Database Develop

[RECOVERY] [v510] [3-25-2014] TWRP 2.7.0.1

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
For more info about TWRP check out their website HERE.
Thanks to @Drgravy for putting this together and helping me with v510 device tree. May have found what I was missing for device tree to port CM over to v510
Web Presence:
Twitter
Google+
Change Log:
2.7.0.1
Added OTG support
Instructions:
Flashable zip:
If you already have a custom recovery on device.
Place openrecovery-twrp-2.7.0.1-palman.zip on SDCard
Reboot to recovery
Flash zip file
Fastboot image:
Must have fastboot and/or ADB installed
Reboot device to bootloader
In command prompt type
PHP:
fastboot flash recovery openrecovery-twrp-2.7.0.1-palman.img
adb reboot-bootloader
Reboot into recovery to make sure it flashed correctly and recovery has been updated.
Downloads:
HERE!
Flashable zip:
File name - openrecovery-twrp-2.7.0.1-palman.zip MD5 - bb934b370580718b3d76365de527a980
Fastboot image:
File name - openrecovery-twrp-2.7.0.1-palman.img MD5 - b3f8b657a32ef5eebe5d4b609b0fe11b

Cool to see you got this up

Thank you to both of you!
Everything looks very polished. Changed a couple of settings and everything works as it should. Good deal.

Also installed and tested. All seems to be working correctly. Even clock is now correct. Thank you
Sent from my LG-V510 using Tapatalk

Just installed the IMG using flashify. Rebooted to recovery. Works good! Thanks.
Sent from my LG-V510 using Tapatalk 2

updated version with OTG support.

stuck on Lg screen
AndroidUser00110001 said:
updated version with OTG support.
Click to expand...
Click to collapse
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
Click to expand...
Click to collapse
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0

jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0
Click to expand...
Click to collapse
Unplug USB before reboot in recovery.

Nice to see an update, and hopefully CM, surprised there hasnt been more active development with it being a GPE.

djkinetic said:
Nice to see an update, and hopefully CM, surprised there hasnt been more active development with it being a GPE.
Click to expand...
Click to collapse
I am trying to get device tree going but work has been killing me lately. When I get home my energy level isn't up to my want level to finish it...
Sent from my LG-D800 using XDA Premium 4 mobile app

jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0
Click to expand...
Click to collapse
Hi,
Would you mind sharing how you did a restore of TWRP 2.7.0.0? [I did the same thing...doh!] My tablet is running fine but I just "hang" when trying to reboot into recovery - even when not plugged into USB]. I'm not sure "HOW FAR" back I have to go to get TWRP working again...I image I don't have to start from scratch with loki...... What's the simplest way to get TWRP back. [BTW - I flashed the 2.7.0.1 zip file from within TWRP.]
Thanks!!
Rez

Rezinator said:
Hi,
Would you mind sharing how you did a restore of TWRP 2.7.0.0? [I did the same thing...doh!] My tablet is running fine but I just "hang" when trying to reboot into recovery - even when not plugged into USB]. I'm not sure "HOW FAR" back I have to go to get TWRP working again...I image I don't have to start from scratch with loki...... What's the simplest way to get TWRP back. [BTW - I flashed the 2.7.0.1 zip file from within TWRP.]
Thanks!!
Rez
Click to expand...
Click to collapse
use Flashify its free on googleplay download 2.7.0.0 flash it with flashify then back it up in flashify that way it can always be restored

jionny said:
downloaded TWRP 2.7.0.1 zip file flashed with flashify now stuck on LG screen,,,it will not power off any ideas? please....edit sigh dumb me I thought this was for v500 just noticed its v510..... how can I get back?
---------- Post added at 08:40 PM ---------- Previous post was at 08:22 PM ----------
sorry nevermind figured out how to do a restore of TWRP 2.7.0.0
Click to expand...
Click to collapse
jionny said:
use Flashify its free on googleplay download 2.7.0.0 flash it with flashify then back it up in flashify that way it can always be restored
Click to expand...
Click to collapse
WOW....That was easy Flashify is a new tool to me (so used to using recovery for all this...so when recovery is unavailable....it gets tricky)...Very cool app. I greatly appreciate your quick response. Back up and running and updating with latest CM nightly currently.
Thanks!!!

Link for seems to be broken. Anybody know where else I can download 2.7?

Link broken
The link to the downloads page still seems to be broken. Does anyone have a mirror up by chance?

