cant update to TWRP 3.0.0 recovery - T-Mobile Galaxy Note 4 Q&A, Help & Troubleshooting

Hi, i tried updating my twrp recovery from 2.8.7 to 3.0.0, but when i rebooted my device, it gets stuck on the boot screen, never actually proceeding to recovery mode. All good, im still able to odin the old recovery. Anyone successfully updated to 3.0.0 ?
The way i flashed the new recovery was i selected the .img file in twrp and flashed into recovery partition.
Ive also tried flashing the .img in odin 3.0.7, but it didnt work aswell.

@ayeitschris, I have the same problem my friend. Has anyone figured a way yet?

Same issue.

Seems like other note 4 users are having the same issues as well:
http://forum.xda-developers.com/not...-utility-twrp-2-8-1-x-teamwin-t2956011/page56

yeah it will soft brick your recovery and you will have to odin 2.8.7.0 .

There's a fixed version posted in the twrp thread. I'm using 3.0 now and it's working very well

marseillesw said:
There's a fixed version posted in the twrp thread. I'm using 3.0 now and it's working very well
Click to expand...
Click to collapse
link?

marseillesw said:
There's a fixed version posted in the twrp thread. I'm using 3.0 now and it's working very well
Click to expand...
Click to collapse
Where is it?

Just flash it with the rashr app. U don't have to use odin when you have an existing recovery. Just flash over it via the app
---------- Post added at 02:56 AM ---------- Previous post was at 02:53 AM ----------
ayeitschris said:
Hi, i tried updating my twrp recovery from 2.8.7 to 3.0.0, but when i rebooted my device, it gets stuck on the boot screen, never actually proceeding to recovery mode. All good, im still able to odin the old recovery. Anyone successfully updated to 3.0.0 ?
The way i flashed the new recovery was i selected the .img file in twrp and flashed into recovery partition.
Ive also tried flashing the .img in odin 3.0.7, but it didnt work aswell.
Click to expand...
Click to collapse
I also have a T-Mobile note 4 and the recovery flashed perfectly. After you odin the first recovery you never have to use it again. Just use the rashr flashing app and you will never have one problem. The only time you will need odin is if you are going from twrp to cwm
---------- Post added at 02:57 AM ---------- Previous post was at 02:56 AM ----------
ayeitschris said:
Hi, i tried updating my twrp recovery from 2.8.7 to 3.0.0, but when i rebooted my device, it gets stuck on the boot screen, never actually proceeding to recovery mode. All good, im still able to odin the old recovery. Anyone successfully updated to 3.0.0 ?
The way i flashed the new recovery was i selected the .img file in twrp and flashed into recovery partition.
Ive also tried flashing the .img in odin 3.0.7, but it didnt work aswell.
Click to expand...
Click to collapse
Also do not flash a recovery update from your recovery

I have tried flashing it using odin, both stock and custom rom, as well as TWRP manager. 3.0.0 doesn't work. If I flash back to 2.8.7, all is fine. Apparently 3.0.0 doesn't work for the SM-N910T (T-Mobile) version. If anyone has had success with this model, please include links and detailed instructions as to how you successfully upgraded.

http://forum.xda-developers.com/showthread.php?p=65242953
---------- Post added at 09:55 PM ---------- Previous post was at 09:55 PM ----------
Hell-Razor said:
link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=65242953

