Related
Hi,
I want to install MIUI 7.But currently I am on CM12 with cwm recovery.Can anyone please let me know can I flash MIUI 7 directly.If not let me know how I can proceed.
Thanks
nsakhare said:
Hi,
I want to install MIUI 7.But currently I am on CM12 with cwm recovery.Can anyone please let me know can I flash MIUI 7 directly.If not let me know how I can proceed.
Thanks
Click to expand...
Click to collapse
Xiaomi Developer ROMs are delivered through flashable zips and through fastboot images, maybe look into the second option. Be aware that Xiaomi ROMs might replace the Recovery upon boot, if that isn't included in the fastboot image already, which I think is likely, and take a look into potential partitioning hazards.
Edit: To be extra helpful, here's the thread http://en.miui.com/thread-149081-1-1.html
I failed while flashing miui 7 stable on cwm r11, btw miui 6 worked for me everytime even on extended partition.
So I'd say no
hope this helped you
Fikshun said:
I failed while flashing miui 7 stable on cwm r11, btw miui 6 worked for me everytime even on extended partition.
So I'd say no
hope this helped you
Click to expand...
Click to collapse
Stable version will not work in extended partition. Only developer version will work. I think so
24likan said:
Stable version will not work in extended partition. Only developer version will work. I think so
Click to expand...
Click to collapse
I'm currently on Miui 6.7.1.0 stable china rom on extended partition it worked for me
I am miui 7 global stable, i flashed with twrp on extended partition without problems.
slavke1976 said:
I am miui 7 global stable, i flashed with twrp on extended partition without problems.
Click to expand...
Click to collapse
really cuz twrp failed me everytime
which version of twrp are you using
Yes really, twrp is version 2.8.5.0 . To repartition i used cwm recovery, then i changed to twrp.
When i tried to flash miui v6 with twrp i failed, then i changed to cwm recovery, and then i flashed. Try like this if twrp makes failed flashing.
slavke1976 said:
Yes really, twrp is version 2.8.5.0 . To repartition i used cwm recovery, then i changed to twrp.
When i tried to flash miui v6 with twrp i failed, then i changed to cwm recovery, and then i flashed. Try like this if twrp makes failed flashing.
Click to expand...
Click to collapse
what about miui 7 did you flash it with cwm too
I also faced same issue, I found workaround for it from MIUI forums.
1) Go to recovery and wipe all (except internal storage)
2) Flash MIUI rom
3) You will get error, now just go to reboot and select recovery
4) flash rom again (without wiping) and it should work
Using latest TWRP
pra300 said:
I also faced same issue, I found workaround for it from MIUI forums.
1) Go to recovery and wipe all (except internal storage)
2) Flash MIUI rom
3) You will get error, now just go to reboot and select recovery
4) flash rom again (without wiping) and it should work
Using latest TWRP
Click to expand...
Click to collapse
did you try the above steps on TWRP?
and does it work on extended partition
Yes twrp-2.8.7.0
I am on stock partition now. I think it should work with extended partition as it worked for me in the past when I tried MIUI 6. Its only the update which you will need to flash using recovery. Give it a try.
Yes i flashed with twrp recovery, it was working. First i flashed stable miui v7, then i reflashed with stable rooted version of miui v7 stable. so 2 times flashed v7 with twrp on extended partitions. I have mi4. but it should work as it is cancro
slavke1976 said:
Yes i flashed with twrp recovery, it was working. First i flashed stable miui v7, then i reflashed with stable rooted version of miui v7 stable. so 2 times flashed v7 with twrp on extended partitions. I have mi4. but it should work as it is cancro
Click to expand...
Click to collapse
alright I'll try it out
pra300 said:
Yes twrp-2.8.7.0
I am on stock partition now. I think it should work with extended partition as it worked for me in the past when I tried MIUI 6. Its only the update which you will need to flash using recovery. Give it a try.
Click to expand...
