i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Tikaram22 said:
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Click to expand...
Click to collapse
Flash again the right firmware.
SubwayChamp said:
Flash again the right firmware.
Click to expand...
Click to collapse
i can't bypass the authentication.
device connected and disconnected itself
Tikaram22 said:
i can't bypass the authentication.
device connected and disconnected itself
Click to expand...
Click to collapse
Follow this guide, replace carefully, the specific files that are for your model device, instead of using those that are for that model based guide, i.e. your firmware https://forum.xda-developers.com/t/...india-6s-using-spflash-tool-for-free.4222027/
Computer is showing the device and mtk auth bypass also shows success and sp flash tool is also showing com port but. when i click on download it shows that STATUS_ERROR (0xC00100001)
Tikaram22 said:
Computer is showing the device and mtk auth bypass also shows success and sp flash tool is also showing com port but. when i click on download it shows that STATUS_ERROR (0xC00100001)
Click to expand...
Click to collapse
Just keep it trying, change the port USB, power off your device, then try again, try a different firmware, flash one file by one. This error uses to appear.
Tikaram22 said:
i was trying to downgrade by using sp flash tool, in this process the sp flash tool shows error file not found. and now the mobile goes to black screen only. it wont turn or even charged. Please Help me Thank you.
Click to expand...
Click to collapse
Probably i had a similar problem.
Does your phone screen stays dark and the phone vibrates shortly each 20 sec? And you don't see any device when connect to PC over USB?
In my case when i held VOL+ and VOL- for a long time, the phone attached to PC shortly for programming.
I followed this manual
https://forum.xda-developers.com/t/x7-max-and-gt-neo-flash-ubrick-instructions.4337339/
and ONLY A15 firmware worked for me! But i had to uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
After that flashing was successful.
AndreyKuz said:
Probably i had a similar problem.
Does your phone screen stays dark and the phone vibrates shortly each 20 sec? And you don't see any device when connect to PC over USB?
In my case when i held VOL+ and VOL- for a long time, the phone attached to PC shortly for programming.
I followed this manual
https://forum.xda-developers.com/t/x7-max-and-gt-neo-flash-ubrick-instructions.4337339/
and ONLY A15 firmware worked for me! But i had to uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
After that flashing was successful.
Click to expand...
Click to collapse
Phone didn't vibrates. Now the phone is defects on pc and auth bypass also works. But when I click on download the device disconnected itself.
Tikaram22 said:
Phone didn't vibrates. Now the phone is defects on pc and auth bypass also works. But when I click on download the device disconnected itself.
Click to expand...
Click to collapse
Usually you have only ~10sec between auth bypass and phone disconnect... It is necessary to do fast: open the options in SP Flash Tool, select the COM port, then click 'Download'.
Auth bypass is trying to bypass but. It said time out. 30000
Tikaram22 said:
Auth bypass is trying to bypass but. It said time out. 30000
Click to expand...
Click to collapse
Maybe it is necessary to hold Vol+ and Vol- longer until the auth tool finishes
Tikaram22 said:
Auth bypass is trying to bypass but. It said time out. 30000
Click to expand...
Click to collapse
So, your phone is not charging. Did you play with partitions? Or bootloader?
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Tikaram22 said:
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Click to expand...
Click to collapse
Tikaram22 said:
I was trying to flash device. Suddenly light goes my pc shutdown in middle of flashing. Now this problem happens when I try to flash
Click to expand...
Click to collapse
Your device is xiaomi right? Plug your phone to charger for couple of hours.Then, try pressing VOL UP, DOWN keys to get into recovery or fastboot mode while the charger is connected. You will be able to put your phone in fastboot mode i guess.
Flash the boot image and recovery image through ADB. Did you unlock the bootloader? Can you please tell me the model of your device?
Goddamn_srilankan said:
Your device is xiaomi right? Plug your phone to charger for couple of hours.Then, try pressing VOL UP, DOWN keys to get into recovery or fastboot mode while the charger is connected. You will be able to put your phone in fastboot mode i guess.
Flash the boot image and recovery image through ADB. Did you unlock the bootloader? Can you please tell me the model of your device?
Click to expand...
Click to collapse
No brother it's realme x7 max. Display is only black. Can't trun on. Hard break
Tikaram22 said:
No brother it's realme x7 max. Display is only black. Can't trun on. Hard break
Click to expand...