Related

[RECOVERY] [v510] [3-25-2014] TWRP 2.7.0.1

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
For more info about TWRP check out their website HERE.
Thanks to @Drgravy for putting this together and helping me with v510 device tree. May have found what I was missing for device tree to port CM over to v510
Web Presence:
Twitter
Google+
Change Log:
2.7.0.1
Added OTG support
Instructions:
Flashable zip:
If you already have a custom recovery on device.
Place openrecovery-twrp-2.7.0.1-palman.zip on SDCard
Reboot to recovery
Flash zip file
Fastboot image:
Must have fastboot and/or ADB installed
Reboot device to bootloader
In command prompt type
PHP:
fastboot flash recovery openrecovery-twrp-2.7.0.1-palman.img
adb reboot-bootloader
Reboot into recovery to make sure it flashed correctly and recovery has been updated.
Downloads:
HERE!
Flashable zip:
File name - openrecovery-twrp-2.7.0.1-palman.zip MD5 - bb934b370580718b3d76365de527a980
Fastboot image:
File name - openrecovery-twrp-2.7.0.1-palman.img MD5 - b3f8b657a32ef5eebe5d4b609b0fe11b
Cool to see you got this up
Thank you to both of you!
Everything looks very polished. Changed a couple of settings and everything works as it should. Good deal.
Also installed and tested. All seems to be working correctly. Even clock is now correct. Thank you
Sent from my LG-V510 using Tapatalk
Just installed the IMG using flashify. Rebooted to recovery. Works good! Thanks.
Sent from my LG-V510 using Tapatalk 2
updated version with OTG support.
stuck on Lg screen
AndroidUser00110001 said:
updated version with OTG support.
Click to expand...
Click to collapse
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
Click to expand...
Click to collapse
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0
jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0
Click to expand...
Click to collapse
Unplug USB before reboot in recovery.
Nice to see an update, and hopefully CM, surprised there hasnt been more active development with it being a GPE.
djkinetic said:
Nice to see an update, and hopefully CM, surprised there hasnt been more active development with it being a GPE.
Click to expand...
Click to collapse
I am trying to get device tree going but work has been killing me lately. When I get home my energy level isn't up to my want level to finish it...
Sent from my LG-D800 using XDA Premium 4 mobile app
jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0
Click to expand...
Click to collapse
Hi,
Would you mind sharing how you did a restore of TWRP 2.7.0.0? [I did the same thing...doh!] My tablet is running fine but I just "hang" when trying to reboot into recovery - even when not plugged into USB]. I'm not sure "HOW FAR" back I have to go to get TWRP working again...I image I don't have to start from scratch with loki...... What's the simplest way to get TWRP back. [BTW - I flashed the 2.7.0.1 zip file from within TWRP.]
Thanks!!
Rez
Rezinator said:
Hi,
Would you mind sharing how you did a restore of TWRP 2.7.0.0? [I did the same thing...doh!] My tablet is running fine but I just "hang" when trying to reboot into recovery - even when not plugged into USB]. I'm not sure "HOW FAR" back I have to go to get TWRP working again...I image I don't have to start from scratch with loki...... What's the simplest way to get TWRP back. [BTW - I flashed the 2.7.0.1 zip file from within TWRP.]
Thanks!!
Rez
Click to expand...
Click to collapse
use Flashify its free on googleplay download 2.7.0.0 flash it with flashify then back it up in flashify that way it can always be restored
jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0
Click to expand...
Click to collapse
jionny said:
use Flashify its free on googleplay download 2.7.0.0 flash it with flashify then back it up in flashify that way it can always be restored
Click to expand...
Click to collapse
WOW....That was easy Flashify is a new tool to me (so used to using recovery for all this...so when recovery is unavailable....it gets tricky)...Very cool app. I greatly appreciate your quick response. Back up and running and updating with latest CM nightly currently.
Thanks!!!
Link for seems to be broken. Anybody know where else I can download 2.7?
Link broken
The link to the downloads page still seems to be broken. Does anyone have a mirror up by chance?
There is a Link to the Homepage...in the first post ...you can get it there.....
robster23 said:
There is a Link to the Homepage...in the first post ...you can get it there.....
Click to expand...
Click to collapse
Recovery for our device is not available from the TWRP website. This was a custom version made by the OP.
OP will you update to V2.8.0.1?
Sent from my LG-V510 using XDA Free mobile app
chding said:
OP will you update to V2.8.0.1?
Sent from my LG-V510 using XDA Free mobile app
Click to expand...
Click to collapse
Been awhile but will update over the weekend. Will also post a restore to stock file so 8.3 GPE users can get ready for Lollipop.
Great to see you are still around, do you still have the tablet? If I remember you were thinking to sell it and get a v500
Sent from my LG-V510 using Tapatalk

