229
ClockworkMod v6 is mandatory to install CM11.
Download the latest full OTA build for cooperve from:
RC9: http://download.androidarmv6.org/_builds/cooperve/stable/
Nightlies: http://download.androidarmv6.org/_builds/cooperve/
Quote of dev: psyke83
"IMPORTANT!!! mandatory recovery
update required for cm11 builds later
than 23/07/2014
IMPORTANT!!!
As of 23/07/2014, all CM11 builds for the
bcm21553 series will be switched over to
the MTD flash drivers. In order for these
packages to work correctly, you must first
flash an MTD-compatible recovery (CWM
v6.0.5.2 or later only).
Don't flash the updated recovery until a)
you've backed up your data, b) the CM11
23/07/2014 build (or later) is available,
and c) you're ready to switch to the MTD
build.
How to update to MTD build:
Download an MTD-compatible recovery
(linked below) and a full CM11 OTA build
dated 23/07/2014 (or later).
Perform a full backup using the old
recovery (mandatory!)
Flash the updated recovery, and reboot
into the new recovery.
In the new MTD recovery, perform a data-
wipe, and manually format /system (this
step is critical in order for your partitions
to be properly converted to the mtd/
yaffs2 format - don't ignore it!)
Flash the CM11 package.
Once you've data-wiped and flashed the
initial MTD build, future CM11 updates
can be installed normally (delta or full
packages, as you desire).
Notes:
Older ROMs will no longer be compatible
with the MTD recovery and yaffs2-
formatted partitions. If you wish to use a
stock/modded Gingerbread ROM, CM7 or
CM9, you should wait until MTD versions
of these ROMs become available.
If you want to go back to a non-MTD
ROM, you must flash an entire stock ROM
(CSC+MODEM+PDA) via Odin, or else
your partitions will be stuck in MTD
format."
###_________________
MTD-COMPATIBLE RECOVERY @Post #308 by lesikvip
###_________________
Some Screens:
Full Screenshots: http://forum.xda-developers.com/showthread.php?p=54014189
Gapps link: http://madteam.co/forum/index.php?topic=6285.0
How to update (via OTA):
Please consult the cm-ota instructions on Jenkins.
Summary of major work done:
Forked broadcomCM devices into androidarmv6 repository (forked from ics branches).
Initial changes needed for cm-11.0 have been committed to cooperve, tassve, totoro and bcm21553-common device trees.
All of Broadcom's code has been adapted for the cm-11.0 branch.
After some reverse engineering of the vendor binaries, "adbd" and "init" built from source now work correctly.
ADB will now set the proper USB mode, can give a root shell, and no longer has a hardcoded dependency on /system/bin/sh,
which should help a great deal with debugging. We also no longer need to use the init prebuilt binary - the source-built version
is now compatible.
Implemented common kernel source for totoro, cooperve and tassve.
Implemented hybrid boot/recovery/charge ramdisk.
Fixed WiFi, Bluetooth, Bluetooth tether & mac addresses.
Fixed graphical performance regression on CM11 branch.
Fixed basic audio (speaker, microphone, software encoders/decoders)
Fixed GPS.
Fixed Gallery, wallpaper chooser, live wallpapers, RenderScript, and possible EGL crashes in other apps
Added workaround for SystemUI corruption
Fixed graphical corruption/stability issues (caused by buggy GL_EXT_discard_framebuffer extension)
Fixed RIL, telephony and audio routing to speakers, headset, earpiece, microphone and microphone mute.
* = this code is work in progress, meaning that it won't be available in OTA builds.