There is a Link to the Homepage...in the first post ...you can get it there.....

robster23 said:
There is a Link to the Homepage...in the first post ...you can get it there.....
Click to expand...
Click to collapse
Recovery for our device is not available from the TWRP website. This was a custom version made by the OP.

OP will you update to V2.8.0.1?
Sent from my LG-V510 using XDA Free mobile app

chding said:
OP will you update to V2.8.0.1?
Sent from my LG-V510 using XDA Free mobile app
Click to expand...
Click to collapse
Been awhile but will update over the weekend. Will also post a restore to stock file so 8.3 GPE users can get ready for Lollipop.

Great to see you are still around, do you still have the tablet? If I remember you were thinking to sell it and get a v500
Sent from my LG-V510 using Tapatalk

cant update to TWRP 3.0.0 recovery

Hi, i tried updating my twrp recovery from 2.8.7 to 3.0.0, but when i rebooted my device, it gets stuck on the boot screen, never actually proceeding to recovery mode. All good, im still able to odin the old recovery. Anyone successfully updated to 3.0.0 ?
The way i flashed the new recovery was i selected the .img file in twrp and flashed into recovery partition.
Ive also tried flashing the .img in odin 3.0.7, but it didnt work aswell.

@ayeitschris, I have the same problem my friend. Has anyone figured a way yet?

Same issue.

Seems like other note 4 users are having the same issues as well:
http://forum.xda-developers.com/not...-utility-twrp-2-8-1-x-teamwin-t2956011/page56

yeah it will soft brick your recovery and you will have to odin 2.8.7.0 .

There's a fixed version posted in the twrp thread. I'm using 3.0 now and it's working very well

marseillesw said:
There's a fixed version posted in the twrp thread. I'm using 3.0 now and it's working very well
Click to expand...
Click to collapse
link?

marseillesw said:
There's a fixed version posted in the twrp thread. I'm using 3.0 now and it's working very well
Click to expand...
Click to collapse
Where is it?

Just flash it with the rashr app. U don't have to use odin when you have an existing recovery. Just flash over it via the app
---------- Post added at 02:56 AM ---------- Previous post was at 02:53 AM ----------
ayeitschris said:
Hi, i tried updating my twrp recovery from 2.8.7 to 3.0.0, but when i rebooted my device, it gets stuck on the boot screen, never actually proceeding to recovery mode. All good, im still able to odin the old recovery. Anyone successfully updated to 3.0.0 ?
The way i flashed the new recovery was i selected the .img file in twrp and flashed into recovery partition.
Ive also tried flashing the .img in odin 3.0.7, but it didnt work aswell.
Click to expand...
Click to collapse
I also have a T-Mobile note 4 and the recovery flashed perfectly. After you odin the first recovery you never have to use it again. Just use the rashr flashing app and you will never have one problem. The only time you will need odin is if you are going from twrp to cwm
---------- Post added at 02:57 AM ---------- Previous post was at 02:56 AM ----------
ayeitschris said:
Hi, i tried updating my twrp recovery from 2.8.7 to 3.0.0, but when i rebooted my device, it gets stuck on the boot screen, never actually proceeding to recovery mode. All good, im still able to odin the old recovery. Anyone successfully updated to 3.0.0 ?
The way i flashed the new recovery was i selected the .img file in twrp and flashed into recovery partition.
Ive also tried flashing the .img in odin 3.0.7, but it didnt work aswell.
Click to expand...
Click to collapse
Also do not flash a recovery update from your recovery

I have tried flashing it using odin, both stock and custom rom, as well as TWRP manager. 3.0.0 doesn't work. If I flash back to 2.8.7, all is fine. Apparently 3.0.0 doesn't work for the SM-N910T (T-Mobile) version. If anyone has had success with this model, please include links and detailed instructions as to how you successfully upgraded.

http://forum.xda-developers.com/showthread.php?p=65242953
---------- Post added at 09:55 PM ---------- Previous post was at 09:55 PM ----------
Hell-Razor said:
link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=65242953

Stock Recovery: Lenovo K4 Note 6.0

Lenovo K4 Note: Rooted
Recovery: TWRP 3.0.2
Android Version: 6.0
Stock Rom
a7010a48_s219_160810_row
I want to encrypt my phone, but when I do it nothing happens. Screen goes black, I waited for 5hrs .. still black screen.
I rebooted normally & saw in settings that device is not encrypted.
I am guessing this is happening because of TWRP.
Can anyone please upload stock recovery for above mentioned Android version?
Thank You.

