Which is better?
I hate slim cases that are vulnerable to scratch....
Or plz recommend me another slim case.
I have the spigen and am very happy with it. I don't keep my keys in the same pocket as the phone but no scratches after a months use. Also not many fingerprints (and they wipe away nicely if there are any) on it and it has a nice grip to it.
I have the spigen thin and have the ringke slim on order. Reason being the bottom of the spigen is a bit uncomfortable to hold, for me it's the right pinky finger. The ringke goes all around so shouldn't have this problem.
I have dropped my 5X twice now onto concrete with the spigen. Not only does it scratch it dents like hell. Looks like a dog has chewed on the corners. From what i understand the ringke uses similar material.
If you want something that will take hits a bit better, i suggest look at something else. I'm gonna try take better care of my next one, as i really like these cases and the soft feel. Also like how the camera hump has good protection.
Edit: Didn't see the Nillkin part. I also have that case, the nature tpu. It's very thin and has dust flaps for charger and headphone. Don't use it anymore because the camera protection is no good (read non existent). If it protected the hump i'd consider using it. Also the sides are very flexible being so thin, it collects a lot of pocket crap.
Hyuk Ahn said:
Which is better?
I hate slim cases that are vulnerable to scratch....
Or plz recommend me another slim case.
Click to expand...
Click to collapse
Love the Ringke Slim. For a little more protection, the Diztronic TPU is good.
r.spanish said:
I have dropped my 5X twice now onto concrete with the spigen. Not only does it scratch it dents like hell. Looks like a dog has chewed on the corners. From what i understand the ringke uses similar material.
Click to expand...
Click to collapse
I don't have any experience with the Spigen, but after dropping my Ringke on several hard surfaces the case has held up great. No chunks or scratches to the surrounding TPU. After a few months, the clear plastic has a few faint scratches on the back but you can't notice them unless you catch it in the light just the right way.
Alcolawl said:
I don't have any experience with the Spigen, but after dropping my Ringke on several hard surfaces the case has held up great. No chunks or scratches to the surrounding TPU. After a few months, the clear plastic has a few faint scratches on the back but you can't notice them unless you catch it in the light just the right way.
Click to expand...
Click to collapse
You probably don't have the ringke slim. I don't think this thread is about the tpu versions.
peltus said:
You probably don't have the ringke slim. I don't think this thread is about the tpu versions.
Click to expand...
Click to collapse
My mistake, I keep confusing the Slim with the Fusion, which I have.
I went from Spigen slim to Nillkin slim because of the discomfort to my right pinky, similar to what was mentioned earlier. Not only is this not an issue on the Nillkin slim case, but the textured back feels nice in the hand. I haven't dropped my phone with either case yet, so I can't say how well the Nillkin holds up.
I've had the nillkin fit a few months but am looking for another case. I've loved it so far.... It's insanely thin and the cutoff are great and there dizzy covers, while slightly annoying, are ultimately a benefit. Unfortunately, it's thin and flexible and thus collects pocket longer like crazy. I have the clear version which is now discoloring quite a bit from hand oils and pockets. I loved this case up front (and it was dirt cheap) but it hasn't quite last line of hoped. I'm currently evaluating the diztronic TPU and ringke slim.
I would just choose Ringke because of the brand name.Reads more cool.
Ive just got myself a Ringke slim. It's better than Spigen because it covers the phone completely from all sides. The cutouts are perfect and donot hurt the little finger.
Related
Hi All,
I'm looking for a new case, I want it to fit my tight jeans front pocket (now I have the Wrapsol front and back SP on my N2 and the only downside is that the bezel is not protected).
I thought about the Mercury case or some slim bumper.
Any recommendation ?
Thanks
I would get the Boxwave bamboo case, i have it and it's good protection cause it has a lip that protrudes over the edges just enough to most likely protect your screen & scren protector and its like $7 us dollars
Sent from my revolution of technology: le Note II.
liamR said:
Hi All,
I'm looking for a new case, I want it to fit my tight jeans front pocket (now I have the Wrapsol front and back SP on my N2 and the only downside is that the bezel is not protected).