IMPORTANT NOTICES from the dev:
psyke83 said:
OK, I managed to fix routing and volume control while in-call. I've merged the changes and started OTA builds for the three devices, so that you can have a build with working telephony. Enjoy!
To see the build status (to know when they will be available from the updater):
totoro: http://jenkins.androidarmv6.org/job/cm-ota/390
tassve: http://jenkins.androidarmv6.org/job/cm-ota/391
cooperve: http://jenkins.androidarmv6.org/job/cm-ota/392
If telephony doesn't work in the tassve or cooperve builds, try updating to the latest baseband. If that still doesn't work, please send me a radio log:
Code:
adb shell logcat -b radio >radio.log
Click to expand...
Click to collapse
psyke83 said:
Folks,
If you're using Link2SD, Mounts2SD, or want a functional app2sd method, keep reading.
These applications are (IMHO) a little too intrusive to be used on my ROM. The main reason is that the apps install their respective mount scripts in a non-optimal location (/system), which can cause problems when you perform ROM upgrades. Link2SD is particularly egregious, because it overwrites a core system file with its script (/system/bin/debuggerd, which is needed by a system service), and this breaks delta updates.
In the past (for CM7), I always favoured S2E on my devices due to it being a much cleaner app2sd implementation, but it had some problems with corruption due to some (IMHO) unnecessary filesystem tweaks. Additionally, S2E doesn't yet support KitKat/CM11. With these issues in mind, I decided to release a fork of the application (called simple2ext_mod), which is focused on maximizing stability and providing support for CM11 ROMs.
I would strongly suggest that you give this app a try. If you're already using Mount2SD or Link2SD, you'll probably have some problems (as they will leave their mount scripts behind). So, it might be a good idea to do a data-wipe beforehand.
Here's the release thread: http://forum.xda-developers.com/android/apps-games/app-simple2extmod-cyanogenmod-11-t2840295
Click to expand...
Click to collapse

Im pretty sure everybody will use the cm7 and cm9 discussion thread for cm11 too.

Someone tried to install some gapps. Official gapps for cm (small version) can't install. Status 7 (with cwm 6).Banks gapps install ok but always fc's
Enviado desde mi GT-I9300 mediante Tapatalk

Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2

yusrilramadhan said:
Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
You need EXT4 flash it on CM 7.

I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
luilly said:
Someone tried to install some gapps
Click to expand...
Click to collapse
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.

lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2

Just wanted to thank the developers for great the work.
I have closed my thread for discussion for cm7/cm9/cm10 so this is the new thread for future.
So best of luck to OP for good maintainence of discussion thread.

cooperve/cm-11-20140707-NIGHTLY-cooperve.zip
does this fix the sim card issue for cooperve?

yusrilramadhan said:
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
No, when you run the sim black screen ..
But the problem with crash on startup with sim solved! Firmware modem part S5360_XXMK1, through Odin.
Addressing 4pda. ru/forum /index.php? showtopic= 585296&view =findpost&p =32722332
Links can not place restrictions on the forum (10 posts)

lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk

Screenshots CM11 [GT-S5830i]
Updating...

Can i put these on first post?
Thanks

patrol31 said:
Can i put these on first post?
Thanks
Click to expand...
Click to collapse
Yes, you can! @patrol31

luilly said:
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk
Click to expand...
Click to collapse
Ggaps up from the usual 5830, here is the link 4pda.ru/forum/index.php?showtopic=531172&view=findpost&p=28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.

Cm 11 is a bit slow but in airplane mode it is fast
in notification bar it shows no internet connection and emergency calls ( blinking)
I think that is why the phone is slow

lesikvip said:
Ggaps up from the usual 5830, here is the link 4pda. ru / forum / index.php? showtopic = 531172 & view = findpost & p = 28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.
Original 4pda. ru/forum/index.php? showtopic=585296& view=findpost&p=32708265
Click to expand...
Click to collapse
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?

Gapps link now provided on the first post.

luilly said:
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?
Click to expand...
Click to collapse
Posted a link to a personal, if you have the opportunity to lay out in the subject as an alternative. Because I have been to most gapps problem.

[ROM][6.0.x][v500][UNOFFICIAL] CyanogenMod 13.0 [20161107]

Bug reports:
Explain how to reproduce the bug and attach logs (logcat and dmesg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs
IR Blaster doesn't work.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) Why is wifi always on in battery stats, even if it was disabled?
A) Go to Settings > Location > press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.