Click to collapse
thanks bro it worked for me I successfully flashed Stable Miui 7 on extended partition through trwp just as you mentioned
Wouldn't flashing the fastboot image file through MI suite work? I am also on cm12.1 but would like to switch back to miui 7 developer versions. I thought a simple fastboot image flash should work
aces170 said:
Wouldn't flashing the fastboot image file through MI suite work? I am also on cm12.1 but would like to switch back to miui 7 developer versions. I thought a simple fastboot image flash should work
Click to expand...
Click to collapse
what if i don't have a PC
Fastboot method for fast and clean install.. not sure if flashing miui rom thru twrp/cwm will work..
twist9 said:
Fastboot method for fast and clean install.. not sure if flashing miui rom thru twrp/cwm will work..
Click to expand...
Click to collapse
i suddenly got bootlop on Cm12.1, didnt do anything to my mi3 it just happen
so i decided to flash again, worked and boot up and few minutes it bootloop again
switch to miui7 and flash using miflash to get clear of everything but,
i got unspecified error (0x80004005:FAILED) (remote sized too large)
while flashing using miflash
any suggestion how to unbrick this??
BTW im on extended partition
vranxzs said:
i suddenly got bootlop on Cm12.1, didnt do anything to my mi3 it just happen
so i decided to flash again, worked and boot up and few minutes it bootloop again
switch to miui7 and flash using miflash to get clear of everything but,
i got unspecified error (0x80004005:FAILED) (remote sized too large)
while flashing using miflash
any suggestion how to unbrick this??
BTW im on extended partition
Click to expand...
Click to collapse
restore to stock partition and try it should work
As we know we have a few treble Roms available for our device. But they are not stable at all in terms of the camera.they could be faster and smoother than the stock 7.0.
20 mpx Huawei mate 9 camera has a lot of features but those Roms lack that privilege.
Actually, we have a great Nougat Roms as well. Which I prefer - fromfuture-.
I'll be using this stock rom until a new AOSP 8.1 or RR Remix will be released.
[Resurrection Remix] [Unofficial] [2018-05-19] Phh-Treble https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
[AOSP 8.1] [2018-06-07] Phh-Treble
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Lineage] [Unofficial] [2018-05-19]
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/lineage-phh-treble-t3767690
How to flash a Generic System Image (GSI) on Project Treble supported deviceshttps://www.xda-developers.com/flash-generic-system-image-project-treble-device/For this Roms you have to flash:
1)TWRP https://www.androidfilehost.com/?fid=890278863836283747
2)Gapps: https://www.androidfilehost.com/?fid=746163614322274929
3)addosu-15.1am -to root your device (Supersu doesn't work or magisk) https://www.androidfilehost.com/?fid=674106145207485248
4)P20 Pro Stock Camera : https://www.androidfilehost.com/?fid=6741061452074971145)If you want to gain a better battery performance, flash the HyperPlus Kernel. https://www.androidfilehost.com/?fid=962339331458990548
Thanks to phhusson, and the developers for these Roms.:good:
Reserved
osk4rin said:
Here is the Stock Huawei camera zip file.
works perfectly on my US Huawei mate 9, using RR remix Oreo or Lineage 15.
Just flash it with Magisk, don't forget to flash your stock kernel before on fastboot .
reboot it and that's it.
Click to expand...
Click to collapse
What problems and bugs you are facing now with Resurrection remix? Is it worth to update?!
Thanks in advance,?
Thanks .. ????
Mohammed_M. said:
What problems and bugs you are facing now with Resurrection remix? Is it worth to update?!
Thanks in advance,?
Click to expand...
Click to collapse
Hi! Yes,its Worth it tough. Is fast and smooth.and lineage as well.
Pretty much just a few bugs, but minors. Now we have 4g available on RR remix.the only issue is the twrp .still encrypted,if I want to flash any zip file from there I need to moved to my Sd card.
Also I can't flash the - Adaway Youtube-magisk module.I don't know why
mataflakitas said:
Thanks .. ????
Click to expand...