I thought about the Mercury case or some slim bumper.
Any recommendation ?
Thanks
Click to expand...
Click to collapse
Your best option is Case-Mate Tough http://forum.xda-developers.com/showpost.php?p=37884573&postcount=105
Thank you guys for the suggestions, but I'm looking for a real slim case, I know that it will be with the cost of the protection but for that I have the UAG. I looking for a case with the Mercury dimensions~ but maybe with higher quality.
There is no other alternative. The slimmest you can go is skin-like TPU case. It will not offer much of a protection, and I had Mercury before - sorry, but its a slippery, glittery case with hardly any lip protection. The *only* relatively slim case that will offer you a drop protection, and I mean to the point that it will survive occasional drop on a concrete or stone pavers its Tough. There are a lot of other cases that are kind of slim and will offer you a decent drop protection, better than Tough, but nothing I have seen that comes close to slimness of Tough (check out my review link in signature for reviews of all the popular cases and even face off comparison).
The title of your thread is "Slim lightweight case with maximum protection ?". I guess "maximum protection" is a subjective term. I don't think the Mercury case (or any TPU case) or a bumper case offers that. If you want slim + max protection, then I strongly recommend the Speck Candyshell. The Samsung Protective Cover + is also good combo of slim and protection.
I didn't make this video.
Have you seen this thread? http://forum.xda-developers.com/showthread.php?t=2192013
Not sure about the protection as I just ordered mine today, but for $2.25 probably wouldn't hurt to try it out. Looks very, very slim in the pics. I also have the Speck Candyshell, very slim case. My only gripe about is the rubber around the lip is peeling and starting to look funky. It wasn't a cheap case, so I'm a little disappointed in that.
Captivate-me said:
I also have the Speck Candyshell, very slim case. My only gripe about is the rubber around the lip is peeling and starting to look funky. It wasn't a cheap case, so I'm a little disappointed in that.
Click to expand...
Click to collapse
I completely agree. The rubber peeling on my case is minor and purely cosmetic (doesn't affect protection). It compliments all the scratches on the glossy black plastic to give the case a vintage look LOL. I got my case in December 2012.
Captivate-me said:
Have you seen this thread? http://forum.xda-developers.com/showthread.php?t=2192013
Not sure about the protection as I just ordered mine today, but for $2.25 probably wouldn't hurt to try it out. Looks very, very slim in the pics. I also have the Speck Candyshell, very slim case. My only gripe about is the rubber around the lip is peeling and starting to look funky. It wasn't a cheap case, so I'm a little disappointed in that.
Click to expand...
Click to collapse
Mine is in. I would consider the protection minimal, less than the Mercury, because the case is mostly open on both ends. I like the material, and it is slim. However it only offers scratch protection on the back of the case, no real drop protection.
i have to agree with vectron. the other two cases mentioned seem nice, but if you want quality, i would go with the Case-Mate Tough. Like vectron, I have many cases as well including the UAG, Tough, Mercury, Cruzerlite TPU (like the boxwave mentioned), Duzign Valor Slim, Elago Slim cases (black one is just like the $2.25 one mentioned), and the ITSkins Lava. The top 3 for protection in this order and feel are the 1) Casemate Tough (slim/protective) 2) UAG (slightly bulky (but skinnier than the rest of the cases out there like defender and commuter etc) with max protection)) 3) Duzign Valor (this case is only $6 and the feel is a soft matte/rubbery feel that is not slippery at all- the colors are amazing and I already dropped my phone on concrete with it from 4 feet- the case is smart- it has more than enough edge protection to protect the face and it protected my phone from any major damage- however, the downside is the top and bottom like all the slim cases (Elago, Spigen Ultra Thin, $2.25 case, etc) is that the top and bottom are not covered. My phone landed on the top unfortunately, and only a tiny scratch happened- the rest of the phone was unaffected and the case also was unaffected).