Bootloader
This rom is meant to be used with kitkat bootloader. If you are unsure of what bootloader you are using, you should flash the following zip within recovery (official TWRP recommended):
V50020F Bootloader: https://www.androidfilehost.com/?fid=24352994023707804
* Some stock based roms flash bootloader files without the user being aware of it. So just to be safe, I recommend everybody to flash the above zip to make sure that you are using all the correct bootloader files.

The installation went perfectly on a clean installation.
Huge thanks!

Same here installation is fine. Any way to make my sdcard work without a format?

ukguy115 said:
Same here installation is fine. Any way to make my sdcard work without a format?
Click to expand...
Click to collapse
yes, select portable storage.

Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk

ukguy115 said:
Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Same here.
Sent from my Nexus 6 using Tapatalk

kbluhm said:
Same here.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I had no problems and did not need a reformat using portable storage.

ukguy115 said:
Same here installation is fine. Any way to make my sdcard work without a format?
Click to expand...
Click to collapse
There are two ways you can use your sdcard in marshmallow, as external storage or as emulated internal storage. Only the second one should require to format the sdcard.
ukguy115 said:
Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
kbluhm said:
Same here.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm not sure why this is happening to you. You could try deleting the .android_secure folder in your external sdcard from recovery. That could be the reason why it says your sdcard is corrupt.

And I just did a clean installation of the latest CM12.1 today...
Thanks a lot @fefifofum! Downloading! I guess I'll go to sleep later tonight!

I tried to run Antutu but everytime it stops at 76%.
And adding a profile picture doesn't work.

Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk

ukguy115 said:
Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
You goto keyboard settings and disable from there.

fefifofum said:
There are two ways you can use your sdcard in marshmallow, as external storage or as emulated internal storage. Only the second one should require to format the sdcard.
I'm not sure why this is happening to you. You could try deleting the .android_secure folder in your external sdcard from recovery. That could be the reason why it says your sdcard is corrupt.
Click to expand...
Click to collapse
I too needed to format my sdcard (in portable mode) maybe filesystem related? I had an exfat fs now its fat32.

Installed yesterday. Enjoying now! Just great! Gamma is much better than in the two recent 12.1s.
Can't figure, though, how to make voice input work. There is a mic icon on keyboard... but nothing happens. Can live with that.

Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!

DSC05 said:
Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!
Click to expand...
Click to collapse
So are you using the ROM in this thread? Or are you using cm12.1?

zebinadams said:
So are you using the ROM in this thread? Or are you using cm12.1?
Click to expand...
Click to collapse
CM 13 of this thread and I compared it to latest cm12.1 build of fefifofum

Fenomeno-Tony said:
I tried to run Antutu but everytime it stops at 76%.
And adding a profile picture doesn't work.
Click to expand...
Click to collapse
That's caused by the adreno blobs from flo 6.0 used in this first release. Now I updated them from latest qcom release and the 3d test in antutu doesn't fail anymore. So tomorrow I will release a new build with that issue fixed.
ukguy115 said:
Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
I think that the first issue you mention is an upstream bug, we have to wait for it to get fixed.
Darkmasterhk said:
I too needed to format my sdcard (in portable mode) maybe filesystem related? I had an exfat fs now its fat32.
Click to expand...
Click to collapse
That could be related to android_secure folder in external sdcard, but I need someone to erase it from recovery and confirm if that solves the issue. If that is the case, what I really need to fix is TWRP, which should erase android_secure folder when you do a factory reset.
mackeev said:
Installed yesterday. Enjoying now! Just great! Gamma is much better than in the two recent 12.1s.
Can't figure, though, how to make voice input work. There is a mic icon on keyboard... but nothing happens. Can live with that.
Click to expand...
Click to collapse
Gamma should be exactly the same as in my builds of cm-12.1. About voice input, it's probably an upstream bug too.
DSC05 said:
Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!
Click to expand...
Click to collapse
Maybe the new storage approach used in marshmallow makes the sdcard not to remount automatically, no idea since I don't have unmounts. I'm sure someone else will confirm this in the following days. This post is interesting, you should read it, maybe the easiest workaround is to use a different sdcard. What brand, capacity, class... is the sdcard you are using?