Trushant said:
Lenovo K4 Note: Rooted
Recovery: TWRP 3.0.2
Android Version: 6.0
Stock Rom
a7010a48_s219_160810_row
I want to encrypt my phone, but when I do it nothing happens. Screen goes black, I waited for 5hrs .. still black screen.
I rebooted normally & saw in settings that device is not encrypted.
I am guessing this is happening because of TWRP.
Can anyone please upload stock recovery for above mentioned Android version?
Thank You.
Click to expand...
Click to collapse
Here you go. hit thanks if helped you.

iamironman91 said:
Here you go. hit thanks if helped you.
Click to expand...
Click to collapse
Hi. Thanks for replying.
I got following error in cmd while flashing:
writing 'recovery'...
FAILED <remote: image is not a boot image>
finished.

What's the code you put in adb
fastboot flash recovery recovery.img
Is this you used?

iamironman91 said:
What's the code you put in adb
fastboot flash recovery recovery.img
Is this you used?
Click to expand...
Click to collapse
Yes

Trushant said:
Yes
Click to expand...
Click to collapse
try this

iamironman91 said:
try this
Click to expand...
Click to collapse
Not working... same error.

Enable us debugging. Paste these codes in adb
fastboot erase recovery
fastboot flash recovery recovery.img
Let me know if works
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
Before that backup everything if something goes wrong

iamironman91 said:
Enable us debugging. Paste these codes in adb
fastboot erase recovery
fastboot flash recovery recovery.img
Let me know if works
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
Before that backup everything if something goes wrong
Click to expand...
Click to collapse
Same error.
The problem is with the recovery image.
Thank you for trying to help me.
Any senior member out there? Your assistance will be very much appreciated.

:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution

iamironman91 said:
:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution
Click to expand...
Click to collapse
I tried to flash only recovery via SP Tools but it sent my phone in boot loop, had to flash whole rom to get it working again.

Trushant said:
I tried to flash only recovery via SP Tools but it sent my phone in boot loop, had to flash whole rom to get it working again.
Click to expand...
Click to collapse
Flash is ok? What android_n_setup.zip version you have?after flashing,you can boot to stock?i think note the twrp causing this..

i want stock recovery s232

can i delete TWRP after installed

Telegram link for Lenovo k4 note plzz

@k4note

iamironman91 said:
:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution
Click to expand...
Click to collapse
Bro, just ask him to unzip "recovery.zip" and then use the "recovery.img" for flashing!
Simple thing, yet eazy to miss.

How to root stock rom?

Hello,
i'm on Oxygen OS4.0.2, is there any way to root my phone without unlocking the bootloader and flashing twrp then superuser... etc?

bfm.95 said:
Hello,
i'm on Oxygen OS4.0.2, is there any way to root my phone without unlocking the bootloader and flashing twrp then superuser... etc?
Click to expand...
Click to collapse
Nope

the_rooter said:
Nope
Click to expand...
Click to collapse
Well, I read somewhere that you can root it without pc and with stock recovery by downloading a zip and renaming it to update.zip then flash it, is that right?
**UPDATE**
i unlocked my bootloader then flash twrp using the toolkit but when i boot to twrp recovery it stuck at logo screen, why?

bfm.95 said:
Well, I read somewhere that you can root it without pc and with stock recovery by downloading a zip and renaming it to update.zip then flash it, is that right?
**UPDATE**
i unlocked my bootloader then flash twrp using the toolkit but when i boot to twrp recovery it stuck at logo screen, why?
Click to expand...
Click to collapse
Learn adb fastboot and try that. 9 out of 10 times toolkits give issues.

the_rooter said:
Learn adb fastboot and try that. 9 out of 10 times toolkits give issues.
Click to expand...
Click to collapse
I think the problem is with this version of twrp because I tried to flash it without the toolkit and I got the same result, probably it's not working on 4.0.2

bfm.95 said:
I think the problem is with this version of twrp because I tried to flash it without the toolkit and I got the same result, probably it's not working on 4.0.2
Click to expand...
Click to collapse
What version did you TWRP flash?
---------- Post added at 09:44 PM ---------- Previous post was at 09:44 PM ----------
the_rooter said:
Learn adb fastboot and try that. 9 out of 10 times toolkits give issues.
Click to expand...
Click to collapse
Why would toolkits give issues!!?

