Database Develop

QHSUSB_Bulk mode help

Hello everyone.
I know there is a user who asked, but no answers given to him in 2014, now in 2016 I'm asking again.
Last night was doing downgrade in my XT1069 Android BR 6.0 to 4.4.4 factory, so far so good, worked normal. From the moment I was installing the OTA's, when arrived at the time of the OTA 22:21:28, finishing the process, the phone does not start, I believe that corrupted the bootloader.
Recognizes "qhsusb-bulk" as "Qualcomm HS-USB QDLoader 9008".
After so see that this is common, and it's hard to find a "programmer.mbn" compatible, I wonder if there is a solution, without having to replace the motherboard?
I took a look at "QPST program", "flashblank", "qboot" but unfortunately walked working with who has the "Moto X" and some users "Moto G 2013".
Is there any way back up the eMMC from another device?

Welcome to the hard bricked Moto G 2014 club!
We need a "blank flash" image to unbrick our Moto G 2014, but Motorola doesnt want to release it
There is a lot of people that have the same problem, atm there is no solution unfortunately

http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Ma.Style10 said:
Hello everyone.
Is there any way back up the eMMC from another device?
Click to expand...
Click to collapse
plz notify me if it works..

c_/\/\_k said:
plz notify me if it works..
Click to expand...
Click to collapse
unfortunately it does not work
looking for solution...

c_/\/\_k said:
plz notify me if it works..
Click to expand...
Click to collapse
Unfortunately it does not work on Moto G 2014.
I saw this page, until it seems to work, but unfortunately the motorola does not release the programmer.mbn compatible with "blankflash", "qboot", "QPST", anyway.

Moto G 2nd Gen ( XT1068) hard bricked: neither turning on, nor opened by blankflash

One morning i restarted my phone( Moto G 2nd gen.) with Android Marshmallow because it went slow, but after that it restarted in fastboot mode when i pressed the power on button. Normal startup or recovery were also not working.
I checked this forum, then unlocked the bootloader and downgraded to Android 4.4.4 . My phone operated well, then at night it started asking for lollipop update again and again, i allowed for OTA update (that was my biggest mistake), and after downloading the data and during update, my phone went off and didn't start again.
Although the indicator light glows solid for sometime when connected to wall charger or to PC via USB cable.
I have tried blankflash, ADB and fastboot utility, Volume down + Power combination, pressing power button for over 120 seconds, but all in vain.....
Please suggest me a way to solve this problems, i have important data in my phone and i want to save those too.

Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones

Feel blessed, you don't have to use moto g anymore.

Anniepoo said:
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Click to expand...
Click to collapse
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?

aninishu said:
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
Click to expand...
Click to collapse
. I wish I could say it was, but unfortunately Motorola won't release this file. There have been some serious attempts to solve this problem but none have succeeded.. As far as I know the only way to fix this problem is by getting a new motherboard..

Hellow
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer

Diego799 said:
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Click to expand...
Click to collapse
no blankflash.zip for our model available
if you are from india then you can try out this solution for xt1068 by an guy mobile unbrick something contact him but remember it will be paid not free
Code:
https://www.youtube.com/watch?v=WynBaVyW0oU
if you from another region then need to wait for blank flash zip

There are some methods to extract the partition layouts...one can be using dd cloning & extracting img files...another can be through B2bSupportLg Tool, also calleld BoardDiag. It does have MSM8226 chipset option, but that device is W7 G2MDS. Take a working Moto G 2014 from someone, ask them to use this tool to extract the partition schemes, then you'll get .mbn files, especially prog_emmc_filehorse_msm8226.mbn . Use that to dump into the bricked device using either QFIL Tool or use this blankflash tool, replace it's singleimage files with the one you got, then execute blank-flash.bat.
Also I had some emmc prog firehorse files, all 4 related to 8x26...You can try those & confirm me if they work or not

Help Please my nexus 6 stuck on fastboot

help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
​

Slow down...
Give some (as much as possible really) details as to what you've done to end up where you are.
Preferably in a normal non-centered text because what you've done there is hard on the eyes (read: annoying) and almost put me off answering...

Prince_Eugen said:
help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
​
Click to expand...
Click to collapse
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.

zelendel said:
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.
Click to expand...
Click to collapse
ok thaks but what should i do now ?

Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.

Strephon Alkhalikoi said:
Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.
Click to expand...
Click to collapse
wake up found it stuck in bootloader i didnt do anything
i cant flash rom or do any thing

If you have no ROM, cannot enter recovery, and did nothing to bring this state of affairs about, your phone most likely has a dead EMMC storage chip. You can verify this by trying to flash a stock ROM using the fastboot command, but be aware that attempting to use that Lenovorola program you mentioned could have done significant damage to the device, as that program is not intended for this device.
Should we be able to confirm a dead EMMC chip, there's not that many options available. If you are still under manufacturer warranty you can send the device to Lenovorola for repair at no cost. Otherwise, you'd have to pay for the repair. You could instead purchase a replacement, or purchase a device with a broken screen and swap motherboards (and SIM trays).