[ROM][VNS-LX1][6.0.1][UNOFFICIAL] AICP for Huawei P9 Lite

Reserved
WORKING/NOT WORKING
-same as CM

Bugs?

How to delete the fingerprint

Does everything work or are there any bugs?

Raymen03 said:
How to delete the fingerprint
Click to expand...
Click to collapse
Settings > Lockscreen > Fingerprint > *Click on your registered fingerprint in the options* > Delete > *click OK*
Thijs van Hal said:
Does everything work or are there any bugs?
Click to expand...
Click to collapse
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)

The Marionette said:
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)
Click to expand...
Click to collapse
How about Bluetooth paring?

Care to elaborate on the difference between this and CM?

Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?

tw1st3d83 said:
Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?
Click to expand...
Click to collapse
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Sent from my VNS-LX1 using Tapatalk

The Marionette said:
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Click to expand...
Click to collapse
Thanks man for fast answer, the flashing will comence in the morning, i need a straight head for this ?
And sa for archive size i did not panic, just been curious because i had AICP on my galaxy s4 and it was half the size...
AICP rom is one of the best out there and it has sooo much customization options that i almost cry with happyness when i saw this post ?
And one more question: do i use ARM or ARM64 version of gapps?

Huawei P9 Lite have to use ARM64

Potato997 said:
Huawei P9 Lite have to use ARM64
Click to expand...
Click to collapse
Yeah,I thought everyone knew that...
Added it as well to the instructions! xD

@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.

Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...

tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Someone on the question and answer thread had the same problem. See if any of his answers helps.
Sent from my Huawei P9 Lite using XDA Labs

oss_mosis said:
@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.
Click to expand...
Click to collapse
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk

The Marionette said:
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk
Click to expand...
Click to collapse
I followed Meticulus instructions first (did all backups and dump) and then i followed your instructions from OP but i come from stock rom, did not try to install Meticulus CM ROM... So now i managed to get past password screen by formating data partition to FAT and then formating it back to ext4 but now when phone boot i get "Decryption unsuccessful" screen and when i click "reset phone" button it reboots in recovery, wipe cache and then boots up back to "Decryption unsuccessful" screen...
I am downloading now Meticulus build to try with that... Will report back soon...
EDIT: I managed to boot AICP!!! By doing this:
First i updated recovery (did not see that Meticulus pushed V2) then i flashed Meticulus CM build but i got "Decryption failed" screen again but this time when i clicked "reset phone" buton the phone just rebooted to TWRP.
Then i did again full harcore wipe and flashed CM with open gapps and the phone booted in to system without problem, from that point i figure that AICP must work now so i rebooted back to TWRP, did another hardcore full wipe, flashed AICP with Open Gapps micro ARM64 version and the phone finaly booted to AICP :happy: :happy: :happy:
Btw i noticed few thing while doing all this... When i first booted CM my SIM card was not recognized but i figured it needs some time to get the signal or wathever but that never hapend and i cheked camera app and in setting of the app i saw that front and back camera was set to full resolution and the photo i took was really in full (13Mpix) resolution... After checking that and few more things i flashed AICP and at first boot my SIM still not working so i figure i will reboot and after second boot the SIM works again but in this ROM front and back camera are set to 2.1mpix (not a problem for me, just saying for ppl to know)...
Now i am going to play with this awesome ROM!
Thanks @The Marionette
EDIT 2: So after few hours of playing with AICP i been forced to go back to stock because my mobile network gone crazy, every 5-10 minutes it disapear and only reboot helps to get connected again and when network disapears the UI get so much lag that is almost unusable...
I can confirm that other things in ROM work as it should, fingerprint, themes, sound bar, navigation bar customization, lcd density, UI animations customizations etc...
Nice work and keep up the good work! ?