So, for every day use for a careful guy, Duzign is perfect- they also come in many different colors/feels. For every day use for a slightly clumsy person (I was wearing the wrong jacket with really open pockets when I dropped mine and was shaking my jacket up without realizing how big my pockets were and my phone jumped out, lol), I would go with the Case-Mate Tough- it's my current go to case at the moment. Finally, for a guy who just throws his phone onto the table or doesn't care if it falls down from time to time, the UAG is the best. That thing is beautiful and a beast- I have the white one and my Note 2 is white.
Here's a link for all the Duzign cases- they even have a leather one now: http://www.amazon.com/s/ref=sr_nr_n...duzign&ie=UTF8&qid=1363965798&rnid=2941120011
here are my pics of all my cases so you can compare:
Top Row (Left to Right): Custom Case-Mate Tough, Custom Case-Mate Tough, Case-Mate Tough (original- my current fav), Mercury TPU, Cimo TPU, Cruzerlite TPU
Bottom Row (Left to Right): UAG Navigator, Elago Slim, Elago Slim, Duzign Valor, Duzign Valor
There's a case called six abundant. I'm using it. It's kind of like the rearth slim case but it offers more eprotection especially for the top and bottom bezel. It was only $10.
Sent from my SCH-I605 using Tapatalk 2
opasha said:
i have to agree with vectron. the other two cases mentioned seem nice, but if you want quality, i would go with the Case-Mate Tough. Like vectron, I have many cases as well including the UAG, Tough, Mercury, Cruzerlite TPU (like the boxwave mentioned), Duzign Valor Slim, Elago Slim cases (black one is just like the $2.25 one mentioned), and the ITSkins Lava. The top 3 for protection in this order and feel are the 1) Casemate Tough (slim/protective) 2) UAG (slightly bulky (but skinnier than the rest of the cases out there like defender and commuter etc) with max protection)) 3) Duzign Valor (this case is only $6 and the feel is a soft matte/rubbery feel that is not slippery at all- the colors are amazing and I already dropped my phone on concrete with it from 4 feet- the case is smart- it has more than enough edge protection to protect the face and it protected my phone from any major damage- however, the downside is the top and bottom like all the slim cases (Elago, Spigen Ultra Thin, $2.25 case, etc) is that the top and bottom are not covered. My phone landed on the top unfortunately, and only a tiny scratch happened- the rest of the phone was unaffected and the case also was unaffected).
So, for every day use for a careful guy, Duzign is perfect- they also come in many different colors/feels. For every day use for a slightly clumsy person (I was wearing the wrong jacket with really open pockets when I dropped mine and was shaking my jacket up without realizing how big my pockets were and my phone jumped out, lol), I would go with the Case-Mate Tough- it's my current go to case at the moment. Finally, for a guy who just throws his phone onto the table or doesn't care if it falls down from time to time, the UAG is the best. That thing is beautiful and a beast- I have the white one and my Note 2 is white.
Here's a link for all the Duzign cases- they even have a leather one now: http://www.amazon.com/s/ref=sr_nr_n...duzign&ie=UTF8&qid=1363965798&rnid=2941120011
here are my pics of all my cases so you can compare:
Top Row (Left to Right): Custom Case-Mate Tough, Custom Case-Mate Tough, Case-Mate Tough (original- my current fav), Mercury TPU, Cimo TPU, Cruzerlite TPU
Bottom Row (Left to Right): UAG Navigator, Elago Slim, Elago Slim, Duzign Valor, Duzign Valor
Click to expand...
Click to collapse
This is very helpful information. Thank you :good:
How are the Tough dimensions compare to the Mercury TPU case (It seems like they are the same except from the thickness ) ?
liamR said:
This is very helpful information. Thank you :good:
How are the Tough dimensions compare to the Mercury TPU case (It seems like they are the same except from the thickness ) ?
Click to expand...
Click to collapse
You're very welcome. The Mercury is very similar in dimensions to the Tough. However the Mercury doesn't protect very well on the edges around the front nor does it line up perfectly like the Tough.
I want a very thin case/shell (not a TPU) that protects also the bottom chrome part
vectron said:
Your best option is Case-Mate Tough http://forum.xda-developers.com/showpost.php?p=37884573&postcount=105
Click to expand...