Click to collapse
You're welcome
Mohammed_M. said:
What problems and bugs you are facing now with Resurrection remix? Is it worth to update?!
Thanks in advance,
Click to expand...
Click to collapse
I have RR and rooted though Magisk with SafetyNet passed.
All in all it's very nice, sometimes my phone makes noises even if it's in "Not disturb" Mode. But that only happened twice till now.
Everything else works! GPS, Wifi. 4g, Bluetooth etc. Only Android Auto doesnt work for me, but that's not that important.
Emare212 said:
I have RR and rooted though Magisk with SafetyNet passed.
All in all it's very nice, sometimes my phone makes noises even if it's in "Not disturb" Mode. But that only happened twice till now.
Everything else works! GPS, Wifi. 4g, Bluetooth etc. Only Android Auto doesnt work for me, but that's not that important.
Click to expand...
Click to collapse
How do you go about installing this rom? I'm worried Ill screw up my mate 9 but I hate emui so much. I'm using fromfuture with twrp atm
KitsuneUK said:
How do you go about installing this rom? I'm worried Ill screw up my mate 9 but I hate emui so much. I'm using fromfuture with twrp atm
Click to expand...
Click to collapse
So fromfuture is Nougat based?
Then you need to upgrade to Oreo first. Just search the forum, there are several Guides.
After that extract the stock boot.img, kernel.img and recovery_ramdisk.img from your stock rom using Huawei Update Extractor (settings->uncheck checks)
Than simply flash the three Images through fastboot on your phone and do a Data Format + Cache Wip ein Stock Recovery.
Than flash RR Rom with fastboot flash system and Twrp if you want.
Emare212 said:
So fromfuture is Nougat based?
Then you need to upgrade to Oreo first. J
Click to expand...
Click to collapse
There any guides I can follow?
Emare212 said:
So fromfuture is Nougat based?
Then you need to upgrade to Oreo first. Just search the forum, there are several Guides.
After that extract the stock boot.img, kernel.img and recovery_ramdisk.img from your stock rom using Huawei Update Extractor (settings->uncheck checks)
Than simply flash the three Images through fastboot on your phone and do a Data Format + Cache Wip ein Stock Recovery.
Than flash RR Rom with fastboot flash system and Twrp if you want.
Click to expand...
Click to collapse
So I have two questions right now : how to get a back up of my system and how to gate the update.app? So can you answer me please
Ps I have the stock recovery. and thanks in advance ?
KitsuneUK said:
There any guides I can follow?
Click to expand...
Click to collapse
It's a while ago since I upgraded to Oreo, but I think I used Method 1 from https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/#Method_1_using_HWOTA_Tool
But no Guide was perfect, I needed to mix them all a bit
https://forum.xda-developers.com/mate-9/how-to/official-oreo-c432-l29-l09-t3720277
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
---------- Post added at 01:32 PM ---------- Previous post was at 01:19 PM ----------
Mohammed_M. said:
So I have two questions right now : how to get a back up of my system and how to gate the update.app? So can you answer me please
Ps I have the stock recovery. and thanks in advance
Click to expand...
Click to collapse
Are you rooted? Are you using Stock Rom from huawei?
Emare212 said:
It's a while ago since I upgraded to Oreo, but I think I used Method 1 from https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/#Method_1_using_HWOTA_Tool
But no Guide was perfect, I needed to mix them all a bit
https://forum.xda-developers.com/mate-9/how-to/official-oreo-c432-l29-l09-t3720277
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
---------- Post added at 01:32 PM ---------- Previous post was at 01:19 PM ----------
Are you rooted? Are you using Stock Rom from huawei?
Click to expand...
Click to collapse
No I don't have root I have emui 8 and everything is stock
Mohammed_M. said:
No I don't have root I have emui 8 and everything is stock
Click to expand...
Click to collapse
Then you can use HiSuite on your PC to create a backup of your data.
So if you are using EMUI 8 your phone is already on stock Oreo?
Is the front camera working in the stock huawei camera on RR? if it is might try updating tonight...