So I am running this ROM on my device since yesterday and I really like it. Seems very stable and allows for a lot of modifications.
It drains a lot of battery while listening to music when the device is locked but I also experienced this on the CM ROM.
I am keeping it on my device for now and am looking forward to new updates

Hello @The Marionette,
May I ask you if you plan to update the AICP ROM with the update from CM? Thank you

[MOD] [OFFICIAL] Dual Boot Patcher [SNAPSHOT] [KENZO]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dual Boot Patcher
Supports all Android Versions
(Even MIUI works)
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What is Dual Boot Patcher?
DualBootPatcher is an open-source app that allows multiple ROMs to be installed on a single Android device. It does its best to work with existing code and does not require explicit support from ROMs. There are currently 136 supported devices and their variations.
**I am not the developer of this MOD. The credit for this goes to the actual developer of this MOD.**
Download:
https://dbp.noobdev.io/downloads/
BUGS:
No BOOT UI support yet.
Lock screen shows incorrect pattern every time after installing other ROMs.(Patch below)
**Don't forget to put screen lock to slide or none before booting to other ROMs as it will not allow you to unlock your device on the lock screen after you reboot to another ROM. Even if you enter the correct pattern, it will show that it's wrong(more about the lock screen patch below). Please read the "Lock Screen Patch" Section below before starting the procedure.
Procedure:
Download the APP and the Utilities ZIP from the link.
Install the APP.
Set/Update the kernel when asked.
Choose "Patch Zip File" from the left pane.
Choose "Add flashable zip" by clicking on the "+" button.
Select ROM installation directory in the Partition configuration. (Data Slot/Extsd slot recommended)
Select the location for the patched image file.
Add GAPPS and kernel (more about kernel flashing below) files as needed.
Go to the ROMs section from the left pane and select In App Flashing(bottom right corner).
Choose Add patched file by clicking on the "+" button.
Select the patched Zip files and accordingly select "keep location" or "change location".
Go ahead and flash the ZIPs.
Now you can choose between the installed ROMs and select which one to boot from.
You can also share your apps among your ROMs using the "App Sharing" menu in the left pane.(Note that once you select apps for sharing, the app data will be wiped for those apps once.)
The Utilities ZIP is a flashable zip in the recovery which is based on AROMA installer which provides basic dual boot system modification tools like changing the current boot ROM or wiping a ROM etc. It is very useful when your device is in boot loop or you want to change your boot ROM using the recovery.
YouTube Tutorial:
https://youtu.be/T44ifBaHAWs
MIUI:
As MIUI encrypts data partition, ROMs on it won't be able to boot up.
Follow this guide to make data partition accessable.
Then install other ROMs as usual on the data-slot.
Kernel Flashing:
Flashing ZIPs based on AROMA installer is not allowed via "In App Flashing".
Patch the Kernel ZIPs by selecting the exact installation location of the kernel in the Dual Boot Patcher App.
Then flash the patched ZIPs in the Custom Recovery.
Lock Screen Patch:
Booting to other ROMs might not allow you to unlock your device on your first ROM. Either set your lock to none or swipe or follow the instructions below.
Download Agni Toolbox.
Remove lock screen security.
If your non-primary ROM is locked, then patch the Agni Toolbox and then remove security.
Current Status:
MIUI works but only as primary ROM and only with Alka TWRP recovery.
Contributors:
Dual Boot Patcher Team
Source Code: GitHub
@psndna88 for Agni Toolbox.
@srijansaxena11 for YouTube Tutorial.
Version Information:
Status: Sanpshot
Created: 2016-12-31
Last Updated: 2016-12-31

Review Space

Happy new year guys :fingers-crossed:

Thanks,Need to test This ::good:
Edit: tested working Good for N roms,Thanks for this awesome mod

NVDX11 said:
Thanks,Need to test This ::good:
Edit: tested working Good for N roms,Thanks for this awesome mod
Click to expand...
Click to collapse
MIUI works as primary ?

rocknegi said:
MIUI works as primary ?
Click to expand...
Click to collapse
I think it should. Haven't tested it yet. Will tell you soon. It surely doesn't work as additional ROM as Dual Boot Patcher doesn't create a fake "cust" partition which is necessary to flash an MIUI ROM.