Click to collapse
like this one.....
Just placed an order for the Black Case-Mate Tough. I will come back with my impression.
Thank you all.
The Ghostek Bullet case ($14.95 on Amazon) might just be my favorite daily case. However, there are some things you should be aware of...
Pros:
The bottom of the case is completely flat and can be stood up on all sides if propped properly (Has a lot of straight edges).
Power button/ir blaster is unobstructed.
Volume rocker gives a very satisfying click when depressed.
Very sturdy design (The case and phone will survive several drops without shattering to pieces).
Has a nifty kick-stand (Case can be used as an impromptu tripod).
Very easy to remove and to install.
Camera portions have deep ridges (protects the lens from scratches).
Very modular (Consists of 3 pieces [top, middle, and rear]).
Easy to grip.
Not too pricy.
Cons:
Top, bottom, both sides of the screen, and both camera areas are not sealed from dust (There's a lot of gaps between portions of the case and the phone).
Did not come with a screen protector as advertized (maybe a miscommunication from the seller).
A bit bulky compared to a lot of cases out there.
Fingerprint and dust magnet.
Portrait View
Landscape View
In pieces
Gaps for dust and debris on Rear cameras
Huge gap on bottom of the volume and micro-usb ports.
Gap near the power button.
Conclusion:
Now we all know our awesome phone is aesthetically curved and is very thin. In an attempt to protect this case from falls, this case makes the phone bulker and have flatter edges.
Although this case will let in lots of dust and debris, this is my favorite case to date. It's very durable and very serviceable. I'm sure with some Sugru or some silicone sealant, all the dust issues can be addressed, making this the perfect case.
thats a nice review.. however, i read in a few places that not all 4 corners are a perfect fit. the fit for one of the corners is not perfect i heard. did u come across anythin like that?
i got a love mei case.. but i get an annoying rainbow-like streak on my screen. it happens when i tighten the screws and the screen of the case and m8 screen come into contact. can i use this case with nilkin 9H tempered glass screen protector?
this is a good case but imo it is a bit too bulky for daily use. and the gaps also makes a lot of dust go in and there is a slight chance of scratching the phone if not kept clean from time to time,
Rantrave07 said:
this is a good case but imo it is a bit too bulky for daily use. and the gaps also makes a lot of dust go in and there is a slight chance of scratching the phone if not kept clean from time to time,
Click to expand...
Click to collapse
so what slim dustproof case do u suggest.. that are shockproof to a certain extent?
Spigen slim armor + nilkin temprerd glass... is that a good combo?
CyrilBritto said:
so what slim dustproof case do u suggest.. that are shockproof to a certain extent?
Spigen slim armor + nilkin temprerd glass... is that a good combo?
Click to expand...
Click to collapse
well thats obviously a good combo that you mentioned. but if you want a little more slimmer that i suggest supcase unicorn beetle with a tempered glass protector. i am using UAG scout case with a glass protector. this case is quite nice too. :good:
Rantrave07 said:
well thats obviously a good combo that you mentioned. but if you want a little more slimmer that i suggest supcase unicorn beetle with a tempered glass protector. i am using UAG scout case with a glass protector. this case is quite nice too. :good:
Click to expand...
Click to collapse
I heard the unicorn beetle case covers the lens quite a lot and it affects photography when its late evenings... low light basically.. what do u think..
and someone posted this about the nillkin 9H screen protector.
"Worst ever tempered glass used , after application everything was good but when I removed it after a month it took out the oleophobic coating of the display now I can't use my phone without screen protector I guess the adhesive is too strong better I use your phone without this "
whats ur take on this?
CyrilBritto said:
I heard the unicorn beetle case covers the lens quite a lot and it affects photography when its late evenings... low light basically.. what do u think..
and someone posted this about the nillkin 9H screen protector.
"Worst ever tempered glass used , after application everything was good but when I removed it after a month it took out the oleophobic coating of the display now I can't use my phone without screen protector I guess the adhesive is too strong better I use your phone without this "
whats ur take on this?