Emare212 said:
Then you can use HiSuite on your PC to create a backup of your data.
So if you are using EMUI 8 your phone is already on stock Oreo?
Click to expand...
Click to collapse
Yes it is on stock oreo I did a backup of the data but what about the system? Or update.app so I can back to stock again if I wanted to?
KitsuneUK said:
Is the front camera working in the stock huawei camera on RR? if it is might try updating tonight...
Click to expand...
Click to collapse
Normal Camera app works well for me with both cameras. I don't have Huawei Stock Camera installed.
---------- Post added at 03:44 PM ---------- Previous post was at 03:25 PM ----------
Mohammed_M. said:
Yes it is on stock oreo I did a backup of the data but what about the system? Or update.app so I can back to stock again if I wanted to?
Click to expand...
Click to collapse
If you have your data backup already you can easily go to RR and back to Stock if you want with this method.
First you need to unlock your bootloader with the code you will get/got from Huawei. See here.
1. Go to firmware database and find your stock firmware (which you are using atm)
2. Download the FullOTA-MF-PV (click on "update" to download) and unzip it.
3. Download Huawei Update Extractor
4. Open Huawei Update Extractor and go to settings --> Disable both checksum boxes
5. Import your update.app File
6. Mark kernel.img, ramdisk.img and recovery_ramdis.img and rightclick -> Extract Selected
7. Flash them trought fastboot
Code:
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
8. Go to Recovery and do a factory reset and cache wipe
9. Flash your RR rom system.img with
Code:
fastboot flash system system.img
10. Flash TWRP if you want
Code:
fastboot flash recovery_ramdisk twrp.img
Get TWRP here: https://mega.nz/#!pT5lRA7Y!G5DhJdsR-...fHGzN8OOu9aCko or here https://forum.xda-developers.com/mate-9/development/recovery-twrp-3-2-1-0-oreo-t3734967
11. Reboot
12. Optional Root with Magisk 15.4 (see here) --> Simply flash the zip in TWRP and install Magisk Manager App (if you fail in SafetyNet Test flash after Reboot this in TWRP)
13. Update in Magisk Manger App directly to Magisk 16
Emare212 said:
Normal Camera app works well for me with both cameras. I don't have Huawei Stock Camera installed.
---------- Post added at 03:44 PM ---------- Previous post was at 03:25 PM ----------
If you have your data backup already you can easily go to RR and back to Stock if you want with this method.
First you need to unlock your bootloader with the code you will get/got from Huawei. See here.
1. Go to firmware database and find your stock firmware (which you are using atm)
2. Download the FullOTA-MF-PV (click on "update" to download)
3. Download Huawei Update Extractor
4. Open Huawei Update Extractor and go to settings --> Disable both checksum boxes
5. Import your firmware.zip files
6. Mark kernel.img, ramdisk.img and recovery_ramdis.img and rightclick -> Extract Selected
7. Flash them trought fastboot
8. Go to Recovery and do a factory reset and cache wipe
9. Flash your RR rom system.img with
10. Flash TWRP if you want Get TWRP here: https://mega.nz/#!pT5lRA7Y!G5DhJdsR-...fHGzN8OOu9aCko
11. Reboot
12. Optional Root with Magisk 15.4 (see here) --> Simply flash the zip in TWRP and install Magisk Manager App (if you fail in SafetyNet Test flash after Reboot this in TWRP)
13. Update in Magisk Manger App directly to Magisk 16
Click to expand...
Click to collapse
Really thank you my friend I really appreciate that ?.
Mohammed_M. said:
Really thank you my friend I really appreciate that .
Click to expand...
Click to collapse
No Problem. For Step 1-7 I dont know, if it's meaningful for you, because you are already on Stock. Maybe @osk4rin, @ante0 or @ajsmsg78 knows it.
I would say Step 1-7 is useless for you and you don't need to do it, but yeah, i dont really know
Emare212 said:
Normal Camera app works well for me with both cameras. I don't have Huawei Stock Camera installed.