There is some problem with app,whenever i try to flash rom in background as soon as i switch to the app from recents it crashes.
@rocknegi haven't tested Miui,So don't know.

My zip patching don't work always patched zip 0b

NVDX11 said:
There is some problem with app,whenever i try to flash rom in background as soon as i switch to the app from recents it crashes.
@rocknegi haven't tested Miui,So don't know.
Click to expand...
Click to collapse
sarveshrulz said:
My zip patching don't work always patched zip 0b
Click to expand...
Click to collapse
In App Flashing and Patching both won't work in background as the mbtool works only in foreground till now. Keep the app open. The Dual Boot Patcher's background service is still not completely bug free.

vinayak.s19 said:
In App Flashing and Patching both won't work in background as the mbtool works only in foreground till now. Keep the app open. The Dual Boot Patcher's background service is still not completely bug free.
Click to expand...
Click to collapse
I don't close the app its always in foreground while patching

sarveshrulz said:
I don't close the app its always in foreground while patching
Click to expand...
Click to collapse
Please explain in detail about your procedure.
Did you choose any of the Multi Slots as partition configuration?

I can’t make this mod work with MIUI as the primary ROM. When I try to boot a secondary ROM, I always end up in recovery. I tried unofficial LineageOS by minz1 and AOSP by JDCTeam.
Edit: I never had any problems booting back into MIUI. My PIN is still fine.
Edit 2: It might be worth noting that I’m using the latest official Global Developer ROM and ZCX TWRP. Perhaps, it would work with a Xiaomi.EU ROM and the official TWRP.
Edit 3: Nope, it doesn’t work with a Xiaomi.EU ROM either. I also tried using the last CM13 nightly build as a secondary ROM with no luck. So I don’t think it’s possible to use DualBootPatcher with MIUI as the primary ROM. What a pity.

Dual boot patcher for Armani works for MIUI as primary and any other ROM as secondary :3
Maybe see what that dev did

I keep getting 'error code 1' when I try to patch any zip file through the app...Pls help guys.

Filip013 said:
I can’t make this mod work with MIUI as the primary ROM. When I try to boot a secondary ROM, I always end up in recovery. I tried unofficial LineageOS by minz1 and AOSP by JDCTeam.
Edit: I never had any problems booting back into MIUI. My PIN is still fine.
Edit 2: It might be worth noting that I’m using the latest official Global Developer ROM and ZCX TWRP. Perhaps, it would work with a Xiaomi.EU ROM and the official TWRP.
Edit 3: Nope, it doesn’t work with a Xiaomi.EU ROM either. I also tried using the last CM13 nightly build as a secondary ROM with no luck. So I don’t think it’s possible to use DualBootPatcher with MIUI as the primary ROM. What a pity.
Click to expand...
Click to collapse
Use multirom miui 8 as it has system image and probably don't use cust, and in twrp it doesn't shows no os installed while booting so plz try

Save option isn't available
Can't click on it ;_;

rocknegi said:
Save option isn't available
Can't click on it ;_;
Click to expand...
Click to collapse
Your screenshot link is broken. Please fix it.

vinayak.s19 said:
Your screenshot link is broken. Please fix it.
Click to expand...
Click to collapse
See

rocknegi said:
See
Click to expand...
Click to collapse
The image is still not available. Plz add an image, not a thumbnail. If not, then plz upload the screenshot on some cloud storage and share the link of possible.