Need AT&T full stock image to unbrick

Hi!
It was a bad idea to flash 356510B0982Axon M RU image (available on Russian zte website) to my ATT ZTE Z999.
Phone bricked and only visible by my PC as QUSB_BULK. Looks like there is a way to restore it, but i need full original working stock ATT image (any version). Does someone can share it?
Found at many places, but all of them wants money I would pay, if it will be 5 but not 25euro

I flashed mine using this[Leakite]ROM_AXON_M_VDF_SDCARD_SOFTWARE_PACKAGE_MR00a and it's not turning on anymore. We need help :crying:

Looks like we need 348010B3014Z999V1.0.0B30.zip
But i can't find it in free access, only payment sites like easy-firmware and grt-dongle

Any idea how we can flash a rom on edl mode?

No ideas for now. But friend of mine works in cellphone service center, he helped me many times to unbrick some devices. For now he is found firmware to restore Chinese axonM, can't find at&t

Ok, i got image... 10$ wasted It really looks like correct AT&T image, but QFIL, MiFlash, QPST, QComDownloadTool (ZTE util) can't flash it
https://drive.google.com/file/d/1n0qjH1vaTQVwckFPizSAMDHrBh6uA8b6/view?usp=sharing

BRuTe007 said:
Ok, i got image... 10$ wasted It really looks like correct AT&T image, but QFIL, MiFlash, QPST, QComDownloadTool (ZTE util) can't flash it
https://drive.google.com/file/d/1n0qjH1vaTQVwckFPizSAMDHrBh6uA8b6/view?usp=sharing
Click to expand...
Click to collapse
You need the firehose programmer and use parts of that firmware to flash with it

BRuTe007 said:
Ok, i got image... 10$ wasted It really looks like correct AT&T image, but QFIL, MiFlash, QPST, QComDownloadTool (ZTE util) can't flash it
https://drive.google.com/file/d/1n0qjH1vaTQVwckFPizSAMDHrBh6uA8b6/view?usp=sharing
Click to expand...
Click to collapse
... If you can get to edl mode, try those Axon 7 firehose programmers. Since they are the same platform. QFIL should flash this image zip with no problem.

Honami754 said:
... If you can get to edl mode, try those Axon 7 firehose programmers. Since they are the same platform. QFIL should flash this image zip with no problem.
Click to expand...
Click to collapse
Are you sure because im under the impression you can only use the exact specific firehose even if its the same chip i think its hard encoded into the shara protocol it will only except the same firehose but mabye im wrong thats just what ive known

Tried Axon 7 EDL Tool and it's won't work
stopped futher research and replaced MB from broken one that bought on ebay

Anyone attempted to flash this? I just got a new one and I'm scared flashing again. I'm thinking of just buying an At&t prepaid sim just to get the latest update.

tidus1ph said:
Anyone attempted to flash this? I just got a new one and I'm scared flashing again. I'm thinking of just buying an At&t prepaid sim just to get the latest update.
Click to expand...
Click to collapse
No reason to flash it if your axon not bricked. I's a stok ATT version.

BRuTe007 said:
No reason to flash it if your axon not bricked. I's a stok ATT version.
Click to expand...
Click to collapse
The one my phone got is the october 1, 2017 patch with build number Z999V1.0.0B21. So the download file is the newer-ish right? Because on the website the latest is sept 18, 2018 patch with build number Z999V1.0.0B35.

tidus1ph said:
The one my phone got is the october 1, 2017 patch with build number Z999V1.0.0B21. So the download file is the newer-ish right? Because on the website the latest is sept 18, 2018 patch with build number Z999V1.0.0B35.
Click to expand...
Click to collapse
This one was named 348010B3014Z999V1.0.0B30.zip and i think B35 newer then this one.