---------- Post added at 03:44 PM ---------- Previous post was at 03:25 PM ----------
If you have your data backup already you can easily go to RR and back to Stock if you want with this method.
First you need to unlock your bootloader with the code you will get/got from Huawei. See here.
1. Go to firmware database and find your stock firmware (which you are using atm)
2. Download the FullOTA-MF-PV (click on "update" to download)
3. Download Huawei Update Extractor
4. Open Huawei Update Extractor and go to settings --> Disable both checksum boxes
5. Import your firmware.zip files
6. Mark kernel.img, ramdisk.img and recovery_ramdis.img and rightclick -> Extract Selected
7. Flash them trought fastboot
8. Go to Recovery and do a factory reset and cache wipe
9. Flash your RR rom system.img with
10. Flash TWRP if you want Get TWRP here: https://mega.nz/#!pT5lRA7Y!G5DhJdsR-...fHGzN8OOu9aCko
11. Reboot
12. Optional Root with Magisk 15.4 (see here) --> Simply flash the zip in TWRP and install Magisk Manager App (if you fail in SafetyNet Test flash after Reboot this in TWRP)
13. Update in Magisk Manger App directly to Magisk 16
Click to expand...
Click to collapse
Ok my friend but there are another thing I didn't get my model from the list my model is MHA_L29C158B370 so where should I look for it?
The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
dinoderda said:
The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
Click to expand...
Click to collapse
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
What is gsi?
JoanSB1 said:
What is gsi?
Click to expand...
Click to collapse
Generic System Image.
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
dinoderda said:
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
Click to expand...
Click to collapse
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
MrViking said:
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
Click to expand...
Click to collapse
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
dinoderda said:
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
Click to expand...
Click to collapse
Thats ok, we all make mistakes lol.
Yeah, a pixel experience 9.0 gsi is coming soon, and these GSI's are pretty stable. If you need any more help you can ask me:good:
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
JoanSB1 said:
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
Click to expand...
Click to collapse
What is the exact problem you aee having? Bootloop? Error when trying to flash?
dinoderda said:
What is the exact problem you aee having? Bootloop? Error when trying to flash?
Click to expand...
Click to collapse
Error when trying to flash
JoanSB1 said:
Error when trying to flash
Click to expand...
Click to collapse
Tell me the steps in order which you did when you were trying to flash the ROM.
dinoderda said:
Tell me the steps in order which you did when you were trying to flash the ROM.
Click to expand...
Click to collapse
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
MrViking said:
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
Click to expand...
Click to collapse
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Can I install anything with lock bootloader?
box710 said:
Can I install anything with lock bootloader?
Click to expand...
Click to collapse
no
MrViking said:
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
Does the USSD code work? is that it is important to me and I do not know a ROM that works
dinoderda said:
Generic System Image.
Click to expand...
Click to collapse
Is there a guide to install this I paid DC unlock to get bootloader unlocked but on noughat and cannot find a twrp for noughat:good:
Pie gsi
Hi all,
I have installed Pixel Experience (Oreo) gsi ROM no problem. But if I try to flash any Pie gsi ROM it just goes into a boot loop. I flash system via fastboot and seems OK. Reboot and it just boot loops a few times and goes to the recovery screen that prompts to download and install the standard system.
Has anybody come across this or have any suggestions. I have tried a few different Pie gsi ROMs and same thing happens.
Thanks
Mick
Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..
Divyam2201 said:
Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..
Click to expand...
Click to collapse
Also hoping for something like that :good:
Divyam2201 said:
Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..
Click to expand...
Click to collapse
I think that would be super cool
Not gonna happen, due to lack of active devs, also it's very hard to port an oem rom
fir1996 said:
Not gonna happen, due to lack of active devs, also it's very hard to port an oem rom
Click to expand...
Click to collapse
Somebody could ,,Re Port" IT from redmi Note 5 pro
StarSix01 said:
Somebody could ,,Re Port" IT from redmi Note 5 pro
Click to expand...