vinayak.s19 said:
The image is still not available. Plz add an image, not a thumbnail. If not, then plz upload the screenshot on some cloud storage and share the link of possible.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B210VGRWFHRCNl9MWGlWdFlzX3M/view?usp=sharing

[ABANDONED][ROM][PORT][Oreo]MIUI 10 for Mi A1 Epic mod [AROMA]

PROJECT ABANDONED, thanks everybody for trusting me!! See you!
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Do not report bugs to Xiaomi, this is a NON official MIUI rom!
Do not report bugs here if you have not installed step by step according installation instructions!
Previous Nougat miui rom -->: https://forum.xda-developers.com/mi...2-epic-mod-t3842031/post77612030#post77612030
We used xiaomi.eu for port plus some customization from Epic Rom
If you want to stay up to date from Epic roms, join telegram group: https://t.me/epic_roms
What works?
All I have tested
What doesn't ?
-FM Radio no sound
-Miui Sound Enhacer Fixed on 8.12.8
-Stock Camera Fingerprint Shutter Fixed on 8.12.8
-Greenish pictures for third party apps Fixed on 8.12.7
-If you are not familiar with MIUI, do some research before posting a bug, most of bugs reported are MIUI settings related
Features
Android version 8.1.0
Rom built in TWRP (you don't need to flash)
Base xiaomi.eu 9.1.17
Added Epic MIUI Mods such a:
Rooted with magisk 18.0
OTA updates available on 8.9.13 and subsequent
Advanced Reboot
Select rows and columns on launcher
More tiles to UI
Third party theme support
Face unlock
A-GPS extra settings
Pico gapps
Advanced reboot
Tweaks
...
Downloads
ROM:https://sourceforge.net/projects/epic-rom/files/MiA1
Fix for stock MIUI portrait mode: if you are going to use mi account, login into it before install this fix. You can find on app ota_updates/addons
Installation
If you are on stock Pie do not install this Rom, otherwise you can brick your phone. See how to downgrade to stock oreo.
Coming from any rom
1-Back up all your data including efs
2-Wipe data and dalvik/Art
3-Flash Rom zip. first boot takes about 15-20 minutes
4-When system boots up, wait 5 minutes to do initial configuration
5-You will feel system "laguiss" during initial setup, after you complete, wait 5 minutes more and reboot
6-Flash MIUI portrait fix ONLY after log into your Mi account ( skip thius step if you do not use Mi account)
Enjoy MIUI
If system does not boot after 25 minutes:
Fastboot flash userdata with command
Code:
fastboot flash userdata userdata.img
download userdata img from --->https://www.androidfilehost.com/?fid=746163614322263787
Reboot to recovery
Flash MIUI ROM
Continue from step 4
If your storage is less than normal, fastboot flash userdata again and reboot
PD: ota service are not working properly due to a/b partition so, if you download from ota you should install manually once the app reboot to recovery, which means you have to install downloaded rom from internal sd card/OTA_updates folder
Contributors
pocaropa
Manish Pathak (@leetcool), thanks for helping in fixing bugs, it would not have been possible without your help
Xiaomi.eu for base rom used, thanks guys
F.A.Q
Google camera is not working?
Enable hal3 via magisk module or find build.prop line "#persist.camera.HAL3.enabled 1" and delete "#". Reboot.
Is required some specific firmware?
Rom is built in firmware from stock november
How to back to stock?
Restore your TWRP backup
Can I install a custom kernel?
You can install oreo kernels which are suitable for stock rom
When do you update the rom?
When we have free time and I feel like doing it. Please don t ask for ETAs
Can you add x or y feature to the rom? Can you port from x miui rom?
No [emoji14]
VOLTE works?
Yes
Don't ask for porting question, just see old thread, ok?
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like please hit thanks a consider a donation; just open Ota updates app and you will see donate button. This make us motivated, thanks!!