Click to collapse
Did you try some of the guides provided? It is not that hard to set up the drivers to can bypass the SLAA/DAA restriction, also you have other forum explaining how it works https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/ there are various sites speaking about it, you have to keep it trying.
Can you enter to recovery, or fastboot mode? (this is done through stock recovery), I know you can't turn on the device, so you're bricked, but you have to try other modes, this will give you the certainty that device is not totally bricked, but only display is not showing a thing? When you try the various modes available, check on device manager from Windows, to see if the device is detected properly, open it in a part of your screen while you are trying.
SubwayChamp said:
Did you try some of the guides provided? It is not that hard to set up the drivers to can bypass the SLAA/DAA restriction, also you have other forum explaining how it works https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/ there are various sites speaking about it, you have to keep it trying.
Can you enter to recovery, or fastboot mode? (this is done through stock recovery), I know you can't turn on the device, so you're bricked, but you have to try other modes, this will give you the certainty that device is not totally bricked, but only display is not showing a thing? When you try the various modes available, check on device manager from Windows, to see if the device is detected properly, open it in a part of your screen while you are trying.
Click to expand...
Click to collapse
Didn't work. I think the partition had been damaged.
I shoud buy new motherboard
Tikaram22 said:
Didn't work. I think the partition had been damaged.
I shoud buy new motherboard
Click to expand...
Click to collapse
But what you have from the device?, some advice/warning. What you can do and what not? If the device shows some signal of life, and it is recognized for your PC, then you shouldn't replace it.
You just have to step in every of the ways.
I
SubwayChamp said:
But what you have from the device?, some advice/warning. What you can do and what not? If the device shows some signal of life, and it is recognized for your PC, then you shouldn't replace it.
You just have to step in every of the ways.
Click to expand...
Click to collapse
Have followed but not successed.
Sending to Sevice center soon
Related
So as you may already be aware phones like mine, (orange uk) have the fastboot locked down, and so we cant unlock the bootloader.
I for one believe it can be accessed but needs a little bit of time and research on getting it done.
This thread is aimed for brain-storming for ideas and collecting them for us to try out,
You can de-brand your phone by flashing the software from this thread
http://forum.xda-developers.com/showthread.php?t=1033193
thanks to scott4 for the first upload mirror on page 3
Any ideas on getting the bootloader up and going on locked devices please put them in here
UPDATES
We now have root access thanks to Chainfire's gingerbreak apk which is here
http://forum.xda-developers.com/showthread.php?t=1044765
If your getting "could not extract assets" from gingerbreak
try doing
xperiax10.awesome said:
cool, finally I rooted my xperia ARC
these are very simple steps(copied from different threads):
1. Install the attached apk: Gingerbreak-v1.00
after installing most people getting this error - "could not extract assets".
TO OVERCOME THIS, just copy the attached ADB.zip and extract it on your laptop (windows)
say at
E:\mobile_Xperia\ADB
goto above path in your cmd promt and types these lines (your phone should be connected to laptop in debugging mode)
E:\mobile_Xperia\ADB>adb shell rmdir /data/local/tmp
E:\mobile_Xperia\ADB>adb shell mkdir /data/local/tmp
NOW JUST INSTALL THE apk file again and click on ROOT
Click to expand...
Click to collapse
if that Fails try replacing it with rm -r /data/local/tmp
Update 2
Blagus has kindly opened up this thread here
http://forum.xda-developers.com/showthread.php?t=1063394
We need people with a SIM-FREE phone with a LOCKED bootloader to help us all out, so if thats YOU !!!
Help us poor sods with branded handsets please.
UPDATE 3
Blagus Has come out with his release (As the man who can)
Blagus said:
Omnius for SE v0.23 (30th August 2011)
Added unlocking of S1 MSM7x30 GSM/UMTS phones (testpoint connection to GND is required.)
Added bootloader unlocking for S1 MSM7x30 phones
Anyone who donated (+punk... sorry forgot username, the OP ), contact me for free unlock.
For rest, contact for price (cheaper than at official Omnius resellers).
Click to expand...