Here are the Z999 and Z-01K firehose files, extracted from an Internal ZTE tool I have. Hope it helps people out
Z-01K (Japanese Axon M)
https://www.androidfilehost.com/?fid=1395089523397896977
Z999
https://www.androidfilehost.com/?fid=1395089523397896976
All I ask is if you use these files in a guide or anything that you credit me for providing them because i needed to pay to grab these.

deadman96385 said:
Here are the Z999 and Z-01K firehose files, extracted from an Internal ZTE tool I have. Hope it helps people out
Z-01K (Japanese Axon M)
https://www.androidfilehost.com/?fid=1395089523397896977
Z999
https://www.androidfilehost.com/?fid=1395089523397896976
All I ask is if you use these files in a guide or anything that you credit me for providing them because i needed to pay to grab these.
Click to expand...
Click to collapse
Forgive my ignorance. But what does these files do? z999 is the at&t's version right?

tidus1ph said:
Forgive my ignorance. But what does these files do? z999 is the at&t's version right?
Click to expand...
Click to collapse
The firehose is needed to flash the device with QFIL, miflash, etc so a device can be unbricked.

deadman96385 said:
The firehose is needed to flash the device with QFIL, miflash, etc so a device can be unbricked.
Click to expand...
Click to collapse
Tried to flash with Miflash but that failed starts flashing but then says : Cannot Read Port and stops flashing.
Also tried QFIL But also fails with this message : Download Fail:Sahara Fail:QSaharaServer Failrocess fail
hope somone can clarify if its even possible to recover.
this brick happend after update.

Reverender said:
Tried to flash with Miflash but that failed starts flashing but then says : Cannot Read Port and stops flashing.
Also tried QFIL But also fails with this message : Download Fail:Sahara Fail:QSaharaServer Failrocess fail
hope somone can clarify if its even possible to recover.
this brick happend after update.
Click to expand...
Click to collapse
Sounds like you have a driver issue make sure you install the Qualcomm drivers

deadman96385 said:
Sounds like you have a driver issue make sure you install the Qualcomm drivers
Click to expand...
Click to collapse
UPDATE:
figured out what is wrong with QFIL
the Firehose File you send reads only 0 bytes this is why qfil stoped working. might also be the problem with the rest of the flashers i tried.
anycase the elf file in the zip is broken ?
any case you have a .MBN version instat of a .ELF maybe that works ?
Seems im making progress.
im using ToolStudio right now.
the only thing i guess is holding me back is im missing 2 files: RAM and Boot image.
these are not present in the firmware file.
is there anyway i could get them ?

is there anyone has the latest version of s1tool? (not 2015 version)

Is there anyone have the latest version of s1tool? (not the 2015)
my phone is in bricked mode (error flashing partition.sin using flashtool), now it is in SOMC Flash Device. using the 2015 version of S1tool tells me that my device is not supported. my phone is on the late-2016 line.
if there's no recent version of s1tool, can you guys tell me the alternative ways to unbrick my phone? (can't send the phone to sony, warrantly expired a long long time ago, can't afford to buy a solder station, box)
thanks. i would gladly donate some money to those who successfully helped me to unbrick my phone. i can't afford another one for now. ?

S2tool, what model?
Uh, i think there is more recent software such as S2tool. Look it up; you also don't state the model of phone so it's hard to provide help.

502so but it has f8131 rom. tried to downgrade to it's factory rom. error at flashtool flashing my created ftf, at partition.sin. now my phone won't boot again.

&(*) said:
Uh, i think there is more recent software such as S2tool. Look it up; you also don't state the model of phone so it's hard to provide help.
Click to expand...
Click to collapse
502so but it has f8131 rom. tried to downgrade to it's factory rom. error at flashtool flashing my created ftf, at partition.sin. now my phone won't boot again.

Softbrick or hardbrick? Are you still able to get a response (green or blue led) when plugging it in to a pc via flashmode and/or fastboot?

&(*) said:
Softbrick or hardbrick? Are you still able to get a response (green or blue led) when plugging it in to a pc via flashmode and/or fastboot?
Click to expand...
Click to collapse
hardbrick to me. flashmode doesn't work anymore. fastboot still can boot. but it's useless anyway. all flashing/ unlock commands just give me "command not allowed" error. if i ground one of the pins of the phone and disconnect the battery before i connect it to pc, i got SOMC Flash Device in Device Manager. Tried faking it as Qualcomm HS USB Loader 9008 and get QFIL to read partition table. No response and then timeout error. S1tool 19V2015 version (this is the latest i could find on google) just gives me "HARDWARE NOT SUPPORTED" error.

Yeah, I don't think s1tool is compatible with that boad (X performace); try SETool2 ( https://files.setool.net/support/SETool2/ ) & read ( https://support.setool.net/showthread.php?3-UPDATES-AND-NEWS/page666 ).

&(*) said:
Softbrick or hardbrick? Are you still able to get a response (green or blue led) when plugging it in to a pc via flashmode and/or fastboot?
Click to expand...
Click to collapse
&(*) said:
Yeah, I don't think s1tool is compatible with that boad (X performace); try SETool2 ( https://files.setool.net/support/SETool2/ ) & read ( https://support.setool.net/showthread.php?3-UPDATES-AND-NEWS/page666 ).
Click to expand...
Click to collapse
when i launch the tool, it says smartcard not found. doesn't it requires the box? it costs hella more than my phone ?