Finally OREO Miui 10 for our Tissot, thank you OP
Sent from my Mi A1 using Tapatalk

Awesome work man :good: :victory:

i updated from previous miui rom. its now asking for a reset and a decryption pa
ssword in recovery what to do?

Gonna download now

After flashing the userdata, the rom start working fine , but my internal storage was 16gb , do the format data > flash magisk v18 > and then reboot system. Stuck at EpicROM splash.
What should i do ?

Can we flash it on a trebilised device?
Since non treble ROMs work on treble devices too , will this rom work??

Thank you so much for your hardwork. MIUI epic rom has been my daily rom since Nougat.
Anyway, I have problem with the slow download link from SourceForge.net, get only around 100KB/s. Any chance for a mirror?

Thank youuu

nakchea said:
Thank you so much for your hardwork. MIUI epic rom has been my daily rom since Nougat.
Anyway, I have problem with the slow download link from SourceForge.net, get only around 100KB/s. Any chance for a mirror?
Click to expand...
Click to collapse
Use 3rd Party Downloader Application (recommended : IDM for Android and Internet Download Manager (i know its not free, but have 30 days trial) for Windows)
Close the page if the download is locked and handled by that 3rd Party Download App
enjoy high speed

YESSS! Stock feels so boring.

PORT the MIUI PIE BASED on pocophone

bagusmfski01 said:
After flashing the userdata, the rom start working fine , but my internal storage was 16gb , do the format data > flash magisk v18 > and then reboot system. Stuck at EpicROM splash.
What should i do ?
Click to expand...
Click to collapse
Try flashed again userdata and reboot. Wait until 35 minutes and report please
Enviado desde mi MI A1 mediante Tapatalk

To Anyone have 16GB storage issue
- Flash the rom first, no matter what userdata are you using
- complete the setup
- Reboot to Fastboot your device (Hold power button > Reboot > Bootloader)
- if you have stock tissot userdata, follow this
1. open fastboot rom (folder, make sure you're already extract the zip and zip)(make sure you have download that)
2. open images folder, then find userdata
3. move that to ADB Installation File
4. type this > fastboot flash userdata userdata.img < (just type the fastboot flash userdata userdata.img)
5. Reboot, by typing fastboot reboot
6. check that, if still not match with your device variant (ex : shows 32GB, but your device is 64GB variant), reflash again
- if you have Mi 5X Userdata, follow steps number 4,5,6 but change the userdata file with your own Mi 5X Userdata

starkproject said:
Use 3rd Party Downloader Application (recommended : IDM for Android and Internet Download Manager (i know its not free, but have 30 days trial) for Windows)
Close the page if the download is locked and handled by that 3rd Party Download App
enjoy high speed
Click to expand...
Click to collapse
Thank you. IDM on Android works great for me, up to 1.6MB/s

Help
Hello, I come from MIUI 7.1.2 Epic Rom 8.11.1, I did all the steps, but it does not start the system, they spend like 25 minutes or less and the cell phone restarts and starts and another 25 and restarts, you know what happens? What I can do?

greenis said:
Hello, I come from MIUI 7.1.2 Epic Rom 8.11.1, I did all the steps, but it does not start the system, they spend like 25 minutes or less and the cell phone restarts and starts and another 25 and restarts, you know what happens? What I can do?
Click to expand...
Click to collapse
Flash userdata.img, reboot to recovery and flash the rom again
Enviado desde mi MI A1 mediante Tapatalk

pocaropa said:
Flash userdata.img, reboot to recovery and flash the rom again
Enviado desde mi MI A1 mediante Tapatalk
Click to expand...
Click to collapse
Done, Now i have this How to fix the 16Gb? Can you help me how can I fix it? :llorando:

greenis said:
Done, Now i have this How to fix the 16Gb? Can you help me how can I fix it? :llorando:
Click to expand...
Click to collapse
See comment #14
Enviado desde mi MI A1 mediante Tapatalk

Thanks Developer for your hard work
I will have a try asap
Already downloaded

Database Develop

welcome