Midomad said:
What version did you TWRP flash?
Click to expand...
Click to collapse
I flashed 3.0.3-1 the one which came with the toolkit

bfm.95 said:
I flashed 3.0.3-1 the one which came with the toolkit
Click to expand...
Click to collapse
How much time did you wait for TWRP to boot?
A device that is 30 gb full could take 10 minutes to boot!

Midomad said:
How much time did you wait for TWRP to boot?
Click to expand...
Click to collapse
I didn't know that I should wait! But I waited like 2-3 mins

bfm.95 said:
I didn't know that I should wait! But I waited like 2-3 mins
Click to expand...
Click to collapse
Just wait a few more time and let me know..

Midomad said:
Just wait a few more time and let me know..
Click to expand...
Click to collapse
Okay I'll try when I'm home

Midomad said:
What version did you TWRP flash?
---------- Post added at 09:44 PM ---------- Previous post was at 09:44 PM ----------
Why would toolkits give issues!!?
Click to expand...
Click to collapse
For your toolkit issue. I seen far too many times toolkit mess up for a user, and not work, and the user comes here looking for help to get their phone fixed, and they didn't take the time to learn adb/fastboot. Toolkits can be a good thing, but at the same time they can give a issue.

Midomad said:
Just wait a few more time and let me know..
Click to expand...
Click to collapse
I flashed twrp 3.0.3.0 and it worked but I couldn't flash supersu from my phone or adb sideload
**UPDATE**
i put the supersu zip in my phone but i can't reach the internal memory in twrp also i couldn't flash using sideload, when i type adb devices i get message (list of devices attached) then i went to enable mtp from twrp and typed adb devices and it recognized now, then i went to flash supersu via sideload and i got this message (error: device not found)
so is there any way to flash supersu?
**update**
i flashed twrp 3.0.3-1 again and i waited more time and it worked and i flashed supersu and everything works , sorry for being annoying and thanks for everything guys

October update is out - QP1A.190711.148

October 2019 Release | Q 10 - Q Release 2 - QP1A.190711.148 | Open Market
https://www.essential.com/developer/current-builds

chanh2018 said:
October 2019 Release | Q 10 - Q Release 2 - QP1A.190711.148 | Open Market
https://www.essential.com/developer/current-builds
Click to expand...
Click to collapse
Won't root for me.

you mean magisk not working with this build?

mcdull said:
you mean magisk not working with this build?
Click to expand...
Click to collapse
No, it's not working for ME.
Sent from my PH-1 using XDA Labs

avd said:
Won't root for me.
Click to expand...
Click to collapse
Were you able to root the previous 10 build? I have the 148 rooted with Magisk canary, same as the previous two builds (just root, no TWRP). Not sure if it makes a difference, but I don't do OTA updates. I always download and flash the OTA image in adb sideload, then flash the patched boot.img in fastboot.

kt-Froggy said:
Were you able to root the previous 10 build? I have the 148 rooted with Magisk canary, same as the previous two builds (just root, no TWRP). Not sure if it makes a difference, but I don't do OTA updates. I always download and flash the OTA image in adb sideload, then flash the patched boot.img in fastboot.
Click to expand...
Click to collapse
oh cool, so flashing boot images work with the latest canary of MM?! will do that then this evening as well :fingers-crossed:

JimmyCash030 said:
oh cool, so flashing boot images work with the latest canary of MM?! will do that then this evening as well :fingers-crossed:
Click to expand...
Click to collapse
Yes, it does work for me. I've always been doing updates like this, on 9 and 10. Download both OTA and the full image, extract boot.img from the full image, patch it with Magisk, then sideload OTA image in adb, reboot, and finally fastboot flash the patched boot.img. Never had a problem. The only thing is that you have to use Magisk canary build with 10; stable or beta doesn't work.

kt-Froggy said:
Yes, it does work for me. I've always been doing updates like this, on 9 and 10. Download both OTA and the full image, extract boot.img from the full image, patch it with Magisk, then sideload OTA image in adb, reboot, and finally fastboot flash the patched boot.img. Never had a problem. The only thing is that you have to use Magisk canary build with 10; stable or beta doesn't work.
Click to expand...
Click to collapse
yeah worked for me as well with the latest canary MM !!

