Related
Hi, I'm fresh out here, yesterday my p8 lite wanted to update and updater asked me whether to backup, missed it and clicked Update. I left the phone connected to the charge and went to take care of the job. I heard that a reboot, and, after parunastu minutes wanting to check ocb. To my surprise phone skisł ... Namely it operates LED charging touch running because I feel for answering the call, running sounds, acts unlock, reboot the phone running lights ... BUT DOES NOT WORK SCREEN! Black screen. The phone did not fall, not flooded. Yes, I changed the monitor about 6 month ago because quick burst but still worked all around. You will help in some way? Maybe update is not compatible with a new monitor (because even as scheming). EF level can connect your phone into your computer and downloading the software on a kompa connect to your phone and do the purge? I do not hide that the phone is my second hand base, training materials, virtually all in one place. Help!
Does it show the logo when booting? Will the screen turn on when booting into fastboot? If not, that sounds like a hardware problem
GfIsGonnaKillMe said:
Does it show the logo when booting? Will the screen turn on when booting into fastboot? If not, that sounds like a hardware problem
Click to expand...
Click to collapse
doesn't. after fastboot monitor lights up, i see a black screen (not broken) and then the backlight turns off, black screen, and the phone is on, of course without the screen .... any idea? maybe from the pc and cable do something? only that it requires acceptance on the phone ....
Does "fastboot devices" recognize the mobile then?
GfIsGonnaKillMe said:
Does "fastboot devices" recognize the mobile then?
Click to expand...
Click to collapse
"fastboot devices" you mean my pc?
My pc recognize my mobile.
phone connects to the computer because when connected is "this" sound
Hello ,have you just try to factory reset your device's ?
Factory reset and wipe cache.
If not working, its easy to "unbrick " if your bootloader is unlocked
Sent from my SM-N9005 powered by QS-N9005-LP
dkonect said:
Hello ,have you just try to factory reset your device's ?
Factory reset and wipe cache.
If not working, its easy to "unbrick " if your bootloader is unlocked
Sent from my SM-N9005 powered by QS-N9005-LP
Click to expand...
Click to collapse
I can't do this, my screen do not response... Did you know another tip?
Please Boot into Bootloader and Type fastboot devices
Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
I can help you, just visit my blog
tickernel.tk
Present status
QbaQbaPL said:
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
Click to expand...
Click to collapse
Is it solved? I am also facing same problem.
BiswashKoirala said:
Is it solved? I am also facing same problem.
Click to expand...
Click to collapse
I am facing the same problem as well. Can anybody help pls??
No..I tried few solutions but the phone was still dead. So I bought a new phone.
Bootloader type = Oxygen (not sure if that is the proper one for the device though)
Bootloader lock = Unlocked via Xiaomi official procedure
USB Debug = Not sure, I'm starting to fear it's off though
Original issue = My phone was bricked. No sound, display or whatsoever.
What did I try?
I followed an unbrick tutorial which made me flash an Oxygen firmware file. After that I get a boot loop. Mi logo and Android loading bar appears and seems to be like that continuously.
I can't access either fastboot or recovery mode. If I try any of the two button combinations I don't even get the Mi logo screen. I see the backlight turn on and nothing happens.
I tried flashing several fastboot roms, stock roms and firmware files I could find, flashing them with different versions of MiFlash. Except for the one I described in step 1 none of them change the situation as described in 'Original issue'.
I need to use the 'test pin method' to even let the computer detect the phone in MiFlash. The phone does not get detected inADB fasboot (which makes sense, as I can't enter fastboot mode anyway).
I'm hoping someone can point me in a direction which leads me to fix my phone. I'm not sure what steps I did to even get to the point where it stopped responding in any way. It has been some time ago, but I think I flashed an Oreo firmware file just before that point.
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Esemtix said:
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Click to expand...
Click to collapse
If you find the right points you can get into edl. Did you try a cable already?
Arealhooman said:
If you find the right points you can get into edl. Did you try a cable already?
Click to expand...
Click to collapse
i dont know i connect right point together or not but my phone name changed when connect to pc with xiaomi fastboot installer and i gave my phone to a developer and he install a lot of roms with edl mode ,too but there is no change
Try using edl cable
Arealhooman said:
Try using edl cable
Click to expand...
Click to collapse
i dont need any box tool for use it ?
What do you mean?
Arealhooman said:
What do you mean?
Click to expand...
Click to collapse
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Esemtix said:
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Click to expand...
Click to collapse
Nah it’s k. You still need the right files, but most of the time a edl cable can get you in.
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
Someone told me the phone got hard problem .
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
hi . I tried to flash the phone a lot but still the phone keys light are just on when I connect the phone to charger and when I disconnected it , it is off even when I push power key
what should I do ?
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Tikaram22 said:
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Click to expand...
Click to collapse
Flash again the right firmware.
SubwayChamp said:
Flash again the right firmware.
Click to expand...
Click to collapse
i can't bypass the authentication.
device connected and disconnected itself
Tikaram22 said:
i can't bypass the authentication.
device connected and disconnected itself
Click to expand...