Click to expand...
Click to collapse
i have read the same about nilkin protector. there are plenty of other brands i heard Zagg, skinomi, noot, intelliarmor etc. all has good and bad reviews. i personally use a slim glass protector from retail store (forgot the brand name). but i maybe switching to a full glass protector too. my personal preference is Zagg as it covers almost the full front except the speaker grills. http://www.amazon.com/ZAGG-InvisibleShield-Glass-Screen-Protector/dp/B00JZYF7QO/ref=sr_1_16?ie=UTF8&qid=1422376922&sr=8-16&keywords=tempered+glass+protector+m8
but supcase i don't think it cause image disturbance. in some cases when using flash some problems occurred. i think someone mentioned it was only on the clear back version. In the black\black version i think it does not happen. i am not sure as i am not using one currently.
I recently dropped my phone/case and the frame split ?.
I've never had an issue with the case fitment. It's a snug fit and you'll have to uncomfortably stretch the frame to get it on.
Got a pretty good replacement on eBay. As per my original case, I taped the openings and made cut outs of the ports to prevent scratches when plugging things in.
I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?
rgs2 said:
I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?
Click to expand...
Click to collapse
lol, I just posted about a sale on this one, it was 30 but a new seller has it for 25 including shipping.
It is about 9 grams according to the seller page, but it is bareback. I got the leather though, so that is what I was looking for. Also it looks like it is an officially licensed lg case so it should fit the curve perfect.
Once I get mine in I will do a review. I hope this helps:highfive:
Thanks. I'm looking forward to your review.
What my knowledge and experience say is that the "revolution" case is super rugged, protective and durable it has a *screen protector and is impact shock and water resistant, ( will fit leather backing) its also light in weight and very much secured.
For this situation,a tpu case would a good choice.
I've got the diztronic. While nice and adds good protection I think it's too thick and heavy. Really takes away from the elegance of the G4. I've ordered the Nilkin Nature and heard it is very light and thin. Not much if any drop protection, but added grip and scratch protection
jbdan said:
I've got the diztronic. While nice and adds good protection I think it's too thick and heavy. Really takes away from the elegance of the G4. I've ordered the Nilkin Nature and heard it is very light and thin. Not much if any drop protection, but added grip and scratch protection
Click to expand...
Click to collapse
Diztronic is one of my favourites. Been using it on my Nexus 5 for more than a year, dropped it numerous times and nothing ever happened. For the G4 however, I ordered Ringke Slim, which provides only basic protection, as I wanted something slimmer. Haven't received it yet, but if I'm not satisfied with it, I'm gonna go with Diztronic again.
rgs2 said:
I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?
Click to expand...
Click to collapse
I have the same case as you. I don't mind the weight too much, but I agree that it does add more than i expected. My phone looks like one of those leather couches with the plastic covering it .
inpherknow said:
I have the same case as you. I don't mind the weight too much, but I agree that it does add more than i expected. My phone looks like one of those leather couches with the plastic covering it .
Click to expand...
Click to collapse
Good comparison! Now I can't look at it without thinking about those plastic covered couches.
benmarc said:
What my knowledge and experience say is that the "revolution" case is super rugged, protective and durable it has a screen protector and is impact shock and water resistant, ( will fit leather backing) its also light in weight and very much secured.
Click to expand...
Click to collapse
Don't care for the looks but I like the rest of what you said. I'll check it out.
0rigin said:
Diztronic is one of my favourites. Been using it on my Nexus 5 for more than a year, dropped it numerous times and nothing ever happened. For the G4 however, I ordered Ringke Slim, which provides only basic protection, as I wanted something slimmer. Haven't received it yet, but if I'm not satisfied with it, I'm gonna go with Diztronic again.
Click to expand...
Click to collapse
Interesting. Looking forward to your comments on the Ringke.
james491225 said:
For this situation,a tpu case would a good choice.
Click to expand...
Click to collapse
Maybe so. Can you recommend a good one?