Click to collapse
You can contact him here http://forum.xda-developers.com/member.php?u=2645841
Instructions
TESTPOINT INSTRUCTIONS PROVIDED BY mooxie FROM XDA FORUM:
1 turn of the phone
2 take of the backcover
3 remove the battery and sim card
4 take of the plastic covering the test point it's a bit stuck there but the gentle if you can.
5 Find something flexible like a wire or so i used steel wire. Make bend it so you easily can put it on the test point and the ground since you need to hold it there and press the powerbutton in the next step.
6 put in the battery
7 put the wire on the test point and the ground keep it there and press the power button for a few seconds. You wont get any confirmation that it suceeded.
8 Plug in the usb cable in the phone. Windows will now search for a new driver.
If it doesn't install automaticly. Go into the device manager of windows and look up something called SEMC_HUBB think it was that name. Choose update driver and browse to your omnius\driver folder. You will get a warning that the driver isn't signed but press okay and it should install.
9 Now if everything is done right the flashing will start and you should soon have an unlocked phone
Also side note i had problems with
qhsusb_dload driver not installing correctly.
if this is your case right click update and point to the omnius folder and choose update. worked for me.
Have you tried connecting via ADB, and running the command "adb reboot fastboot"?
dh2311 said:
Have you tried connecting via ADB, and running the command "adb reboot fastboot"?
Click to expand...
Click to collapse
What does this command does beside going to the fastboot?
Rithina said:
What does this command does beside going to the fastboot?
Click to expand...
Click to collapse
Well if we can get into fastboot we can unlock the kernal, for the people stuck with not being able to do the normal way
dh2311 said:
Have you tried connecting via ADB, and running the command "adb reboot fastboot"?
Click to expand...
Click to collapse
Reboots back up as normal, also did adb devices and it was there,
Have you tried removing the simlock?
MarylandCookie said:
Have you tried removing the simlock?
Click to expand...
Click to collapse
No not sure how to do it for free, i think someone with a Japaneses version has removed it, i will PM him to ask him
Here's a thought: backup TA. Write random values to security area. If fastboot is disabled/enabled depending on TA simlock info, tampered sec. zone could give you fastboot. Then unlock bootloader and in order to get your phone back to life, restore TA.
Method should be 100% safe as long as you can write TA back.
Sent from my X8 using XDA App
Tampered units wont let the phone boot.
lollylost100 said:
Tampered units wont let the phone boot.
Click to expand...
Click to collapse
But what about flash mode and fastboot? I know they won't boot but that's why in the end TA is restored.
so now all you crazy kids with unlocked phones have root I dont suppose anyone has any more ideas about this problem do they?
I have a few more ieas;
1) I presume you have also tried
adb reboot bootloader
I haven't got my arc yet, Im just saying old ways of getting DHD into bootloader/fastboot
2)
Also, what i think was being mentioned above, Im not too sure what was being said, but on advent vega's and optimus 2x's if you wiped the boot partition, it rebooted into fastboot, because there was no OS installed.
3)
Another one to try is look for market apps that offer reboot into recovery type options and see if they work
have you tried booting your device using the S1 BOOTLOADER method and the S1 DOWNLOAD method? (power off, hold menu + plug battery, then plug cable in pc) you should see a blue LED light. (power off, hold back key + plug battery, then plug cable in pc) you should see a green LED light.
try these two methods and give us a feedback
kazuni said:
have you tried booting your device using the S1 BOOTLOADER method and the S1 DOWNLOAD method? (power off, hold menu + plug battery, then plug cable in pc) you should see a blue LED light. (power off, hold back key + plug battery, then plug cable in pc) you should see a green LED light.
try these two methods and give us a feedback
Click to expand...
Click to collapse
manage to get Green light to come up, and it installs drivers
SEMC Flash Devices installs as the drivers,
After the installation of the new drivers still no blue light
adb reboot bootloader just reboots as normal
Hi !
For me, first method makes my phone booting normaly (no led light).
With the second one, it's OK : green led light appears.
If i can help...
PS : my PC doesn't want to install drivers :-(
punkmonkey1984 said:
manage to get Green light to come up, and it installs drivers
SEMC Flash Devices installs as the drivers,
After the installation of the new drivers still no blue light
Click to expand...
Click to collapse
so that means SEMC Flash is available. Try using Flashtool and flash a UK/Global firmware, and see if it works =)
Skyseb said:
Hi !