TWRP Recovery 3.0.2-1 Official for OnePlus3

Hello OnePlus 3 Users
TWRP Recovery 3.0.2-1 Official for OnePlus3
https://twrp.me/devices/oneplusthree.html
Fastboot Install:
Code:
fastboot flash recovery twrp.img
Is only fastboot img or can it be flashed true twrp
I flashed from another twrp, after reboot i can not enter recovery any more.
Any ideas?
Update, fastboot flash fixed error
I think that after flashing you have to reboot recovery instead of rebooting system
---------- Post added at 07:57 PM ---------- Previous post was at 07:50 PM ----------
Just downloaded and flashed it true flashify
cabanas1 said:
I think that after flashing you have to reboot recovery instead of rebooting system
---------- Post added at 07:57 PM ---------- Previous post was at 07:50 PM ----------
Just downloaded and flashed it true flashify
Click to expand...
Click to collapse
flashed using flashify as well. no issues.
So after flashing this it wiped my data ? this is not the first time i flashed twrp on a phone is this has never happen ...
Does this mean no more having to remove finger print security before doing a backup?
ahmedradaideh said:
Hello OnePlus 3 Users
TWRP Recovery 3.0.2.0 Official for OnePlus3
https://twrp.me/devices/oneplusthree.html
Fastboot Install:
Code:
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
OMG!!! Thank you, and the devs! Finally ;D I'm so happy now :angel:
Is OTG with this twrp working?
_MartyMan_ said:
OMG!!! Thank you, and the devs! Finally ;D I'm so happy now :angel:
Click to expand...
Click to collapse
Why so happy?
What are the advantages over the unofficial TWRP recovery?
I flashed through Garak's Unofficial TWRP.
Install>IMG>[select official TWRP IMG]>[Select recovery partition]>Profit.
areon said:
Is OTG with this twrp working?
Click to expand...
Click to collapse
Did not work for me still, but the little arrow is gone
cabanas1 said:
I think that after flashing you have to reboot recovery instead of rebooting system
---------- Post added at 07:57 PM ---------- Previous post was at 07:50 PM ----------
Just downloaded and flashed it true flashify
Click to expand...
Click to collapse
hm...me, too, flashed from another TWRP and then rebooted, worked without problems...
Fir3blade said:
Why so happy?
What are the advantages over the unofficial TWRP recovery?
Click to expand...
Click to collapse
I can't tell Maybe that the official TWRP team has a OnePlus 3, or that is official.
kramer987 said:
flashed using flashify as well. no issues.
Click to expand...
Click to collapse
Did that too, but is there a way too see what version of TRWP you have?
Bradl79 said:
Did not work for me still, but the little arrow is gone
Click to expand...
Click to collapse
This is sad, hopefully they add it soon.
I flashed it,it removed encryption so I tried to re-encrypted the phone left it over night,and it didn't encrypted any ideas?
slonn said:
Does this mean no more having to remove finger print security before doing a backup?
Click to expand...
Click to collapse
Good question, anybody tried?
Hogyoku said:
So after flashing this it wiped my data ? this is not the first time i flashed twrp on a phone is this has never happen ...
Click to expand...
Click to collapse
Happened to me, too. Flashed via fastboot, forced a reboot, booted to recovery, and (I think after entering my encryption password) it wiped the /data partition. Glad I had a TWRP backup from earlier in the day. :/
slonn said:
Does this mean no more having to remove finger print security before doing a backup?
Click to expand...
Click to collapse
Probably not, the official TWRP for the 5X and 6P still need security removed before backup. But it doesn't hurt to try!

Downgrade OOS 4 to 3.5.4.