Click to collapse
It's possible , i know but some of the "big" devs here abandoned our device,, that's the problem...
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
StarSix01 said:
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
Click to expand...
Click to collapse
Can you post a tutorial about how to make it work...
Divyam2201 said:
Can you post a tutorial about how to make it work...
Click to expand...
Click to collapse
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
---------- Post added at 01:14 PM ---------- Previous post was at 01:13 PM ----------
StarSix01 said:
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
Click to expand...
Click to collapse
I used Dec update vendor.img and boot.img
StarSix01 said:
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
Click to expand...
Click to collapse
Got any fix for fingerprint and faceunlock??
And can you also make a twrp backup and post it
Hello mi6x user, here I share direct link last ROM 10.2.3.0 for Mi6x
This is China build android 8.1, flash with TWRP or Miui recovery. You can use this for bootloop device.
Download:
V 10.2.3.0.ODCCNXM:good:
may it help, thanks :victory:
Alvian_P said:
Hello mi6x user, here I share direct link last ROM 10.2.3.0 for Mi6x
This is China build android 8.1, flash with TWRP.
Download:
V 10.2.3.0.ODCCNXM:good:
may it help, thanks :victory:
Click to expand...
Click to collapse
is it possible to flash that being arb 4?
stevedat said:
is it possible to flash that being arb 4?
Click to expand...
Click to collapse
Yes. My phone also Arb4.
Alvian_P said:
Yes. My phone also Arb4.
Click to expand...
Click to collapse
After flashed this stable version via twrp, is it possible to flash miui dev zip via miui recovery of updater. especially miui pie beta dev and get rid of twrp, become a mi6x instead
stevedat said:
After flashed this stable version via twrp, is it possible to flash miui dev zip via miui recovery of updater. especially miui pie beta dev and get rid of twrp, become a mi6x instead
Click to expand...
Click to collapse
Is possible I think, before change to pie, make sure .zip file of pie must include kernel. I guess recommend flash via miui recovery / TWRP and wipe data. Because update different version of Android, 8.1 to 9.0
I never try Pie because my Arb=4. U can try, if bootloop you can flash this stable version again
Alvian_P said:
Hello mi6x user, here I share direct link last ROM 10.2.3.0 for Mi6x
This is China build android 8.1, flash with TWRP or Miui recovery. You can use this for bootloop device.
Download:
V 10.2.3.0.ODCCNXM:good:
may it help, thanks :victory:
Click to expand...
Click to collapse
Help, Do you have stock boot.img of this rom ?
Because my phone get bootloop when uninstal magisk.
Saud Salomo said:
Help, Do you have stock boot.img of this rom ?
Because my phone get bootloop when uninstal magisk.
Click to expand...
Click to collapse
Its include in .zip files
Seeing as someone finally created a forum with some relevance to miui does anyone know ruffly when xiaomi will be releasing stable update for miui 10 pie , because as we know the beta has arrived for many devs
Quantumkk123 said:
Seeing as someone finally created a forum with some relevance to miui does anyone know ruffly when xiaomi will be releasing stable update for miui 10 pie , because as we know the beta has arrived for many devs
Click to expand...
Click to collapse
There's a miui 10 v9.3.14 in the forum, I'm using it and everything is working fine, very smooth.
I have a mia2 converted to mi6x.. i had xiaomi. eu miui 10 and everything was fine.. i try to update to pie, delete firmware folder but i had bootloop.. so i flash it with firmware file and now i have arb4... in the past i had forgot to delete 1-2 times but arb was stayed at arb2... so.. if some moment i want fo go back to android one, is there a way to do it.. (only for warranty reasons, or to sell tbe phone)
ktlk21 said:
I have a mia2 converted to mi6x.. i had xiaomi. eu miui 10 and everything was fine.. i try to update to pie, delete firmware folder but i had bootloop.. so i flash it with firmware file and now i have arb4... in the past i had forgot to delete 1-2 times but arb was stayed at arb2... so.. if some moment i want fo go back to android one, is there a way to do it.. (only for warranty reasons, or to sell tbe phone)
Click to expand...