For me, first method makes my phone booting normaly (no led light).
With the second one, it's OK : green led light appears.
If i can help...
PS : my PC doesn't want to install drivers :-(
Click to expand...
Click to collapse
Download SEUS. PC Companion doesn't install the right drivers.
kazuni said:
so that means SEMC Flash is available. Try using Flashtool and flash a UK/Global firmware, and see if it works =)
Click to expand...
Click to collapse
Already flashed global firmware,
Still locked,
I guess the lock is actually in the bootloader level, which can't be overridden by writing a ftf package.
Sorry, but no other ideas at the moment =\
??? Have you seen this post ? => http://forum.xda-developers.com/showpost.php?p=13064854&postcount=420
Edit : ok, forget it...
Sorry.
i have probably bricked my phone . not booting up. doesn't even charge. can't boot to recovery as well. now i am trying to unbrick it using sp flash tool but it isn't happening. the phone keeps on connecting and disconnecting. i can see it is being recognized as mt65xx pre loader in device manager and when i click download in sp flash tool it just gets stuck nothing happens. help:crying::crying::crying:
konankiakshay said:
i have probably bricked my phone . not booting up. doesn't even charge. can't boot to recovery as well. now i am trying to unbrick it using sp flash tool but it isn't happening. the phone keeps on connecting and disconnecting. i can see it is being recognized as mt65xx pre loader in device manager and when i click download in sp flash tool it just gets stuck nothing happens. help:crying::crying::crying:
Click to expand...
Click to collapse
@konankiakshay,
you should press download button first, and after that you should connect your phone.
Hope this helps.
Utkarsh_Tiwari said:
@konankiakshay,
you should press download button first, and after that you should connect your phone.
Hope this helps.
Click to expand...
Click to collapse
yes i know that buddy. the phone is connecting and disconnecting and the flashing process doesn't even start in sp flash tool.
konankiakshay said:
yes i know that buddy. the phone is connecting and disconnecting and the flashing process doesn't even start in sp flash tool.
Click to expand...
Click to collapse
bro, you haven't installed the drivers for your phone.
Install tinno preloader drivers (just google it & you'll find), and repeat the process.
thank you for commenting mate. got it back to life.
konankiakshay said:
thank you for commenting mate. got it back to life.
Click to expand...
Click to collapse
Bro where did u find the preloader drivers.
Bootloader type = Oxygen (not sure if that is the proper one for the device though)
Bootloader lock = Unlocked via Xiaomi official procedure
USB Debug = Not sure, I'm starting to fear it's off though
Original issue = My phone was bricked. No sound, display or whatsoever.
What did I try?
I followed an unbrick tutorial which made me flash an Oxygen firmware file. After that I get a boot loop. Mi logo and Android loading bar appears and seems to be like that continuously.
I can't access either fastboot or recovery mode. If I try any of the two button combinations I don't even get the Mi logo screen. I see the backlight turn on and nothing happens.
I tried flashing several fastboot roms, stock roms and firmware files I could find, flashing them with different versions of MiFlash. Except for the one I described in step 1 none of them change the situation as described in 'Original issue'.
I need to use the 'test pin method' to even let the computer detect the phone in MiFlash. The phone does not get detected inADB fasboot (which makes sense, as I can't enter fastboot mode anyway).
I'm hoping someone can point me in a direction which leads me to fix my phone. I'm not sure what steps I did to even get to the point where it stopped responding in any way. It has been some time ago, but I think I flashed an Oreo firmware file just before that point.
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Esemtix said:
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Click to expand...
Click to collapse
If you find the right points you can get into edl. Did you try a cable already?
Arealhooman said:
If you find the right points you can get into edl. Did you try a cable already?
Click to expand...
Click to collapse
i dont know i connect right point together or not but my phone name changed when connect to pc with xiaomi fastboot installer and i gave my phone to a developer and he install a lot of roms with edl mode ,too but there is no change
Try using edl cable
Arealhooman said:
Try using edl cable
Click to expand...
Click to collapse
i dont need any box tool for use it ?
What do you mean?
Arealhooman said:
What do you mean?
Click to expand...
Click to collapse
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Esemtix said:
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Click to expand...
Click to collapse
Nah it’s k. You still need the right files, but most of the time a edl cable can get you in.