I picked up a basic Insignia™ brand case at Best Boy. Good edge coverage, snug fit and all cases should have something very close to what has been incorporated into this design -
actual textured grip enhancement on the side-edges. I've been *****in about this for years and here it finally is . . . on a low cost case.
The Spigen Exact Fit is my fave. Super thin, protects all sides. Cheap too but quality. It is a hard shell case. I dislike the TPU cases on anything other than tablets.
I had Ringke before but its coated plastic. Eventually the color starts to wear off. I had a metallic gray and it was black underneath.
The spigen is a solid color throughout.
The only thing I dislike is it is slick. I had a Incipio Feather on my G2 and it had a rubber type coating that I prefer. But Incipio isnt making a Feather case so the Spigen Exact Fit is thr best choice IMO.
I've got the Ringke Slim case. If you're looking for a very slim, not in the way case, this is a very good choice. Very tight fit with a slight lip so the screen doesn't touch whatever you put it on when placed face down. I love it since it barely adds any size or weight while still offering some protection. Only downside is it's very, very difficult to take off since it's a tight fit. If you're planning on swapping out batteries often or changing backs, this case may not be the best option.
Easy Removal and Lightweight??
This Ringke looks to be lightweight, and easy to remove. I need both of these abilities with my G4, because I replace the battery at least once a day. Does anyone know of any other cases that are both lightweight and easy to remove (I have the tan leather backed version from T-Mobile)??
The UAG is surprisingly lightweight considering the protection it provides. I love it.
Sent from my LG-H811 using XDA Free mobile app
I have verus verge, and though it fits perfect with all cuts and it is rugged and good finish. It does add a heft to device.
jaggrey said:
The UAG is surprisingly lightweight considering the protection it provides. I love it.
Sent from my LG-H811 using XDA Free mobile app
Click to expand...
Click to collapse
Looks very interesting but I wish they would tell us the weight.
Ringke Slim and Spigen Exact Fit are the same style hard cases.
I chose the Spigen because I didn't like the lines in the corner of the Ringke Slim, or the speaker cut out.
The Spigen, IMO, looks better. It also comes in Teal.
Hi, i`ve been searching for a transparent case for OP3. I want to buy the soft gold version, it looks really beauty. I don`t like to buy a beautyful phone to cover with a case and looks like any other phone. But i priorize protection too. I found a transparent case by Nilkin at AliExpress, but i don`t know if it`s a good case. What do you recommend?
Orzly Flexicase
The best transparent case which is also still pretty protective is probably the ringke fusion
https://www.amazon.com/gp/aw/d/B01HBZYWLE/
i agree with the orzly flex case, it does not give much bulk but can protect too
2x4 said:
The best transparent case which is also still pretty protective is probably the ringke fusion
https://www.amazon.com/gp/aw/d/B01HBZYWLE/
Click to expand...
Click to collapse
Ringke fusion is an amazing case for the money. I'm rocking it right now. I got the Pleson TPU case initially, but this Ringke just blows it out of the water. Very very well thought out. Probably the best TPU case I've ever owned for any phone. I religiously buy TPU as I have found it protects phones much better than any Otterbox, or anything with a "hard" cover. The hard covers all create a much higher impact in my personal opinion on the phone. The TPU absorbs the impact, instead of transferring it into the device. Never broke a single screen/phone wearing a TPU case, and I'm rough with my phones. I take them dirt biking on trails and on the MX course. I've crashed countless times. Never had a single issue.
The only thing a TPU case can't protect you from, is getting drunk and getting in the river and forgetting your phone was in your pocket. I'll miss you 1+1, I'll never forget you....
edit: hey, i'm in ATX too! hello 1+3 friend
sHockz420 said:
Ringke fusion is an amazing case for the money. I'm rocking it right now. I got the Pleson TPU case initially, but this Ringke just blows it out of the water. Very very well thought out. Probably the best TPU case I've ever owned for any phone. I religiously buy TPU as I have found it protects phones much better than any Otterbox, or anything with a "hard" cover. The hard covers all create a much higher impact in my personal opinion on the phone. The TPU absorbs the impact, instead of transferring it into the device. Never broke a single screen/phone wearing a TPU case, and I'm rough with my phones. I take them dirt biking on trails and on the MX course. I've crashed countless times. Never had a single issue.