Click to collapse
Yes there is a way you need to wait for mi a2 to release an arb 4 rom only way
What will be ARB level after installing this MIUI 10.2.3 or 10.2.5 ODCCNXM ROM?
Currently I have MIUI stable stock ROM 9.6.6.0. If I upgrade it to 10.2.5.0, than can I downgrade to MIUI stable 9.6.60 again?
Thanks
coolman7 said:
What will be ARB level after installing this MIUI 10.2.3 or 10.2.5 ODCCNXM ROM?
Currently I have MIUI stable stock ROM 9.6.6.0. If I upgrade it to 10.2.5.0, than can I downgrade to MIUI stable 9.6.60 again?
Thanks
Click to expand...
Click to collapse
Yeah
---------- Post added at 08:43 PM ---------- Previous post was at 08:43 PM ----------
Quantumkk123 said:
Yeah
Click to expand...
Click to collapse
Oh wait no lol because of arb 4
Quantumkk123 said:
Yeah
---------- Post added at 08:43 PM ---------- Previous post was at 08:43 PM ----------
Oh wait no lol because of arb 4
Click to expand...
Click to collapse
My current ARB level is 4 with MIUI 9.6.6. Will I get brick if I will downgrade from 10.2.5 to 9.6.6?
ktlk21 said:
I have a mia2 converted to mi6x.. i had xiaomi. eu miui 10 and everything was fine.. i try to update to pie, delete firmware folder but i had bootloop.. so i flash it with firmware file and now i have arb4... in the past i had forgot to delete 1-2 times but arb was stayed at arb2... so.. if some moment i want fo go back to android one, is there a way to do it.. (only for warranty reasons, or to sell tbe phone)
Click to expand...
Click to collapse
You can I found the method in a Russian website, but the Bootloader will remains on 6X. But technically you can install AndroidONE again, btw for updating you need to use alternative ways. ( Due to the 6X Bootloader)
Are there any TWRP that can decrypt storage of MIUI 10.2.5 stock China ROM?
coolman7 said:
Are there any TWRP that can decrypt storage of MIUI 10.2.5 stock China ROM?
Click to expand...
Click to collapse
Format data on twrp
Alvian_P said:
Format data on twrp
Click to expand...
Click to collapse
I tried but did not help. When I reboot system, MIUI 10 formats storage with encryption again. I tried following scenarios:
1) Opened TWRP and format data. Reboot system
2) Opened TWRP and format data. Reboot to TWRP again. Reboot to system
3) Opened TWRP and format data. Reboot to TWRP again. Flash magisk. Reboot to system
All has same affect. and TWRP asks password again and again.
coolman7 said:
I tried but did not help. When I reboot system, MIUI 10 formats storage with encryption again. I tried following scenarios:
1) Opened TWRP and format data. Reboot system
2) Opened TWRP and format data. Reboot to TWRP again. Reboot to system
3) Opened TWRP and format data. Reboot to TWRP again. Flash magisk. Reboot to system
All has same affect. and TWRP asks password again and again.
Click to expand...
Click to collapse
Your Data partition can mount in TWRP?
if TWRP ask password, probably because install TWRP with active password lockscreen in system. When install recovery make sure deactive lockscreen pasword first
Try this recovery: https://sourceforge.net/projects/pitchblack-twrp/files/wayne/
Alvian_P said:
Your Data partition can mount in TWRP?
if TWRP ask password, probably because install TWRP with active password lockscreen in system. When install recovery make sure deactive lockscreen pasword first
Try this recovery: https://sourceforge.net/projects/pitchblack-twrp/files/wayne/
Click to expand...
Click to collapse
I can't mount data partition in TWRP. TWRP asks for password. I did not flash TWRP. I just boot TWRP from fastboot when I need with fastboot boot twrp.img command. I tried pitchblack recovery but the result is same.