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
Someone told me the phone got hard problem .
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
hi . I tried to flash the phone a lot but still the phone keys light are just on when I connect the phone to charger and when I disconnected it , it is off even when I push power key
what should I do ?
I made a mistake while I was flashing a custom ROM PixelPlus UI in my device Redmi 9
after seccessfully flashing it I locked the bootloader and now my doesn't turn on either going in fastboot mood.I need help to fix it..plz plz plz
Hi, make sure that your battery is full, then hold VOl + and power key together and connect USB cable and see if is detected. The other things is to flash with edl mode but you need testpoint and flash tool like MRT... See over the internet for your model...
Vol+ and power key doesn't shows any sign.
Try then with VOl - and power but keep pressing and plug usb cable, if that doesn't work you need edl flashing....
Does edl supports in MTK processores?
Hi, sorry I mixed your device with Mi 9 model.... For MTK chipset you need BROM mode, so try to hold both VOL + and VOL - and plug usb cable and see if is detected... If it doesn't then send your device to nearby service center in order to flash with service box...
It shows something in ports......and few seconds later it goes away.
Good sign, then follow this flashing... use only if you have same chipset!
Mine is Mediatek G80 / MTK6769
Download Redmi 9 tested Flash File Firmware No Auth 100% Free
Download Redmi 9 tested Flash File Firmware No Auth Firmware Flash by using the SP Flash tool, 100% Free without Authorized MI account
romprovider.com
Do research....
i am trying but the port driver is still disconnecting...it doesnt stays stable
AlJabir001 said:
i am trying but the port driver is still disconnecting...it doesnt stays stable
Click to expand...
Click to collapse
Have your issue resolve and if so what exactly have you done, one of my friend done the same and facing the issue.
You are screwed if you locked the bootloader. Nothing you can do. At all.
AlJabir001 said:
i am trying but the port driver is still disconnecting...it doesnt stays stable
Click to expand...
Click to collapse
use the bypass_flashtool
bypass_flashtool_driver.rar
drive.google.com
YashxOS said:
bypass_flashtool_driver.rar
drive.google.com
Click to expand...
Click to collapse
go to bypass and run the brom.bat if on windows
conect the device it will regenizi it and force it to be stable
here a guide https://forum.xda-developers.com/t/...-etc-from-a-hard-brick.4535709/#post-87924847
YashxOS said:
here a guide https://forum.xda-developers.com/t/...-etc-from-a-hard-brick.4535709/#post-87924847
Click to expand...
Click to collapse
Thanks but issue has already been resolved using some tool provided on YouTube to unlock bootloader
navrkr said:
Thanks but issue has already been resolved using some tool provided on YouTube to unlock bootloader
Click to expand...
Click to collapse
oh ok when done put the [sovled]
Hi Guys,
I really need help with this one. I have tried almost everything.
Here is my problem.
I have an Rog phone 3 strix edition QUALCOMM based.
I repaired the screen because i dropped the phone.
Everything was fine working well. Me with my big head decided to do an factory reset to wipe everything clean from the phone and then the problem started.
The phone was restarting every time i plugged in a usb c cable. If i wanted to listen to some music on headset wont work because it will end in a bootloop.
Now the phone is stuck in CSC Fastboot mode and PC wont recognized it. The screen will turn on and send me to CSC fastboot but that's it. I can turn it back off.
Can i Revive the phone or is it food for the recycling bin?
Please Help.
Sincerely,
Ayolyas
With some effort you should be able to get back on track - unless it's hardware related to the display change you've done.
Can you do a reboot to bootloader from the boot menu? If you can confirm if you have fastboot access. If you do, RAW flash the device.
Worst case, you force the device into EDL mode and do a flash from there, but leave at as the last option.
If the relpaced display is causing harware issues, that's a bigger problem...
Hi Andrologic,
I cannot reboot to the bootloader. I am stuck in csc fastboot. I was trying to put it in edl mode i even bought an edl cable. But i have no idea how to use it or how to put the phone in edl.
I went back to the repair shop but the phone was working fine when it left the phone shop. The problem started when i decided to go for factory reset.
ayolyas said:
Hi Andrologic,
I cannot reboot to the bootloader. I am stuck in csc fastboot. I was trying to put it in edl mode i even bought an edl cable. But i have no idea how to use it or how to put the phone in edl.