Are you downloading it from this link ( https://mega.nz/folder/s5knUKJa#JFUJb-9-AJr27vTl_MJ9GQ )? I see another .rar archive named scripts did you unpack it and read the instructions? Btw, is your bootloader unlocked? Don't give up, there is a free version out there. Write on the forum for SE2Tool and see.

&(*) said:
Are you downloading it from this link ( https://mega.nz/folder/s5knUKJa#JFUJb-9-AJr27vTl_MJ9GQ )? I see another .rar archive named scripts did you unpack it and read the instructions? Btw, is your bootloader unlocked? Don't give up, there is a free version out there. Write on the forum for SE2Tool and see.
Click to expand...
Click to collapse
no, my bootloader is locked. obviously came from softbank japan. checked it too before flashing.
EDIT:- if i can even use setool, holding down the volume down button while connecting to the computer just end up with blinking green led light on my xperia. the computer doesn't detect it. when i use testpoints, the computer detects as SOMC Flash Device. here's what i did so far to attempt flash using testpoints
1) flashtool method:- not working. mtp error. shows message like "for 2011 device line, make sure to turn off mtp". i can't even boot my phone to go to settings to turn off that thing
2) emma method:- not working. doesn't detect anything
3) s1tool method:- hardware not supported error
4) setool2 using the link you've provided:- smartcard not found. i don't have and can't even afford the box.
5) qfil method:- faked the somc flash device as qualcomm hs usb loader 9008. doesn't work. timeout error.
* before i see the somc flash device, the computer detects it as QUSB_BULK
* i will probably donate some money to someone who can bring my phone back to life again

Try what I posted in the previous reply ( https://mega.nz/folder/s5knUKJa#JFUJb-9-AJr27vTl_MJ9GQ ). There are other scripts you might of missed. I don't see how a smartcard device is needed, though I could be wrong. That should be the correct software to fix boot and unbrick your device. There might be a post on the many pages of the forum that provides SE2Tool to help you find the solution. Are you sure you have the right points, when the light stops blinking that is your indication the board has been put into flash mode. You might have to pack the boot partition into a different format (.ftf) to get it to flash with the software ( https://sony.yt/topic/5324-s1tool-t...l-xperia-qsd8250-msm7227-msm8255-smartphones/ ). Was able to unbrick a docomo Z1C with the suggested method. When you do accomplish the task, write a tutorial for other's.

&(*) said:
Try what I posted in the previous reply ( https://mega.nz/folder/s5knUKJa#JFUJb-9-AJr27vTl_MJ9GQ ). There are other scripts you might of missed. I don't see how a smartcard device is needed, though I could be wrong. That should be the correct software to fix boot and unbrick your device. There might be a post on the many pages of the forum that provides SE2Tool to help you find the solution. Are you sure you have the right points, when the light stops blinking that is your indication the board has been put into flash mode. You might have to pack the boot partition into a different format (.ftf) to get it to flash with the software ( https://sony.yt/topic/5324-s1tool-t...l-xperia-qsd8250-msm7227-msm8255-smartphones/ ). Was able to unbrick a docomo Z1C with the suggested method. When you do accomplish the task, write a tutorial for other's.
Click to expand...
Click to collapse
opening setool2 from link provided https://mega.nz/folder/s5knUKJa#JFUJb-9-AJr27vTl_MJ9GQ
same error. smartcard not found. probably needs that expensive box. is there any loader though? to bypass this error?

Write who provided the software on the SE2Tool forum and ask if you are using it correctly; I'm pretty sure you don't need a device to run it and the software should suffice for what you need it to do.

SE2Tool Forum?
Did you write/receive a reply from the software engineers for SE2Tool?

&(*) said:
Did you write/receive a reply from the software engineers for SE2Tool?
Click to expand...
Click to collapse
Too bad I couldn't find the SE2Tool forum even it's app. Googling just results in nonsense results. No regarding Sony phones.

The link I provided for the software download is the forum. Write them, someone will help you.

&(*) said:
Are you downloading it from this link ( https://mega.nz/folder/s5knUKJa#JFUJb-9-AJr27vTl_MJ9GQ )? I see another .rar archive named scripts did you unpack it and read the instructions? Btw, is your bootloader unlocked? Don't give up, there is a free version out there. Write on the forum for SE2Tool and see.
Click to expand...
Click to collapse
&(*) said:
The link I provided for the software download is the forum. Write them, someone will help you.
Click to expand...
Click to collapse
Apparently not.
https://support.setool.net/showthre...X-Performance-502SO-Hard-Bricked&goto=newpost