Hi everybody,
I have a probleme with my OP3T.
I have upgraded the OS from 3.5.4 to 4, but I don't succed to root the phone, mainly because of the TWRP (flash with 3.0.3.0) that doesn't access to the SD card (twrp asks a password I don't have, so that stay encrypted).
When I try to follow this guide, I always have an error with the recovery stock (recovery downloaded from the oneplus support) during the sideload step (I also try to dowload the rom with twrp, but no success...)
So my question:
Does someone can help me to come back to 3.5.4 until twrp is supported by 4.0 ?
Thank you very much
I'm in the same boat. When sideloading 3.5.3 ota it fails after approximately 45%.
I had the same problem. Steps I did in order to make phone functional:
If you don't have TWRP, you have to install it.
Then, you should wipe your phone entirely from TWRP (Factory Reset, Format Data, Advanced Wipe->Dalvik/ART;System;Data;Internal Storage).
Reset the phone and enter TWRP once again.
Copy the official ZIP with OOS 3.5.x ROM into phone's memory, then flash it.
Flash SuperSU, otherwise your phone won't boot.
I don't take any responsibility, in case you mess something up with your phone.
Okay, my solution was to: 1. boot up in fastboot mode 2. Disable encryption by opening a command prompt in administrater mode and type fastboot format userdata. 3. Install 3.5.3 from Twrp.
Not ideal to disable encryption but now I got a working phone
---------- Post added at 04:59 PM ---------- Previous post was at 04:54 PM ----------
djseban2 said:
I had the same problem. Steps I did in order to make phone functional:
If you don't have TWRP, you have to install it.
Then, you should wipe your phone entirely from TWRP (Factory Reset, Format Data, Advanced Wipe->Dalvik/ART;System;Data;Internal Storage).
Reset the phone and enter TWRP once again.
Copy the official ZIP with OOS 3.5.x ROM into phone's memory, then flash it.
Flash SuperSU, otherwise your phone won't boot.
I don't take any responsibility, in case you mess something up with your phone.
Click to expand...
Click to collapse
Thx. I might have forgotten to reset the phone after wipe, before installing 3.5.4 which is why it wouldn't install even from twrp. My solution worked though - encrypting it again will be for another day. Sick of geeking
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
white43 said:
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
Click to expand...
Click to collapse
Yes, it's entirely possible, but what's the point? You can flash stock recovery->lock bootloader->sideload OOS 4.0, and you are stock . From what I've read, not everyone got 4.0 through OTA yet.
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
white43 said:
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
Click to expand...
Click to collapse
Do you have a link for the stock 3.5.X recovery? Link from O+ download section won't work..
They provide the so-called Oxygen Stock REC for OP3T here: downloads.oneplus.net/
But I always got different MD5 after downloading the img they provided.
spida_singh said:
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
Click to expand...
Click to collapse
Hey I am in same boat, does TWRP version matters to return from 4.0.2 to 3.5.3.
I have TWRP(3031) and SU 2.79. I want to revert for battery as well xposed.
uttam.ace said:
Hey I am in same boat, does TWRP version matters to return from 4.0.2 to 3.5.3.
I have TWRP(3031) and SU 2.79. I want to revert for battery as well xposed.
Click to expand...
Click to collapse
It will work with 3.0.3-1 TWRP but you have to flash the ROM twice because of filesystem and put the files twice on the internal memory. Reboot recovery twice forced.
I think TWRP 3.0.4.0 should work better but I do not used it on my phone to restore from 4.0.2 to 3.5.4 so you could try and let us know
---------- Post added at 06:35 PM ---------- Previous post was at 06:32 PM ----------
https://forums.oneplus.net/threads/how-to-restore-to-3-5-4-from-4-0-2-on-op3t.493963/
I made this but you can flash it at your own risk.
To me it worked.
And another tutorial I found but not tried is here https://forum.xda-developers.com/showpost.php?p=70310185&postcount=308
Oneplus 3T downgrade bootloader locked
Hello everyone!
I have a OP3T locked by frp and android nougat oxygen 4.0.3. Is there any solution to downgrade the android to oxygen 3.x??
Thank you guys,
Cheers!
spida_singh said:
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
Click to expand...
Click to collapse
I tried using TWRP 3.0.4.1,
I was able to flash. thing is, while flashing zip in twrp, it won't show any progress for 2-10 minutes.
then it will show finished flashing
---------- Post added at 07:12 PM ---------- Previous post was at 07:07 PM ----------
I want to share my experience,
Latest TWRP 3.0.4.1 made all difficulty easy,
I was in oxyzen os 4.1.6.
then tried sideload, it fails,
then installed TWRp and flash 3.5.4 via TWRP, (have to flash data,system,cache,internal storage) before flashing,
then it just booted, no issue