I went back to the repair shop but the phone was working fine when it left the phone shop. The problem started when i decided to go for factory reset.
Click to expand...
Click to collapse
So, when you turn on the device, it falls into CSC FB and you can't navigate anywhere at all from there?
What happens if you try to do a RAW flash from CSC FB?
Flashing it in EDL mode may otherwise be the only option. Power off the device completely. Then hold Vol up+down pressed and connect to the USB side port. You should land with a completely black screen and on your pc see the device identified in 9008 mode - that's EDL. Since you have a flash cable, you can obviously use that too.
Remember you need Qualcom drivers installed to work in EDL mode. There is a guide with steps for EDL flashing somewhere here on the forum. All the steps are explained.
Andrologic said:
So, when you turn on the device, it falls into CSC FB and you can't navigate anywhere at all from there?
What happens if you try to do a RAW flash from CSC FB?
Flashing it in EDL mode may otherwise be the only option. Power off the device completely. Then hold Vol up+down pressed and connect to the USB side port. You should land with a completely black screen and on your pc see the device identified in 9008 mode - that's EDL. Since you have a flash cable, you can obviously use that too.
Remember you need Qualcom drivers installed to work in EDL mode. There is a guide with steps for EDL flashing somewhere here on the forum. All the steps are explained.
Click to expand...
Click to collapse
I cannot navigate anywhere from csc. If i try to reboot bootloader i will end in the same place.
I try to connect like you told me Vol up + down but i ended up at the same place. An raw flash from csc fb how do i do that?
And the steps for edl if you can help where to find those steps because my google history is full off items and still no luck finding the right one.
ayolyas said:
I cannot navigate anywhere from csc. If i try to reboot bootloader i will end in the same place.
I try to connect like you told me Vol up + down but i ended up at the same place. An raw flash from csc fb how do i do that?
And the steps for edl if you can help where to find those steps because my google history is full off items and still no luck finding the right one.
Click to expand...
Click to collapse
Yes, you have flash cable, so getting into EDL shouldn't be an issue any way.
This is a useful video on how to use your flash cable to force the device to EDL:
Just remember you need QCom drivers installed to flash in EDL mode, the normal drivers won't do it in EDL.
What is the device identified as on your PC when in CSC FB? Can you send any FB commands to the device at all? Does 'Fastboot Devices' return your device id? If so, try first to do a RAW flash from the Fastboot state you are stuck at. You don't really want to mess with EDL if you can avoid it. Download one of the RAW rom's from the links here on the forum. Version number doesn't matter as long as it matches with your device version, i.e. WW assuming you're on Global.
ayolyas said:
Hi Guys,
I really need help with this one. I have tried almost everything.
Here is my problem.
I have an Rog phone 3 strix edition QUALCOMM based.
I repaired the screen because i dropped the phone.
Everything was fine working well. Me with my big head decided to do an factory reset to wipe everything clean from the phone and then the problem started.
The phone was restarting every time i plugged in a usb c cable. If i wanted to listen to some music on headset wont work because it will end in a bootloop.
Now the phone is stuck in CSC Fastboot mode and PC wont recognized it. The screen will turn on and send me to CSC fastboot but that's it. I can turn it back off.
Can i Revive the phone or is it food for the recycling bin?
Please Help.
Sincerely,
Ayolyas
Click to expand...
Click to collapse
Have you fix it?
osomakohj said:
Have you fix it?
Click to expand...
Click to collapse
Hi,
Nope. I can get into EDL mode so i think it is hardware related. You can say it is fresh for the garbage.
ayolyas said:
Hi,
Nope. I can get into EDL mode so i think it is hardware related. You can say it is fresh for the garbage.
Click to expand...
Click to collapse
maybe try edl cable maybe it'll work? its very cheap in online store
osomakohj said:
maybe try edl cable maybe it'll work? its very cheap in online store
Click to expand...
Click to collapse
I did use a EDL cable and i also build one but no succes for both.
ayolyas said:
I did use a EDL cable and i also build one but no succes for both.
Click to expand...
Click to collapse
Hope you did the proper way of entering edl mode. btw you can still send that to service center. but first try some other way as your phone still boot