Hello All
Recently as i didnt use the pen realized that my pen wont work in a line and jump over it...Actually Dead Space!
First look at the LED light draw a direct line to down of phone
Second look at the letter M in the world Samsung Logo under speaker n draw a line to down...
The space between this two line, from up to down of phone, my pen wont show its hover when i place it over that space, like a magentic its push it to that side(see Screenshot) its scrieve in that aria i cant write there just my pen slick from there.. pushing n pulling between the two lines...
Tried many roms, resets, full stock but no chance at all
I tested my pen on Note3 n it was fine (N3 pens wont work on N5 at all)
If pen is ok so its a phone problem...
What is wrong here...i dono if it wasnt work from 1st day or if it causes by installing some custom rom kernel n changing vlotages n power by Symapse...
I dont use any kinde of bag, case or cover on my phone only a glass...
I used *#0*# n select spen it didnt changed.
Is it a SW problem or Hw!!!?
If its SW what should i do?what piece is wrong? Digitizer Board? Or anything else...
Tnx for reading n thinking n replying....
http://oi63.tinypic.com/epn4ut.jpg
Plzzz help me
Any Guess?
Related
i was replacing my g1 digitzer. I had the guide with me still took me 12 hours to figure out how to do it. i disassembled assembled it thousand times before the slide was properly working and touch screen was functional. Now the problem is, something is wrong i cant figure out.
When i open the keyboard the screen doesnt flip orientation. It does on its own.
When i type through keyboard the buttons change randomly and they dont respond to what i am pressing
. The music volume bar shows up it self , the sound is very very very low from the speakers.
Camera still works.
touch screen working perfectly.
The trackball, menu button, and all those on that panel are working fine.
please help me fix this thing
This not the right place for this. But might have somthing to drivers? And know this probly won't help but u should wipe ur phone if you have not all ready.
Youll have done what i did when i swapped my housing round, i missed 1 conntction that stopped my touchscreen working,,, and then i realised i put the keyboard sensor on upside down :how embarrasing smiley:
actually i damaged one of the connectors on the strip of my keyboard
everything else is working now except for few alphanumeric buttons!
My front buttons were broken so i replace them, when i assembled it back together i tried to type on the sliding keyboard and only the letters F N O alt would work can you please help me out. I have taken the phone apart and checked the connections and the "ribbons" or cables for tears they are fine i don't know whats wrong the only thing that i know is that the orange tape that was on the small clamp is not there but i have put regular tape on there and tried that but still the same problem, i have tried it with and with out the tape and it dosent want to work please help me out.
thank you very much for your time.
-Mitchell
my diamond's touch screen started not to work anymore.. and i though maybe its the rom or something.. i flashed a new rom and now i stucked at the screen allign thing.. when im touching the the plus shaped thing, phone is not responding.. when i touched several times, it respond like 2-3 min later.. but i couldnt pass the allign screen thing.. any idea about the problem??
up.. any ideas?
Speed up the phone through changing the touch screen
Hi guys,
today it is rany sunday. So i changed my ugly scrached touch screen of the Touch Diamond. I bought it for about 10,00 € at ebay. It was coming with tools for screws with Torx. But my phone has only cross slot screws with size "Philips 000". You can buy the glass for about 5,00 € without the tools. I was glad to find this tool in my own box. I used this tutorial: http://erkinson.altervista.org/de/htc-touch-diamondsmontaggio-e-sostituzione-touchdisplay/ It's original language is italian but the google translation was great enough. The brazing for the cable of the touch glass was easilier than i thought. The two connectors from the screen and from zhe key pad i must connect two times. The first try the screen stay blank after switching on. For this two connectors read here: http://forum.xda-developers.com/showthread.php?t=657514
Now everything is working fine and it seems that the phone is much faster after the repair. The steering over the screen is much more smoothly and all movements are more exactly.
Is it possible that the scratches on the screen require mor calculating power while the movements with the tip or the finger?
Try it and share some results with me.
Rudi
Add 21.09.11: Now the phone is running well some days. The only thing that is not working anymore is the power consumption out of the battery. The Phone is getting hot and the battery is empty very fast. Also when the phone is switched off (not in standby) the battery is empty after about 3 hours. I disassembled and assembled again but with no new results. I was looking for some fibre of the metallized tapes. But i found nothing. Has someone experiance with that behavier?
Rudi
Hello guys ... I hope some one can give me a hand here
I was mad and slammed my SXL device in the ground and it messed up a lot of things ...
1-screen is broken like hell
2-black screen but there is small light coming out though and soft keys i feel they vibrate and when my sister called screen was with a little light and when I pulled the ring (I assumed that i pulled it...) and it worked i can talk but i cant see any picture but small light and the flash led works the volume keys and power key and charging slot need a bit push to work (the phone shape got like the phone ate too much fat its banded like its fat XD) though volume buttons arent working (as I said the part where those three things connected moved a bit and made the phone look like its fat)
and if you want pictures ill upload soon...
I just wanted to know what parts should I buy to replace and a guide to show me how to fix (with amount of money I need to buy the parts)
OR how much will it cost me if i took it to an expert and told him to fix it ??
please replay As soon as you see the thread
Hey guys I have a question. I recently changed the screen on my note 4 to a new non cracked one. Now I tried the screen with the s pen before I took the phone apart so I knew it worked. Well once I got the phone all back together the s pen on the new screen doesn't work anymore. What would control the s pen in the phone hardware wise that would make it stop working? I tried all the software troubleshooting ideas other than reloading the rom. Anybody have any ideas?
Probably the s pen ribbon cable not connected properly. I had the same issue when I personally repaired my n4. Realized it after the same issues u have and had to separate the lcd from the frame to easily connect both ribbon cables the same time.
Thanks. I'll check it out.
Did you manage to fix it? I have same problem. I got mine fixed at a phone repair shop. When I remove the s pen, the air command pops out but when I touch the screen, nothing happens.
svtthis said:
Thanks. I'll check it out.
Click to expand...
Click to collapse
Screen has brown copper screen behind it, if you break that your spen wont work, also spen connector is pain is behind to put it back if you open the screen from back not from front, make sure its fully in use flash light to see