The only thing a TPU case can't protect you from, is getting drunk and getting in the river and forgetting your phone was in your pocket. I'll miss you 1+1, I'll never forget you....
edit: hey, i'm in ATX too! hello 1+3 friend
Click to expand...
Click to collapse
hello from ATX! I had the pleson (clear) case first too, and while it's a great looking case I agree the best TPU slim case I've found is the Ringke one so far as well (and i've tried a good handful...)
I have the Orzly flexicase. It's look and feel is just great.
I've got the Pleson and the Ringke. It took some getting used to but I like my Ringke one more, harder plastic on back with tpu sides is nice
I have the Orzly Flexicase also. Love it. It isn't too thin or thick. I dropped my phone numerous times already. Haven't damaged it yet. (knock on wood)
I have a nillkin nature case since november, it's still great, not any scratch and protects my phone well, but it is becoming "yellowish", it's not as transparent as on the beginning.
Nillkins transparent tpu case is great. I"ve been using it since a few months. It's super slim compared to my other noname TPU case, has great grip dou to its sides. I've been using a case like this on my last 2 phones, will get one for the next one for sure.
I'm using stock just fine.
I am using Ringke fusion, it's nice but the rear is a fingerprint magnet.. It is getting dirty very fast.
I've bought orzly flexicase, will compare it with the Ringke one when I receive it.
Also for me the best is the Nillkin tpu case, very slim and transparent that show the device without cover it.
That cover have also a protection for the hole of type c cable.
For me official curved tempered glass with poetic affinity case is perfect
I have the spigen ultra hybrid and it's great. Also fits snugly with the orzly tgsp, no issues.
Loumier said:
Hi, i`ve been searching for a transparent case for OP3. I want to buy the soft gold version, it looks really beauty. I don`t like to buy a beautyful phone to cover with a case and looks like any other phone. But i priorize protection too. I found a transparent case by Nilkin at AliExpress, but i don`t know if it`s a good case. What do you recommend?
Click to expand...
Click to collapse
I've been using the official transparent case from OnePLus and it's good. No yellowish tint so far in 5 months.
I'm using spigen hybrid ultra clear case and it's incredible, fits really well and dust doesn't get under the case. Really good.
What is the Slimmest grippiest case with a lip for the oneplus3?
I want the camera to have protection but i want a very slim and not that wobbly kind of case. I mean a tpu that is tooooo soft..
Ringke then.
Spigen rugged armor. Just got it. It's slim enough and it's got the perfect amount of lip protection for both the camera and the screen. Bonus : it's a looker.
The clear Ringke Fusion is thin, but solid. It also has little 'nubs' on the bottom that don't just keep the camera bump protected, but slightly lift the whole case off the surface/table/whatever. If anything, I wish the cutout for the headphone jack was just a bit bigger. I hate cases, in general, but this one is pretty good.
adam74251 said:
Spigen rugged armor. Just got it. It's slim enough and it's got the perfect amount of lip protection for both the camera and the screen. Bonus : it's a looker.
Click to expand...
Click to collapse
Ive looked at this case and i have seen similar that is diztronic and Tudia arch, i want it to bw tight slim and grippy.
How do these compare?
I havet tested cases with the nubs on the back corners but i dont need that kind of protection..
markusviktorius said:
Ive looked at this case and i have seen similar that is diztronic and Tudia arch, i want it to bw tight slim and grippy.
How do these compare?
I havet tested cases with the nubs on the back corners but i dont need that kind of protection..
Click to expand...
Click to collapse
I don't have any experience with either of them but I did consider them both when I was looking. They are all smooth TPU cases so expect them to have a similar kind of protection and texture. My phone has much more grip with a TPU case than naked so I don't think you'll have much issue with any one of these cases. Just get whichever one appeals the most to you.
rhino shield? grippy and quite slim
I'm using the POETIC Affinity Black/Clear - very happy with it.