October update is out - QP1A.190711.148

October 2019 Release | Q 10 - Q Release 2 - QP1A.190711.148 | Open Market
https://www.essential.com/developer/current-builds
chanh2018 said:
October 2019 Release | Q 10 - Q Release 2 - QP1A.190711.148 | Open Market
https://www.essential.com/developer/current-builds
Click to expand...
Click to collapse
Won't root for me.
you mean magisk not working with this build?
mcdull said:
you mean magisk not working with this build?
Click to expand...
Click to collapse
No, it's not working for ME.
Sent from my PH-1 using XDA Labs
avd said:
Won't root for me.
Click to expand...
Click to collapse
Were you able to root the previous 10 build? I have the 148 rooted with Magisk canary, same as the previous two builds (just root, no TWRP). Not sure if it makes a difference, but I don't do OTA updates. I always download and flash the OTA image in adb sideload, then flash the patched boot.img in fastboot.
kt-Froggy said:
Were you able to root the previous 10 build? I have the 148 rooted with Magisk canary, same as the previous two builds (just root, no TWRP). Not sure if it makes a difference, but I don't do OTA updates. I always download and flash the OTA image in adb sideload, then flash the patched boot.img in fastboot.
Click to expand...
Click to collapse
oh cool, so flashing boot images work with the latest canary of MM?! will do that then this evening as well :fingers-crossed:
JimmyCash030 said:
oh cool, so flashing boot images work with the latest canary of MM?! will do that then this evening as well :fingers-crossed:
Click to expand...
Click to collapse
Yes, it does work for me. I've always been doing updates like this, on 9 and 10. Download both OTA and the full image, extract boot.img from the full image, patch it with Magisk, then sideload OTA image in adb, reboot, and finally fastboot flash the patched boot.img. Never had a problem. The only thing is that you have to use Magisk canary build with 10; stable or beta doesn't work.
kt-Froggy said:
Yes, it does work for me. I've always been doing updates like this, on 9 and 10. Download both OTA and the full image, extract boot.img from the full image, patch it with Magisk, then sideload OTA image in adb, reboot, and finally fastboot flash the patched boot.img. Never had a problem. The only thing is that you have to use Magisk canary build with 10; stable or beta doesn't work.
Click to expand...
Click to collapse
yeah worked for me as well with the latest canary MM !!
Magisk 19.4 works just fine on latest 148 build if need be I can upload magisk rooted boot. Img
https://www.androidfilehost.com/?fid=1899786940962605417
MD5:49484e6733bba257051eef831eb25689
This is for QP1A.19711.148
Magisk-Patched-Boot.img
allenjthomsen said:
https://www.androidfilehost.com/?fid=1899786940962605417
MD5:49484e6733bba257051eef831eb25689
This is for QP1A.19711.148
Magisk-Patched-Boot.img
Click to expand...
Click to collapse
getting back to the topic at hand, I flashed this, then TWRP on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now I got to plug this in and swap slots to reinstall TWRP.
Is possible that magisk and twrp are back to not playing nice to each other again?
(I'll test this out if I get a chance to swap slots)
---------- Post added at 11:11 AM ---------- Previous post was at 10:49 AM ----------
avd said:
getting back to the topic at hand, i flashed this, then twrp on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now i got to plug this in and swap slots to reinstall twrp.
Is possible that magisk and twrp are back to not playing nice to each other again?
(i'll test this out if i get a chance to swap slots)
Click to expand...
Click to collapse
now i'm just sitting here looking at the boot animation. Will let it go a little further to see if it starts.
Honestly i couldnt tell you i only rooted havent used twrp much yet because of the lack of android 10 custom roms havent seen a need to use it as of yet.
---------- Post added at 07:19 PM ---------- Previous post was at 07:18 PM ----------
And any further information on this would be great.
allenjthomsen said:
Honestly i couldnt tell you i only rooted havent used twrp much yet because of the lack of android 10 custom roms havent seen a need to use it as of yet.
---------- Post added at 07:19 PM ---------- Previous post was at 07:18 PM ----------
And any further information on this would be great.
Click to expand...
Click to collapse
pretty much everything for this phone resides in t.me/ESSENTIALPH1DEV
avd said:
getting back to the topic at hand, I flashed this, then TWRP on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now I got to plug this in and swap slots to reinstall TWRP.
Is possible that magisk and twrp are back to not playing nice to each other again?
(I'll test this out if I get a chance to swap slots)
---------- Post added at 11:11 AM ---------- Previous post was at 10:49 AM ----------
now i'm just sitting here looking at the boot animation. Will let it go a little further to see if it starts.
Click to expand...
Click to collapse
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again
rignfool said:
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again
Click to expand...
Click to collapse
Flashing the patched image provided just sits there looking at the boot animation.
I'll play with it tonight.
It's a Sprint phone. Could that be the issue?
Sent from my PH-1 using XDA Labs
I flashed September build like this no problem however when I try and adb the October build I cannot get into recovery, when trying it just boots back into system however I can get into fastboot, any ideas?
I'm no expert but did this ans it worked:
1. In TWRP recovery (created nandroid and wiped cache)
2. Flashed full update zip from official download link, then TWRP, then wipe cache
3. Reboot system and let it settle
4. Reboot into TRWP and flashed Canary Channel zip file
5. Wipe cache
6. Reboot system
Hope this helps.
jionny said:
I flashed September build like this no problem however when I try and adb the October build I cannot get into recovery, when trying it just boots back into system however I can get into fastboot, any ideas?
Click to expand...
Click to collapse
Try using the fastboot image (not the OTA the image one) from the essential site.
Download it, remove the "fastboot or something wipe userdata maybe?" line from the flashall.bat script (or from flashall.sh if you're on Mac/Linux)
Then run the flashall.bat or flashall.sh script (again .bat for Win, .sh for the rest)
Should get you working again, albeit without root & twrp
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
rignfool said:
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again
Click to expand...
Click to collapse
? I always have trouble remembering, not anymore it seems
gavinfernandes2012 said:
Try using the fastboot image (not the OTA the image one) from the essential site.
Download it, remove the "fastboot or something wipe userdata maybe?" line from the flashall.bat script (or from flashall.sh if you're on Mac/Linux)
Then run the flashall.bat or flashall.sh script (again .bat for Win, .sh for the rest)
Should get you working again, albeit without root & twrp
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
I always have trouble remembering, not anymore it seems
Click to expand...
Click to collapse
Are you able to give more precise instructions on fastboot instructions?
jionny said:
Are you able to give more precise instructions on fastboot instructions?
Click to expand...
Click to collapse
Nevermind, got the instructions from essentials site. flashed via fastboot which erased everything had to do a complete setup again