Click to collapse
Follow this guide, replace carefully, the specific files that are for your model device, instead of using those that are for that model based guide, i.e. your firmware https://forum.xda-developers.com/t/...india-6s-using-spflash-tool-for-free.4222027/
Computer is showing the device and mtk auth bypass also shows success and sp flash tool is also showing com port but. when i click on download it shows that STATUS_ERROR (0xC00100001)
Tikaram22 said:
Computer is showing the device and mtk auth bypass also shows success and sp flash tool is also showing com port but. when i click on download it shows that STATUS_ERROR (0xC00100001)
Click to expand...
Click to collapse
Just keep it trying, change the port USB, power off your device, then try again, try a different firmware, flash one file by one. This error uses to appear.
Tikaram22 said:
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Click to expand...
Click to collapse
Probably i had a similar problem.
Does your phone screen stays dark and the phone vibrates shortly each 20 sec? And you don't see any device when connect to PC over USB?
In my case when i held VOL+ and VOL- for a long time, the phone attached to PC shortly for programming.
I followed this manual
https://forum.xda-developers.com/t/x7-max-and-gt-neo-flash-ubrick-instructions.4337339/
and ONLY A15 firmware worked for me! But i had to uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
After that flashing was successful.
AndreyKuz said:
Probably i had a similar problem.
Does your phone screen stays dark and the phone vibrates shortly each 20 sec? And you don't see any device when connect to PC over USB?
In my case when i held VOL+ and VOL- for a long time, the phone attached to PC shortly for programming.
I followed this manual
https://forum.xda-developers.com/t/x7-max-and-gt-neo-flash-ubrick-instructions.4337339/
and ONLY A15 firmware worked for me! But i had to uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
After that flashing was successful.
Click to expand...
Click to collapse
Phone didn't vibrates. Now the phone is defects on pc and auth bypass also works. But when I click on download the device disconnected itself.
Tikaram22 said:
Phone didn't vibrates. Now the phone is defects on pc and auth bypass also works. But when I click on download the device disconnected itself.
Click to expand...
Click to collapse
Usually you have only ~10sec between auth bypass and phone disconnect... It is necessary to do fast: open the options in SP Flash Tool, select the COM port, then click 'Download'.
Auth bypass is trying to bypass but. It said time out. 30000
Tikaram22 said:
Auth bypass is trying to bypass but. It said time out. 30000
Click to expand...
Click to collapse
Maybe it is necessary to hold Vol+ and Vol- longer until the auth tool finishes
Tikaram22 said:
Auth bypass is trying to bypass but. It said time out. 30000
Click to expand...
Click to collapse
So, your phone is not charging. Did you play with partitions? Or bootloader?
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Tikaram22 said:
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Click to expand...
Click to collapse
Tikaram22 said:
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Click to expand...
Click to collapse
Your device is xiaomi right? Plug your phone to charger for couple of hours.Then, try pressing VOL UP, DOWN keys to get into recovery or fastboot mode while the charger is connected. You will be able to put your phone in fastboot mode i guess.
Flash the boot image and recovery image through ADB. Did you unlock the bootloader? Can you please tell me the model of your device?
Goddamn_srilankan said:
Your device is xiaomi right? Plug your phone to charger for couple of hours.Then, try pressing VOL UP, DOWN keys to get into recovery or fastboot mode while the charger is connected. You will be able to put your phone in fastboot mode i guess.
Flash the boot image and recovery image through ADB. Did you unlock the bootloader? Can you please tell me the model of your device?
Click to expand...
Click to collapse
No brother it's realme x7 max. Display is only black. Can't trun on. Hard break
Tikaram22 said:
No brother it's realme x7 max. Display is only black. Can't trun on. Hard break
Click to expand...
Click to collapse
Did you try some of the guides provided? It is not that hard to set up the drivers to can bypass the SLAA/DAA restriction, also you have other forum explaining how it works https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/ there are various sites speaking about it, you have to keep it trying.
Can you enter to recovery, or fastboot mode? (this is done through stock recovery), I know you can't turn on the device, so you're bricked, but you have to try other modes, this will give you the certainty that device is not totally bricked, but only display is not showing a thing? When you try the various modes available, check on device manager from Windows, to see if the device is detected properly, open it in a part of your screen while you are trying.
SubwayChamp said:
Did you try some of the guides provided? It is not that hard to set up the drivers to can bypass the SLAA/DAA restriction, also you have other forum explaining how it works https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/ there are various sites speaking about it, you have to keep it trying.
Can you enter to recovery, or fastboot mode? (this is done through stock recovery), I know you can't turn on the device, so you're bricked, but you have to try other modes, this will give you the certainty that device is not totally bricked, but only display is not showing a thing? When you try the various modes available, check on device manager from Windows, to see if the device is detected properly, open it in a part of your screen while you are trying.
Click to expand...
Click to collapse
Didn't work. I think the partition had been damaged.
I shoud buy new motherboard
Tikaram22 said:
Didn't work. I think the partition had been damaged.
I shoud buy new motherboard
Click to expand...
Click to collapse
But what you have from the device?, some advice/warning. What you can do and what not? If the device shows some signal of life, and it is recognized for your PC, then you shouldn't replace it.
You just have to step in every of the ways.
I
SubwayChamp said:
But what you have from the device?, some advice/warning. What you can do and what not? If the device shows some signal of life, and it is recognized for your PC, then you shouldn't replace it.
You just have to step in every of the ways.
Click to expand...
Click to collapse
Have followed but not successed.
Sending to Sevice center soon