Magisk 19.4 works just fine on latest 148 build if need be I can upload magisk rooted boot. Img

https://www.androidfilehost.com/?fid=1899786940962605417
MD5:49484e6733bba257051eef831eb25689
This is for QP1A.19711.148
Magisk-Patched-Boot.img

allenjthomsen said:
https://www.androidfilehost.com/?fid=1899786940962605417
MD5:49484e6733bba257051eef831eb25689
This is for QP1A.19711.148
Magisk-Patched-Boot.img
Click to expand...
Click to collapse
getting back to the topic at hand, I flashed this, then TWRP on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now I got to plug this in and swap slots to reinstall TWRP.
Is possible that magisk and twrp are back to not playing nice to each other again?
(I'll test this out if I get a chance to swap slots)
---------- Post added at 11:11 AM ---------- Previous post was at 10:49 AM ----------
avd said:
getting back to the topic at hand, i flashed this, then twrp on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now i got to plug this in and swap slots to reinstall twrp.
Is possible that magisk and twrp are back to not playing nice to each other again?
(i'll test this out if i get a chance to swap slots)
Click to expand...
Click to collapse
now i'm just sitting here looking at the boot animation. Will let it go a little further to see if it starts.

Honestly i couldnt tell you i only rooted havent used twrp much yet because of the lack of android 10 custom roms havent seen a need to use it as of yet.
---------- Post added at 07:19 PM ---------- Previous post was at 07:18 PM ----------
And any further information on this would be great.

allenjthomsen said:
Honestly i couldnt tell you i only rooted havent used twrp much yet because of the lack of android 10 custom roms havent seen a need to use it as of yet.
---------- Post added at 07:19 PM ---------- Previous post was at 07:18 PM ----------
And any further information on this would be great.
Click to expand...
Click to collapse
pretty much everything for this phone resides in t.me/ESSENTIALPH1DEV

avd said:
getting back to the topic at hand, I flashed this, then TWRP on top of this.
Booted back into recovery.
Reflashed stock boot image.
Now I got to plug this in and swap slots to reinstall TWRP.
Is possible that magisk and twrp are back to not playing nice to each other again?
(I'll test this out if I get a chance to swap slots)
---------- Post added at 11:11 AM ---------- Previous post was at 10:49 AM ----------
now i'm just sitting here looking at the boot animation. Will let it go a little further to see if it starts.
Click to expand...
Click to collapse
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again

rignfool said:
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again
Click to expand...
Click to collapse
Flashing the patched image provided just sits there looking at the boot animation.
I'll play with it tonight.
It's a Sprint phone. Could that be the issue?
Sent from my PH-1 using XDA Labs

I flashed September build like this no problem however when I try and adb the October build I cannot get into recovery, when trying it just boots back into system however I can get into fastboot, any ideas?

I'm no expert but did this ans it worked:
1. In TWRP recovery (created nandroid and wiped cache)
2. Flashed full update zip from official download link, then TWRP, then wipe cache
3. Reboot system and let it settle
4. Reboot into TRWP and flashed Canary Channel zip file
5. Wipe cache
6. Reboot system
Hope this helps.

jionny said:
I flashed September build like this no problem however when I try and adb the October build I cannot get into recovery, when trying it just boots back into system however I can get into fastboot, any ideas?
Click to expand...
Click to collapse
Try using the fastboot image (not the OTA the image one) from the essential site.
Download it, remove the "fastboot or something wipe userdata maybe?" line from the flashall.bat script (or from flashall.sh if you're on Mac/Linux)
Then run the flashall.bat or flashall.sh script (again .bat for Win, .sh for the rest)
Should get you working again, albeit without root & twrp
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
rignfool said:
Thou shalt always flash thy magisk last...
Even if you already had magisk... Flash it again
Click to expand...
Click to collapse
? I always have trouble remembering, not anymore it seems

gavinfernandes2012 said:
Try using the fastboot image (not the OTA the image one) from the essential site.
Download it, remove the "fastboot or something wipe userdata maybe?" line from the flashall.bat script (or from flashall.sh if you're on Mac/Linux)
Then run the flashall.bat or flashall.sh script (again .bat for Win, .sh for the rest)
Should get you working again, albeit without root & twrp
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
I always have trouble remembering, not anymore it seems
Click to expand...
Click to collapse
Are you able to give more precise instructions on fastboot instructions?

jionny said:
Are you able to give more precise instructions on fastboot instructions?
Click to expand...
Click to collapse
Nevermind, got the instructions from essentials site. flashed via fastboot which erased everything had to do a complete setup again