Flashing Magisk v20 bootloops to recovery

Hello,
I attempted to root my Mi CC9 / 9 Lite and currently have a bootloop.
What I did:
-Flash TWRP from fastboot (success)
-Boot into TWRP (success)
-Wipe / Factory reset (success)
-Flashing Magisk v20 zip file (success)
-Then, reboot system sends me to TWRP again.
What I tried:
-The phone is not bricked. When I factory reset again from TWRP and boot to system, it boots up.
-Signing the boot image after flashing magisk using the zip file here (This did not work. Flashing the zip file returned a verification error)
Not quite sure how to root my phone at this point. Any help would be much appreciated. Thank you.
You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493
[email protected] said:
You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493
Click to expand...
Click to collapse
Where do I find it?
dupreme said:
Where do I find it?
Click to expand...
Click to collapse
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)
[email protected] said:
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)
Click to expand...
Click to collapse
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?
dupreme said:
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?
Click to expand...
Click to collapse
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.
[email protected] said:
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.
Click to expand...
Click to collapse
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
dupreme said:
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.
Click to expand...
Click to collapse
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
Fstab zip is last because it's the encryption fix
[email protected] said:
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
Fstab zip is last because it's the encryption fix
Click to expand...
Click to collapse
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?
use twrp by brigudav. It has also s built-in Magisk installer.
JimmyBondi said:
use twrp by brigudav. It has also s built-in Magisk installer.
Click to expand...
Click to collapse
Can you share a link? I could not find an XDA thread. Thank you.
dupreme said:
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?
Click to expand...
Click to collapse
TBH no because as Soon as I got TWRP I flash another rom Mi Globe rom to be exact and use the method I posted.

Categories

Resources